||9 months ago|
|Open_Theremin_V3||1 year ago|
|LICENSE||7 years ago|
|MIDI Open Theremin V3 HMI.bmp||3 years ago|
|Quick guide open theremin midi.bmp||3 years ago|
|README.md||9 months ago|
Open Theremin V3 with MIDI interface control software V2.8 for Arduino UNO
(For Open Theremin V4 with MIDI, follow this link: https://github.com/MrDham/OpenTheremin_V4_with_MIDI)
Based on Arduino UNO Software for the Open.Theremin version 3.0 Copyright (C) 2010-2016 by Urs Gaudenz https://github.com/GaudiLabs/OpenTheremin_V3
This Open Theremin V3 with MIDI version V2.6 also takes into account Changes added in Open.Theremin version 3.1 (all by @Theremingenieur):
Fix a wavetable addressing issue (found by @miguelfreitas) Use the Arduino's hardware SPI to control the DACS and use the Latch signal to reduce audio jitter Improve the register switch to transpose by clean octaves and keep the tone spacing and pitch tuning consistent Improve the volume response to give a smoother start and wider dynamics (*)
(*) This relies on a recent gcc compiler version. Make sure to compile it with the Arduino IDE >= 1.8.10
Pitch Bend Range choice is also extended (Allows 4 octaves Bend)
MIDI CC from Pitch antenna (Rod) have 14 Bit resolution when applicable. Example of application: you can create a software synth controled by CC7 for volume and CC16 (MSB) - CC48 (LSB) for pitch without using Note On/Off and Pitch Bend messages.
Urs also made a very clear presentation of the MIDI feature on his website: http://www.gaudi.ch/OpenTheremin/index.php?option=com_content&view=article&id=200&Itemid=121, many thanks !
Don't click on the files!
Click on the "clone or download" Button to the right. Then unpack the archive.
Open Source Theremin based on the Arduino Platform + MIDI communication
Open.Theremin is an arduino shield to build the legendary music instrument invented by Leon Theremin back in 1920. The theremin is played with two antennas, one to control the pitch and one for volume. The electronic shield with two ports to connect those antennas comprises two heterodyne oscillators to measure the distance of the hand to the antenna when playing the instrument. The resulting signal is fed into the arduino. After linearization and filtering the arduino generates the instruments sound that is then played through a high quality digital analog audio converter on the board. The characteristics of the sound can be determined by a wave table on the arduino.
For more info on the open source project and on availability of ready made shield see:
This githup repository provides the code to add a MIDI interface to the Open Theremin V3 so as you can connect it to your favourite synthesizer.
Open up the Arduino IDE
Open the File "Open_Theremin_V3.ino"
Important Step ! In "Application.cpp", take care of selecting MIDI mode that correponds to your cituation (put "//" in front off inadequate line - MIDI through serial is selected by default here):
Serial.begin(115200); // Baudrate for midi to serial. Use a serial to midi router https://github.com/projectgus/hairless-midiserial
I tested "Hiduino" and "MIDI to serial" modes, both are OK.
Selecting the correct usb port on Tools -> Serial Port
Select the correct arduino board from Tools -> Board
Upload the code by clicking on the upload button.
Added and removed compare to Open Theremin V3.
Serial communication implemented for program monitoring purpose was removed (Particularly during calibration). If you need to monitor calibration for antenna problem fixing, please use original master branch from https://github.com/GaudiLabs/OpenTheremin_V3.
Serial port is used to send MIDI messages now.
How does it work ?
The MIDI open theremin generates NOTE ON/OFF messages and Continuous Controler changes (MIDI CC) depending on settings and hands' position next to antennas.
It is possible to affect independant MIDI CCs to the PITCH ANTENNA (ROD) and to the VOLUME ANTENNA (LOOP).
In MIDI standard NOTE ON/OFF messages have a NOTE NUMBER and a VELOCITY.
Let's consider a Fade-in / Picth Variation / Fade-out sequence (I use right handed convention):
When left hand moves away from VOLUME ANTENNA (LOOP) and volume crosses a settable threshold (Volume trigger), a NOTE ON is generated. VELOCITY depends on how fast left hand is moving. Right hand's position next to PITCH ANTENNA (ROD) determines the starting NOTE NUMBER.
When right hand moves next to PITCH ANTENNA (ROD), PITCH BEND messages are generated (if activated) to reach exact pitch as long as pitch bend range will do. Beyond, a new NOTE ON followed by a NOTE OFF for the previous note are generated if legato mode is activated. Pitch bend range can be configured (1, 2, 4, 5, 7, 12, 24 or 48 semitones) to align with synth's maximum capabilities.
When left hand moves close to VOLUME ANTENNA (LOOP) and volume goes under Volume trigger threshold, a NOTE OFF is generated to mute the playing note.
"Register" pot becomes "Selected Parameter" pot and have 8 positions. "Timbre" pot becomes "Parameter's Value" and have a variable number of positions depending on selected parameter:
Register: 3 positions (-1 Octave, center, +1 Octave) as in original Open Theremin V3 (version V3.1)
Timbre: 8 positions as in original Open Theremin V3
Channel: 16 positions (channel 1 to 16)
Rod antenna mode: 4 positions (Legato off/Pitch Bend off, Legato off/Pitch Bend on, Legato on/Pitch Bend off, Legato on/Pitch Bend on)
Pitch bend range: 8 positions (1, 2, 4, 5, 7, 12, 24, 48 Semitones). For classical glissando and in order to have same note on audio and MIDI, use exactly same pitch bend range on your synth. Maximum setting possible is recomended.
Volume trigger / Velocity sensitivity (how fast moves the volume loop's hand): 128 positions (0 to 127)
Rod antenna MIDI CC: 8 positions (None, 8-Balance, 10-Pan, 16-MSB/48-LSB-GeneralPurpose-1, 17-MSB/49-LSB-GeneralPurpose-2, 18-GeneralPurpose-3, 19-GeneralPurpose-4, 74-cutoff)
For 14 Bit CC messages, MSB and LSB are always sent together and in the following order: MSB (1st), LSB (2nd) as per MIDI 1.0 Standard. The receiver can bufferize MSB to synchronize it with the LSB.
Loop antenna MIDI CC: 8 positions (1-Modulation, 7-Volume, 11-Expression, 71-Resonnance, 74-Cutoff, 91-Reverb, 93-Chorus, 95-Phaser)
Select a Parameter and move "Parameter's Value" to change corresponding setting.
While you rotate the pots, both LEDs toggles (OFF/ON) every steps to give you some angular feedback before going back to PLAY/MUTE Status.
The picture at https://github.com/MrDham/OpenTheremin_V3_with_MIDI/blob/master/MIDI%20Open%20Theremin%20V3%20HMI.bmp gives an example of possible HMI: on "Value" pot, red lines have 4 positions, grey lines have 5 positions and yellow lines have 8 positions. On "Parameter" pot you see coloured lines indicating which colour to follow for the "Value" pot.
The Quick Guide at https://github.com/MrDham/OpenTheremin_V3_with_MIDI/blob/master/Quick%20guide%20open%20theremin%20midi.bmp works well with this HMI. Print it on a portrait A4 sheet of paper, plastify it and take it with your theremin everywhere you go...
The volume trigger can be configured so as we have some volume at note attack on percussive sounds. The volume trigger setting is also used to set sensitivity for velocity (how fast left hand is moving when note is triggered). Volume trigger = 127 (Maximum) won't generate any NOTE ON. It can be used to generate MIDI CC only.
Manipulation of "Rod antenna MIDI CC" and "Loop antenna MIDI CC" is not error proof. MIDI newbies should be advised to change their value in MUTE mode.
Default configuration is: Register = Center, Timbre = 1st Waveform, Channel = MIDI Channel 1, Rod antenna mode = Legato on/Pitch Bend on, Pitch bend range = 2 Semitones, Volume trigger = 0, Rod antenna MIDI CC = None, Loop antenna MIDI CC = 7-Volume.
Sends ALL NOTE OFF on selected channel and stay in mute until it is pushed again.
Audio processing from antennas to output jack, including volume and pitch pots, LEDs and button functions, is exactly the same as in open theremin V3. You can play the Audio and the MIDI side by side.
This device runs normal calibration of antennas after pushing button for 3 seconds as per initial project
What can I do to get a theremin like glissando?
Activate picth bend and set pitch bend range of the theremin with a high value (12 semitones or 24 semitones). Set pitch bend range of the synth with the same value.
If I do not trigger with the volume hand it also seems to trigger a new tone with the pitch antenna. Guess this is how MIDI works.
When legato mode is activated, if you trigger a note (with volume loop) and go in one direction (with pitch antenna) a new note will be triggered at the limit of pitch bend range.
Legato mode is used as a workaround for limitation of Pitch Bend range on some synths (e.g. max 12 semitones pitch bend).
With Legato Mode = ON and Pitch Bend Mode = OFF, the notes generated don't seem to be in a given scale. For example I can't play in C major if I select Pitch Bend Range = 2.
Effectively, according to the sequence described above (Fade-in / Picth Variation / Fade-out), the first note played influences the next notes played: they will always be distant of N * Pitch Bend Range. For example, with Pitch Bend Range = 2, if you start with a C and move the right hand, you can only play C, D, E, F#, G#, A#. This is as designed.
If you want to play in a given scale you need to set Legato Mode = ON, Pitch Bend Mode = OFF, Pitch Bend Range = 1 and to use a synth with a "force to scale" capacity. Then select the expected scale and play. Out of scale notes will be replaced by the closest one in the scale.
What is the problem if MIDI messages appear to be messy and inconsistent resulting in strange note played, strange synth parameter changes, ... ?
Most probable cause is that incorrect Baudrate was selected (see "Installation" step 3 )
Tweakable parameters (in application.cpp):
Changing this to your taste may require some test and trial.
"#define VELOCITY_SENS 9" -> How easy it is to reach highest velocity (127). Something betwen 5 and 12.
"#define PLAYER_ACCURACY 0.2" -> Pitch accuracy of player. Tolerance on note center for changing notes when playing legato. From 0 (very accurate players) to 0.5 (may generate note toggling).
NEED SUPPORT ?
Please log bugs, requests and questions at https://github.com/MrDham/OpenTheremin_V3_with_MIDI/issues
Any questions about MIDI and theremins ?
The answer is probably there: https://app.box.com/s/s3yx1ro1v8ay061626wy09vmbo7do23q
Original project, Open Theremin, was written by Urs Gaudenz, GaudiLabs, in 2016 GNU license. This Project inherits this 2016 GNU License.
Check LICENSE file for more information
All text above must be included in any redistribution