mirror of https://github.com/jeelabs/esp-link.git
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
505 lines
19 KiB
505 lines
19 KiB
#
|
|
# Makefile for esp-link - https://github.com/jeelabs/esp-link
|
|
#
|
|
# Makefile heavily adapted to esp-link and wireless flashing by Thorsten von Eicken
|
|
# Lots of work, in particular to support windows, by brunnels
|
|
# Original from esphttpd and others...
|
|
# VERBOSE=1
|
|
#
|
|
# Start by setting the directories for the toolchain a few lines down
|
|
# the default target will build the firmware images
|
|
# `make flash` will flash the esp serially
|
|
# `make wiflash` will flash the esp over wifi
|
|
# `VERBOSE=1 make ...` will print debug info
|
|
# `ESP_HOSTNAME=my.esp.example.com make wiflash` is an easy way to override a variable
|
|
|
|
# optional local configuration file
|
|
-include local.conf
|
|
|
|
# The Wifi station configuration can be hard-coded here, which makes esp-link come up in STA+AP
|
|
# mode trying to connect to the specified AP *only* if the flash wireless settings are empty!
|
|
# This happens on a full serial flash and avoids having to hunt for the AP...
|
|
# STA_SSID ?=
|
|
# STA_PASS ?=
|
|
|
|
# The SOFTAP configuration can be hard-coded here, the minimum parameters to set are AP_SSID && AP_PASS
|
|
# The AP SSID has to be at least 8 characters long, same for AP PASSWORD
|
|
# The AP AUTH MODE can be set to:
|
|
# 0 = AUTH_OPEN,
|
|
# 1 = AUTH_WEP,
|
|
# 2 = AUTH_WPA_PSK,
|
|
# 3 = AUTH_WPA2_PSK,
|
|
# 4 = AUTH_WPA_WPA2_PSK
|
|
# SSID hidden default 0, ( 0 | 1 )
|
|
# Max connections default 4, ( 1 ~ 4 )
|
|
# Beacon interval default 100, ( 100 ~ 60000ms )
|
|
#
|
|
# AP_SSID ?=esp_link_test
|
|
# AP_PASS ?=esp_link_test
|
|
# AP_AUTH_MODE ?=4
|
|
# AP_SSID_HIDDEN ?=0
|
|
# AP_MAX_CONN ?=4
|
|
# AP_BEACON_INTERVAL ?=100
|
|
|
|
# If CHANGE_TO_STA is set to "yes" the esp-link module will switch to station mode
|
|
# once successfully connected to an access point. Else it will stay in STA+AP mode.
|
|
CHANGE_TO_STA ?= yes
|
|
|
|
# hostname or IP address for wifi flashing
|
|
ESP_HOSTNAME ?= esp-link
|
|
|
|
# --------------- toolchain configuration ---------------
|
|
|
|
# Base directory for the compiler. Needs a / at the end.
|
|
# Typically you'll install https://github.com/pfalcon/esp-open-sdk
|
|
XTENSA_TOOLS_ROOT ?= $(abspath ../esp-open-sdk/xtensa-lx106-elf/bin)/
|
|
|
|
# Firmware version
|
|
# WARNING: if you change this expect to make code adjustments elsewhere, don't expect
|
|
# that esp-link will magically work with a different version of the SDK!!!
|
|
SDK_VERS ?= esp_iot_sdk_v1.5.4
|
|
#SDK_VERS ?= esp_iot_sdk_v2.0.0
|
|
|
|
# Try to find the firmware manually extracted, e.g. after downloading from Espressif's BBS,
|
|
# http://bbs.espressif.com/viewforum.php?f=46
|
|
SDK_BASE ?= $(wildcard ../$(SDK_VERS))
|
|
|
|
# If the firmware isn't there, see whether it got downloaded as part of esp-open-sdk
|
|
ifeq ($(SDK_BASE),)
|
|
SDK_BASE := $(wildcard $(XTENSA_TOOLS_ROOT)/../../$(SDK_VERS))
|
|
endif
|
|
|
|
# Clean up SDK path
|
|
SDK_BASE := $(abspath $(SDK_BASE))
|
|
$(warning Using SDK from $(SDK_BASE))
|
|
|
|
# Path to bootloader file
|
|
BOOTFILE ?= $(SDK_BASE/bin/boot_v1.5.bin)
|
|
|
|
# Esptool.py path and port, only used for 1-time serial flashing
|
|
# Typically you'll use https://github.com/themadinventor/esptool
|
|
# Windows users use the com port i.e: ESPPORT ?= com3
|
|
ESPTOOL ?= $(abspath ../esp-open-sdk/esptool/esptool.py)
|
|
ESPPORT ?= /dev/ttyUSB0
|
|
ESPBAUD ?= 460800
|
|
|
|
# --------------- chipset configuration ---------------
|
|
|
|
# Pick your flash size: "512KB", "1MB", or "4MB"
|
|
FLASH_SIZE ?= 4MB
|
|
|
|
# The pin assignments below are used when the settings in flash are invalid, they
|
|
# can be changed via the web interface
|
|
# GPIO pin used to reset attached microcontroller, acative low
|
|
MCU_RESET_PIN ?= 12
|
|
# GPIO pin used with reset to reprogram MCU (ISP=in-system-programming, unused with AVRs), active low
|
|
MCU_ISP_PIN ?= 13
|
|
# GPIO pin used for "connectivity" LED, active low
|
|
LED_CONN_PIN ?= 0
|
|
# GPIO pin used for "serial activity" LED, active low
|
|
LED_SERIAL_PIN ?= 14
|
|
|
|
# --------------- esp-link modules config options ---------------
|
|
|
|
# Optional Modules mqtt
|
|
MODULES ?= mqtt rest socket syslog
|
|
|
|
# --------------- esphttpd config options ---------------
|
|
|
|
# If GZIP_COMPRESSION is set to "yes" then the static css, js, and html files will be compressed
|
|
# with gzip before added to the espfs image and will be served with gzip Content-Encoding header.
|
|
# This could speed up the downloading of these files, but might break compatibility with older
|
|
# web browsers not supporting gzip encoding because Accept-Encoding is simply ignored.
|
|
# Enable this option if you have large static files to serve (for e.g. JQuery, Twitter bootstrap)
|
|
# If you have text based static files with different extensions what you want to serve compressed
|
|
# then you will need to add the extension to the following places:
|
|
# - Add the extension to this Makefile at the webpages.espfs target to the find command
|
|
# - Add the extension to the gzippedFileTypes array in the user/httpd.c file
|
|
#
|
|
# Adding JPG or PNG files (and any other compressed formats) is not recommended, because GZIP
|
|
# compression does not work effectively on compressed files.
|
|
|
|
#Static gzipping is disabled by default.
|
|
GZIP_COMPRESSION ?= yes
|
|
|
|
# If COMPRESS_W_HTMLCOMPRESSOR is set to "yes" then the static css and js files will be compressed with
|
|
# htmlcompressor and yui-compressor. This option works only when GZIP_COMPRESSION is set to "yes".
|
|
# https://code.google.com/p/htmlcompressor/#For_Non-Java_Projects
|
|
# http://yui.github.io/yuicompressor/
|
|
# enabled by default.
|
|
COMPRESS_W_HTMLCOMPRESSOR ?= yes
|
|
HTML_COMPRESSOR ?= htmlcompressor-1.5.3.jar
|
|
YUI_COMPRESSOR ?= yuicompressor-2.4.8.jar
|
|
|
|
# -------------- End of config options -------------
|
|
|
|
HTML_PATH = $(abspath ./html)/
|
|
WIFI_PATH = $(HTML_PATH)wifi/
|
|
|
|
ESP_FLASH_MAX ?= 503808 # max bin file
|
|
|
|
ifeq ("$(FLASH_SIZE)","512KB")
|
|
# Winbond 25Q40 512KB flash, typ for esp-01 thru esp-11
|
|
ESP_SPI_SIZE ?= 0 # 0->512KB (256KB+256KB)
|
|
ESP_FLASH_MODE ?= 0 # 0->QIO
|
|
ESP_FLASH_FREQ_DIV ?= 0 # 0->40Mhz
|
|
ET_FS ?= 4m # 4Mbit flash size in esptool flash command
|
|
ET_FF ?= 40m # 40Mhz flash speed in esptool flash command
|
|
ET_BLANK ?= 0x7E000 # where to flash blank.bin to erase wireless settings
|
|
|
|
else ifeq ("$(FLASH_SIZE)","1MB")
|
|
# ESP-01E
|
|
ESP_SPI_SIZE ?= 2 # 2->1MB (512KB+512KB)
|
|
ESP_FLASH_MODE ?= 0 # 0->QIO
|
|
ESP_FLASH_FREQ_DIV ?= 15 # 15->80MHz
|
|
ET_FS ?= 8m # 8Mbit flash size in esptool flash command
|
|
ET_FF ?= 80m # 80Mhz flash speed in esptool flash command
|
|
ET_BLANK ?= 0xFE000 # where to flash blank.bin to erase wireless settings
|
|
|
|
else ifeq ("$(FLASH_SIZE)","2MB")
|
|
# Manuf 0xA1 Chip 0x4015 found on wroom-02 modules
|
|
# Here we're using two partitions of approx 0.5MB because that's what's easily available in terms
|
|
# of linker scripts in the SDK. Ideally we'd use two partitions of approx 1MB, the remaining 2MB
|
|
# cannot be used for code (esp8266 limitation).
|
|
ESP_SPI_SIZE ?= 4 # 6->4MB (1MB+1MB) or 4->4MB (512KB+512KB)
|
|
ESP_FLASH_MODE ?= 0 # 0->QIO, 2->DIO
|
|
ESP_FLASH_FREQ_DIV ?= 15 # 15->80Mhz
|
|
ET_FS ?= 16m # 16Mbit flash size in esptool flash command
|
|
ET_FF ?= 80m # 80Mhz flash speed in esptool flash command
|
|
ET_BLANK ?= 0x1FE000 # where to flash blank.bin to erase wireless settings
|
|
|
|
else
|
|
# Winbond 25Q32 4MB flash, typ for esp-12
|
|
# Here we're using two partitions of approx 0.5MB because that's what's easily available in terms
|
|
# of linker scripts in the SDK. Ideally we'd use two partitions of approx 1MB, the remaining 2MB
|
|
# cannot be used for code (esp8266 limitation).
|
|
ESP_SPI_SIZE ?= 4 # 6->4MB (1MB+1MB) or 4->4MB (512KB+512KB)
|
|
ESP_FLASH_MODE ?= 0 # 0->QIO, 2->DIO
|
|
ESP_FLASH_FREQ_DIV ?= 15 # 15->80Mhz
|
|
ET_FS ?= 32m # 32Mbit flash size in esptool flash command
|
|
ET_FF ?= 80m # 80Mhz flash speed in esptool flash command
|
|
ET_BLANK ?= 0x3FE000 # where to flash blank.bin to erase wireless settings
|
|
endif
|
|
|
|
# --------------- esp-link version ---------------
|
|
|
|
# This queries git to produce a version string like "esp-link v0.9.0 2015-06-01 34bc76"
|
|
# If you don't have a proper git checkout or are on windows, then simply swap for the constant
|
|
# Steps to release: create release on github, git pull, git describe --tags to verify you're
|
|
# on the release tag, make release, upload esp-link.tgz into the release files
|
|
#VERSION ?= "esp-link custom version"
|
|
DATE := $(shell date '+%F %T')
|
|
BRANCH ?= $(shell if git diff --quiet HEAD; then git describe --tags; \
|
|
else git symbolic-ref --short HEAD; fi)
|
|
SHA := $(shell if git diff --quiet HEAD; then git rev-parse --short HEAD | cut -d"/" -f 3; \
|
|
else echo "development"; fi)
|
|
VERSION ?=esp-link $(BRANCH) - $(DATE) - $(SHA)
|
|
|
|
# Output directors to store intermediate compiled files
|
|
# relative to the project directory
|
|
BUILD_BASE = build
|
|
FW_BASE = firmware
|
|
|
|
# name for the target project
|
|
TARGET = httpd
|
|
|
|
# espressif tool to concatenate sections for OTA upload using bootloader v1.2+
|
|
APPGEN_TOOL ?= gen_appbin.py
|
|
|
|
CFLAGS=
|
|
|
|
# set defines for optional modules
|
|
ifneq (,$(findstring mqtt,$(MODULES)))
|
|
CFLAGS += -DMQTT
|
|
endif
|
|
|
|
ifneq (,$(findstring rest,$(MODULES)))
|
|
CFLAGS += -DREST
|
|
endif
|
|
|
|
ifneq (,$(findstring socket,$(MODULES)))
|
|
CFLAGS += -DSOCKET
|
|
endif
|
|
|
|
ifneq (,$(findstring syslog,$(MODULES)))
|
|
CFLAGS += -DSYSLOG
|
|
endif
|
|
|
|
# which modules (subdirectories) of the project to include in compiling
|
|
LIBRARIES_DIR = libraries
|
|
MODULES += espfs httpd user serial cmd esp-link
|
|
MODULES += $(foreach sdir,$(LIBRARIES_DIR),$(wildcard $(sdir)/*))
|
|
EXTRA_INCDIR = include .
|
|
|
|
# libraries used in this project, mainly provided by the SDK
|
|
LIBS = c gcc hal phy pp net80211 wpa main lwip crypto
|
|
|
|
# compiler flags using during compilation of source files
|
|
CFLAGS += -Os -ggdb -std=c99 -Werror -Wpointer-arith -Wundef -Wall -Wl,-EL -fno-inline-functions \
|
|
-nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections \
|
|
-D__ets__ -DICACHE_FLASH -Wno-address -DFIRMWARE_SIZE=$(ESP_FLASH_MAX) \
|
|
-DMCU_RESET_PIN=$(MCU_RESET_PIN) -DMCU_ISP_PIN=$(MCU_ISP_PIN) \
|
|
-DLED_CONN_PIN=$(LED_CONN_PIN) -DLED_SERIAL_PIN=$(LED_SERIAL_PIN) \
|
|
-DVERSION="$(VERSION)"
|
|
|
|
# linker flags used to generate the main object file
|
|
LDFLAGS = -nostdlib -Wl,--no-check-sections -u call_user_start -Wl,-static -Wl,--gc-sections
|
|
|
|
# linker script used for the above linker step
|
|
LD_SCRIPT := build/eagle.esphttpd.v6.ld
|
|
LD_SCRIPT1 := build/eagle.esphttpd1.v6.ld
|
|
LD_SCRIPT2 := build/eagle.esphttpd2.v6.ld
|
|
|
|
# various paths from the SDK used in this project
|
|
SDK_LIBDIR = lib
|
|
SDK_LDDIR = ld
|
|
SDK_INCDIR = include include/json
|
|
SDK_TOOLSDIR = tools
|
|
|
|
# select which tools to use as compiler, librarian and linker
|
|
CC := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-gcc
|
|
AR := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-ar
|
|
LD := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-gcc
|
|
OBJCP := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-objcopy
|
|
OBJDP := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-objdump
|
|
|
|
|
|
####
|
|
SRC_DIR := $(MODULES)
|
|
BUILD_DIR := $(addprefix $(BUILD_BASE)/,$(MODULES))
|
|
|
|
SDK_LIBDIR := $(addprefix $(SDK_BASE)/,$(SDK_LIBDIR))
|
|
SDK_LDDIR := $(addprefix $(SDK_BASE)/,$(SDK_LDDIR))
|
|
SDK_INCDIR := $(addprefix -I$(SDK_BASE)/,$(SDK_INCDIR))
|
|
SDK_TOOLS := $(addprefix $(SDK_BASE)/,$(SDK_TOOLSDIR))
|
|
APPGEN_TOOL := $(addprefix $(SDK_TOOLS)/,$(APPGEN_TOOL))
|
|
|
|
SRC := $(foreach sdir,$(SRC_DIR),$(wildcard $(sdir)/*.c))
|
|
OBJ := $(patsubst %.c,$(BUILD_BASE)/%.o,$(SRC)) $(BUILD_BASE)/espfs_img.o
|
|
LIBS := $(addprefix -l,$(LIBS))
|
|
APP_AR := $(addprefix $(BUILD_BASE)/,$(TARGET)_app.a)
|
|
USER1_OUT := $(addprefix $(BUILD_BASE)/,$(TARGET).user1.out)
|
|
USER2_OUT := $(addprefix $(BUILD_BASE)/,$(TARGET).user2.out)
|
|
|
|
INCDIR := $(addprefix -I,$(SRC_DIR))
|
|
EXTRA_INCDIR := $(addprefix -I,$(EXTRA_INCDIR))
|
|
MODULE_INCDIR := $(addsuffix /include,$(INCDIR))
|
|
|
|
V ?= $(VERBOSE)
|
|
ifeq ("$(V)","1")
|
|
Q :=
|
|
vecho := @true
|
|
else
|
|
Q := @
|
|
vecho := @echo
|
|
endif
|
|
|
|
ifneq ($(strip $(STA_SSID)),)
|
|
CFLAGS += -DSTA_SSID="$(STA_SSID)"
|
|
endif
|
|
|
|
ifneq ($(strip $(STA_PASS)),)
|
|
CFLAGS += -DSTA_PASS="$(STA_PASS)"
|
|
endif
|
|
|
|
ifneq ($(strip $(AP_SSID)),)
|
|
CFLAGS += -DAP_SSID="$(AP_SSID)"
|
|
endif
|
|
|
|
ifneq ($(strip $(AP_PASS)),)
|
|
CFLAGS += -DAP_PASS="$(AP_PASS)"
|
|
endif
|
|
|
|
ifneq ($(strip $(AP_AUTH_MODE)),)
|
|
CFLAGS += -DAP_AUTH_MODE="$(AP_AUTH_MODE)"
|
|
endif
|
|
|
|
ifneq ($(strip $(AP_SSID_HIDDEN)),)
|
|
CFLAGS += -DAP_SSID_HIDDEN="$(AP_SSID_HIDDEN)"
|
|
endif
|
|
|
|
ifneq ($(strip $(AP_MAX_CONN)),)
|
|
CFLAGS += -DAP_MAX_CONN="$(AP_MAX_CONN)"
|
|
endif
|
|
|
|
ifneq ($(strip $(AP_BEACON_INTERVAL)),)
|
|
CFLAGS += -DAP_BEACON_INTERVAL="$(AP_BEACON_INTERVAL)"
|
|
endif
|
|
|
|
ifeq ("$(GZIP_COMPRESSION)","yes")
|
|
CFLAGS += -DGZIP_COMPRESSION
|
|
endif
|
|
|
|
ifeq ("$(CHANGE_TO_STA)","yes")
|
|
CFLAGS += -DCHANGE_TO_STA
|
|
endif
|
|
|
|
vpath %.c $(SRC_DIR)
|
|
|
|
define compile-objects
|
|
$1/%.o: %.c
|
|
$(vecho) "CC $$<"
|
|
$(Q)$(CC) $(INCDIR) $(MODULE_INCDIR) $(EXTRA_INCDIR) $(SDK_INCDIR) $(CFLAGS) -c $$< -o $$@
|
|
endef
|
|
|
|
.PHONY: all checkdirs clean webpages.espfs wiflash
|
|
|
|
all: echo_version checkdirs $(FW_BASE)/user1.bin $(FW_BASE)/user2.bin
|
|
|
|
echo_version:
|
|
@echo VERSION: $(VERSION)
|
|
|
|
$(USER1_OUT): $(APP_AR) $(LD_SCRIPT1)
|
|
$(vecho) "LD $@"
|
|
$(Q) $(LD) -L$(SDK_LIBDIR) -T$(LD_SCRIPT1) $(LDFLAGS) -Wl,--start-group $(LIBS) $(APP_AR) -Wl,--end-group -o $@
|
|
@echo Dump : $(OBJDP) -x $(USER1_OUT)
|
|
@echo Disass: $(OBJDP) -d -l -x $(USER1_OUT)
|
|
# $(Q) $(OBJDP) -x $(TARGET_OUT) | egrep espfs_img
|
|
|
|
$(USER2_OUT): $(APP_AR) $(LD_SCRIPT2)
|
|
$(vecho) "LD $@"
|
|
$(Q) $(LD) -L$(SDK_LIBDIR) -T$(LD_SCRIPT2) $(LDFLAGS) -Wl,--start-group $(LIBS) $(APP_AR) -Wl,--end-group -o $@
|
|
# $(Q) $(OBJDP) -x $(TARGET_OUT) | egrep espfs_img
|
|
|
|
$(FW_BASE):
|
|
$(vecho) "FW $@"
|
|
$(Q) mkdir -p $@
|
|
|
|
$(FW_BASE)/user1.bin: $(USER1_OUT) $(FW_BASE)
|
|
$(Q) $(OBJCP) --only-section .text -O binary $(USER1_OUT) eagle.app.v6.text.bin
|
|
$(Q) $(OBJCP) --only-section .data -O binary $(USER1_OUT) eagle.app.v6.data.bin
|
|
$(Q) $(OBJCP) --only-section .rodata -O binary $(USER1_OUT) eagle.app.v6.rodata.bin
|
|
$(Q) $(OBJCP) --only-section .irom0.text -O binary $(USER1_OUT) eagle.app.v6.irom0text.bin
|
|
ls -ls eagle*bin
|
|
$(Q) COMPILE=gcc PATH=$(XTENSA_TOOLS_ROOT):$(PATH) python $(APPGEN_TOOL) $(USER1_OUT) 2 $(ESP_FLASH_MODE) $(ESP_FLASH_FREQ_DIV) $(ESP_SPI_SIZE) 0
|
|
$(Q) rm -f eagle.app.v6.*.bin
|
|
$(Q) mv eagle.app.flash.bin $@
|
|
@echo "** user1.bin uses $$(stat -c '%s' $@) bytes of" $(ESP_FLASH_MAX) "available"
|
|
$(Q) if [ $$(stat -c '%s' $@) -gt $$(( $(ESP_FLASH_MAX) )) ]; then echo "$@ too big!"; false; fi
|
|
|
|
$(FW_BASE)/user2.bin: $(USER2_OUT) $(FW_BASE)
|
|
$(Q) $(OBJCP) --only-section .text -O binary $(USER2_OUT) eagle.app.v6.text.bin
|
|
$(Q) $(OBJCP) --only-section .data -O binary $(USER2_OUT) eagle.app.v6.data.bin
|
|
$(Q) $(OBJCP) --only-section .rodata -O binary $(USER2_OUT) eagle.app.v6.rodata.bin
|
|
$(Q) $(OBJCP) --only-section .irom0.text -O binary $(USER2_OUT) eagle.app.v6.irom0text.bin
|
|
$(Q) COMPILE=gcc PATH=$(XTENSA_TOOLS_ROOT):$(PATH) python $(APPGEN_TOOL) $(USER2_OUT) 2 $(ESP_FLASH_MODE) $(ESP_FLASH_FREQ_DIV) $(ESP_SPI_SIZE) 0
|
|
$(Q) rm -f eagle.app.v6.*.bin
|
|
$(Q) mv eagle.app.flash.bin $@
|
|
$(Q) if [ $$(stat -c '%s' $@) -gt $$(( $(ESP_FLASH_MAX) )) ]; then echo "$@ too big!"; false; fi
|
|
|
|
$(APP_AR): $(OBJ)
|
|
$(vecho) "AR $@"
|
|
$(Q) $(AR) cru $@ $^
|
|
|
|
checkdirs: $(BUILD_DIR)
|
|
|
|
$(BUILD_DIR):
|
|
$(Q) mkdir -p $@
|
|
|
|
wiflash: all
|
|
./wiflash $(ESP_HOSTNAME) $(FW_BASE)/user1.bin $(FW_BASE)/user2.bin
|
|
|
|
baseflash: all
|
|
$(Q) $(ESPTOOL) --port $(ESPPORT) --baud $(ESPBAUD) write_flash 0x01000 $(FW_BASE)/user1.bin
|
|
|
|
flash: all
|
|
$(Q) $(ESPTOOL) --port $(ESPPORT) --baud $(ESPBAUD) write_flash -fs $(ET_FS) -ff $(ET_FF) \
|
|
0x00000 "$(SDK_BASE)/bin/boot_v1.5.bin" 0x01000 $(FW_BASE)/user1.bin \
|
|
$(ET_BLANK) $(SDK_BASE)/bin/blank.bin
|
|
|
|
ifeq ($(OS),Windows_NT)
|
|
tools/$(HTML_COMPRESSOR):
|
|
$(Q) mkdir -p tools
|
|
cd tools; wget --no-check-certificate https://github.com/yui/yuicompressor/releases/download/v2.4.8/$(YUI_COMPRESSOR) -O $(YUI_COMPRESSOR)
|
|
cd tools; wget --no-check-certificate https://htmlcompressor.googlecode.com/files/$(HTML_COMPRESSOR) -O $(HTML_COMPRESSOR)
|
|
else
|
|
tools/$(HTML_COMPRESSOR):
|
|
# $(Q) mkdir -p tools
|
|
# cd tools; wget https://github.com/yui/yuicompressor/releases/download/v2.4.8/$(YUI_COMPRESSOR)
|
|
# cd tools; wget https://htmlcompressor.googlecode.com/files/$(HTML_COMPRESSOR)
|
|
endif
|
|
|
|
ifeq ("$(COMPRESS_W_HTMLCOMPRESSOR)","yes")
|
|
$(BUILD_BASE)/espfs_img.o: tools/$(HTML_COMPRESSOR)
|
|
endif
|
|
|
|
$(BUILD_BASE)/espfs_img.o: html/ html/wifi/ espfs/mkespfsimage/mkespfsimage
|
|
$(Q) rm -rf html_compressed; mkdir html_compressed; mkdir html_compressed/wifi;
|
|
$(Q) cp -r html/*.ico html_compressed;
|
|
$(Q) cp -r html/*.css html_compressed;
|
|
$(Q) cp -r html/*.js html_compressed;
|
|
$(Q) cp -r html/wifi/*.png html_compressed/wifi;
|
|
$(Q) cp -r html/wifi/*.js html_compressed/wifi;
|
|
ifeq ("$(COMPRESS_W_HTMLCOMPRESSOR)","yes")
|
|
$(Q) echo "Compression assets with htmlcompressor. This may take a while..."
|
|
$(Q) java -jar tools/$(HTML_COMPRESSOR) \
|
|
-t html --remove-surrounding-spaces max --remove-quotes --remove-intertag-spaces \
|
|
-o $(abspath ./html_compressed)/ \
|
|
$(HTML_PATH)head- \
|
|
$(HTML_PATH)*.html
|
|
$(Q) java -jar tools/$(HTML_COMPRESSOR) \
|
|
-t html --remove-surrounding-spaces max --remove-quotes --remove-intertag-spaces \
|
|
-o $(abspath ./html_compressed)/wifi/ \
|
|
$(WIFI_PATH)*.html
|
|
$(Q) echo "Compression assets with yui-compressor. This may take a while..."
|
|
$(Q) for file in `find html_compressed -type f -name "*.js"`; do \
|
|
java -jar tools/$(YUI_COMPRESSOR) $$file --line-break 0 -o $$file; \
|
|
done
|
|
$(Q) for file in `find html_compressed -type f -name "*.css"`; do \
|
|
java -jar tools/$(YUI_COMPRESSOR) $$file -o $$file; \
|
|
done
|
|
else
|
|
$(Q) cp -r html/head- html_compressed;
|
|
$(Q) cp -r html/*.html html_compressed;
|
|
$(Q) cp -r html/wifi/*.html html_compressed/wifi;
|
|
endif
|
|
ifeq (,$(findstring mqtt,$(MODULES)))
|
|
$(Q) rm -rf html_compressed/mqtt.html
|
|
$(Q) rm -rf html_compressed/mqtt.js
|
|
endif
|
|
$(Q) for file in `find html_compressed -type f -name "*.htm*"`; do \
|
|
cat html_compressed/head- $$file >$${file}-; \
|
|
mv $$file- $$file; \
|
|
done
|
|
$(Q) rm html_compressed/head-
|
|
$(Q) cd html_compressed; find . \! -name \*- | ../espfs/mkespfsimage/mkespfsimage > ../build/espfs.img; cd ..;
|
|
$(Q) ls -sl build/espfs.img
|
|
$(Q) cd build; $(OBJCP) -I binary -O elf32-xtensa-le -B xtensa --rename-section .data=.espfs \
|
|
espfs.img espfs_img.o; cd ..
|
|
|
|
# edit the loader script to add the espfs section to the end of irom with a 4 byte alignment.
|
|
# we also adjust the sizes of the segments 'cause we need more irom0
|
|
build/eagle.esphttpd1.v6.ld: $(SDK_LDDIR)/eagle.app.v6.new.1024.app1.ld
|
|
$(Q) sed -e '/\.irom\.text/{' -e 'a . = ALIGN (4);' -e 'a *(.espfs)' -e '}' \
|
|
-e '/^ irom0_0_seg/ s/6B000/7C000/' \
|
|
$(SDK_LDDIR)/eagle.app.v6.new.1024.app1.ld >$@
|
|
build/eagle.esphttpd2.v6.ld: $(SDK_LDDIR)/eagle.app.v6.new.1024.app2.ld
|
|
$(Q) sed -e '/\.irom\.text/{' -e 'a . = ALIGN (4);' -e 'a *(.espfs)' -e '}' \
|
|
-e '/^ irom0_0_seg/ s/6B000/7C000/' \
|
|
$(SDK_LDDIR)/eagle.app.v6.new.1024.app2.ld >$@
|
|
|
|
espfs/mkespfsimage/mkespfsimage: espfs/mkespfsimage/
|
|
$(Q) $(MAKE) -C espfs/mkespfsimage GZIP_COMPRESSION="$(GZIP_COMPRESSION)"
|
|
|
|
release: all
|
|
$(Q) rm -rf release; mkdir -p release/esp-link-$(BRANCH)
|
|
$(Q) egrep -a 'esp-link [a-z0-9.]+ - 201' $(FW_BASE)/user1.bin | cut -b 1-80
|
|
$(Q) egrep -a 'esp-link [a-z0-9.]+ - 201' $(FW_BASE)/user2.bin | cut -b 1-80
|
|
$(Q) cp $(FW_BASE)/user1.bin $(FW_BASE)/user2.bin $(SDK_BASE)/bin/blank.bin \
|
|
"$(SDK_BASE)/bin/boot_v1.5.bin" wiflash avrflash release/esp-link-$(BRANCH)
|
|
$(Q) tar zcf esp-link-$(BRANCH).tgz -C release esp-link-$(BRANCH)
|
|
$(Q) echo "Release file: esp-link-$(BRANCH).tgz"
|
|
$(Q) rm -rf release
|
|
|
|
clean:
|
|
$(Q) rm -f $(APP_AR)
|
|
$(Q) rm -f $(TARGET_OUT)
|
|
$(Q) find $(BUILD_BASE) -type f | xargs rm -f
|
|
$(Q) make -C espfs/mkespfsimage/ clean
|
|
$(Q) rm -rf $(FW_BASE)
|
|
$(Q) rm -f webpages.espfs
|
|
ifeq ("$(COMPRESS_W_HTMLCOMPRESSOR)","yes")
|
|
$(Q) rm -rf html_compressed
|
|
endif
|
|
|
|
$(foreach bdir,$(BUILD_DIR),$(eval $(call compile-objects,$(bdir))))
|
|
|