mirror of https://github.com/jeelabs/esp-link.git
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
41 lines
1.3 KiB
41 lines
1.3 KiB
Boards with ESP-Link
|
|
====================
|
|
|
|
This readme provides instructions for PCBs that I've made that are designed for esp-link.
|
|
Some of the instructions may be helpful to others as well.
|
|
|
|
Installing esptool.py
|
|
---------------------
|
|
|
|
On Linux I am using [esptool.py](https://github.com/themadinventor/esptool) to flash the esp8266.
|
|
If you're a little python challenged (like I am) then the following install instructions might help:
|
|
- Install ez_setup with the following two commands:
|
|
`wget https://bootstrap.pypa.io/ez_setup.py`
|
|
`python ez_setup.py`
|
|
I believe this will do something reasonable if you already have it (quite likely).
|
|
- Install esptool.py:
|
|
`git clone https://github.com/themadinventor/esptool.git`
|
|
`python setup.py install`
|
|
`cd ..`
|
|
`esptool.py -h`
|
|
|
|
Flashing esp-link
|
|
-----------------
|
|
|
|
Using esptool.py an esp-link release can be flashed as follows:
|
|
```
|
|
mkdir firmware
|
|
cd firmware
|
|
wget https://github.com/jeelabs/esp-link/releases/download/0.9.3/blank.bin
|
|
wget https://github.com/jeelabs/esp-link/releases/download/0.9.3/boot_v1.3.b3.bin
|
|
wget https://github.com/jeelabs/esp-link/releases/download/0.9.3/user1.bin
|
|
esptool.py write_flash 0x00000 boot_v1.3.b3.bi 0x1000 user1.bin 0x7e000 blank.bin
|
|
```
|
|
(I see that I need to produce a tgz download...)
|
|
|
|
esp-bridge
|
|
----------
|
|
|
|
The esp-bridge
|
|
|
|
|
|
|