You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
OpenAudio_ArduinoLibrary/radioCWModulator_F32.cpp

207 lines
6.5 KiB

/*
* radioCWModulator_F32.cpp
*
* Created: Bob larkin W7PUA March 2023
*
* License: MIT License. Use at your own risk.
*/
#include "radioCWModulator_F32.h"
#include "sinTable512_f32.h"
void radioCWModulator_F32::update(void) {
float32_t keyData[128]; // CW key down and up, 0.0f and 1.0f
float32_t modulateCW[128]; // Storage for data to modulate sine wave
uint16_t index, i;
float32_t a, b;
audio_block_f32_t *blockOut;
blockOut = AudioStream_F32::allocate_f32(); // Output block
if (!blockOut) return;
// A new character cannot enter sendBuffer during an interrupt, but
// the state IDLE_CW can be created by some other state ending.
// So it needs to be in the audio sample loop.
// We always generate CW at 12 ksps. The number of data points in this
// generation varies to provide 128 output output points after
// interpolation to 48 or 96 ksps.
for(i=0; i<nSamplesPerUpdate; i++)
{
timeMsF += timeSamplesMs;
timeMsI = (uint32_t)(0.5 + timeMsF);
if(!enableXmit) // Just leave the key up and no new characters
{
levelCW = 0.0f;
goto noXmit;
}
switch(stateCW)
{
case IDLE_CW:
timeMsF = 0.0f;
timeMsI = 0;
if(((indexW-indexR)&0X1FF) > 0) // Get next char, if available
{
c = sendBuffer[indexR];
if (c>95)
c -= 64; // Convert lc to caps
else
c -= 32; // Move subscript to (0, 63)
ic = mc[(int)c]; // Ch to morse code lookup
if (c==27) // Long Dash from ';'
{
stateCW = LONG_DASH;
levelCW = 1.0f;
timeMsF = 0.0f;
timeMsI = 0;
}
else if (ic==0X17) // A space character
{
stateCW = WORD_SPACE;
levelCW = 0.0f;
timeMsF = 0.0f;
timeMsI = 0;
}
else if(ic>1 && (ic & 1)==0x01)
{
stateCW = DASH_CW;
levelCW = 1.0f;
timeMsF = 0.0f;
timeMsI = 0;
}
else if(ic>1 && (ic & 1)==0X00)
{
stateCW = DOT_CW;
levelCW = 1.0f;
timeMsF = 0.0f;
timeMsI = 0;
}
else if(ic==0X01)
{
stateCW = IDLE_CW;
levelCW = 0.0f;
}
} // end, if new character
break;
case DASH_CW:
if(timeMsI > dashCW) // Finished dash
{
levelCW = 0.0f;
if(ic>1) ic >>= 1; // Shift right 1
if(ic==1)
stateCW = CHAR_SPACE;
else
stateCW = DOT_DASH_SPACE;
timeMsF = 0.0f;
timeMsI = 0;
}
break;
case DOT_CW:
if(timeMsI > dotCW)
{
levelCW = 0.0f;
if(ic>1) ic >>= 1; // Shift right 1
if(ic==1)
stateCW = CHAR_SPACE;
else
stateCW = DOT_DASH_SPACE;
timeMsF = 0.0f;
timeMsI = 0;
}
break;
case DOT_DASH_SPACE:
if(timeMsI > ddCW) // Just finished
{
timeMsF = 0.0f;
timeMsI = 0;
if(ic>1 && (ic & 1)==0x01)
{
stateCW = DASH_CW;
levelCW = 1.0f;
}
else if(ic>1 && (ic & 1)==0X00)
{
stateCW = DOT_CW;
levelCW = 1.0f;
}
else
{
stateCW = IDLE_CW;
levelCW = 0.0;
}
}
break;
case CHAR_SPACE:
if(timeMsI > chCW+ddCW) // Just finished sending a character
// chCW+ddCW sounds better than chCW to me.
{
indexR++; // Sending is ended, bump the read index
indexR = indexR & 0X1FF; // Confine to (0, 511)
timeMsF = 0.0f;
timeMsI = 0;
stateCW = IDLE_CW;
break;
}
case WORD_SPACE:
if(timeMsI > spCW) // Just finished sending a space
{
indexR++; // Sending is ended, bump the read index
indexR = indexR & 0X1FF; // Confine to (0, 511)
timeMsF = 0.0f;
timeMsI = 0;
stateCW = IDLE_CW;
break;
}
case LONG_DASH:
if(timeMsI > longDashCW) // Just finished sending a long dash
{
levelCW = 0.0f;
stateCW = CHAR_SPACE;
timeMsF = 0.0f;
timeMsI = 0;
break;
}
} // end switch
noXmit:
keyData[i] = levelCW;
} // end, over all 128 times
arm_fir_f32(&GaussLPFInst, keyData, keyData, nSamplesPerUpdate);
// INTERPOLATE - Interpolate here to support higher sample rates,
// while using the same spectral LPF. To this point we have 128, 32
// or 16 "active" data points for 12, 48, or 96ksps.
//
// 0 1 2 3 4 5 6 7 8 9 i
// 0 0 0 0 1 1 1 1 2 2 i/4
// t 0 0 0 t 0 0 0 t 0 i==4*(i/4)
//
if(nSample > 1) // Only needs interpolation if >1
{
for(i=0; i<128; i++)
{
if( i==(nSample*(1/nSample)) )
modulateCW[i]= keyData[i/nSample];
else
modulateCW[i] = 0.0f;
}
arm_fir_f32(&interpolateLPFInst, modulateCW, keyData, 128);
}
// Interpolation is done, now amplitude modulate CW onto a sine wave.
for (i=0; i < 128; i++)
{
phaseS += phaseIncrement;
if (phaseS > 512.0f) phaseS -= 512.0f;
index = (uint16_t) phaseS;
float32_t deltaPhase = phaseS - (float32_t)index;
// Read two nearest values of input value from the sine table
a = sinTable512_f32[index];
b = sinTable512_f32[index+1];
blockOut->data[i] = magnitude*keyData[i]*(a+(b-a)*deltaPhase);
}
AudioStream_F32::transmit(blockOut);
AudioStream_F32::release (blockOut);
}