MiniDexed

MiniDexed is a FM synthesizer closely modeled on the famous DX7 by a well-known Japanese manufacturer running on a bare metal Raspberry Pi (without a Linux kernel or operating system). On Raspberry Pi 2 and larger, it can run 8 tone generators, basically creating an open source equivalent of the TX816/TX802 (8 DX7 instances without the keyboard in one box).

Features

• Uses Synth_Dexed with circle-stdlib
• SD card contents can be downloaded from GitHub Releases
• Runs on Raspberry Pi Zero, Raspberry Pi 1, 2, 3, 4, 400
• produces sound on the headphone jack, HDMI (better), or a dedicated DAC (best)
• Supports multiple voices through Program Change and Bank Change LSB/MSB MIDI messages
• Loads .syx files from SD card (e.g., using getsysex.sh or from Dexed_cart_1.0.zip)
• Menu structure on optional HD44780 display and rotary encoder
• Runs up to 8 Dexed instances simultaneously (like in a TX816) and mixes their output together
• Allows for each Dexed instance to be detuned and stereo shifted
• Allows to configure multiple Dexed instances through performance.ini files
• Compressor effect
• Reverb effect

TODO

• Make it possible to assign voice parameters to sliders and knobs on MIDI controllers
• https://github.com/probonopd/MiniDexed/issues

Introduction

Video about this project by Floyd Steinberg:

System Requirements

• Raspberry Pi 1, 2, 3, 4, or 400 (Zero and Zero 2 can be used but need HDMI or a supported i2s DAC for audio out). On Raspberry Pi 1 and on Raspberry Pi Zero there will be severely limited functionality (only one tone generator instead of 8)
• A PCM5102A or PCM5122 based DAC or HDMI display or audio extractor for good sound quality. If you don't have this, you can use the headphone jack on the Raspberry Pi but on anything but the Raspberry 4 the sound quality will be seriously limited
• Optionally (but highly recommended), an alphanumeric 1602 LCD Display and a KY-040 rotary encoder

Usage

• In the case of Raspberry Pi 4, Update the firmware and bootloader to the latest version (not doing this may cause USB reliability issues)
• Download from GitHub Releases
• Unzip
• Put the files into the root directory of a FAT32 formatted partition on SD/microSD card
• Put SD/microSD card into Raspberry Pi 1, 2, 3 or 4, or 400 (Zero and Zero 2 can be used but need HDMI or a supported i2c DAC for audio out)
• Attach headphones to the headphone jack using SoundDevice=pwm in minidexed.ini (default) (poor audio quality)
• Alternatively, attach a PCM5102A or PCM5122 based DAC and select i2c sound output using SoundDevice=i2s in minidexed.ini (best audio quality)
• Alternatively, attach a HDMI display with sound and select HDMI sound output using SoundDevice=hdmi in minidexed.ini (this may introduce slight latency)
• Attach a MIDI keyboard via USB
• Boot
• Start playing
• See the Wiki for Menu operation

Pinout

All devices on Raspberry Pi GPIOs are optional.

CAUTION: All GPIO numbers are chip numbers, not header positions.

GPIO	Device		Function	Direction	Comment
14	UART		TXD		OUT
15	UART		RXD		IN
18	DAC		CLK		OUT
19	DAC		FS		OUT
21	DAC		DOUT		OUT
02	I2C		SDA		IN/OUT
03	I2C		SCL		OUT
17	LCD		EN		OUT
27	LCD		RS		OUT
16	LCD		RW		OUT
22	LCD		D4		OUT
23	LCD		D5		OUT
24	LCD		D6		OUT
25	LCD		D7		OUT
05	ROTARY ENCODER	CLK (ENC A)	IN		default setting
06	ROTARY ENCODER	DT (ENC B)	IN		default setting
26	ROTARY ENCODER	SW		IN
12	PWM AUDIO	PWM0		OUT
13	PWM AUDIO	PWM1		OUT
07	SPI		/CE1		OUT
08	SPI		/CE0		OUT
09	SPI		MISO		IN
10	SPI		MOSI		OUT
11	SPI		SCLK		OUT
04	NONE
20	NONE

Downloading

Compiled versions are available on GitHub Releases. Just download and put on a FAT32 formatted SD card.

Building locally

If you need to build the source code yoursel, you can use the following example, e.g., to build for Raspberry Pi 4 on a Ubuntu 20.04 build system. See build.yml for complete build steps that create versions for Raspberry Pi 1, 2, 3,and 4 in 32-bit and 64-bit as required.

# Choose your RPi
export RPI=4

git clone https://github.com/probonopd/MiniDexed
cd MiniDexed
mkdir -p kernels sdcard

# Recursively pull git submodules
git submodule update --init --recursive

# Install toolchain
if [ "${RPI}" -gt 2 ]
then
	wget https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz
else
	wget https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-arm-none-eabi.tar.xz
fi
tar xvf gcc-arm-*-*.tar.xz 
export PATH=$(readlink -f ./gcc-*/bin/):$PATH

# Build dependencies and MiniDexed
./build.sh
cp ./src/kernel*.img ./kernels/

# Get Raspberry Pi boot files
cd ./circle-stdlib/libs/circle/boot
make
if [ "${RPI}" -gt 2 ]
then
	make armstub64
fi
cd -

# Make zip that contains Raspberry Pi 4 boot files. The contents can be copied to a FAT32 formatted partition on a microSD card
cd sdcard
../getsysex.sh
cd ..
cp -r ./circle-stdlib/libs/circle/boot/* sdcard
rm -rf sdcard/config*.txt sdcard/README sdcard/Makefile sdcard/armstub sdcard/COPYING.linux
cp ./src/config.txt ./src/minidexed.ini ./src/*img ./src/performance.ini sdcard/
echo "usbspeed=full" > sdcard/cmdline.txt
cd sdcard
cp ../kernels/* . || true
zip -r ../MiniDexed_$GITHUB_RUN_NUMBER_$(date +%Y-%m-%d).zip *
cd -

# Optionally, create a RPi image. This can be written to a microSD card using tools like Etcher or dd
sudo apt install --yes  mount parted
IMG="`date +%Y-%m-%d`_minidexed-RPi${RPI}.img"
dd of="${IMG}" seek=50MiB bs=1 count=0
sudo parted "${IMG}" mktable msdos
sudo parted "${IMG}" mkpart primary fat32 2048s 100%
DEV=`sudo losetup --find --partscan --show "${IMG}"`
sudo mkfs.vfat -F 32 -n BOOT "${DEV}p1"
mkdir boot
sudo mount "${DEV}p1" boot
sudo cp -R sdcard/* boot
sudo umount boot
sudo losetup -d "${DEV}"
rm -r boot

# Write to SD card
sudo dd if="${IMG}" of=/dev/mmcblk0 bs=512k status=progress && sync

Discussions

https://github.com/probonopd/MiniDexed/discussions

Wiki

https://github.com/probonopd/MiniDexed/wiki

Acknowledgements

• raphlinus for the MSFA sound engine
• asb2m10 for the Dexed software
• dcoredump for https://codeberg.org/dcoredump/Synth_Dexed, a port of Dexed for embedded systems
• rsta2 for https://github.com/rsta2/circle, the library to run code on bare betal Raspberry Pi (without a Linux kernel or operating system) and for the bulk of the MiniDexed code
• smuehlst for https://github.com/smuehlst/circle-stdlib, a version with Standard C and C++ library support