wirtz
/
esp-link
mirror of https://github.com/jeelabs/esp-link.git
1
0
Fork 0
Code Issues Releases Wiki Activity

Change reset line high output to no output

Browse Source
pull/482/head
Yukai Li 5 years ago committed by Thorsten von Eicken
parent 09474e6734
commit 75448fdeb9
1 changed files with 5 additions and 5 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 10
      serial/serbridge.c

10
serial/serbridge.c
Unescape View File

@ -143,7 +143,7 @@ telnetUnwrap(serbridgeConnData *conn, uint8_t *inBuf, int len)
break; break;
case DTR_OFF: case DTR_OFF:
if (mcu_reset_pin >= 0) { if (mcu_reset_pin >= 0) {
GPIO_OUTPUT_SET(mcu_reset_pin, 1); GPIO_DIS_OUTPUT(mcu_reset_pin);
os_delay_us(100L); os_delay_us(100L);
} }
break; break;
@ -267,7 +267,7 @@ serbridgeReset()
#endif #endif
GPIO_OUTPUT_SET(mcu_reset_pin, 0); GPIO_OUTPUT_SET(mcu_reset_pin, 0);
os_delay_us(2000L); // esp8266 needs at least 1ms reset pulse, it seems... os_delay_us(2000L); // esp8266 needs at least 1ms reset pulse, it seems...
GPIO_OUTPUT_SET(mcu_reset_pin, 1); GPIO_DIS_OUTPUT(mcu_reset_pin);
} }
#ifdef SERBR_DBG #ifdef SERBR_DBG
else { os_printf("MCU reset: no pin\n"); } else { os_printf("MCU reset: no pin\n"); }
@ -332,7 +332,7 @@ serbridgeRecvCb(void *arg, char *data, unsigned short len)
os_delay_us(100L); os_delay_us(100L);
if (mcu_isp_pin >= 0) GPIO_OUTPUT_SET(mcu_isp_pin, 0); if (mcu_isp_pin >= 0) GPIO_OUTPUT_SET(mcu_isp_pin, 0);
os_delay_us(2000L); os_delay_us(2000L);
if (mcu_reset_pin >= 0) GPIO_OUTPUT_SET(mcu_reset_pin, 1); if (mcu_reset_pin >= 0) GPIO_DIS_OUTPUT(mcu_reset_pin);
//os_delay_us(100L); //os_delay_us(100L);
//if (mcu_isp_pin >= 0) GPIO_OUTPUT_SET(mcu_isp_pin, 1); //if (mcu_isp_pin >= 0) GPIO_OUTPUT_SET(mcu_isp_pin, 1);
os_delay_us(1000L); // wait a millisecond before writing to the UART below os_delay_us(1000L); // wait a millisecond before writing to the UART below
@ -498,7 +498,7 @@ serbridgeDisconCb(void *arg)
os_delay_us(100L); os_delay_us(100L);
GPIO_OUTPUT_SET(mcu_reset_pin, 0); GPIO_OUTPUT_SET(mcu_reset_pin, 0);
os_delay_us(100L); os_delay_us(100L);
GPIO_OUTPUT_SET(mcu_reset_pin, 1); GPIO_DIS_OUTPUT(mcu_reset_pin);
} }
conn->conn = NULL; conn->conn = NULL;
} }
@ -580,7 +580,7 @@ serbridgeInitPins()
// set both pins to 1 before turning them on so we don't cause a reset // set both pins to 1 before turning them on so we don't cause a reset
if (mcu_isp_pin >= 0) GPIO_OUTPUT_SET(mcu_isp_pin, 1); if (mcu_isp_pin >= 0) GPIO_OUTPUT_SET(mcu_isp_pin, 1);
if (mcu_reset_pin >= 0) GPIO_OUTPUT_SET(mcu_reset_pin, 1); if (mcu_reset_pin >= 0) GPIO_DIS_OUTPUT(mcu_reset_pin);
// switch pin mux to make these pins GPIO pins // switch pin mux to make these pins GPIO pins
if (mcu_reset_pin >= 0) makeGpio(mcu_reset_pin); if (mcu_reset_pin >= 0) makeGpio(mcu_reset_pin);
if (mcu_isp_pin >= 0) makeGpio(mcu_isp_pin); if (mcu_isp_pin >= 0) makeGpio(mcu_isp_pin);

Write Preview
Loading…
Cancel
Save