You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
OpenAudio_ArduinoLibrary/UART_F32.h

216 lines
7.8 KiB

/*
* UART_F32
* 10 JUne 2022 - Separated from FM Discriminator
*
* Copyright (c) 2022 Bob Larkin
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
/* This object takes a single audio input representing the baseband output
* of a suitable detector such as frequency or phase. The polarity of the
* input is >0.0 for logic 1 as well as the the idle state and <0.0 for logic 0.
* The timing of the UART is specified by the
* setUART(cTauI, cTauHalfI, nBits, nParity, nStop) function. The first two
* parameters are the data bit period measured in audio sample periods,
* and half of that (roughly) that sets the number of audio sample periods between
* between the 1-to-0 transition of the start bit and the middle of the start bit.
* nBits can be between 1 and 32 (default 8). nParity can be PARITY_NONE,
* PARITY_ODD or PARITY_EVEN. nStop is currently restricted to 1, but
* this could change.
*
* Data is read using the functions
* int32_t getNDataBuffer() that returns the number of words available
* and readUartData() that returns a pointer to the oldest UART data structure:
* struct uartData {
* uint32_t data;
* uint8_t error; // Parity=01, Overrun=02, Underrun=04
* int32_t timeCrossings;}
* Up to 16 of these structures can be buffered before creating
* an ERR_OVERRUN.
*
* NOTE: Parity checking does nothing now. Needs to be added using
* the in-place function. June 2022
*
* Time: For T4.0, 7 microseconds for 128 data points.
*
*/
#ifndef _uart_f32_h
#define _uart_f32_h
#include "AudioStream_F32.h"
#include "OpenAudio_ArduinoLibrary.h"
#define SERIAL_IDLE 0
#define SERIAL_DATA 1
#define SERIAL_DATA_FINISHED 2
#define PARITY_NONE 0
#define PARITY_ODD 1
#define PARITY_EVEN 2
#define ERR_FRAME 1;
#define ERR_OVERRUN 2
#define ERR_PARITY 4
struct uartData {
uint32_t data;
uint8_t status;
int32_t timeCrossings;
};
class UART_F32 : public AudioStream_F32 {
//GUI: inputs:1, outputs:0 //this line used for automatic generation of GUI node
//GUI: shortName: uart
public:
// Default block size and sample rate:
UART_F32(void) : AudioStream_F32(1, inputQueueArray_f32) {
}
// Option of AudioSettings_F32 change to block size and/or sample rate:
UART_F32(const AudioSettings_F32 &settings) : AudioStream_F32(1, inputQueueArray_f32) {
sampleRate_Hz = settings.sample_rate_Hz;
block_size = settings.audio_block_samples;
}
void setUART(uint32_t _cTauI, uint32_t _cTauHalfI,
uint16_t _nBits, uint16_t _nParity, uint16_t _nStop) {
cTauI = _cTauI;
cTauHalfI = _cTauHalfI;
nBits = _nBits;
nStop = _nStop;
nTotal = 1 + nBits;
if(nParity > 0) nTotal++;
}
// Returns the number of unread data words
int32_t getNDataBuffer(void) {
delay(1); // Why needed?? <<<<<<<<<<<<<<
return (uartWriteIndex - uartReadIndex);
}
// Read UART data returns a pointer to the uartData structure.
// This increments the index and thus can only be called once per
// successful UART output word. If no data is available, a NULL
// pointer is returned.
struct uartData* readUartData(void) {
if(uartReadIndex >= uartWriteIndex) // Never should be greater
return NULL;
int32_t uri = uartReadIndex & uartDMask;
// Circular increment of the read index
uartReadIndex++;
bufferSpace = 16 - uartWriteIndex + uartReadIndex;
return &uartD[uri];
}
// The input is a floating point value, centered on 0.0. One source of this
// could be a discriminator base-band output. If the input signal is offset
// from zero, it can be corrected with this function. This inputOffset is
// added to the input and can be + or - in value.
void setInputOffset(float32_t _inputOffset) {
inputOffset = _inputOffset;
}
void setSampleRate_Hz(float32_t _sampleRate_Hz) {
sampleRate_Hz = _sampleRate_Hz;
}
virtual void update(void);
private:
// One input data pointer
audio_block_f32_t *inputQueueArray_f32[1];
float32_t sampleRate_Hz = AUDIO_SAMPLE_RATE_EXACT;
uint16_t block_size = AUDIO_BLOCK_SAMPLES;
// BFSK decode clock variables
// Always 1 start bit.
uint16_t nBits = 8; // Data bits
uint16_t nParity = PARITY_NONE;
uint16_t nStop = 1; // Fixed for now
uint16_t nTotal = 9; // 1+nBits+Parity
uint32_t cTauI = 40UL;
uint32_t cTauHalfI = 20UL;
struct uartData uartD[16]; // Circular buffer of UART data
float32_t inputOffset = 0.0f; // Offset of input data
// These next 2 indices are the index, mod 16, where we wil write
// data to next, or read data from next (if available).
// If the two are equal, no data is available to read.
int32_t uartReadIndex = 0L; // Both indices continue to grow, unbounded
int32_t uartWriteIndex = 0L;
const int32_t uartDMask = 0B1111; // Mask for 16 word buffer
int32_t bufferSpace = 16L; // 16 - uartWriteIndex + uartReadIndex
uint16_t serialState = SERIAL_IDLE;
uint8_t saveStatus;
float32_t yData = 0.0f;
float32_t yLast = -0.01f;
float32_t yClock = -1.0f;
float32_t errorClock = 0.0f;
uint32_t sClock = 0UL; // Counted in audio sample units
uint32_t lastTime = 0UL; // Last zero crossing
uint32_t timeStartBit= 0UL;
uint32_t timeLastTransition = 0UL;
uint32_t cSampleNext = 0UL;
uint8_t bitCount = 0UL; // Where we are at in receiving word
uint32_t bitMask = 1; // Values 1, 2, 4, 8, 16,... tracks bitCount
uint32_t dataWord = 0UL;
uint32_t elapsedTime = 0UL;
void initUartData(uint n) {
uartD[n].data = 0UL;
uartD[n].status = 0; // including data ready, overrun, parity and framing errors
uartD[n].timeCrossings = 0;
}
// Write an output word for Serial BFSK modem
void writeUartData(uint32_t _data, uint8_t _status, int32_t _timeCrossings) {
bufferSpace = 16L - uartWriteIndex + uartReadIndex; //0 to 16 amount of space available
if(bufferSpace > 0)
{
uartD[uartWriteIndex&uartDMask].data = _data;
uartD[uartWriteIndex&uartDMask].status = _status;
uartD[uartWriteIndex&uartDMask].timeCrossings = _timeCrossings;
uartWriteIndex++; // Bump write index
saveStatus &= ~ERR_OVERRUN; // Clear overrun bit, it has finally been sent
}
else // No room in buffer
{
saveStatus |= ERR_OVERRUN; // Error gets sent when overrun is cleared
}
bufferSpace = 16L - uartWriteIndex + uartReadIndex;
}
// Thanks svicent. NEEDS TO BE ADDED TO writeUartData() <<<----
uint8_t oddParity(uint32_t ino) {
uint8_t n8 = 0;
while(ino != 0)
{
n8++;
ino &= (ino-1); // the loop will execute once for each bit of ino set
}
/* if n8 is odd, least significant bit will be 1 */
return (n8 & 1);
}
}; // End class UART_F32
#endif