wirtz
/
MicroDexed
mirror of https://codeberg.org/dcoredump/MicroDexed.git
1
1
Fork 0
Code Issues Releases Wiki Activity

Disabled CPU_OVERLOAD_THROTTLE.

Browse Source 
Small fixes.
pull/32/head
Holger Wirtz 5 years ago
parent 5e1f304abd
commit 5ed8f5ee23
4 changed files with 24 additions and 15 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 23
      MicroDexed.ino
  2. 6
      config.h
  3. 2
      dexed.cpp
  4. 2
      dexed_sysex.cpp

23
MicroDexed.ino
Unescape View File

@ -258,7 +258,7 @@ void setup()
pinMode(U8X8_CS_PIN, OUTPUT);
#endif
delay(320); // necessary, because before this time no serial output is done :(
delay(320); // necessary, because before no serial output is done :(
#ifdef ENABLE_LCD_UI
setup_ui();
@ -271,6 +271,9 @@ void setup()
Serial.println(F("https://codeberg.org/dcoredump/MicroDexed"));
Serial.print(F("Version: "));
Serial.println(VERSION);
Serial.print(F("CPU-Speed: "));
Serial.print(F_CPU / 1000000.0, 1);
Serial.println(F(" MHz"));
Serial.println(F("<setup start>"));
Serial.flush();
@ -296,8 +299,9 @@ void setup()
}
}
/*
// Init EEPROM if both buttons are pressed at startup
/* if (digitalRead(BUT_R_PIN) == LOW)
if (digitalRead(BUT_R_PIN) == HIGH && digitalRead(BUT_L_PIN) == HIGH)
{
Serial.println(F("Init EEPROM"));
lcd.clear();
@ -306,9 +310,10 @@ void setup()
lcd.setCursor(0, 1);
lcd.print(F("EEPROM"));
initial_values_from_eeprom(true);
delay(2000);
}
else
initial_values_from_eeprom(false); */
*/
initial_values_from_eeprom(false);
#if defined(TEENSY_AUDIO_BOARD)
@ -650,7 +655,7 @@ void handleNoteOn(byte inChannel, byte inNumber, byte inVelocity)
{
if (checkMidiChannel(inChannel, instance_id))
{
if (inNumber >= configuration.dexed[instance_id].note_start && inNumber <= configuration.dexed[instance_id].note_end)
if (inNumber >= configuration.dexed[instance_id].lowest_note && inNumber <= configuration.dexed[instance_id].highest_note)
MicroDexed[instance_id]->keydown(inNumber, inVelocity);
}
}
@ -662,6 +667,7 @@ void handleNoteOff(byte inChannel, byte inNumber, byte inVelocity)
{
if (checkMidiChannel(inChannel, instance_id))
{
if (inNumber >= configuration.dexed[instance_id].lowest_note && inNumber <= configuration.dexed[instance_id].highest_note)
MicroDexed[instance_id]->keyup(inNumber);
}
}
@ -1408,8 +1414,8 @@ void init_configuration(void)
configuration.dexed[instance_id].midi_channel = DEFAULT_MIDI_CHANNEL;
configuration.dexed[instance_id].bank = SYSEXBANK_DEFAULT;
configuration.dexed[instance_id].voice = SYSEXSOUND_DEFAULT;
configuration.dexed[instance_id].note_start = INSTANCE_NOTE_START_DEFAULT;
configuration.dexed[instance_id].note_end = INSTANCE_NOTE_END_DEFAULT;
configuration.dexed[instance_id].lowest_note = INSTANCE_LOWEST_NOTE_MIN;
configuration.dexed[instance_id].highest_note = INSTANCE_HIGHEST_NOTE_MAX;
configuration.dexed[instance_id].reverb_send = REVERB_SEND_DEFAULT;
configuration.dexed[instance_id].chorus_send = CHORUS_SEND_DEFAULT;
configuration.dexed[instance_id].delay_send = DELAY_SEND_DEFAULT;
@ -1625,12 +1631,14 @@ void show_configuration(void)
Serial.print(F(" MIDI-Channel ")); Serial.println(configuration.dexed[instance_id].midi_channel, DEC);
Serial.print(F(" Bank ")); Serial.println(configuration.dexed[instance_id].bank, DEC);
Serial.print(F(" Voice ")); Serial.println(configuration.dexed[instance_id].voice, DEC);
Serial.print(F(" Lowest Note ")); Serial.println(configuration.dexed[instance_id].lowest_note, DEC);
Serial.print(F(" Highest Note ")); Serial.println(configuration.dexed[instance_id].highest_note, DEC);
Serial.print(F(" Reverb Send ")); Serial.println(configuration.dexed[instance_id].reverb_send, DEC);
Serial.print(F(" Chorus Send ")); Serial.println(configuration.dexed[instance_id].chorus_send, DEC);
Serial.print(F(" Delay Send ")); Serial.println(configuration.dexed[instance_id].delay_send, DEC);
Serial.print(F(" Filter Cutoff ")); Serial.println(configuration.dexed[instance_id].filter_cutoff, DEC);
Serial.print(F(" Filter Resonance ")); Serial.println(configuration.dexed[instance_id].filter_resonance, DEC);
Serial.print(F(" Loudness ")); Serial.println(configuration.dexed[instance_id].sound_intensity, DEC);
Serial.print(F(" Sound Intensity ")); Serial.println(configuration.dexed[instance_id].sound_intensity, DEC);
Serial.print(F(" Panorama ")); Serial.println(configuration.dexed[instance_id].pan, DEC);
Serial.print(F(" Transpose ")); Serial.println(configuration.dexed[instance_id].transpose, DEC);
Serial.print(F(" Tune ")); Serial.println(configuration.dexed[instance_id].tune, DEC);
@ -1646,6 +1654,7 @@ void show_configuration(void)
Serial.print(F(" BreathCtrl Range ")); Serial.println(configuration.dexed[instance_id].bc_range, DEC);
Serial.print(F(" Breathctrl Assign ")); Serial.println(configuration.dexed[instance_id].bc_assign, DEC);
Serial.print(F(" Aftertouch Range ")); Serial.println(configuration.dexed[instance_id].at_range, DEC);
Serial.print(F(" Aftertouch Assign ")); Serial.println(configuration.dexed[instance_id].at_range, DEC);
Serial.print(F(" Portamento Mode ")); Serial.println(configuration.dexed[instance_id].portamento_mode, DEC);
Serial.print(F(" Portamento Glissando ")); Serial.println(configuration.dexed[instance_id].portamento_glissando, DEC);
Serial.print(F(" Portamento Time ")); Serial.println(configuration.dexed[instance_id].portamento_time, DEC);

6
config.h
Unescape View File

@ -37,6 +37,7 @@
// 2. Build the firmware with "MIDI_DEVICE_USB" enabled in config.h.
// 3. Afterconnecting to a Linux system there should be a MIDI an audio device available that is called "MicroMDexed", so you can start the following:
// $ aplaymidi -p 20:0 <MIDI-File> # e.g. test.mid
// $ vkeybd --addr 20:0
// $ arecord -f cd -Dhw:1,0 /tmp/<AUDIO_FILE_NAME>.wav
//
@ -167,7 +168,7 @@
//#define SDCARD_SCK_PIN 14
#ifndef TEENSY4
// Teensy 3.5 & 3.6 SD card
#define SDCARD_CS_PIN 4 //BUILTIN_SDCARD
#define SDCARD_CS_PIN BUILTIN_SDCARD
#define SDCARD_MOSI_PIN 11
#define SDCARD_SCK_PIN 13
#else
@ -212,7 +213,7 @@
#define NUM_DEXED 1
#define MAX_DEXED 2
#define NORMALIZE_DX_VELOCITY 1
#define CPU_OVERLOAD_THROTTLE 95.0 // Level (in percent) when throttling should start
//#define CPU_OVERLOAD_THROTTLE 95.0 // Level (in percent) when throttling should start
#define CPU_OVERLOAD_THROTTLE_TIMER 100 // timer (in ms) when next throttling is possible
enum { DEXED, CHORUS, DELAY, REVERB};
@ -446,7 +447,6 @@ enum { DEXED, CHORUS, DELAY, REVERB};
#define INSTANCE_NOTE_START_MAX MIDI_B7
#define INSTANCE_NOTE_START_DEFAULT INSTANCE_NOTE_START_MIN
=======
#define INSTANCE_NOTE_END_MIN MIDI_AIS0
#define INSTANCE_NOTE_END_MAX MIDI_B7
#define INSTANCE_NOTE_END_DEFAULT INSTANCE_NOTE_END_MAX

2
dexed.cpp
Unescape View File

@ -190,7 +190,7 @@ void Dexed::keydown(int16_t pitch, uint8_t velo) {
pitch += data[144] - TRANSPOSE_FIX;
#if defined(NORMALIZE_DX_VELOCITY)
velo = ((float)velo) * 0.7874015; // 100/127
velo = (((float)velo) * 0.7874015 + 0.5); // 100/127
#endif
int previousKeyDown = lastKeyDown;

2
dexed_sysex.cpp
Unescape View File

@ -531,7 +531,7 @@ bool save_sysex_setup(uint8_t b, uint8_t v, config_t configuration)
create_sysex_filename(b, sysex_file_name, v);
sysex = SD.create(sysex_file_name);
sysex = SD.open(sysex_file_name);
if (!sysex)
{
#ifdef DEBUG

Write Preview
Loading…
Cancel
Save