107 Commits (fe4f565fe83f05e402cc8d8ca3ceefbc39692a1f)

Author	SHA1	Message	Date
Thorsten von Eicken	e57f29c019	remove rs485 support due to boot issues (us timer?)	7 years ago
Thorsten von Eicken	5f56a47436	fix uart init	8 years ago
Thorsten von Eicken	5d0e51f2c1	fix optiboot: it accumulated too much from failed attempts	8 years ago
dannybackx	6bdfaf933e	Query ip (#289) ... * Following tve's guidelines to submit the changes for query-ip, I think.	8 years ago
Oliver	4bb78e3ec2	Typo error in "PurgeData" constant	8 years ago
Oliver	11d8364164	Added PURGE_DATA	8 years ago
igittigitt	0ce029b16a	Local changes and compiler warning	8 years ago
Oliver	3ef8dd6820	do not wait for TX-FIFO ... Waiting for the FIFO to flush may cause watchdog resets. Now, just ensure thats FIFO is empty bevore raising BREAK. Also only handle BRK_OFF if BRK_ON was issued before.	8 years ago
Oliver	1910386729	Added support for Telnet commands to generate BREAK ... BREAK could be generated through Telnet command syntax (see RFC2217) by offering "Set BREAK state ON", "Set BREAK state OFF" and "Request BREAK state".	8 years ago
Oliver	5d27848690	Bugfix for issue #239 (setting baudrate via NVT) ... According to https://github.com/jeelabs/esp-link/issues/239 this commit fixes a bug, when setting baudrate from Telnet control commands (NVT) more than once.	8 years ago
Thorsten von Eicken	b4595eb792	fix uart settings via telnet and ajax	8 years ago
Thorsten von Eicken	dfe9875a02	telnet tweaks	8 years ago
Thorsten von Eicken	de0a093aa7	add telnet codes for serial port config	8 years ago
hetii	b3d8072bae	Add missing baudrate settings. (#216)	8 years ago
Thorsten von Eicken	3cb55b5648	fix serial LED, fixes #199	8 years ago
beegee-tokyo	0654c1d038	Synced master branch with upstream from jeelabs ... Signed-off-by: beegee-tokyo <bernd@giesecke.tk>	8 years ago
cskarai	60f47ba8bc	Refactored MCU flashing protection	8 years ago
Karai Csaba	f75c1acf95	Button feature is working	8 years ago
bitdump	c5513d063d	Adding the console uart format support (#189) ... Some of the MCU use format other than 8N1. Adding the support for other format.	8 years ago
Alastair D'Silva	e33c924e00	Apply @krzy27's changes to set up the timers correctly.	9 years ago
Thorsten von Eicken	f84ffdc989	Allow syslog to be disabled, as in #128	9 years ago
Alastair D'Silva	fc230a39ca	Fix tx_enable init logic ... save a couple of branches	9 years ago
Alastair D'Silva	352759b7c8	Ensure the TX timer is disarmed after it has fired, allowing it to be retriggered. ... Only manipulate the timer if TX_ENABLE has been requested. Assert uart_tx_enable_timer_inited once the timer has been inited.	9 years ago
Alastair D'Silva	1dcd1f7b10	Add a clarifying comment about the setup of TX empty	9 years ago
Alastair D'Silva	f4ee1dbed4	Move USE_US_TIMER to esp8266.h and remove redundant inclusions of osapi.h	9 years ago
Alastair D'Silva	19c56c80c8	Update all timer instances to microsecond timers	9 years ago
Alastair D'Silva	dbab746e3c	Add support for the TX_ENABLE signal for RS-485 trancievers	9 years ago
Thorsten von Eicken	0df5264c8b	revert PR #95 due to bug; revert #114 due to timing issues; fix MQTT crashes	9 years ago
Thorsten von Eicken	56e76c6bc4	Revert "TvEmaster" ... This reverts commit f577c140df.	9 years ago
Jason Schmidlapp	5eba5500ac	Don't reset programming target until actual image data is received from network. ... Thanks!	9 years ago
susisstrolch	e3e19ffa38	TvEmaster ... Syslog and debug printing fixes	9 years ago
Alastair D'Silva	80d9945266	Fix warnings reported in #113 (format warnings, differing types)	9 years ago
Thorsten von Eicken	5a891c3c1e	new SLIP protocol; basic REST working	9 years ago
Thorsten von Eicken	109c10c3f2	make new slip proto work	9 years ago
Thorsten von Eicken	481818429e	fix RX pull-up; revamp avr flashing	9 years ago
Thorsten von Eicken	5dbebcd841	change SLIP to std escape chars; add to readme	9 years ago
Benjamin Runnels	e39ee808c9	DOH! missing semicolon	9 years ago
Benjamin Runnels	b8567ad2ef	Updated DBG macros as suggested by susisstrolch	9 years ago
susisstrolch	9ec3a30c87	syslog - a simple syslog client	9 years ago
susisstrolch	0cb217046d	simple handler for system_os_task/system_os_post ... we wrap both functions in much easier ones (register_usr_task, post_usr_task). register_usr_task requires an os_task_t parameter (the task itself) and returns a task number (0...MAXUSRTASKS) which is later on used by "post_usr_task". register_usr_task is self-initializing. no static arrays - malloc only...	9 years ago
Benjamin Runnels	b7ae39ae8d	Moved to debug macro for SLIP_DBG and fixed an error when SLIP_DBG was defined ... Removed unnecessary stuff Switched VS project to use sdk 1.4.0 sources for intellisense	9 years ago
Thorsten von Eicken	cb75396552	extend reset for esp8266	9 years ago
Thorsten von Eicken	df8afa82d0	make programming reset pulse longer for esp8266 and add notes to readme	9 years ago
Thorsten von Eicken	e0040e74bc	refactor pin config, add support for rx pull-up	9 years ago
Thorsten von Eicken	65583e6af6	add selection of uart1 to debug log	9 years ago
Kayo Phoenix	614c646b3c	Added sending text to console from web interface.	9 years ago
Thorsten von Eicken	adb0706349	added built-in AVR/optiboot programmer	9 years ago
Thorsten von Eicken	9c11776869	switch to single firmware size	9 years ago
Thorsten von Eicken	45e6ee6957	fix serial bridge port accept printf	9 years ago
Thorsten von Eicken	0e096f0cc5	skip initial chars on uC reset	9 years ago