diff --git a/README.md b/README.md
index c663d48..08d1864 100755
--- a/README.md
+++ b/README.md
@@ -1,6 +1,6 @@
 # uClock
 
-**BPM clock generator for Arduino and Teensy** is a library to implement BPM clock tick calls using **hardware interruption** for tight and solid timing clock ticks. Tested on ATmega168/328, ATmega16u4/32u4, ATmega2560 and Teensy LC.
+**BPM clock generator for Arduino and Teensy** is a library to implement BPM clock tick calls using **hardware interruption** for tight and solid timing clock ticks. Tested on ATmega168/328, ATmega16u4/32u4, ATmega2560, Teensy ARM boards and Seedstudio XIAO M0.
 
 Generate your self tight BPM clock for music, audio/video productions, performances or installations. You can clock your MIDI setup or sync different protocols as you wish.
 
@@ -34,7 +34,7 @@ Here is an example on how to create a simple MIDI Sync Box on Arduino boards
 #define MIDI_STOP  0xFC
 
 // The callback function wich will be called by Clock each Pulse of 96PPQN clock resolution.
-void ClockOut96PPQN(uint32_t * tick) {
+void ClockOut96PPQN(uint32_t tick) {
   // Send MIDI_CLOCK to external gears
   Serial.write(MIDI_CLOCK);
 }
@@ -81,7 +81,7 @@ An example on how to create a simple MIDI Sync Box on Teensy boards and USB Midi
 #include <uClock.h>
 
 // The callback function wich will be called by Clock each Pulse of 96PPQN clock resolution.
-void ClockOut96PPQN(uint32_t * tick) {
+void ClockOut96PPQN(uint32_t tick) {
   // Send MIDI_CLOCK to external gears
   usbMIDI.sendRealTime(usbMIDI.Clock);
 }
@@ -185,13 +185,13 @@ void sendMidiMessage(uint8_t command, uint8_t byte1, uint8_t byte2)
 }
 
 // The callback function wich will be called by uClock each Pulse of 16PPQN clock resolution. Each call represents exactly one step.
-void ClockOut16PPQN(uint32_t * tick) 
+void ClockOut16PPQN(uint32_t tick) 
 {
   uint16_t step;
   uint16_t length = NOTE_LENGTH;
   
   // get actual step.
-  _step = *tick % _step_length;
+  _step = tick % _step_length;
   
   // send note on only if this step are not in rest mode
   if ( _sequencer[_step].rest == false ) {
@@ -223,7 +223,7 @@ void ClockOut16PPQN(uint32_t * tick)
 }
 
 // The callback function wich will be called by uClock each Pulse of 96PPQN clock resolution.
-void ClockOut96PPQN(uint32_t * tick) 
+void ClockOut96PPQN(uint32_t tick) 
 {
   // Send MIDI_CLOCK to external hardware
   Serial.write(MIDI_CLOCK);
diff --git a/library.properties b/library.properties
index d213f22..310f3c8 100755
--- a/library.properties
+++ b/library.properties
@@ -1,9 +1,9 @@
 name=uClock
-version=1.0.0
+version=1.1.0
 author=Romulo Silva <contact@midilab.co>
 maintainer=Romulo Silva <contact@midilab.co>
 sentence=BPM clock generator for Arduino and Teensy boards
-paragraph=A Library to implement BPM clock tick calls using hardware interruption. Tested on ATmega168/328, ATmega16u4/32u4, ATmega2560, Teensy ARM boards and Seedstudio XIAO M0 SAMD..
+paragraph=A Library to implement BPM clock tick calls using hardware interruption. Tested on ATmega168/328, ATmega16u4/32u4, ATmega2560, Teensy ARM boards and Seedstudio XIAO M0
 category=Timing
 url=https://github.com/midilab/uClock
 architectures=avr,arm,samd
diff --git a/src/uClock.cpp b/src/uClock.cpp
index 0c72666..1f9572b 100755
--- a/src/uClock.cpp
+++ b/src/uClock.cpp
@@ -1,10 +1,10 @@
 /*!
  *  @file       uClock.cpp
  *  Project     BPM clock generator for Arduino
- *  @brief      A Library to implement BPM clock tick calls using hardware timer interruption. Tested on ATmega168/328, ATmega16u4/32u4 and ATmega2560 and Teensy LC.
- *  @version    1.0.0
+ *  @brief      A Library to implement BPM clock tick calls using hardware timer interruption. Tested on ATmega168/328, ATmega16u4/32u4, ATmega2560, Teensy ARM boards and Seedstudio XIAO M0
+ *  @version    1.1.0
  *  @author     Romulo Silva
- *  @date       01/04/2022
+ *  @date       04/03/2022
  *  @license    MIT - (c) 2022 - Romulo Silva - contact@midilab.co
  *
  * Permission is hereby granted, free of charge, to any person obtaining a
@@ -45,7 +45,7 @@ TimerTCC0 _uclockTimer;
 void uclockInitTimer()
 {
 	ATOMIC(
-		// Timer1 init
+		// 16bits Timer1 init
 		// begin at 120bpm (48.0007680122882 Hz)
 		TCCR1A = 0; // set entire TCCR1A register to 0
 		TCCR1B = 0; // same for TCCR1B
@@ -66,23 +66,23 @@ void uclockInitTimer()
 {
 	// begin at 120bpm (20833us)
 	const uint16_t init_clock = 20833;
-#if defined(TEENSYDUINO)
-	_uclockTimer.begin(uclockISR, init_clock); 
-
-	// Set the interrupt priority level, controlling which other interrupts
-	// this timer is allowed to interrupt. Lower numbers are higher priority, 
-	// with 0 the highest and 255 the lowest. Most other interrupts default to 128. 
-	// As a general guideline, interrupt routines that run longer should be given 
-	// lower priority (higher numerical values).
-	_uclockTimer.priority(0);
-#endif
+	#if defined(TEENSYDUINO)
+		_uclockTimer.begin(uclockISR, init_clock); 
+
+		// Set the interrupt priority level, controlling which other interrupts
+		// this timer is allowed to interrupt. Lower numbers are higher priority, 
+		// with 0 the highest and 255 the lowest. Most other interrupts default to 128. 
+		// As a general guideline, interrupt routines that run longer should be given 
+		// lower priority (higher numerical values).
+		_uclockTimer.priority(0);
+	#endif
 
-#if defined(SEEED_XIAO_M0)
-	_uclockTimer.initialize(init_clock);
+	#if defined(SEEED_XIAO_M0)
+		_uclockTimer.initialize(init_clock);
 
-	// attach to generic uclock ISR
-	_uclockTimer.attachInterrupt(uclockISR);
-#endif
+		// attach to generic uclock ISR
+		_uclockTimer.attachInterrupt(uclockISR);
+	#endif
 }
 #endif
 
diff --git a/src/uClock.h b/src/uClock.h
index 083f1f8..46c667d 100755
--- a/src/uClock.h
+++ b/src/uClock.h
@@ -1,10 +1,10 @@
 /*!
  *  @file       uClock.h
  *  Project     BPM clock generator for Arduino
- *  @brief      A Library to implement BPM clock tick calls using hardware timer interruption. Tested on ATmega168/328, ATmega16u4/32u4 and ATmega2560 and Teensy LC.
- *  @version    1.0.0
+ *  @brief      A Library to implement BPM clock tick calls using hardware timer interruption. Tested on ATmega168/328, ATmega16u4/32u4, ATmega2560, Teensy ARM boards and Seedstudio XIAO M0
+ *  @version    1.1.0
  *  @author     Romulo Silva
- *  @date       01/04/2022
+ *  @date       04/03/2022
  *  @license    MIT - (c) 2022 - Romulo Silva - contact@midilab.co
  *
  * Permission is hereby granted, free of charge, to any person obtaining a
@@ -34,25 +34,25 @@
 
 namespace umodular { namespace clock {
 
-#define AVR_CLOCK_FREQ	16000000
-
-#define PHASE_FACTOR 16
-
-#define PLL_X 220
-
 // for smooth slave tempo calculate display you should raise this value 
 // in between 64 to 128.
 // note: this doesn't impact on sync time, only display time getTempo()
 // if you dont want to use it, set it to 1 for memory save
 #define EXT_INTERVAL_BUFFER_SIZE 24
 
+#define MIN_BPM	1
+#define MAX_BPM	300
+
+// want a different avr clock support?
+#define AVR_CLOCK_FREQ	16000000
+
+#define PHASE_FACTOR 16
+#define PLL_X 220
+
 #define SECS_PER_MIN  (60UL)
 #define SECS_PER_HOUR (3600UL)
 #define SECS_PER_DAY  (SECS_PER_HOUR * 24L)
 
-#define MIN_BPM	1
-#define MAX_BPM	300
-
 #define ATOMIC(X) noInterrupts(); X; interrupts();
 
 class uClockClass {