fix MQTT start-up

esp-link/mqtt_client.c

@@ -5,7 +5,7 @@
 #include "mqtt.h"
 
 #ifdef MQTTCLIENT_DBG
-#define DBG(format, ...) do { os_printf(format, ## __VA_ARGS__) } while(0)
+#define DBG(format, ...) do { os_printf(format, ## __VA_ARGS__); } while(0)
 #else
 #define DBG(format, ...) do { } while(0)
 #endif
@@ -66,7 +66,7 @@ void ICACHE_FLASH_ATTR
 wifiStateChangeCb(uint8_t status)
 {
   if (flashConfig.mqtt_enable) {
-    if (status == wifiGotIP && mqttClient.connState != TCP_CONNECTING) {
+    if (status == wifiGotIP && mqttClient.connState < TCP_CONNECTING) {
       MQTT_Connect(&mqttClient);
     }
     else if (status == wifiIsDisconnected && mqttClient.connState == TCP_CONNECTING) {
@@ -87,8 +87,9 @@ mqtt_client_init()
   MQTT_OnPublished(&mqttClient, mqttPublishedCb);
   MQTT_OnData(&mqttClient, mqttDataCb);
 
-  if (flashConfig.mqtt_enable && strlen(flashConfig.mqtt_host) > 0)
+  // Don't connect now, wait for a wifi status change callback
-    MQTT_Connect(&mqttClient);
+  //if (flashConfig.mqtt_enable && strlen(flashConfig.mqtt_host) > 0)
+  //  MQTT_Connect(&mqttClient);
 
   wifiAddStateChangeCb(wifiStateChangeCb);
 }

httpd/httpd.c

@@ -17,6 +17,7 @@ Esp8266 http server - core routines
 #include <esp8266.h>
 #include "httpd.h"
 
+//#define HTTPD_DBG
 #ifdef HTTPD_DBG
 #define DBG(format, ...) do { os_printf(format, ## __VA_ARGS__); } while(0)
 #else

include/user_config.h

@@ -22,6 +22,7 @@
 #define HTTPD_DBG
 #define MQTT_DBG
 #define MQTTCMD_DBG
+#define MQTTCLIENT_DBG
 #undef PKTBUF_DBG
 #define REST_DBG
 #define RESTCMD_DBG
@@ -32,7 +33,7 @@
 #define MDNS_DBG
 #define OPTIBOOT_DBG
 #undef SYSLOG_DBG
-#undef CGISERVICES_DBG
+#define CGISERVICES_DBG
 
 // If defined, the default hostname for DHCP will include the chip ID to make it unique
 #undef CHIP_IN_HOSTNAME

mqtt/mqtt_cmd.c

@@ -184,63 +184,6 @@ MQTTCMD_Setup(CmdPacket *cmd) {
 
   if (cmdGetArgc(&req) != 4) return;
 
-#if 0
-// This section is commented-out because we're using the same client as esp-link is using itself,
-// i.e. the one set-up in the Web UI. This code was here when we used a separate client for the
-// attached uC, which just makes life more complicated...
-
-  if (cmdGetArgc(&req) != 9)
-    return 0;
-
-  // create mqtt client
-  uint8_t clientLen = sizeof(MQTT_Client);
-  MQTT_Client* client = (MQTT_Client*)os_zalloc(clientLen);
-  if (client == NULL) return 0;
-  os_memset(client, 0, clientLen);
-
-  uint16_t len;
-  uint8_t *client_id, *user_data, *pass_data;
-  uint32_t keepalive, clean_session;
-
-  // get client id
-  len = cmdArgLen(&req);
-  if (len > 32) return 0; // safety check
-  client_id = (uint8_t*)os_zalloc(len + 1);
-  cmdPopArg(&req, client_id, len);
-  client_id[len] = 0;
-
-  // get username
-  len = cmdArgLen(&req);
-  if (len > 32) return 0; // safety check
-  user_data = (uint8_t*)os_zalloc(len + 1);
-  cmdPopArg(&req, user_data, len);
-  user_data[len] = 0;
-
-  // get password
-  len = cmdArgLen(&req);
-  if (len > 32) return 0; // safety check
-  pass_data = (uint8_t*)os_zalloc(len + 1);
-  cmdPopArg(&req, pass_data, len);
-  pass_data[len] = 0;
-
-  // get keepalive
-  cmdPopArg(&req, (uint8_t*)&keepalive, 4);
-
-  // get clean session
-  cmdPopArg(&req, (uint8_t*)&clean_session, 4);
-#ifdef MQTTCMD_DBG
-  DBG("MQTT: MQTTCMD_Setup clientid=%s, user=%s, pw=%s, keepalive=%ld, clean_session=%ld\n", client_id, user_data, pass_data, keepalive, clean_session);
-#endif
-
-  // init client
-  // TODO: why malloc these all here, pass to MQTT_InitClient to be malloc'd again?
-  MQTT_InitClient(client, (char*)client_id, (char*)user_data, (char*)pass_data, keepalive, clean_session);
-
-  os_free(client_id);
-  os_free(user_data);
-  os_free(pass_data);
-#endif
-
   // create callback
   MqttCmdCb* callback = (MqttCmdCb*)os_zalloc(sizeof(MqttCmdCb));
   cmdPopArg(&req, &callback->connectedCb, 4);
@@ -263,85 +206,3 @@ MQTTCMD_Setup(CmdPacket *cmd) {
     cmdMqttDisconnectedCb(client);
   }
 }
-
-#if 0
-// This section is commented-out because we're using the same client as esp-link is using itself,
-// i.e. the one set-up in the Web UI. This code was here when we used a separate client for the
-// attached uC, which just makes life more complicated...
-
-uint32_t ICACHE_FLASH_ATTR
-MQTTCMD_Connect(CmdPacket *cmd) {
-  CmdRequest req;
-  cmdRequest(&req, cmd);
-
-#ifdef MQTT_1_CLIENT
-
-  if (mqttClient.connState == MQTT_CONNECTED && mqttClient.cmdConnectedCb) {
-    mqttClient.cmdConnectedCb((uint32_t*)&mqttClient);
-  }
-  else if (mqttClient.connState == MQTT_DISCONNECTED && mqttClient.cmdDisconnectedCb) {
-    mqttClient.cmdDisconnectedCb((uint32_t*)&mqttClient);
-  }
-
-  return 1;
-
-#else
-  if (cmdGetArgc(&req) != 4)
-    return 0;
-
-  // get mqtt client
-  uint32_t client_ptr;
-  cmdPopArg(&req, (uint8_t*)&client_ptr, 4);
-  MQTT_Client* client = (MQTT_Client*)client_ptr;
-  DBG("MQTT: MQTTCMD_Connect client ptr=%p\n", (void*)client_ptr);
-
-  uint16_t len;
-
-  // get host
-  if (client->host)
-  os_free(client->host);
-  len = cmdArgLen(&req);
-  if (len > 128) return 0; // safety check
-  client->host = (char*)os_zalloc(len + 1);
-  cmdPopArg(&req, client->host, len);
-  client->host[len] = 0;
-
-  // get port
-  cmdPopArg(&req, (uint8_t*)&client->port, 4);
-
-  // get security
-  cmdPopArg(&req, (uint8_t*)&client->security, 4);
-  DBG("MQTT: MQTTCMD_Connect host=%s, port=%d, security=%d\n",
-    client->host,
-    client->port,
-    client->security);
-
-  MQTT_Connect(client);
-  return 1;
-#endif
-}
-
-uint32_t ICACHE_FLASH_ATTR
-MQTTCMD_Disconnect(CmdPacket *cmd) {
-  CmdRequest req;
-  cmdRequest(&req, cmd);
-
-#ifdef MQTT_1_CLIENT
-  return 1;
-
-#else
-  if (cmdGetArgc(&req) != 1)
-    return 0;
-
-  // get mqtt client
-  uint32_t client_ptr;
-  cmdPopArg(&req, (uint8_t*)&client_ptr, 4);
-  MQTT_Client* client = (MQTT_Client*)client_ptr;
-  DBG("MQTT: MQTTCMD_Disconnect client ptr=%p\n", (void*)client_ptr);
-
-  // disconnect
-  MQTT_Disconnect(client);
-  return 1;
-#endif
-}
-#endif