First running version!

OSC2Midi.cpp

@@ -6,7 +6,7 @@
    TODO: this will return rather unpredictable numbers when
    given strings with numbers > 255.
 */
-uint8_t getCC(const char *str, int index)
+uint8_t getVar(const char *str, int index)
 {
   const char *offset = str;
 
@@ -38,10 +38,10 @@ uint8_t getCC(const char *str, int index)
 
 uint8_t getCC(const char *str)
 {
-  return getCC(str, 1);
+  return getVar(str, 1);
 }
 
 uint8_t getMIDIChannel(const char *str)
 {
-  return getCC(str, -1);
+  return getVar(str, 0);
 }

OSC2Midi.h

@@ -3,7 +3,7 @@
 
 #include <cstdint>
 
-uint8_t getCC(const char *str, int index);
+uint8_t getVar(const char *str, int index);
 uint8_t getCC(const char *str);
 uint8_t getMIDIChannel(const char *str);
 

OSC2MidiGateway.ino

@@ -1,6 +1,9 @@
+#define DEBUG 1
+
 #include "debug.h"
 #include <Arduino.h>
-#include <ESP8266WiFi.h>
+//#include <ESP8266WiFi.h>
+#include <WiFiManager.h>
 #include <WiFiUdp.h>
 #include <OSCMessage.h>
 #include <OSCBundle.h>
@@ -21,96 +24,124 @@ IPAddress clientIP;
   IPAddress gateway(192,168,4,1);
   IPAddress subnet(255,255,255,0);*/
 
-MIDI_CREATE_INSTANCE(HardwareSerial, Serial, MIDI);
+/*
+   UART    RX IO   TX IO   CTS   RTS
+   UART0   GPIO3   GPIO1   N/A   N/A
+   UART1   GPIO9   GPIO10  GPIO6   GPIO11
+   UART2   GPIO16  GPIO17  GPIO8   GPIO7
+*/
+
+MIDI_CREATE_INSTANCE(HardwareSerial, Serial2, MIDI); // Pins on ESP32: RX: 6, TX: 7
+//MIDI_CREATE_INSTANCE(HardwareSerial, Serial1, MIDI2); // Pins on ESP32: RX: ?, TX: ?
 
-void setup() {
+void setup()
-  // Midi via UART0
+{
-  Serial.begin(31250);
+  Serial2.begin(31250);
-  Serial.swap();
 
-#ifdef DEBUG
+  Serial.begin(115200);
-  // Debug via UART1 TX only
+  Serial.setDebugOutput(true);
-  Serial1.begin(115200, SERIAL_8N1, SERIAL_TX_ONLY, 2);
-  Serial1.setDebugOutput(true);
-#endif
 
   DEBUG_MSG("\nHello OSC2Midi!\n");
 
-  WiFi.softAP("OSC2Midi", "Midi2OSCGateway");
+  WiFi.softAP("OSC2Midi", "1357924680");
 
   DEBUG_MSG("\nAP IP address: %s\n", WiFi.softAPIP().toString().c_str());
 
   udp.begin(8000);
 
+  MIDI.begin(MIDI_CHANNEL_OMNI);
   MIDI.setHandleControlChange(MidiCCToOSC);
+  MIDI.turnThruOff();
 }
 
-void OSCToMidiCC(OSCMessage &msg, int offset) {
+void OSCToMidiCC(OSCMessage &msg, int offset)
+{
   char address[100] = { 0 };
   uint8_t cc, value;
   uint8_t midichannel;
 
   msg.getAddress(address, offset, sizeof(address));
   midichannel = getMIDIChannel(address);
+  //midichannel--;
 
-  if (msg.size() == 1 && msg.isFloat(0)) {
+  if (msg.size() == 1 && msg.isFloat(0))
+  {
     // Single or multi control with sending one value
     cc = getCC(address);
     value = round(msg.getFloat(0));
     value = value > 127 ? 127 : value;
-    DEBUG_MSG("MSG: %s\tCC: %u\tValue: %u\n", address, cc, value);
+    DEBUG_MSG("MSG: %s\tChannel: %u\t\tCC: %u\tValue: %u\n", address, midichannel, cc, value);
     MIDI.sendControlChange(cc, value, midichannel);
-  } else if (msg.size() == 2 && msg.isFloat(0) && msg.isFloat(1)) {
+  }
+  else if (msg.size() == 2 && msg.isFloat(0) && msg.isFloat(1))
+  {
     // XY pad, two values
-    cc = getCC(address, 1);
+    cc = getVar(address, 1);
     value = round(msg.getFloat(0));
     value = value > 127 ? 127 : value;
-    DEBUG_MSG("MSG: %s\tCC: %u\tValue: %u\n", address, cc, value);
+    DEBUG_MSG("MSG: %s\tChannel: %u\t\tCC: %u\tValue: %u\n", address, midichannel, cc, value);
     MIDI.sendControlChange(cc, value, midichannel);
-
+    cc = getVar(address, 2);
-    cc = getCC(address, 2);
     value = round(msg.getFloat(1));
     value = value > 127 ? 127 : value;
-    DEBUG_MSG("MSG: %s\tCC: %u\tValue: %u\n", address, cc, value);
+    DEBUG_MSG("MSG: %s\tChannel: %u\t\tCC: %u\tValue: %u\n", address, midichannel, cc, value);
     MIDI.sendControlChange(cc, value, midichannel);
-  } else {
+  }
+  else
+  {
     DEBUG_MSG("Cannot handle: %s\n", address);
   }
 }
 
-void MidiCCToOSC(uint8_t channel, uint8_t number, uint8_t value) {
+void MidiCCToOSC(uint8_t channel, uint8_t number, uint8_t val)
+{
   char buffer[1024];
+
   snprintf(buffer, sizeof(buffer), "/midi/cc/%u/%u", channel, number);
 
-  OSCMessage msg = OSCMessage(buffer);
+  DEBUG_MSG("MidiCCToOsc: %s %f\n", buffer, val * 1.0);
-  msg.add(value * 1.0);
 
-  DEBUG_MSG("MidiCCToOsc: %s %f", buffer, value * 1.0);
+  if (clientIP)
+  {
+    OSCMessage msg = OSCMessage(buffer);
+    msg.add(val);
 
-  udp.beginPacket(clientIP, 8001);
+    udp.beginPacket(clientIP, 9000);
-  msg.send(udp);
+    msg.send(udp);
-  udp.endPacket();
+    udp.endPacket();
+  }
 }
 
-void loop() {
+void loop()
+{
   OSCMessage msg;
   uint8_t buffer[1024];
+  uint16_t outPort;
 
   // Check if there are any OSC packets to handle
   size_t size = udp.parsePacket();
-  if (size > 0 && size <= 1024) {
+
+  if (size > 0 && size <= 1024)
+  {
     udp.read(buffer, size);
     msg.fill(buffer, size);
 
-    if (!msg.hasError()) {
+    if (!msg.hasError())
+    {
       DEBUG_OSC_MESSAGE(msg);
       msg.route("/midi/cc", OSCToMidiCC);
-    } else {
+      //msg.route("/midi/sysex", OSCToMidiSYSEX);
+      //msg.route("/midi/note", OSCToMidiNote);
+    }
+    else
+    {
       DEBUG_MSG("Error parsing OSC message: %d\n", msg.getError());
     }
 
     // Keep track of the client IP address for "talking back"
     clientIP = udp.remoteIP();
+
+    udp.flush();
   }
 
   // Check if there are any CC messages from synth itself

debug.h

@@ -3,19 +3,19 @@
 
 #ifdef DEBUG
 
-#define DEBUG_ESP_PORT Serial1
+#define DEBUG_ESP_PORT Serial
-#define DEBUG_MSG(...) Serial1.printf( __VA_ARGS__ )
+#define DEBUG_MSG(...) Serial.printf( __VA_ARGS__ )
 
 #define DEBUG_OSC_MESSAGE(msg) \
   do { \
     char address[100]; \
     msg.getAddress(address, 0, sizeof(address)); \
-    Serial1.printf("osc message: [%d] %s ", msg.size(), address); \
+    Serial.printf("osc message: [%d] %s ", msg.size(), address); \
     for (int i = 0; i < msg.size(); i++) { \
-      if (msg.isFloat(i)) { Serial1.printf("f:%f\t", msg.getFloat(i)); } \
+      if (msg.isFloat(i)) { Serial.printf("f:%f\t", msg.getFloat(i)); } \
-      if (msg.isInt(i)) { Serial1.printf("i:%d\t", msg.getInt(i)); } \
+      if (msg.isInt(i)) { Serial.printf("i:%d\t", msg.getInt(i)); } \
     } \
-    Serial1.printf("\n"); \
+    Serial.printf("\n"); \
   } while(0);
  
 #else

doc/midi_message_types.txt

@@ -0,0 +1,90 @@
+MIDI message types
+
+(hex)
+8 = note_off
+9 = note_on
+A = aftertouch (ie, key pressure)
+B = controller_change
+C = program_change
+D = channel_pressure
+E = pitch_wheel
+
+
+** additions **
+sysex
+start
+stop
+continue
+mode
+file
+
+control_change messages
+
+(dec)
+0   bank_select (coarse)
+1   modulation_wheel (coarse)
+2   breath_controller (coarse)
+4   foot_pedal (coarse)
+5   portamento Time (coarse)
+6   data_entry (coarse)
+7   volume (coarse)
+8   balance (coarse)
+10  pan position (coarse)
+11  expression (coarse)
+12  effect_control_1 (coarse)
+13  effect_control_2 (coarse)
+16  general_purpose_slider_1
+17  general_purpose_slider_2
+18  general_purpose_slider_3
+19  general_purpose_slider_4
+32  bank_select (fine)
+33  modulation_wheel (fine)
+34  breath_controller (fine)
+36  foot_pedal (fine)
+37  Portamento Time (fine)
+38  Data Entry (fine)
+39  Volume (fine)
+40  Balance (fine)
+42  Pan position (fine)
+43  Expression (fine)
+44  Effect Control 1 (fine)
+45  Effect Control 2 (fine)
+64  Hold Pedal (on/off)
+65  Portamento (on/off)
+66  Sustenuto Pedal (on/off)
+67  Soft Pedal (on/off)
+68  Legato Pedal (on/off)
+69  Hold 2 Pedal (on/off)
+70  Sound Variation
+71  Sound Timbre
+72  Sound Release Time
+73  Sound Attack Time
+74  Sound Brightness
+75  Sound Control 6
+76  Sound Control 7
+77  Sound Control 8
+78  Sound Control 9
+79  Sound Control 10
+80  General Purpose Button 1 (on/off)
+81  General Purpose Button 2 (on/off)
+82  General Purpose Button 3 (on/off)
+83  General Purpose Button 4 (on/off)
+91  Effects Level
+92  Tremulo Level
+93  Chorus Level
+94  Celeste Level
+95  Phaser Level
+96  Data Button increment
+97  Data Button decrement
+98  Non-registered Parameter (fine)
+99  Non-registered Parameter (coarse)
+100 Registered Parameter (fine)
+101 Registered Parameter (coarse)
+120 All Sound Off
+121 All Controllers Off
+122 Local Keyboard (on/off)
+123 All Notes Off
+124 Omni Mode Off
+125 Omni Mode On
+126 Mono Operation
+127 Poly Operation