Fixing DEBUG option (renaming to avoid conflict with LiquidMenu).

Small fixes.

MicroMDAEPiano.ino

@@ -21,14 +21,12 @@
    Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA
 */
 
-#include "config.h"
 #include <Audio.h>
 #include <Wire.h>
 #include <SPI.h>
 #include <MIDI.h>
 #include <EEPROM.h>
 #include "EEPROMAnything.h"
-#include <limits.h>
 #include "mdaEPiano.h"
 #include "effect_modulated_chorus.h"
 #ifdef USE_XFADE_DATA
@@ -38,6 +36,7 @@
 #endif
 #include "UI.hpp"
 #include "midi_devices.hpp"
+#include "config.h"
 
 //*************************************************************************************************
 //* GLOBAL VARIABLES
@@ -213,7 +212,7 @@ void setup()
   Serial.println(F("PT8211 enabled."));
 #endif
 
-#if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
+#if defined (SHOW_DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
   // Initialize processor and memory measurements
   AudioProcessorUsageMaxReset();
   AudioMemoryUsageMaxReset();
@@ -242,10 +241,12 @@ void setup()
   modulator.frequency(1.0);
   modulator.phase(0);
   modulator.offset(0.0);
-  
+
   // internal mixing of original signal(0), reverb(1) and chorus(2)
   mixer_r.gain(0, 1.0);
   mixer_l.gain(0, 1.0);
+  mixer_r.gain(1, 0.5);
+  mixer_l.gain(1, 0.5);
   mixer_r.gain(2, 0.5);
   mixer_l.gain(2, 0.5);
 
@@ -254,7 +255,7 @@ void setup()
 
   Serial.println(F("<setup end>"));
 
-#if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
+#if defined (SHOW_DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
   Serial.println();
   show_cpu_and_mem_usage();
   cpu_mem_millis = 0;
@@ -275,7 +276,7 @@ void loop()
   {
     fill_audio_buffer = 0;
 
-#if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
+#if defined (SHOW_DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
     if (cpu_mem_millis > SHOW_CPU_LOAD_MSEC)
     {
       show_cpu_and_mem_usage();
@@ -474,7 +475,7 @@ bool checkMidiChannel(byte inChannel)
   }
   else if (inChannel != configuration.midi_channel)
   {
-#ifdef DEBUG
+#ifdef SHOW_DEBUG
     Serial.print(F("Ignoring MIDI data on channel "));
     Serial.print(inChannel);
     Serial.print(F("(listening on "));
@@ -492,7 +493,7 @@ void set_master_volume(uint8_t value)
   uint16_t tmp = map(value, ENC_MASTER_VOLUME_MIN, ENC_MASTER_VOLUME_MAX, 0, 0x3ff);
   float tmp2 = mapfloat(configuration.pan, ENC_MASTER_PAN_MIN, ENC_MASTER_PAN_MAX, 0.0, 1.0);
   float tmp3 = (float)(tmp * (tmp + 2)) / (float)(1 << 20);
-#ifdef DEBUG
+#ifdef SHOW_DEBUG
   Serial.print(F("Setting volume: VOL="));
   Serial.print(value, DEC);
   Serial.print(F("["));
@@ -531,7 +532,7 @@ void config_from_eeprom(void)
   EEPROM_readAnything(EEPROM_CONFIGURATIONS + sizeof(config_t) * (sound - 1), tmp_conf);
   checksum = crc32((byte*)&tmp_conf + 4, sizeof(tmp_conf) - 4);
 
-#ifdef DEBUG
+#ifdef SHOW_DEBUG
   Serial.print(F("Reading sound "));
   Serial.print(sound, DEC);
   Serial.print(F(" from 0x"));
@@ -545,17 +546,22 @@ void config_from_eeprom(void)
   if (checksum == tmp_conf.checksum)
   {
     EEPROM_readAnything(EEPROM_CONFIGURATIONS + sizeof(config_t) * (sound - 1), configuration);
+#ifdef SHOW_DEBUG
     Serial.print(F(" - OK"));
+#endif
   }
   else
   {
-#ifdef DEBUG
+#ifdef SHOW_DEBUG
     Serial.println(F(" - mismatch -> loading initial configuration."));
 #endif
     set_complete_configuration();
     EEPROM.update(EEPROM_SOUND, sound);
   }
+
+#ifdef SHOW_DEBUG
   show_sound();
+#endif
 }
 
 void initial_values_from_eeprom(void)
@@ -621,7 +627,7 @@ uint32_t crc32(byte * calc_start, uint16_t calc_bytes) // base code from https:/
 //* DEBUG FUNCTIONS
 //*************************************************************************************************
 
-#if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
+#if defined (SHOW_DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
 void show_cpu_and_mem_usage(void)
 {
   Serial.print(F("CPU: "));

config.h

@@ -70,7 +70,7 @@
 //* DEBUG OUTPUT SETTINGS
 //*************************************************************************************************
 
-//#define DEBUG 1
+#define SHOW_DEBUG 1
 #define SERIAL_SPEED 38400
 #define SHOW_XRUN 1
 #define SHOW_CPU_LOAD_MSEC 5000
@@ -139,7 +139,7 @@
 //* DO NO CHANGE ANYTHING BEYOND IF YOU DON'T KNOW WHAT YOU ARE DOING !!!
 //*************************************************************************************************
 
-#define MICRO_MDAEPIANO_VERSION "0.9.3"
+#define MICRO_MDAEPIANO_VERSION "0.9.4"
 
 #define MAX_SOUNDS min(99,int((4096-EEPROM_CONFIGURATIONS)/sizeof(config_t)))