/* Uart MIDI Sync Box
 *  
 * This example demonstrates how to send MIDI data via Uart 
 * interface on STM32 family. 
 * 
 * This example code is in the public domain.
 * 
 * ...
 * 
 */
#include <uClock.h>

// MIDI clock, start and stop byte definitions - based on MIDI 1.0 Standards.
#define MIDI_CLOCK 0xF8
#define MIDI_START 0xFA
#define MIDI_STOP  0xFC

// the blue led
#define LED_BUILTIN    2

uint8_t bpm_blink_timer = 1;
void handle_bpm_led(uint32_t tick)
{
  // BPM led indicator
  if ( !(tick % (96)) || (tick == 1) ) {  // first compass step will flash longer
    bpm_blink_timer = 8;
    digitalWrite(LED_BUILTIN, HIGH);
  } else if ( !(tick % (24)) ) {   // each quarter led on
    bpm_blink_timer = 1;
    digitalWrite(LED_BUILTIN, HIGH);
  } else if ( !(tick % bpm_blink_timer) ) { // get led off
    digitalWrite(LED_BUILTIN, LOW);
  }
}

// Internal clock handlers
void ClockOut96PPQN(uint32_t tick) {
  // Send MIDI_CLOCK to external gears
  Serial.write(MIDI_CLOCK);
  handle_bpm_led(tick);
}

void onClockStart() {
  Serial.write(MIDI_START);
}

void onClockStop() {
  Serial.write(MIDI_STOP);
}

void setup() {
  // Initialize serial communication at 31250 bits per second, the default MIDI serial speed communication:
  Serial.begin(31250);

  // A led to count bpms
  pinMode(LED_BUILTIN, OUTPUT);
  
  // Setup our clock system
  // Inits the clock
  uClock.init();
  // Set the callback function for the clock output to send MIDI Sync message.
  uClock.setClock96PPQNOutput(ClockOut96PPQN);
  // Set the callback function for MIDI Start and Stop messages.
  uClock.setOnClockStartOutput(onClockStart);  
  uClock.setOnClockStopOutput(onClockStop);
  // Set the clock BPM to 126 BPM
  uClock.setTempo(126);
  // Starts the clock, tick-tac-tick-tac...
  uClock.start();
}

// Do it whatever to interface with Clock.stop(), Clock.start(), Clock.setTempo() and integrate your environment...
void loop() {
  
}