You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
486 lines
20 KiB
486 lines
20 KiB
/*
|
|
control_tlv320aic3206
|
|
|
|
Created: Brendan Flynn (http://www.flexvoltbiosensor.com/) for Tympan, Jan-Feb 2017
|
|
Purpose: Control module for Texas Instruments TLV320AIC3206 compatible with Teensy Audio Library
|
|
|
|
License: MIT License. Use at your own risk.
|
|
*/
|
|
|
|
#include "control_tlv320aic3206.h"
|
|
#include <Wire.h>
|
|
|
|
//******************************** Constants *******************************//
|
|
|
|
#define AIC3206_I2C_ADDR 0x18
|
|
|
|
|
|
#ifndef AIC_FS
|
|
# define AIC_FS 44100UL
|
|
#endif
|
|
|
|
#define AIC_BITS 16
|
|
|
|
#define AIC_I2S_SLAVE 1
|
|
#if AIC_I2S_SLAVE
|
|
// Direction of BCLK and WCLK (reg 27) is input if a slave:
|
|
# define AIC_CLK_DIR 0
|
|
#else
|
|
// If master, make outputs:
|
|
# define AIC_CLK_DIR 0x0C
|
|
#endif
|
|
|
|
//#ifndef AIC_CODEC_CLKIN_BCLK
|
|
//# define AIC_CODEC_CLKIN_BCLK 0
|
|
//#endif
|
|
|
|
//**************************** Clock Setup **********************************//
|
|
|
|
//********************************** 44100 *********************************//
|
|
#if AIC_FS == 44100
|
|
|
|
// MCLK = 180000000 * 16 / 255 = 11.294117 MHz // FROM TEENSY, FIXED
|
|
|
|
// PLL setup. PLL_OUT = MCLK * R * J.D / P
|
|
//// J.D = 7.5264, P = 1, R = 1 => 90.32 MHz // FROM 12MHz CHA AND WHF //
|
|
// J.D = 7.9968, P = 1, R = 1 => 90.3168 MHz // For 44.1kHz exact
|
|
// J.D = 8.0000000002, P = 1, R = 1 => 9.35294117888MHz // for TEENSY 44.11764706kHz
|
|
#define PLL_J 8
|
|
#define PLL_D 0
|
|
|
|
// Bitclock divisor.
|
|
// BCLK = DAC_CLK/N = PLL_OUT/NDAC/N = 32*fs or 16*fs
|
|
// PLL_OUT = fs*NDAC*MDAC*DOSR
|
|
// BLCK = 32*fs = 1411200 = PLL
|
|
#if AIC_BITS == 16
|
|
#define BCLK_N 8
|
|
#elif AIC_BITS == 32
|
|
#define BCLK_N 4
|
|
#endif
|
|
|
|
// ADC/DAC FS setup.
|
|
// ADC_MOD_CLK = CODEC_CLKIN / (NADC * MADC)
|
|
// DAC_MOD_CLK = CODEC_CLKIN / (NDAC * MDAC)
|
|
// ADC_FS = PLL_OUT / (NADC*MADC*AOSR)
|
|
// DAC_FS = PLL_OUT / (NDAC*MDAC*DOSR)
|
|
// FS = 90.3168MHz / (8*2*128) = 44100 Hz.
|
|
// MOD = 90.3168MHz / (8*2) = 5644800 Hz
|
|
|
|
// Actual from Teensy: 44117.64706Hz * 128 => 5647058.82368Hz * 8*2 => 90352941.17888Hz
|
|
|
|
// DAC clock config.
|
|
// Note: MDAC*DOSR/32 >= RC, where RC is 8 for the default filter.
|
|
// See Table 2-21
|
|
// http://www.ti.com/lit/an/slaa463b/slaa463b.pdf
|
|
// PB1 - RC = 8. Use M8, N2
|
|
// PB25 - RC = 12. Use M8, N2
|
|
|
|
#define DOSR 128
|
|
#define NDAC 2
|
|
#define MDAC 8
|
|
|
|
#define AOSR 128
|
|
#define NADC 2
|
|
#define MADC 8
|
|
|
|
// Signal Processing Modes, Playback and Recording.
|
|
#define PRB_P 1
|
|
#define PRB_R 1
|
|
|
|
#endif // end fs if block
|
|
|
|
//**************************** Chip Setup **********************************//
|
|
|
|
//******************* INPUT DEFINITIONS *****************************//
|
|
// MIC routing registers
|
|
#define TYMPAN_MICPGA_LEFT_POSITIVE_REG 0x0134 // page 1 register 52
|
|
#define TYMPAN_MICPGA_LEFT_NEGATIVE_REG 0x0136 // page 1 register 54
|
|
#define TYMPAN_MICPGA_RIGHT_POSITIVE_REG 0x0137 // page 1 register 55
|
|
#define TYMPAN_MICPGA_RIGHT_NEGATIVE_REG 0x0139 // page 1 register 57
|
|
|
|
#define TYMPAN_MIC_ROUTING_POSITIVE_IN1 0b11000000 //
|
|
#define TYMPAN_MIC_ROUTING_POSITIVE_IN2 0b00110000 //
|
|
#define TYMPAN_MIC_ROUTING_POSITIVE_IN3 0b00001100 //
|
|
#define TYMPAN_MIC_ROUTING_POSITIVE_REVERSE 0b00000011 //
|
|
|
|
#define TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM1L 0b11000000 //
|
|
#define TYMPAN_MIC_ROUTING_NEGATIVE_IN2_REVERSE 0b00110000 //
|
|
#define TYMPAN_MIC_ROUTING_NEGATIVE_IN3_REVERSE 0b00001100 //
|
|
#define TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM2L 0b00000011 //
|
|
|
|
#define TYMPAN_MIC_ROUTING_RESISTANCE_10k 0b01010101
|
|
#define TYMPAN_MIC_ROUTING_RESISTANCE_20k 0b10101010
|
|
#define TYMPAN_MIC_ROUTING_RESISTANCE_40k 0b11111111
|
|
#define TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT TYMPAN_MIC_ROUTING_RESISTANCE_10k
|
|
|
|
#define TYMPAN_MICPGA_LEFT_VOLUME_REG 0x013B // page 1 register 59 // 0 to 47.5dB in 0.5dB steps
|
|
#define TYMPAN_MICPGA_RIGHT_VOLUME_REG 0x013C // page 1 register 60 // 0 to 47.5dB in 0.5dB steps
|
|
|
|
#define TYMPAN_MICPGA_VOLUME_ENABLE 0x00 // default is 0b11000000 - clear to 0 to enable
|
|
|
|
#define TYMPAN_MIC_BIAS_REG 0x0133 // page 1 reg 51
|
|
#define TYMPAN_MIC_BIAS_POWER_ON 0x40
|
|
#define TYMPAN_MIC_BIAS_POWER_OFF 0x00
|
|
#define TYMPAN_MIC_BIAS_OUTPUT_VOLTAGE_1_25 0x00
|
|
#define TYMPAN_MIC_BIAS_OUTPUT_VOLTAGE_1_7 0x01
|
|
#define TYMPAN_MIC_BIAS_OUTPUT_VOLTAGE_2_5 0x10
|
|
#define TYMPAN_MIC_BIAS_OUTPUT_VOLTAGE_VSUPPLY 0x11
|
|
|
|
#define TYMPAN_ADC_PROCESSING_BLOCK_REG 0x003d // page 0 register 61
|
|
|
|
#define TYMPAN_ADC_CHANNEL_POWER_REG 0x0051 // page 0 register81
|
|
#define TYMPAN_ADC_CHANNELS_ON 0b11000000 // power up left and right
|
|
|
|
#define TYMPAN_ADC_MUTE_REG 0x0052 // page 0, register 82
|
|
#define TYMPAN_ADC_UNMUTE 0x00
|
|
|
|
bool AudioControlTLV320AIC3206::enable(void)
|
|
{
|
|
delay(100);
|
|
|
|
// Setup for Master mode, pins 18/19, external pullups, 400kHz, 200ms default timeout
|
|
Wire.begin();
|
|
delay(5);
|
|
|
|
aic_reset(); delay(100);
|
|
aic_init(); delay(100);
|
|
aic_initADC(); delay(100);
|
|
aic_initDAC(); delay(100);
|
|
|
|
aic_readPage(0, 27); // check a specific register - a register read test
|
|
|
|
Serial.println("TLV320 enable done");
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
bool AudioControlTLV320AIC3206::disable(void) {
|
|
return true;
|
|
}
|
|
|
|
//dummy function to keep compatible with Teensy Audio Library
|
|
bool AudioControlTLV320AIC3206::inputLevel(float volume) {
|
|
return false;
|
|
}
|
|
|
|
bool AudioControlTLV320AIC3206::inputSelect(int n) {
|
|
if (n == TYMPAN_INPUT_LINE_IN) {
|
|
// USE LINE IN SOLDER PADS
|
|
aic_writeAddress(TYMPAN_MICPGA_LEFT_POSITIVE_REG, TYMPAN_MIC_ROUTING_POSITIVE_IN1 & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_LEFT_NEGATIVE_REG, TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM1L & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_RIGHT_POSITIVE_REG, TYMPAN_MIC_ROUTING_POSITIVE_IN1 & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_RIGHT_NEGATIVE_REG, TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM1L & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
// BIAS OFF
|
|
setMicBias(TYMPAN_MIC_BIAS_OFF);
|
|
|
|
Serial.println("Set Audio Input to Line In");
|
|
return true;
|
|
} else if (n == TYMPAN_INPUT_JACK_AS_MIC) {
|
|
// mic-jack = IN3
|
|
aic_writeAddress(TYMPAN_MICPGA_LEFT_POSITIVE_REG, TYMPAN_MIC_ROUTING_POSITIVE_IN3 & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_LEFT_NEGATIVE_REG, TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM1L & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_RIGHT_POSITIVE_REG, TYMPAN_MIC_ROUTING_POSITIVE_IN3 & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_RIGHT_NEGATIVE_REG, TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM1L & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
// BIAS on, using default
|
|
setMicBias(TYMPAN_DEFAULT_MIC_BIAS);
|
|
|
|
Serial.println("Set Audio Input to JACK AS MIC, BIAS SET TO DEFAULT 2.5V");
|
|
return true;
|
|
} else if (n == TYMPAN_INPUT_JACK_AS_LINEIN) {
|
|
// 1
|
|
// mic-jack = IN3
|
|
aic_writeAddress(TYMPAN_MICPGA_LEFT_POSITIVE_REG, TYMPAN_MIC_ROUTING_POSITIVE_IN3 & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_LEFT_NEGATIVE_REG, TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM1L & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_RIGHT_POSITIVE_REG, TYMPAN_MIC_ROUTING_POSITIVE_IN3 & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_RIGHT_NEGATIVE_REG, TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM1L & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
// BIAS Off
|
|
setMicBias(TYMPAN_MIC_BIAS_OFF);
|
|
|
|
Serial.println("Set Audio Input to JACK AS LINEIN, BIAS OFF");
|
|
return true;
|
|
} else if (n == TYMPAN_INPUT_ON_BOARD_MIC) {
|
|
// on-board = IN2
|
|
aic_writeAddress(TYMPAN_MICPGA_LEFT_POSITIVE_REG, TYMPAN_MIC_ROUTING_POSITIVE_IN2 & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_LEFT_NEGATIVE_REG, TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM1L & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_RIGHT_POSITIVE_REG, TYMPAN_MIC_ROUTING_POSITIVE_IN2 & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_RIGHT_NEGATIVE_REG, TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM1L & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
// BIAS Off
|
|
setMicBias(TYMPAN_MIC_BIAS_OFF);
|
|
Serial.println("Set Audio Input to Tympan On-Board MIC, BIAS OFF");
|
|
|
|
return true;
|
|
}
|
|
Serial.print("ERROR: Unable to Select Input - Value not supported: ");
|
|
Serial.println(n);
|
|
return false;
|
|
}
|
|
|
|
bool AudioControlTLV320AIC3206::setMicBias(int n) {
|
|
if (n == TYMPAN_MIC_BIAS_1_25) {
|
|
aic_writeAddress(TYMPAN_MIC_BIAS_REG, TYMPAN_MIC_BIAS_POWER_ON | TYMPAN_MIC_BIAS_OUTPUT_VOLTAGE_1_25); // power up mic bias
|
|
return true;
|
|
} else if (n == TYMPAN_MIC_BIAS_1_7) {
|
|
aic_writeAddress(TYMPAN_MIC_BIAS_REG, TYMPAN_MIC_BIAS_POWER_ON | TYMPAN_MIC_BIAS_OUTPUT_VOLTAGE_1_7); // power up mic bias
|
|
return true;
|
|
} else if (n == TYMPAN_MIC_BIAS_2_5) {
|
|
aic_writeAddress(TYMPAN_MIC_BIAS_REG, TYMPAN_MIC_BIAS_POWER_ON | TYMPAN_MIC_BIAS_OUTPUT_VOLTAGE_2_5); // power up mic bias
|
|
return true;
|
|
} else if (n == TYMPAN_MIC_BIAS_VSUPPLY) {
|
|
aic_writeAddress(TYMPAN_MIC_BIAS_REG, TYMPAN_MIC_BIAS_POWER_ON | TYMPAN_MIC_BIAS_OUTPUT_VOLTAGE_VSUPPLY); // power up mic bias
|
|
return true;
|
|
} else if (n == TYMPAN_MIC_BIAS_OFF) {
|
|
aic_writeAddress(TYMPAN_MIC_BIAS_REG, TYMPAN_MIC_BIAS_POWER_OFF); // power up mic bias
|
|
return true;
|
|
}
|
|
Serial.print("ERROR: Unable to set MIC BIAS - Value not supported: ");
|
|
Serial.println(n);
|
|
return false;
|
|
}
|
|
|
|
void AudioControlTLV320AIC3206::aic_reset() {
|
|
Serial.println("INFO: Reseting AIC");
|
|
aic_writePage(0x00, 0x01, 0x01);
|
|
// aic_writeAddress(0x0001, 0x01);
|
|
|
|
delay(10);
|
|
}
|
|
|
|
|
|
// example - turn on IN3 - mic jack, with negatives routed to CM1L and with 10k resistance
|
|
// aic_writeAddress(TYMPAN_LEFT_MICPGA_POSITIVE_REG, TYMPAN_MIC_ROUTING_POSITIVE_IN3 & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
// aic_writeAddress(TYMPAN_LEFT_MICPGA_NEGATIVE_REG, TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM1L & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
// aic_writeAddress(TYMPAN_RIGHT_MICPGA_POSITIVE_REG, TYMPAN_MIC_ROUTING_POSITIVE_IN3 & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
// aic_writeAddress(TYMPAN_RIGHT_MICPGA_NEGATIVE_REG, TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM1L & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
|
|
void AudioControlTLV320AIC3206::aic_initADC() {
|
|
Serial.println("INFO: Initializing AIC ADC");
|
|
aic_writeAddress(TYMPAN_ADC_PROCESSING_BLOCK_REG, PRB_R); // processing blocks - ADC
|
|
aic_writePage(1, 61, 0); // 0x3D // Select ADC PTM_R4 Power Tune?
|
|
aic_writePage(1, 71, 0b00110001); // 0x47 // Set MicPGA startup delay to 3.1ms
|
|
aic_writeAddress(TYMPAN_MIC_BIAS_REG, TYMPAN_MIC_BIAS_POWER_ON | TYMPAN_MIC_BIAS_2_5); // power up mic bias
|
|
|
|
aic_writeAddress(TYMPAN_MICPGA_LEFT_POSITIVE_REG, TYMPAN_MIC_ROUTING_POSITIVE_IN2 & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_LEFT_NEGATIVE_REG, TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM1L & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_RIGHT_POSITIVE_REG, TYMPAN_MIC_ROUTING_POSITIVE_IN2 & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
aic_writeAddress(TYMPAN_MICPGA_RIGHT_NEGATIVE_REG, TYMPAN_MIC_ROUTING_NEGATIVE_CM_TO_CM1L & TYMPAN_MIC_ROUTING_RESISTANCE_DEFAULT);
|
|
|
|
aic_writeAddress(TYMPAN_MICPGA_LEFT_VOLUME_REG, TYMPAN_MICPGA_VOLUME_ENABLE); // enable Left MicPGA, set gain to 0 dB
|
|
aic_writeAddress(TYMPAN_MICPGA_RIGHT_VOLUME_REG, TYMPAN_MICPGA_VOLUME_ENABLE); // enable Right MicPGA, set gain to 0 dB
|
|
|
|
aic_writeAddress(TYMPAN_ADC_MUTE_REG, TYMPAN_ADC_UNMUTE); // Unmute Left and Right ADC Digital Volume Control
|
|
aic_writeAddress(TYMPAN_ADC_CHANNEL_POWER_REG, TYMPAN_ADC_CHANNELS_ON); // Unmute Left and Right ADC Digital Volume Control
|
|
}
|
|
|
|
// set MICPGA volume, 0-47.5dB in 0.5dB setps
|
|
bool AudioControlTLV320AIC3206::setInputGain_dB(float volume) {
|
|
if (volume < 0.0) {
|
|
volume = 0.0; // 0.0 dB
|
|
Serial.println("WARNING: Attempting to set MIC volume outside range");
|
|
}
|
|
if (volume > 47.5) {
|
|
volume = 47.5; // 47.5 dB
|
|
Serial.println("WARNING: Attempting to set MIC volume outside range");
|
|
}
|
|
|
|
Serial.print("INFO: Setting MIC volume to ");
|
|
Serial.print(volume, 1);
|
|
|
|
volume = volume * 2.0; // convert to value map (0.5 dB steps)
|
|
int8_t volume_int = (int8_t) (round(volume)); // round
|
|
|
|
Serial.print(". Converted to volume map => ");
|
|
Serial.println(volume_int);
|
|
|
|
aic_writeAddress(TYMPAN_MICPGA_LEFT_VOLUME_REG, TYMPAN_MICPGA_VOLUME_ENABLE | volume_int); // enable Left MicPGA, set gain to 0 dB
|
|
aic_writeAddress(TYMPAN_MICPGA_RIGHT_VOLUME_REG, TYMPAN_MICPGA_VOLUME_ENABLE | volume_int); // enable Right MicPGA, set gain to 0 dB
|
|
return true;
|
|
}
|
|
|
|
//******************* OUTPUT DEFINITIONS *****************************//
|
|
#define TYMPAN_DAC_PROCESSING_BLOCK_REG 0x003c // page 0 register 60
|
|
#define TYMPAN_DAC_VOLUME_LEFT_REG 0x0041 // page 0 reg 65
|
|
#define TYMPAN_DAC_VOLUME_RIGHT_REG 0x0042 // page 0 reg 66
|
|
|
|
|
|
//volume control, similar to Teensy Audio Board
|
|
// value between 0.0 and 1.0. Set to span -58 to +15 dB
|
|
bool AudioControlTLV320AIC3206::volume(float volume) {
|
|
volume = max(0.0, min(1.0, volume));
|
|
float vol_dB = -58.f + (15.0 - (-58.0f)) * volume;
|
|
volume_dB(vol_dB);
|
|
return true;
|
|
}
|
|
|
|
// -63.6 to +24 dB in 0.5dB steps. uses signed 8-bit
|
|
bool AudioControlTLV320AIC3206::volume_dB(float volume) {
|
|
|
|
// Constrain to limits
|
|
if (volume > 24.0) {
|
|
volume = 24.0;
|
|
Serial.println("WARNING: Attempting to set DAC Volume outside range");
|
|
}
|
|
if (volume < -63.5) {
|
|
volume = -63.5;
|
|
Serial.println("WARNING: Attempting to set DAC Volume outside range");
|
|
}
|
|
|
|
Serial.print("INFO: Setting DAC volume to ");
|
|
Serial.print(volume, 1);
|
|
|
|
volume = volume * 2.0; // convert to value map (0.5 dB steps)
|
|
int8_t volume_int = (int8_t) (round(volume)); // round
|
|
|
|
Serial.print(". Converted to volume map => ");
|
|
Serial.println(volume_int);
|
|
|
|
aic_writeAddress(TYMPAN_DAC_VOLUME_RIGHT_REG, volume_int);
|
|
aic_writeAddress(TYMPAN_DAC_VOLUME_LEFT_REG, volume_int);
|
|
return true;
|
|
}
|
|
|
|
void AudioControlTLV320AIC3206::aic_initDAC() {
|
|
Serial.println("INFO: Initializing AIC DAC");
|
|
// PLAYBACK SETUP
|
|
|
|
aic_writeAddress(TYMPAN_DAC_PROCESSING_BLOCK_REG, PRB_P); // processing blocks - DAC
|
|
|
|
//aic_writePage(1, 20, 0x25); // 0x14 De-Pop
|
|
aic_writePage(1, 12, 8); // route LDAC/RDAC to HPL/HPR
|
|
aic_writePage(1, 13, 8); // route LDAC/RDAC to HPL/HPR
|
|
aic_writePage(0, 63, 0xD6); // 0x3F // Power up LDAC/RDAC
|
|
// aic_writePage(1, 14, 8); // route LDAC/RDAC to LOL/LOR
|
|
// aic_writePage(1, 15, 8); // route LDAC/RDAC to LOL/LOR
|
|
aic_writePage(1, 16, 0); // unmute HPL Driver, 0 gain
|
|
aic_writePage(1, 17, 0); // unmute HPR Driver, 0 gain
|
|
// aic_writePage(1, 18, 0); // unmute LOL Driver, 0 gain
|
|
// aic_writePage(1, 19, 0); // unmute LOR Driver, 0 gain
|
|
aic_writePage(1, 9, 0x30); // Power up HPL/HPR and LOL/LOR drivers
|
|
delay(100);
|
|
aic_writeAddress(TYMPAN_DAC_VOLUME_LEFT_REG, 0); // default to 0 dB
|
|
aic_writeAddress(TYMPAN_DAC_VOLUME_RIGHT_REG, 0); // default to 0 dB
|
|
aic_writePage(0, 64, 0); // 0x40 // Unmute LDAC/RDAC
|
|
}
|
|
|
|
void AudioControlTLV320AIC3206::aic_init() {
|
|
Serial.println("INFO: Initializing AIC");
|
|
|
|
// PLL
|
|
aic_writePage(0, 4, 3); // 0x04 low PLL clock range, MCLK is PLL input, PLL_OUT is CODEC_CLKIN
|
|
aic_writePage(0, 5, (PLL_J != 0 ? 0x91 : 0x11));
|
|
aic_writePage(0, 6, PLL_J);
|
|
aic_writePage(0, 7, PLL_D >> 8);
|
|
aic_writePage(0, 8, PLL_D &0xFF);
|
|
|
|
// CLOCKS
|
|
aic_writePage(0, 11, 0x80 | NDAC); // 0x0B
|
|
aic_writePage(0, 12, 0x80 | MDAC); // 0x0C
|
|
aic_writePage(0, 13, 0); // 0x0D
|
|
aic_writePage(0, 14, DOSR); // 0x0E
|
|
// aic_writePage(0, 18, 0); // 0x12 // powered down, ADC_CLK same as DAC_CLK
|
|
// aic_writePage(0, 19, 0); // 0x13 // powered down, ADC_MOD_CLK same as DAC_MOD_CLK
|
|
aic_writePage(0, 18, 0x80 | NADC); // 0x12
|
|
aic_writePage(0, 19, 0x80 | MADC); // 0x13
|
|
aic_writePage(0, 20, AOSR);
|
|
aic_writePage(0, 30, 0x80 | BCLK_N); // power up BLCK N Divider, default is 128
|
|
|
|
// POWER
|
|
aic_writePage(1, 1, 8); // 0x01
|
|
aic_writePage(1, 2, 0); // 0x02 Enable Master Analog Power Control
|
|
aic_writePage(1, 10, 0); // common mode 0.9 for full chip, HP, LO // from WHF/CHA
|
|
aic_writePage(1, 71, 0x31); // 0x47 Set input power-up time to 3.1ms (for ADC)
|
|
aic_writePage(1, 123, 1); // 0x7B Set reference to power up in 40ms when analog blocks are powered up
|
|
//aic_writePage(1, 124, 6); // 0x7D Charge Pump
|
|
aic_writePage(1, 125, 0x53); // Enable ground-centered mode, DC offset correction // from WHF/CHA
|
|
|
|
// !!!!!!!!! The below writes are from WHF/CHA - probably don't need?
|
|
// aic_writePage(1, 1, 10); // 0x01 // Charge pump
|
|
aic_writePage(0, 27, 0x01 | AIC_CLK_DIR | (AIC_BITS == 32 ? 0x30 : 0)); // 0x1B
|
|
// aic_writePage(0, 28, 0); // 0x1C
|
|
}
|
|
|
|
unsigned int AudioControlTLV320AIC3206::aic_readPage(uint8_t page, uint8_t reg)
|
|
{
|
|
unsigned int val;
|
|
if (aic_goToPage(page)) {
|
|
Wire.beginTransmission(AIC3206_I2C_ADDR);
|
|
Wire.write(reg);
|
|
unsigned int result = Wire.endTransmission();
|
|
if (result != 0) {
|
|
Serial.print("ERROR: Read Page. Page: ");Serial.print(page);
|
|
Serial.print(" Reg: ");Serial.print(reg);
|
|
Serial.print(". Received Error During Read Page: ");
|
|
Serial.println(result);
|
|
val = 300 + result;
|
|
return val;
|
|
}
|
|
if (Wire.requestFrom(AIC3206_I2C_ADDR, 1) < 1) {
|
|
Serial.print("ERROR: Read Page. Page: ");Serial.print(page);
|
|
Serial.print(" Reg: ");Serial.print(reg);
|
|
Serial.println(". Nothing to return");
|
|
val = 400;
|
|
return val;
|
|
}
|
|
if (Wire.available() >= 1) {
|
|
uint16_t val = Wire.read();
|
|
Serial.print("INFO: Read Page. Page: ");Serial.print(page);
|
|
Serial.print(" Reg: ");Serial.print(reg);
|
|
Serial.print(". Received: ");
|
|
Serial.println(val, HEX);
|
|
return val;
|
|
}
|
|
} else {
|
|
Serial.print("INFO: Read Page. Page: ");Serial.print(page);
|
|
Serial.print(" Reg: ");Serial.print(reg);
|
|
Serial.println(". Failed to go to read page. Could not go there");
|
|
val = 500;
|
|
return val;
|
|
}
|
|
val = 600;
|
|
return val;
|
|
}
|
|
|
|
bool AudioControlTLV320AIC3206::aic_writeAddress(uint16_t address, uint8_t val) {
|
|
uint8_t reg = (uint8_t) (address & 0xFF);
|
|
uint8_t page = (uint8_t) ((address >> 8) & 0xFF);
|
|
|
|
return aic_writePage(page, reg, val);
|
|
}
|
|
|
|
bool AudioControlTLV320AIC3206::aic_writePage(uint8_t page, uint8_t reg, uint8_t val) {
|
|
Serial.print("INFO: Write Page. Page: ");Serial.print(page);
|
|
Serial.print(" Reg: ");Serial.print(reg);
|
|
Serial.print(" Val: ");Serial.println(val);
|
|
if (aic_goToPage(page)) {
|
|
Wire.beginTransmission(AIC3206_I2C_ADDR);
|
|
Wire.write(reg);delay(10);
|
|
Wire.write(val);delay(10);
|
|
uint8_t result = Wire.endTransmission();
|
|
if (result == 0) return true;
|
|
else {
|
|
Serial.print("ERROR: Received Error During Write Page: ");
|
|
Serial.println(result);
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool AudioControlTLV320AIC3206::aic_goToPage(byte page) {
|
|
Wire.beginTransmission(AIC3206_I2C_ADDR);
|
|
Wire.write(0x00); delay(10);// page register
|
|
Wire.write(page); delay(10);// go to page
|
|
byte result = Wire.endTransmission();
|
|
if (result != 0) {
|
|
Serial.print("ERROR: Received Error During GoTo Page: ");
|
|
Serial.println(result);
|
|
if (result == 2) {
|
|
// failed to transmit address
|
|
//return aic_goToPage(page);
|
|
} else if (result == 3) {
|
|
// failed to transmit data
|
|
//return aic_goToPage(page);
|
|
}
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|