esp-link/Makefile

# --------------- esphttpd config options ---------------

# If GZIP_COMPRESSION is set to "yes" then the static css, js, and html files will be compressed with gzip before added to the espfs image
# and will be served with gzip Content-Encoding header.
# This could speed up the downloading of these files, but might break compatibility with older web browsers not supporting gzip encoding
# because Accept-Encoding is simply ignored. Enable this option if you have large static files to serve (for e.g. JQuery, Twitter bootstrap)
# By default only js, css and html files are compressed.
# If you have text based static files with different extensions what you want to serve compressed then you will need to add the extension to the following places:
# - Add the extension to this Makefile at the webpages.espfs target to the find command
# - Add the extension to the gzippedFileTypes array in the user/httpd.c file
#
# Adding JPG or PNG files (and any other compressed formats) is not recommended, because GZIP compression does not works effectively on compressed files.

#Static gzipping is disabled by default.
GZIP_COMPRESSION ?= no

# If COMPRESS_W_YUI is set to "yes" then the static css and js files will be compressed with yui-compressor
# This option works only when GZIP_COMPRESSION is set to "yes"
# http://yui.github.io/yuicompressor/
#Disabled by default.
COMPRESS_W_YUI ?= no
YUI-COMPRESSOR ?= /usr/bin/yui-compressor

#If USE_HEATSHRINK is set to "yes" then the espfs files will be compressed with Heatshrink and decompressed
#on the fly while reading the file. Because the decompression is done in the esp8266, it does not require
#any support in the browser.
USE_HEATSHRINK ?= yes

# -------------- End of esphttpd config options -------------


# Output directors to store intermediate compiled files
# relative to the project directory
BUILD_BASE	= build
FW_BASE		= firmware

# Base directory for the compiler. Needs a / at the end;
XTENSA_TOOLS_ROOT ?= $(abspath ../esp-open-sdk/xtensa-lx106-elf/bin)/

# Base directory of the ESP8266 SDK package, absolute
SDK_BASE	?= $(abspath ../esp_iot_sdk_v1.0.1)

#Esptool.py path and port
ESPTOOL		?= esptool.py
ESPPORT		?= /dev/ttyUSB0
#ESPDELAY indicates seconds to wait between flashing the two binary images
ESPDELAY	?= 3
ESPBAUD		?= 460800

# name for the target project
TARGET		= httpd

# espressif tool to concatenate sections for OTA upload using bootloader v1.2+
APPGEN_TOOL	?= gen_appbin.py
ESP_SPI_SIZE				?= 0  # 0->512KB
ESP_FLASH_MODE 			?= 0  # 0->QIO
ESP_FLASH_FREQ_DIV	?= 0  # 0->40Mhz
ESP_FLASH_MAX				?= 241664 # max bin file for 512KB flash: 236KB
ESP_HOSTNAME        ?= esp8266



# which modules (subdirectories) of the project to include in compiling
#MODULES		= driver user lwip/api lwip/app lwip/core lwip/core/ipv4 lwip/netif
MODULES		= espfs httpd user serial
EXTRA_INCDIR	= include . lib/heatshrink/

# libraries used in this project, mainly provided by the SDK
LIBS		= c gcc hal phy pp net80211 wpa main lwip



# compiler flags using during compilation of source files
CFLAGS		= -Os -ggdb -std=c99 -Werror -Wpointer-arith -Wundef -Wall -Wl,-EL -fno-inline-functions \
		-nostdlib -mlongcalls -mtext-section-literals  -D__ets__ -DICACHE_FLASH -D_STDINT_H \
		-Wno-address -DFIRMWARE_SIZE=$(ESP_FLASH_MAX)

# linker flags used to generate the main object file
LDFLAGS		= -nostdlib -Wl,--no-check-sections -u call_user_start -Wl,-static

# linker script used for the above linker step
LD_SCRIPT 	:= build/eagle.esphttpd.v6.ld
LD_SCRIPT1	:= build/eagle.esphttpd1.v6.ld
LD_SCRIPT2	:= build/eagle.esphttpd2.v6.ld

# various paths from the SDK used in this project
SDK_LIBDIR		= lib
SDK_LDDIR			= ld
SDK_INCDIR		= include include/json
SDK_TOOLSDIR	= tools

# select which tools to use as compiler, librarian and linker
CC		:= $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-gcc
AR		:= $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-ar
LD		:= $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-gcc
OBJCP := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-objcopy
OBJDP := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-objdump


####
#### no user configurable options below here
####
SRC_DIR		:= $(MODULES)
BUILD_DIR	:= $(addprefix $(BUILD_BASE)/,$(MODULES))

SDK_LIBDIR	:= $(addprefix $(SDK_BASE)/,$(SDK_LIBDIR))
SDK_LDDIR 	:= $(addprefix $(SDK_BASE)/,$(SDK_LDDIR))
SDK_INCDIR	:= $(addprefix -I$(SDK_BASE)/,$(SDK_INCDIR))
SDK_TOOLS		:= $(addprefix $(SDK_BASE)/,$(SDK_TOOLSDIR))
APPGEN_TOOL	:= $(addprefix $(SDK_TOOLS)/,$(APPGEN_TOOL))

SRC		:= $(foreach sdir,$(SRC_DIR),$(wildcard $(sdir)/*.c))
OBJ		:= $(patsubst %.c,$(BUILD_BASE)/%.o,$(SRC)) $(BUILD_BASE)/espfs_img.o
LIBS		:= $(addprefix -l,$(LIBS))
APP_AR		:= $(addprefix $(BUILD_BASE)/,$(TARGET)_app.a)
TARGET_OUT	:= $(addprefix $(BUILD_BASE)/,$(TARGET).out)
USER1_OUT 	:= $(addprefix $(BUILD_BASE)/,$(TARGET).user1.out)
USER2_OUT 	:= $(addprefix $(BUILD_BASE)/,$(TARGET).user2.out)

INCDIR	:= $(addprefix -I,$(SRC_DIR))
EXTRA_INCDIR	:= $(addprefix -I,$(EXTRA_INCDIR))
MODULE_INCDIR	:= $(addsuffix /include,$(INCDIR))

V ?= $(VERBOSE)
ifeq ("$(V)","1")
Q :=
vecho := @true
else
Q := @
vecho := @echo
endif

ifeq ("$(GZIP_COMPRESSION)","yes")
CFLAGS		+= -DGZIP_COMPRESSION
endif

ifeq ("$(USE_HEATSHRINK)","yes")
CFLAGS		+= -DESPFS_HEATSHRINK
endif

vpath %.c $(SRC_DIR)

define compile-objects
$1/%.o: %.c
	$(vecho) "CC $$<"
	$(Q) $(CC) $(INCDIR) $(MODULE_INCDIR) $(EXTRA_INCDIR) $(SDK_INCDIR) $(CFLAGS)  -c $$< -o $$@
endef

.PHONY: all checkdirs clean webpages.espfs

all: checkdirs $(FW_BASE) firmware/user1.bin firmware/user2.bin

$(TARGET_OUT): $(APP_AR) $(LD_SCRIPT)
	$(vecho) "LD $@"
	$(Q) $(LD) -L$(SDK_LIBDIR) -T$(LD_SCRIPT) $(LDFLAGS) -Wl,--start-group $(LIBS) $(APP_AR) -Wl,--end-group -o $@
	$(OBJDP) -x $(TARGET_OUT) | egrep '(espfs_img)'

$(USER1_OUT): $(APP_AR) $(LD_SCRIPT1)
	$(vecho) "LD $@"
	$(Q) $(LD) -L$(SDK_LIBDIR) -T$(LD_SCRIPT1) $(LDFLAGS) -Wl,--start-group $(LIBS) $(APP_AR) -Wl,--end-group -o $@
#	$(Q) $(OBJDP) -x $(TARGET_OUT) | egrep espfs_img

$(USER2_OUT): $(APP_AR) $(LD_SCRIPT2)
	$(vecho) "LD $@"
	$(Q) $(LD) -L$(SDK_LIBDIR) -T$(LD_SCRIPT2) $(LDFLAGS) -Wl,--start-group $(LIBS) $(APP_AR) -Wl,--end-group -o $@
#	$(Q) $(OBJDP) -x $(TARGET_OUT) | egrep espfs_img

$(FW_BASE): $(TARGET_OUT)
	$(vecho) "FW $@"
	$(Q) mkdir -p $@
	$(Q) $(ESPTOOL) elf2image $(TARGET_OUT) --output $@/

firmware/user1.bin: $(USER1_OUT)
	$(Q) $(OBJCP) --only-section .text -O binary $(USER1_OUT) eagle.app.v6.text.bin
	$(Q) $(OBJCP) --only-section .data -O binary $(USER1_OUT) eagle.app.v6.data.bin
	$(Q) $(OBJCP) --only-section .rodata -O binary $(USER1_OUT) eagle.app.v6.rodata.bin
	$(Q) $(OBJCP) --only-section .irom0.text -O binary $(USER1_OUT) eagle.app.v6.irom0text.bin
	ls -ls eagle*bin
	$(Q) COMPILE=gcc PATH=$(XTENSA_TOOLS_ROOT):$(PATH) python $(APPGEN_TOOL) $(USER1_OUT) 2 $(ESP_FLASH_MODE) $(ESP_FLASH_FREQ_DIV) $(ESP_SPI_SIZE)
	$(Q) rm -f eagle.app.v6.*.bin
	$(Q) mv eagle.app.flash.bin $@
	@echo "** user1.bin uses $$(stat -c '%s' $@) bytes of" $(ESP_FLASH_MAX) "available"
	$(Q) if [ $$(stat -c '%s' $@) -gt $$(( $(ESP_FLASH_MAX) )) ]; then echo "$@ too big!"; false; fi

firmware/user2.bin: $(USER2_OUT)
	$(Q) $(OBJCP) --only-section .text -O binary $(USER2_OUT) eagle.app.v6.text.bin
	$(Q) $(OBJCP) --only-section .data -O binary $(USER2_OUT) eagle.app.v6.data.bin
	$(Q) $(OBJCP) --only-section .rodata -O binary $(USER2_OUT) eagle.app.v6.rodata.bin
	$(Q) $(OBJCP) --only-section .irom0.text -O binary $(USER2_OUT) eagle.app.v6.irom0text.bin
	$(Q) COMPILE=gcc PATH=$(XTENSA_TOOLS_ROOT):$(PATH) python $(APPGEN_TOOL) $(USER2_OUT) 2 $(ESP_FLASH_MODE) $(ESP_FLASH_FREQ_DIV) $(ESP_SPI_SIZE)
	$(Q) rm -f eagle.app.v6.*.bin
	$(Q) mv eagle.app.flash.bin $@
	$(Q) if [ $$(stat -c '%s' $@) -gt $$(( $(ESP_FLASH_MAX) )) ]; then echo "$@ too big!"; false; fi


$(APP_AR): $(OBJ)
	$(vecho) "AR $@"
	$(Q) $(AR) cru $@ $^

checkdirs: $(BUILD_DIR)

$(BUILD_DIR):
	$(Q) mkdir -p $@

wiflash: all
	./wiflash $(ESP_HOSTNAME) firmware/user1.bin firmware/user2.bin

flash: $(TARGET_OUT) $(FW_BASE)
	$(Q) $(ESPTOOL) --port $(ESPPORT) --baud $(ESPBAUD) write_flash 0x00000 $(FW_BASE)/0x00000.bin 0x40000 $(FW_BASE)/0x40000.bin

$(BUILD_BASE)/espfs_img.o: html/ html/wifi/ espfs/mkespfsimage/mkespfsimage
ifeq ("$(COMPRESS_W_YUI)","yes")
	$(Q) rm -rf html_compressed;
	$(Q) cp -r html html_compressed;
	$(Q) echo "Compression assets with yui-compressor. This may take a while..."
	$(Q) for file in `find html_compressed -type f -name "*.js"`; do $(YUI-COMPRESSOR) --type js $$file -o $$file; done
	$(Q) for file in `find html_compressed -type f -name "*.css"`; do $(YUI-COMPRESSOR) --type css $$file -o $$file; done
	$(Q) awk "BEGIN {printf \"YUI compression ratio was: %.2f%%\\n\", (`du -b -s html_compressed/ | sed 's/\([0-9]*\).*/\1/'`/`du -b -s html/ | sed 's/\([0-9]*\).*/\1/'`)*100}"
  # mkespfsimage will compress html, css and js files with gzip by default if enabled
  # override with -g cmdline parameter
	$(Q) cd html_compressed; find  | ../espfs/mkespfsimage/mkespfsimage > ../build/espfs.img; cd ..;
else
	$(Q) cd html; find . \! -name \*- | ../espfs/mkespfsimage/mkespfsimage > ../build/espfs.img; cd ..
endif
	$(Q) cd build; $(OBJCP) -I binary -O elf32-xtensa-le -B xtensa --rename-section .data=.espfs \
			espfs.img espfs_img.o; cd ..

# edit the loader script to add the espfs section to the end of irom with a 4 byte alignment.
# we also adjust the sizes of the segments 'cause we need more irom0
# in the end the only thing that matters wrt size is that the whole shebang fits into the
# 236KB available (in a 512KB flash)
build/eagle.esphttpd.v6.ld: $(SDK_LDDIR)/eagle.app.v6.ld
	$(Q) sed -e '/\.irom\.text/{' -e 'a . = ALIGN (4);' -e 'a *(.espfs)' -e '}'  \
	    $(SDK_LDDIR)/eagle.app.v6.ld >$@
build/eagle.esphttpd1.v6.ld: $(SDK_LDDIR)/eagle.app.v6.new.512.app1.ld
	$(Q) sed -e '/\.irom\.text/{' -e 'a . = ALIGN (4);' -e 'a *(.espfs)' -e '}'  \
			-e '/^  irom0_0_seg/ s/2B000/38000/' \
	    $(SDK_LDDIR)/eagle.app.v6.new.512.app1.ld >$@
build/eagle.esphttpd2.v6.ld: $(SDK_LDDIR)/eagle.app.v6.new.512.app2.ld
	$(Q) sed -e '/\.irom\.text/{' -e 'a . = ALIGN (4);' -e 'a *(.espfs)' -e '}'  \
			-e '/^  irom0_0_seg/ s/2B000/38000/' \
	    $(SDK_LDDIR)/eagle.app.v6.new.512.app2.ld >$@

blankflash:
	$(Q) $(ESPTOOL) --port $(ESPPORT) --baud $(ESPBAUD) write_flash 0x7E000 $(SDK_BASE)/bin/blank.bin

espfs/mkespfsimage/mkespfsimage: espfs/mkespfsimage/
	$(Q) $(MAKE) -C espfs/mkespfsimage USE_HEATSHRINK="$(USE_HEATSHRINK)" GZIP_COMPRESSION="$(GZIP_COMPRESSION)"

clean:
	$(Q) rm -f $(APP_AR)
	$(Q) rm -f $(TARGET_OUT)
	$(Q) find $(BUILD_BASE) -type f | xargs rm -f
	$(Q) make -C espfs/mkespfsimage/ clean
	$(Q) rm -rf $(FW_BASE)
	$(Q) rm -f webpages.espfs
ifeq ("$(COMPRESS_W_YUI)","yes")
	$(Q) rm -rf html_compressed
endif

$(foreach bdir,$(BUILD_DIR),$(eval $(call compile-objects,$(bdir))))