wirtz
/
uClock
mirror of https://github.com/midilab/uClock
1
0
Fork 0
Code Issues Releases Wiki Activity

initial engine rewrited for avr and arm platforms. missing the sync part

Browse Source
pull/5/head
midilab 3 years ago
parent 82c13c4e21
commit 635c42de41
2 changed files with 74 additions and 80 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 146
      src/uClock.cpp
  2. 6
      src/uClock.h

146
src/uClock.cpp
Unescape View File

@ -1,8 +1,7 @@
/*!
* @file uClock.cpp
* Project BPM clock generator for Arduino
* @brief A Library to implement BPM clock tick calls using hardware timer1 interruption. Tested on ATmega168/328, ATmega16u4/32u4 and ATmega2560.
* Derived work from mididuino MidiClock class. (c) 2008 - 2011 - Manuel Odendahl - wesen@ruinwesen.com
* @brief A Library to implement BPM clock tick calls using hardware timer interruption. Tested on ATmega168/328, ATmega16u4/32u4 and ATmega2560.
* @version 0.10.6
* @author Romulo Silva
* @date 13/03/2022
@ -28,16 +27,6 @@
*/
#include "uClock.h"
// pickup a avr timer to make use.
// pickup only one!
// try to avoid timer0, only use it if you know what you are doing.
// 0 = delay(), millis() e micros()
// 1 = Servo.h library(any other?)
// 2 = tone()
//#define AVR_TIMER_0
#define AVR_TIMER_1
//#define AVR_TIMER_2
//
// Timer setup for work clock
//
@ -46,68 +35,37 @@ IntervalTimer _uclockTimer;
void uclockISR();
void uclockInitTimer()
{
_uclockTimer.begin(uclockISR, 16);
ATOMIC(
// begin at 120bpm (20833us)
_uclockTimer.begin(uclockISR, 20833);
// Set the interrupt priority level, controlling which other interrupts
// this timer is allowed to interrupt. Lower numbers are higher priority,
// with 0 the highest and 255 the lowest. Most other interrupts default to 128.
// As a general guideline, interrupt routines that run longer should be given
// lower priority (higher numerical values).
_uclockTimer.priority(0);
)
}
#else
void uclockInitTimer()
{
#if defined(AVR_TIMER_0)
ATOMIC(
// Timer0 init
TCCR0A = 0;
TCCR0B = 0;
TCNT0 = 0;
// set compare match register for 62500 Hz increments
// = 16000000 / (1 * 62500) - 1 (must be <256)
OCR0A = 255;
// turn on CTC mode
TCCR0B |= (1 << WGM02);
// Set CS02, CS01 and CS00 bits for 1 prescaler
TCCR0B |= (0 << CS02) | (0 << CS01) | (1 << CS00);
// enable timer compare interrupt
TIMSK0 |= (1 << OCIE0A);
)
#endif
#if defined(AVR_TIMER_1)
ATOMIC(
// Timer1 init
TCCR1A = 0;
TCCR1B = 0;
TCNT1 = 0;
// set compare match register for 62500 Hz increments
// = 16000000 / (1 * 62500) - 1 (must be <65536)
OCR1A = 255;
// begin at 120bpm (48.0007680122882 Hz)
TCCR1A = 0; // set entire TCCR1A register to 0
TCCR1B = 0; // same for TCCR1B
TCNT1 = 0; // initialize counter value to 0
// set compare match register for 48.0007680122882 Hz increments
OCR1A = 41665; // = 16000000 / (8 * 48.0007680122882) - 1 (must be <65536)
// turn on CTC mode
TCCR1B |= (1 << WGM12);
// Set CS12, CS11 and CS10 bits for 1 prescaler
TCCR1B |= (0 << CS12) | (0 << CS11) | (1 << CS10);
// Set CS12, CS11 and CS10 bits for 8 prescaler
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
// enable timer compare interrupt
TIMSK1 |= (1 << OCIE1A);
)
#endif
#if defined(AVR_TIMER_2)
ATOMIC(
// Timer2 init
TCCR2A = 0;
TCCR2B = 0;
TCNT2 = 0;
// set compare match register for 62500 Hz increments
// = 16000000 / (1 * 62500) - 1 (must be <256)
OCR2A = 255;
// turn on CTC mode
TCCR2B |= (1 << WGM22);
// Set CS22, CS21 and CS20 bits for 1 prescaler
TCCR2B |= (0 << CS22) | (0 << CS21) | (1 << CS20);
// enable timer compare interrupt
TIMSK2 |= (1 << OCIE2A);
)
#endif
}
#endif
@ -195,6 +153,50 @@ void uClockClass::pause()
}
}
void uClockClass::setTimerTempo(float bpm)
{
// 96 ppqn resolution
uint32_t tick_us_interval = (60000000 / 96 / bpm)*4;
#if defined(TEENSYDUINO) && !defined(__AVR_ATmega32U4__)
ATOMIC(
_uclockTimer.update(tick_us_interval);
)
#else
float tick_hertz_interval = 1/((float)tick_us_interval/1000000);
uint32_t ocr;
uint8_t tccr = 0;
// 16bits avr timer setup
if ((ocr = AVR_CLOCK_FREQ / ( tick_hertz_interval * 1 )) < 65535) {
// Set CS12, CS11 and CS10 bits for 1 prescaler
tccr |= (0 << CS12) | (0 << CS11) | (1 << CS10);
} else if ((ocr = AVR_CLOCK_FREQ / ( tick_hertz_interval * 8 )) < 65535) {
// Set CS12, CS11 and CS10 bits for 8 prescaler
tccr |= (0 << CS12) | (1 << CS11) | (0 << CS10);
} else if ((ocr = AVR_CLOCK_FREQ / ( tick_hertz_interval * 64 )) < 65535) {
// Set CS12, CS11 and CS10 bits for 64 prescaler
tccr |= (0 << CS12) | (1 << CS11) | (1 << CS10);
} else if ((ocr = AVR_CLOCK_FREQ / ( tick_hertz_interval * 256 )) < 65535) {
// Set CS12, CS11 and CS10 bits for 256 prescaler
tccr |= (1 << CS12) | (0 << CS11) | (0 << CS10);
} else if ((ocr = AVR_CLOCK_FREQ / ( tick_hertz_interval * 1024 )) < 65535) {
// Set CS12, CS11 and CS10 bits for 1024 prescaler
tccr |= (1 << CS12) | (0 << CS11) | (1 << CS10);
} else {
// tempo not achiavable
return;
}
ATOMIC(
TCCR1B = 0;
OCR1A = ocr-1;
TCCR1B |= (1 << WGM12);
TCCR1B |= tccr;
)
#endif
}
void uClockClass::setTempo(float bpm)
{
if (mode == EXTERNAL_CLOCK) {
@ -205,13 +207,9 @@ void uClockClass::setTempo(float bpm)
return;
}
tempo = bpm;
setTimerTempo(bpm);
ATOMIC(
//interval = (freq_resolution / (tempo * 24 / 60)) - drift;
//interval = 62500 / (tempo * 24 / 60) - drift;
interval = (uint16_t)((156250.0 / tempo) - drift);
)
tempo = bpm;
}
float uClockClass::getTempo()
@ -223,9 +221,9 @@ float uClockClass::getTempo()
}
if (acc != 0) {
// get average interval, because MIDI sync world is a wild place...
//tempo = (((float)freq_resolution/24) * 60) / (float)(acc / EXT_INTERVAL_BUFFER_SIZE);
////tempo = (float)((((float)FREQ_RESOLUTION/24) * 60) / (float)(acc / EXT_INTERVAL_BUFFER_SIZE));
// derivated one time calc value = ( freq_resolution / 24 ) * 60
tempo = (float)(156250.0 / (acc / EXT_INTERVAL_BUFFER_SIZE));
//tempo = (float)(156250.0 / (acc / EXT_INTERVAL_BUFFER_SIZE));
}
}
return tempo;
@ -350,7 +348,7 @@ void uClockClass::handleExternalClock()
void uClockClass::handleTimerInt()
{
if (counter == 0) {
//if (counter == 0) {
// update internal clock base counter
counter = interval;
@ -400,9 +398,9 @@ void uClockClass::handleTimerInt()
mod6_counter = 0;
}
} else {
counter--;
}
//} else {
// counter--;
//}
}
// elapsed time support
@ -457,21 +455,13 @@ volatile uint32_t _timer = 0;
//
// TIMER INTERRUPT HANDLER
// Clocked at: 62.5kHz/16usec
//
//
#if defined(TEENSYDUINO) && !defined(__AVR_ATmega32U4__)
void uclockISR()
#else
#if defined(AVR_TIMER_0)
ISR(TIMER0_COMPA_vect)
#endif
#if defined(AVR_TIMER_1)
ISR(TIMER1_COMPA_vect)
#endif
#if defined(AVR_TIMER_2)
ISR(TIMER2_COMPA_vect)
#endif
#endif
{
// global timer counter
_timer = millis();

6
src/uClock.h
Unescape View File

@ -35,6 +35,8 @@
namespace umodular { namespace clock {
#define AVR_CLOCK_FREQ 16000000
#define PHASE_FACTOR 16
#define EXT_INTERVAL_BUFFER_SIZE 24
@ -52,6 +54,8 @@ class uClockClass {
private:
void setTimerTempo(float bpm);
void (*onClock96PPQNCallback)(uint32_t * tick);
void (*onClock32PPQNCallback)(uint32_t * tick);
void (*onClock16PPQNCallback)(uint32_t * tick);
@ -83,6 +87,7 @@ class uClockClass {
uint32_t ext_interval_acc;
uint16_t ext_interval_idx;
public:
enum {
@ -153,7 +158,6 @@ class uClockClass {
uint8_t getNumberOfDays(uint32_t time);
uint32_t getNowTimer();
uint32_t getPlayTime();
};
} } // end namespace umodular::clock

Write Preview
Loading…
Cancel
Save