Added README.md from upstream.

Added MIDI channel support.

OSC2Midi.cpp

@@ -3,8 +3,8 @@
 #include <stdlib.h>
 
 /*
- * TODO: this will return rather unpredictable numbers when 
+   TODO: this will return rather unpredictable numbers when
- * given strings with numbers > 255.
+   given strings with numbers > 255.
 */
 uint8_t getCC(const char *str, int index)
 {
@@ -37,6 +37,11 @@ uint8_t getCC(const char *str, int index)
 }
 
 uint8_t getCC(const char *str)
+{
+  return getCC(str, 1);
+}
+
+uint8_t getMIDIChannel(const char *str)
 {
   return getCC(str, -1);
 }

OSC2Midi.h

@@ -5,5 +5,6 @@
 
 uint8_t getCC(const char *str, int index);
 uint8_t getCC(const char *str);
+uint8_t getMIDIChannel(const char *str);
 
 #endif

OSC2MidiGateway.ino

@@ -48,8 +48,10 @@ void setup() {
 void OSCToMidiCC(OSCMessage &msg, int offset) {
   char address[100] = { 0 };
   uint8_t cc, value;
+  uint8_t midichannel;
 
   msg.getAddress(address, offset, sizeof(address));
+  midichannel = getMIDIChannel(address);
 
   if (msg.size() == 1 && msg.isFloat(0)) {
     // Single or multi control with sending one value
@@ -57,20 +59,20 @@ void OSCToMidiCC(OSCMessage &msg, int offset) {
     value = round(msg.getFloat(0));
     value = value > 127 ? 127 : value;
     DEBUG_MSG("MSG: %s\tCC: %u\tValue: %u\n", address, cc, value);
-    MIDI.sendControlChange(cc, value, 1);
+    MIDI.sendControlChange(cc, value, midichannel);
   } else if (msg.size() == 2 && msg.isFloat(0) && msg.isFloat(1)) {
     // XY pad, two values
-    cc = getCC(address, 0);
+    cc = getCC(address, 1);
     value = round(msg.getFloat(0));
     value = value > 127 ? 127 : value;
     DEBUG_MSG("MSG: %s\tCC: %u\tValue: %u\n", address, cc, value);
-    MIDI.sendControlChange(cc, value, 1);
+    MIDI.sendControlChange(cc, value, midichannel);
 
-    cc = getCC(address, 1);
+    cc = getCC(address, 2);
     value = round(msg.getFloat(1));
     value = value > 127 ? 127 : value;
     DEBUG_MSG("MSG: %s\tCC: %u\tValue: %u\n", address, cc, value);
-    MIDI.sendControlChange(cc, value, 1);
+    MIDI.sendControlChange(cc, value, midichannel);
   } else {
     DEBUG_MSG("Cannot handle: %s\n", address);
   }
@@ -78,7 +80,7 @@ void OSCToMidiCC(OSCMessage &msg, int offset) {
 
 void MidiCCToOSC(uint8_t channel, uint8_t number, uint8_t value) {
   char buffer[1024];
-  snprintf(buffer, sizeof(buffer), "/midi/cc/%u", number);
+  snprintf(buffer, sizeof(buffer), "/midi/cc/%u/%u", channel, number);
 
   OSCMessage msg = OSCMessage(buffer);
   msg.add(value * 1.0);

README.md

@@ -1,2 +1,54 @@
 # OSC2MidiGateway
 
+(Fork of https://github.com/tadas-s/OSC2Midi with extensions)
+
+ESP8266 based OSC <-> Midi wireless bridge.
+
+It is mostly meant to be used with [TouchOSC][1] but it will work with
+any [OSC message source][2].
+
+## Library dependencies
+
+Project uses:
+  * https://github.com/FortySevenEffects/arduino_midi_library/
+  * https://github.com/CNMAT/OSC
+
+## Hardware
+
+Based on a generic ESP8266-01 board using both GPIO pins as MIDI-I/O.
+
+## OSC message formats
+
+All messages are expected to have payload of 1 or 2 floats with range
+from 0 to 127.
+
+### /midi/cc/channel/{cc} + 1 float
+
+Will send control change message for `{cc}` number.
+
+### /midi/cc/channel/{ccA}/{ccB}/.../{index} + 1 float
+
+Will send control change message for CC specified by `{index}`. For
+example:
+
+  * /midi/cc/1/10/12/15/1 -> CC to 10 on channel 1
+  * /midi/cc/1/10/12/15/3 -> CC to 15 on channel 1
+
+This is meant to be used with TouchOSC groups of faders. For example,
+my [MicroKORG][6] preset includes a fader group of 4 to control
+amp ADSR: `/midi/cc/1/73/75/70/72`
+
+### /midi/cc/channel/{ccA}/{ccB} + 2 floats
+
+This sends two control change messages to `{ccA}` and `{ccB}`. This is
+meant to be used with TouchOSC XY pads.
+
+[1]: http://hexler.net/software/touchosc
+[2]: https://en.wikipedia.org/wiki/Open_Sound_Control
+[3]: https://www.arduino.cc/en/Tutorial/Midi
+[4]: http://libremusicproduction.com/tutorials/arduino-and-midi-in
+[5]: https://www.arduino.cc/en/Reference/SoftwareSerial
+[6]: http://www.korg.com/us/products/synthesizers/microkorg/
+[7]: https://www.microchip.com/wwwproducts/en/en027785
+[8]: https://github.com/tadas-s/esp8266-autoreset
+