Update README.md

README.md

@@ -18,9 +18,22 @@ http://www.gaudi.ch/OpenTheremin/
 ### Installation
 1. Open up the Arduino IDE
 2. Open the File "Open_Theremin_V3.ino"
-3. Selecting the correct usb port on Tools -> Serial Port
+3. In "Application.cpp", take care of selecting MIDI mode that correponds to your cituation
-4. Select the correct arduino board from Tools -> Board
+
-5. Upload the code by clicking on the upload button.
+	(put "//" in front off inadequate line - MIDI through serial is selected by default here):
+
+   Serial.begin(115200); // Baudrate for midi to serial. Use a serial to midi router 
+   
+  	http://projectgus.github.com/hairless-midiserial/
+  
+   //Serial.begin(31250); // Baudrate for real midi. 
+   Use din connection https://www.arduino.cc/en/Tutorial/Midi 
+   or HIDUINO https://github.com/ddiakopoulos/hiduino
+
+   I tested "Hiduino" and "midi to serial" modes, both are OK.
+4. Selecting the correct usb port on Tools -> Serial Port
+5. Select the correct arduino board from Tools -> Board
+6. Upload the code by clicking on the upload button.
 
 ### Added and removed compare to Open Theremin V3. 
 Serial communication implemented for program monitoring purpose was removed (Particularly during calibration).
@@ -31,16 +44,7 @@ Serial port is used to send midi messages now.
 
 ### How does it works ? 
 
-In "Application.cpp", take care of selecting MIDI mode that correponds to your cituation 
-	(put "//" in front off inadequate line - MIDI through serial is selected by default here):
-
-  Serial.begin(115200); // Baudrate for midi to serial. Use a serial to midi router 
-  	http://projectgus.github.com/hairless-midiserial/
-  
-  //Serial.begin(31250); // Baudrate for real midi. Use din connection 
-  	https://www.arduino.cc/en/Tutorial/Midi or HIDUINO https://github.com/ddiakopoulos/hiduino
 
-I tested "Hiduino" and "midi to serial" modes, both are OK.