Update application.cpp

Open_Theremin_V3/application.cpp

@@ -67,6 +67,10 @@ static double rod_cc_scale = 1;
 static uint16_t data_pot_value = 0; 
 static uint16_t old_data_pot_value = 0; 
 
+static uint16_t param_pot_value = 0; 
+static uint16_t old_param_pot_value = 0; 
+
+
 Application::Application()
   : _state(PLAYING),
     _mode(NORMAL) {
@@ -816,13 +820,33 @@ void Application::init_parameters ()
 
 void Application::set_parameters ()
 {
-  uint16_t param_pot_value = 0;
+  uint16_t data_steps;
   
   param_pot_value = analogRead(REGISTER_SELECT_POT);
   data_pot_value = analogRead(WAVE_SELECT_POT);
 
-  // If data pot moved
+  // If parameter pot moved
-  if (abs((int32_t)data_pot_value - (int32_t)old_data_pot_value) >= 8)
+  if (abs((int32_t)param_pot_value - (int32_t)old_param_pot_value) >= 8)
+  {
+    // Blink the LED relatively to pot position
+    resetTimer();
+    if (((param_pot_value >> 7) % 2) == 0)
+    {
+      HW_LED1_OFF;
+      HW_LED2_OFF;
+    }
+    else
+    {
+      HW_LED1_ON;
+      HW_LED2_ON;
+    }
+
+    // Memorize data pot value to monitor changes
+    old_param_pot_value = param_pot_value;
+  }
+  
+  // Else If data pot moved
+  else if (abs((int32_t)data_pot_value - (int32_t)old_data_pot_value) >= 8)
   {
     // Modify selected parameter
     switch (param_pot_value >> 7)
@@ -833,25 +857,30 @@ void Application::set_parameters ()
       {
       case 0:
         registerValue=3; // -1 Octave
+        data_steps = 1;
         break; 
       case 1:
       case 2:
         registerValue=2; // Center
+        data_steps = 2;
         break; 
       default:
         registerValue=1; // +1 Octave 
+        data_steps = 3;
         break; 
       }
       break;
       
     case 1:
       // Waveform
-      vWavetableSelector=data_pot_value>>7;
+      data_steps = data_pot_value >> 7;
+      vWavetableSelector = data_steps;
       break;
       
     case 2:
       // Channel
-      midi_channel = (uint8_t)((data_pot_value >> 6) & 0x000F);
+      data_steps = data_pot_value >> 6;
+      midi_channel = (uint8_t)(data_steps & 0x000F);
       if (old_midi_channel != midi_channel)
       {
         // Send all note off to avoid stuck notes
@@ -862,20 +891,18 @@ void Application::set_parameters ()
         
     case 3:
       // Rod antenna mode
-      switch (data_pot_value >> 7)
+      data_steps = data_pot_value >> 8;
+      switch (data_steps)
       {
       case 0:
-      case 1:
         flag_legato_on = 0;
         flag_pitch_bend_on = 0;
         break; 
-      case 2:
+      case 1:
-      case 3:
         flag_legato_on = 0;
         flag_pitch_bend_on = 1;
         break; 
-      case 4:
+      case 2:
-      case 5:
         flag_legato_on = 1;
         flag_pitch_bend_on = 0;
         break; 
@@ -887,8 +914,9 @@ void Application::set_parameters ()
       break;
       
     case 4:
-      // Pitch bend range
+      // Pitch-Bend range
-      switch (data_pot_value >> 7)
+      data_steps = data_pot_value >> 7;
+      switch (data_steps)
       {
       case 0:
         midi_bend_range = 1; 
@@ -919,12 +947,14 @@ void Application::set_parameters ()
       
     case 5:
       // Volume trigger
+      data_steps = data_pot_value >> 8;
       midi_volume_trigger = (uint8_t)((data_pot_value >> 3) & 0x007F);
       break;
       
     case 6:
       //Rod antenna cc
-      switch (data_pot_value >> 7)
+      data_steps = data_pot_value >> 7;
+      switch (data_steps)
       {
       case 0:
         rod_midi_cc = 255; // Nothing
@@ -935,7 +965,7 @@ void Application::set_parameters ()
         rod_midi_cc = 8; // Balance
         rod_midi_cc_lo = 255; // No least significant bits
         rod_cc_scale = 1.0;
-       break; 
+        break; 
       case 2:
         rod_midi_cc = 10; // Pan
         rod_midi_cc_lo = 255; // No least significant bits
@@ -972,7 +1002,8 @@ void Application::set_parameters ()
           
     default:
       // Loop antenna cc
-      switch (data_pot_value >> 7)
+      data_steps = data_pot_value >> 7;
+      switch (data_steps)
       {
       case 0:
         loop_midi_cc = 1; // Modulation
@@ -1002,7 +1033,39 @@ void Application::set_parameters ()
       break;
     }
 
+    // Blink the LED relatively to pot position
+    resetTimer();
+    if ((data_steps % 2) == 0)
+    {
+      HW_LED1_OFF;
+      HW_LED2_OFF;
+    }
+    else
+    {
+      HW_LED1_ON;
+      HW_LED2_ON;
+    }
+
+
     // Memorize data pot value to monitor changes
     old_data_pot_value = data_pot_value;
   }
+
+  else
+  {
+    if (timerExpired(65000))
+    //restore LED status
+    {
+      if (_mode == NORMAL)
+      {
+        HW_LED1_ON;
+        HW_LED2_OFF;
+      }
+      else
+      {
+        HW_LED1_OFF;
+        HW_LED2_ON;
+      }
+    }
+  }
 }