You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
MiniDexed/src/minidexed.h

341 lines
11 KiB

//
// minidexed.h
//
Restructure code and add new features (#37) * Make synth parameters configurable * Add class CConfig, which holds the configuration * Add template config file minidexed.ini * Register panic handler in CKernel to allow to display assertions * Fix: Performance timer did not show correct percent value with HDMI * Add class CDexedAdapter Some Dexed methods require to be guarded from being interrupted by other Dexed calls. This is done in the class CDexedAdapter. * Add class CUserInterface The user interface should be implemented here. As a start it supports showing the program number and name on the LCD display. The LCD output is buffered, so that LCD writes from an IRQ handler are possible. * Move MIDI handling from CMiniDexed to specific classes * CMIDIDevice is the generic MIDI handler * CMIDIKeyboard handles USB audio class MIDI devices * CSerialMIDIDevice handles the serial MIDI device * Now all MIDI inputs can work simultaneous * Program change and bank select work with serial MIDI * Add headers to all files * Include voices.c in sysexfileloader.cpp * Cleanup Makefile * Support headless operation on Raspberry Pi 4 Some code cleanup for src/kernel.* * Code cleanup for src/minidexed.* Move implementation of constructors to minidexed.cpp Reorder member variables * Support multiple USB MIDI inputs at once * Maximum 2 inputs on Raspberry Pi 1-3 * Maximum 4 inputs on Raspberry Pi 4 * Suppress frequent messages in MIDI dump * Use minidexed.txt * Document `SoundDevice` in `minidexed.ini` Co-authored-by: probonopd <probonopd@users.noreply.github.com>
3 years ago
// MiniDexed - Dexed FM synthesizer for bare metal Raspberry Pi
// Copyright (C) 2022 The MiniDexed Team
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
#ifndef _minidexed_h
#define _minidexed_h
Restructure code and add new features (#37) * Make synth parameters configurable * Add class CConfig, which holds the configuration * Add template config file minidexed.ini * Register panic handler in CKernel to allow to display assertions * Fix: Performance timer did not show correct percent value with HDMI * Add class CDexedAdapter Some Dexed methods require to be guarded from being interrupted by other Dexed calls. This is done in the class CDexedAdapter. * Add class CUserInterface The user interface should be implemented here. As a start it supports showing the program number and name on the LCD display. The LCD output is buffered, so that LCD writes from an IRQ handler are possible. * Move MIDI handling from CMiniDexed to specific classes * CMIDIDevice is the generic MIDI handler * CMIDIKeyboard handles USB audio class MIDI devices * CSerialMIDIDevice handles the serial MIDI device * Now all MIDI inputs can work simultaneous * Program change and bank select work with serial MIDI * Add headers to all files * Include voices.c in sysexfileloader.cpp * Cleanup Makefile * Support headless operation on Raspberry Pi 4 Some code cleanup for src/kernel.* * Code cleanup for src/minidexed.* Move implementation of constructors to minidexed.cpp Reorder member variables * Support multiple USB MIDI inputs at once * Maximum 2 inputs on Raspberry Pi 1-3 * Maximum 4 inputs on Raspberry Pi 4 * Suppress frequent messages in MIDI dump * Use minidexed.txt * Document `SoundDevice` in `minidexed.ini` Co-authored-by: probonopd <probonopd@users.noreply.github.com>
3 years ago
#include "dexedadapter.h"
#include "config.h"
#include "userinterface.h"
#include "sysexfileloader.h"
#include "performanceconfig.h"
Restructure code and add new features (#37) * Make synth parameters configurable * Add class CConfig, which holds the configuration * Add template config file minidexed.ini * Register panic handler in CKernel to allow to display assertions * Fix: Performance timer did not show correct percent value with HDMI * Add class CDexedAdapter Some Dexed methods require to be guarded from being interrupted by other Dexed calls. This is done in the class CDexedAdapter. * Add class CUserInterface The user interface should be implemented here. As a start it supports showing the program number and name on the LCD display. The LCD output is buffered, so that LCD writes from an IRQ handler are possible. * Move MIDI handling from CMiniDexed to specific classes * CMIDIDevice is the generic MIDI handler * CMIDIKeyboard handles USB audio class MIDI devices * CSerialMIDIDevice handles the serial MIDI device * Now all MIDI inputs can work simultaneous * Program change and bank select work with serial MIDI * Add headers to all files * Include voices.c in sysexfileloader.cpp * Cleanup Makefile * Support headless operation on Raspberry Pi 4 Some code cleanup for src/kernel.* * Code cleanup for src/minidexed.* Move implementation of constructors to minidexed.cpp Reorder member variables * Support multiple USB MIDI inputs at once * Maximum 2 inputs on Raspberry Pi 1-3 * Maximum 4 inputs on Raspberry Pi 4 * Suppress frequent messages in MIDI dump * Use minidexed.txt * Document `SoundDevice` in `minidexed.ini` Co-authored-by: probonopd <probonopd@users.noreply.github.com>
3 years ago
#include "midikeyboard.h"
#include "pckeyboard.h"
#include "serialmididevice.h"
#include "perftimer.h"
#include <fatfs/ff.h>
#include <stdint.h>
#include <string>
Restructure code and add new features (#37) * Make synth parameters configurable * Add class CConfig, which holds the configuration * Add template config file minidexed.ini * Register panic handler in CKernel to allow to display assertions * Fix: Performance timer did not show correct percent value with HDMI * Add class CDexedAdapter Some Dexed methods require to be guarded from being interrupted by other Dexed calls. This is done in the class CDexedAdapter. * Add class CUserInterface The user interface should be implemented here. As a start it supports showing the program number and name on the LCD display. The LCD output is buffered, so that LCD writes from an IRQ handler are possible. * Move MIDI handling from CMiniDexed to specific classes * CMIDIDevice is the generic MIDI handler * CMIDIKeyboard handles USB audio class MIDI devices * CSerialMIDIDevice handles the serial MIDI device * Now all MIDI inputs can work simultaneous * Program change and bank select work with serial MIDI * Add headers to all files * Include voices.c in sysexfileloader.cpp * Cleanup Makefile * Support headless operation on Raspberry Pi 4 Some code cleanup for src/kernel.* * Code cleanup for src/minidexed.* Move implementation of constructors to minidexed.cpp Reorder member variables * Support multiple USB MIDI inputs at once * Maximum 2 inputs on Raspberry Pi 1-3 * Maximum 4 inputs on Raspberry Pi 4 * Suppress frequent messages in MIDI dump * Use minidexed.txt * Document `SoundDevice` in `minidexed.ini` Co-authored-by: probonopd <probonopd@users.noreply.github.com>
3 years ago
#include <circle/types.h>
#include <circle/interrupt.h>
#include <circle/gpiomanager.h>
#include <circle/i2cmaster.h>
#include <circle/spimaster.h>
#include <circle/multicore.h>
#include <circle/sound/soundbasedevice.h>
#include <circle/spinlock.h>
#include "common.h"
#include "effect_mixer.hpp"
#include "effect_platervbstereo.h"
#include "effect_compressor.h"
class CMiniDexed
#ifdef ARM_ALLOW_MULTI_CORE
: public CMultiCoreSupport
#endif
Restructure code and add new features (#37) * Make synth parameters configurable * Add class CConfig, which holds the configuration * Add template config file minidexed.ini * Register panic handler in CKernel to allow to display assertions * Fix: Performance timer did not show correct percent value with HDMI * Add class CDexedAdapter Some Dexed methods require to be guarded from being interrupted by other Dexed calls. This is done in the class CDexedAdapter. * Add class CUserInterface The user interface should be implemented here. As a start it supports showing the program number and name on the LCD display. The LCD output is buffered, so that LCD writes from an IRQ handler are possible. * Move MIDI handling from CMiniDexed to specific classes * CMIDIDevice is the generic MIDI handler * CMIDIKeyboard handles USB audio class MIDI devices * CSerialMIDIDevice handles the serial MIDI device * Now all MIDI inputs can work simultaneous * Program change and bank select work with serial MIDI * Add headers to all files * Include voices.c in sysexfileloader.cpp * Cleanup Makefile * Support headless operation on Raspberry Pi 4 Some code cleanup for src/kernel.* * Code cleanup for src/minidexed.* Move implementation of constructors to minidexed.cpp Reorder member variables * Support multiple USB MIDI inputs at once * Maximum 2 inputs on Raspberry Pi 1-3 * Maximum 4 inputs on Raspberry Pi 4 * Suppress frequent messages in MIDI dump * Use minidexed.txt * Document `SoundDevice` in `minidexed.ini` Co-authored-by: probonopd <probonopd@users.noreply.github.com>
3 years ago
{
public:
CMiniDexed (CConfig *pConfig, CInterruptSystem *pInterrupt,
CGPIOManager *pGPIOManager, CI2CMaster *pI2CMaster, CSPIMaster *pSPIMaster, FATFS *pFileSystem);
bool Initialize (void);
Restructure code and add new features (#37) * Make synth parameters configurable * Add class CConfig, which holds the configuration * Add template config file minidexed.ini * Register panic handler in CKernel to allow to display assertions * Fix: Performance timer did not show correct percent value with HDMI * Add class CDexedAdapter Some Dexed methods require to be guarded from being interrupted by other Dexed calls. This is done in the class CDexedAdapter. * Add class CUserInterface The user interface should be implemented here. As a start it supports showing the program number and name on the LCD display. The LCD output is buffered, so that LCD writes from an IRQ handler are possible. * Move MIDI handling from CMiniDexed to specific classes * CMIDIDevice is the generic MIDI handler * CMIDIKeyboard handles USB audio class MIDI devices * CSerialMIDIDevice handles the serial MIDI device * Now all MIDI inputs can work simultaneous * Program change and bank select work with serial MIDI * Add headers to all files * Include voices.c in sysexfileloader.cpp * Cleanup Makefile * Support headless operation on Raspberry Pi 4 Some code cleanup for src/kernel.* * Code cleanup for src/minidexed.* Move implementation of constructors to minidexed.cpp Reorder member variables * Support multiple USB MIDI inputs at once * Maximum 2 inputs on Raspberry Pi 1-3 * Maximum 4 inputs on Raspberry Pi 4 * Suppress frequent messages in MIDI dump * Use minidexed.txt * Document `SoundDevice` in `minidexed.ini` Co-authored-by: probonopd <probonopd@users.noreply.github.com>
3 years ago
void Process (bool bPlugAndPlayUpdated);
#ifdef ARM_ALLOW_MULTI_CORE
void Run (unsigned nCore);
#endif
CSysExFileLoader *GetSysExFileLoader (void);
Performance file handling (#581) Implements #580 * Initial update in performance file handling. This change makes the 6-digit number in the filename indicate a performance "voice number" in MiniDexed. The external filename numbers will now match any Program Change messages using the common MIDI concept of user selecting 1..128 whilst internally they are treated as 0..127. Note: in the case of performances, performance 1 (index 0) is the Default "performance.ini" file for backwards compatibility. Also note that in this version, new performances, when saved, cannot occupy free slots between other performances - they are added to the end. Even though the filename standard gives 6 digit numbers, the actual number of performances is still limited to 256. * Start of subdirectory implementation for performance banks. * Initial version with performance banks, selectable over MIDI only. * Initial implementation of performance bank switching in the UI menu. * Remove debug information, fix few bugs, including PgmUpDown handling and performance numbers out of range. * Bugfixes for legacy cases when no performance directory exists plus some extra checks for saving and deleting performances. * Remove verbose debug options (doh!) * Fix a minor off-by-one error found in review. * Bugfix - removed redundant legacy check that results in out of order performance files being skipped on load. * Fix bug in MIDI button handling commands. * Fix for issue where wrong performance is selected [L] on new save. * Suggested update to UI to show bank/performance numbers. * Make performance bank select asynchronous to MIDI and UI to stop corruptions on loading performances. * Fix an assert that should be a run-time test. * Ensure bank selection works when PCCH is not enabled, and that UI remains consistent when changing banks. --------- Co-authored-by: Kevin <68612569+diyelectromusic@users.noreply.github.com>
10 months ago
CPerformanceConfig *GetPerformanceConfig (void);
void BankSelect (unsigned nBank, unsigned nTG);
Performance file handling (#581) Implements #580 * Initial update in performance file handling. This change makes the 6-digit number in the filename indicate a performance "voice number" in MiniDexed. The external filename numbers will now match any Program Change messages using the common MIDI concept of user selecting 1..128 whilst internally they are treated as 0..127. Note: in the case of performances, performance 1 (index 0) is the Default "performance.ini" file for backwards compatibility. Also note that in this version, new performances, when saved, cannot occupy free slots between other performances - they are added to the end. Even though the filename standard gives 6 digit numbers, the actual number of performances is still limited to 256. * Start of subdirectory implementation for performance banks. * Initial version with performance banks, selectable over MIDI only. * Initial implementation of performance bank switching in the UI menu. * Remove debug information, fix few bugs, including PgmUpDown handling and performance numbers out of range. * Bugfixes for legacy cases when no performance directory exists plus some extra checks for saving and deleting performances. * Remove verbose debug options (doh!) * Fix a minor off-by-one error found in review. * Bugfix - removed redundant legacy check that results in out of order performance files being skipped on load. * Fix bug in MIDI button handling commands. * Fix for issue where wrong performance is selected [L] on new save. * Suggested update to UI to show bank/performance numbers. * Make performance bank select asynchronous to MIDI and UI to stop corruptions on loading performances. * Fix an assert that should be a run-time test. * Ensure bank selection works when PCCH is not enabled, and that UI remains consistent when changing banks. --------- Co-authored-by: Kevin <68612569+diyelectromusic@users.noreply.github.com>
10 months ago
void BankSelectPerformance (unsigned nBank);
void BankSelectMSB (unsigned nBankMSB, unsigned nTG);
Performance file handling (#581) Implements #580 * Initial update in performance file handling. This change makes the 6-digit number in the filename indicate a performance "voice number" in MiniDexed. The external filename numbers will now match any Program Change messages using the common MIDI concept of user selecting 1..128 whilst internally they are treated as 0..127. Note: in the case of performances, performance 1 (index 0) is the Default "performance.ini" file for backwards compatibility. Also note that in this version, new performances, when saved, cannot occupy free slots between other performances - they are added to the end. Even though the filename standard gives 6 digit numbers, the actual number of performances is still limited to 256. * Start of subdirectory implementation for performance banks. * Initial version with performance banks, selectable over MIDI only. * Initial implementation of performance bank switching in the UI menu. * Remove debug information, fix few bugs, including PgmUpDown handling and performance numbers out of range. * Bugfixes for legacy cases when no performance directory exists plus some extra checks for saving and deleting performances. * Remove verbose debug options (doh!) * Fix a minor off-by-one error found in review. * Bugfix - removed redundant legacy check that results in out of order performance files being skipped on load. * Fix bug in MIDI button handling commands. * Fix for issue where wrong performance is selected [L] on new save. * Suggested update to UI to show bank/performance numbers. * Make performance bank select asynchronous to MIDI and UI to stop corruptions on loading performances. * Fix an assert that should be a run-time test. * Ensure bank selection works when PCCH is not enabled, and that UI remains consistent when changing banks. --------- Co-authored-by: Kevin <68612569+diyelectromusic@users.noreply.github.com>
10 months ago
void BankSelectMSBPerformance (unsigned nBankMSB);
void BankSelectLSB (unsigned nBankLSB, unsigned nTG);
Performance file handling (#581) Implements #580 * Initial update in performance file handling. This change makes the 6-digit number in the filename indicate a performance "voice number" in MiniDexed. The external filename numbers will now match any Program Change messages using the common MIDI concept of user selecting 1..128 whilst internally they are treated as 0..127. Note: in the case of performances, performance 1 (index 0) is the Default "performance.ini" file for backwards compatibility. Also note that in this version, new performances, when saved, cannot occupy free slots between other performances - they are added to the end. Even though the filename standard gives 6 digit numbers, the actual number of performances is still limited to 256. * Start of subdirectory implementation for performance banks. * Initial version with performance banks, selectable over MIDI only. * Initial implementation of performance bank switching in the UI menu. * Remove debug information, fix few bugs, including PgmUpDown handling and performance numbers out of range. * Bugfixes for legacy cases when no performance directory exists plus some extra checks for saving and deleting performances. * Remove verbose debug options (doh!) * Fix a minor off-by-one error found in review. * Bugfix - removed redundant legacy check that results in out of order performance files being skipped on load. * Fix bug in MIDI button handling commands. * Fix for issue where wrong performance is selected [L] on new save. * Suggested update to UI to show bank/performance numbers. * Make performance bank select asynchronous to MIDI and UI to stop corruptions on loading performances. * Fix an assert that should be a run-time test. * Ensure bank selection works when PCCH is not enabled, and that UI remains consistent when changing banks. --------- Co-authored-by: Kevin <68612569+diyelectromusic@users.noreply.github.com>
10 months ago
void BankSelectLSBPerformance (unsigned nBankLSB);
void ProgramChange (unsigned nProgram, unsigned nTG);
void ProgramChangePerformance (unsigned nProgram);
void SetVolume (unsigned nVolume, unsigned nTG);
void SetPan (unsigned nPan, unsigned nTG); // 0 .. 127
void SetMasterTune (int nMasterTune, unsigned nTG); // -99 .. 99
void SetCutoff (int nCutoff, unsigned nTG); // 0 .. 99
void SetResonance (int nResonance, unsigned nTG); // 0 .. 99
void SetMIDIChannel (uint8_t uchChannel, unsigned nTG);
void keyup (int16_t pitch, unsigned nTG);
void keydown (int16_t pitch, uint8_t velocity, unsigned nTG);
void setSustain (bool sustain, unsigned nTG);
void panic (uint8_t value, unsigned nTG);
void notesOff (uint8_t value, unsigned nTG);
void setModWheel (uint8_t value, unsigned nTG);
void setPitchbend (int16_t value, unsigned nTG);
void ControllersRefresh (unsigned nTG);
void setFootController (uint8_t value, unsigned nTG);
void setBreathController (uint8_t value, unsigned nTG);
void setAftertouch (uint8_t value, unsigned nTG);
void SetReverbSend (unsigned nReverbSend, unsigned nTG); // 0 .. 127
void setMonoMode(uint8_t mono, uint8_t nTG);
void setPitchbendRange(uint8_t range, uint8_t nTG);
void setPitchbendStep(uint8_t step, uint8_t nTG);
void setPortamentoMode(uint8_t mode, uint8_t nTG);
void setPortamentoGlissando(uint8_t glissando, uint8_t nTG);
void setPortamentoTime(uint8_t time, uint8_t nTG);
void setModWheelRange(uint8_t range, uint8_t nTG);
void setModWheelTarget(uint8_t target, uint8_t nTG);
void setFootControllerRange(uint8_t range, uint8_t nTG);
void setFootControllerTarget(uint8_t target, uint8_t nTG);
void setBreathControllerRange(uint8_t range, uint8_t nTG);
void setBreathControllerTarget(uint8_t target, uint8_t nTG);
void setAftertouchRange(uint8_t range, uint8_t nTG);
void setAftertouchTarget(uint8_t target, uint8_t nTG);
void loadVoiceParameters(const uint8_t* data, uint8_t nTG);
void setVoiceDataElement(uint8_t data, uint8_t number, uint8_t nTG);
void getSysExVoiceDump(uint8_t* dest, uint8_t nTG);
void setModController (unsigned controller, unsigned parameter, uint8_t value, uint8_t nTG);
unsigned getModController (unsigned controller, unsigned parameter, uint8_t nTG);
int16_t checkSystemExclusive(const uint8_t* pMessage, const uint16_t nLength, uint8_t nTG);
std::string GetPerformanceFileName(unsigned nID);
std::string GetPerformanceName(unsigned nID);
unsigned GetLastPerformance();
Performance file handling (#581) Implements #580 * Initial update in performance file handling. This change makes the 6-digit number in the filename indicate a performance "voice number" in MiniDexed. The external filename numbers will now match any Program Change messages using the common MIDI concept of user selecting 1..128 whilst internally they are treated as 0..127. Note: in the case of performances, performance 1 (index 0) is the Default "performance.ini" file for backwards compatibility. Also note that in this version, new performances, when saved, cannot occupy free slots between other performances - they are added to the end. Even though the filename standard gives 6 digit numbers, the actual number of performances is still limited to 256. * Start of subdirectory implementation for performance banks. * Initial version with performance banks, selectable over MIDI only. * Initial implementation of performance bank switching in the UI menu. * Remove debug information, fix few bugs, including PgmUpDown handling and performance numbers out of range. * Bugfixes for legacy cases when no performance directory exists plus some extra checks for saving and deleting performances. * Remove verbose debug options (doh!) * Fix a minor off-by-one error found in review. * Bugfix - removed redundant legacy check that results in out of order performance files being skipped on load. * Fix bug in MIDI button handling commands. * Fix for issue where wrong performance is selected [L] on new save. * Suggested update to UI to show bank/performance numbers. * Make performance bank select asynchronous to MIDI and UI to stop corruptions on loading performances. * Fix an assert that should be a run-time test. * Ensure bank selection works when PCCH is not enabled, and that UI remains consistent when changing banks. --------- Co-authored-by: Kevin <68612569+diyelectromusic@users.noreply.github.com>
10 months ago
unsigned GetPerformanceBank();
unsigned GetLastPerformanceBank();
unsigned GetActualPerformanceID();
void SetActualPerformanceID(unsigned nID);
Performance file handling (#581) Implements #580 * Initial update in performance file handling. This change makes the 6-digit number in the filename indicate a performance "voice number" in MiniDexed. The external filename numbers will now match any Program Change messages using the common MIDI concept of user selecting 1..128 whilst internally they are treated as 0..127. Note: in the case of performances, performance 1 (index 0) is the Default "performance.ini" file for backwards compatibility. Also note that in this version, new performances, when saved, cannot occupy free slots between other performances - they are added to the end. Even though the filename standard gives 6 digit numbers, the actual number of performances is still limited to 256. * Start of subdirectory implementation for performance banks. * Initial version with performance banks, selectable over MIDI only. * Initial implementation of performance bank switching in the UI menu. * Remove debug information, fix few bugs, including PgmUpDown handling and performance numbers out of range. * Bugfixes for legacy cases when no performance directory exists plus some extra checks for saving and deleting performances. * Remove verbose debug options (doh!) * Fix a minor off-by-one error found in review. * Bugfix - removed redundant legacy check that results in out of order performance files being skipped on load. * Fix bug in MIDI button handling commands. * Fix for issue where wrong performance is selected [L] on new save. * Suggested update to UI to show bank/performance numbers. * Make performance bank select asynchronous to MIDI and UI to stop corruptions on loading performances. * Fix an assert that should be a run-time test. * Ensure bank selection works when PCCH is not enabled, and that UI remains consistent when changing banks. --------- Co-authored-by: Kevin <68612569+diyelectromusic@users.noreply.github.com>
10 months ago
unsigned GetActualPerformanceBankID();
void SetActualPerformanceBankID(unsigned nBankID);
bool SetNewPerformance(unsigned nID);
Performance file handling (#581) Implements #580 * Initial update in performance file handling. This change makes the 6-digit number in the filename indicate a performance "voice number" in MiniDexed. The external filename numbers will now match any Program Change messages using the common MIDI concept of user selecting 1..128 whilst internally they are treated as 0..127. Note: in the case of performances, performance 1 (index 0) is the Default "performance.ini" file for backwards compatibility. Also note that in this version, new performances, when saved, cannot occupy free slots between other performances - they are added to the end. Even though the filename standard gives 6 digit numbers, the actual number of performances is still limited to 256. * Start of subdirectory implementation for performance banks. * Initial version with performance banks, selectable over MIDI only. * Initial implementation of performance bank switching in the UI menu. * Remove debug information, fix few bugs, including PgmUpDown handling and performance numbers out of range. * Bugfixes for legacy cases when no performance directory exists plus some extra checks for saving and deleting performances. * Remove verbose debug options (doh!) * Fix a minor off-by-one error found in review. * Bugfix - removed redundant legacy check that results in out of order performance files being skipped on load. * Fix bug in MIDI button handling commands. * Fix for issue where wrong performance is selected [L] on new save. * Suggested update to UI to show bank/performance numbers. * Make performance bank select asynchronous to MIDI and UI to stop corruptions on loading performances. * Fix an assert that should be a run-time test. * Ensure bank selection works when PCCH is not enabled, and that UI remains consistent when changing banks. --------- Co-authored-by: Kevin <68612569+diyelectromusic@users.noreply.github.com>
10 months ago
bool SetNewPerformanceBank(unsigned nBankID);
void SetFirstPerformance(void);
void DoSetFirstPerformance(void);
bool SavePerformanceNewFile ();
bool DoSavePerformanceNewFile (void);
bool DoSetNewPerformance (void);
Performance file handling (#581) Implements #580 * Initial update in performance file handling. This change makes the 6-digit number in the filename indicate a performance "voice number" in MiniDexed. The external filename numbers will now match any Program Change messages using the common MIDI concept of user selecting 1..128 whilst internally they are treated as 0..127. Note: in the case of performances, performance 1 (index 0) is the Default "performance.ini" file for backwards compatibility. Also note that in this version, new performances, when saved, cannot occupy free slots between other performances - they are added to the end. Even though the filename standard gives 6 digit numbers, the actual number of performances is still limited to 256. * Start of subdirectory implementation for performance banks. * Initial version with performance banks, selectable over MIDI only. * Initial implementation of performance bank switching in the UI menu. * Remove debug information, fix few bugs, including PgmUpDown handling and performance numbers out of range. * Bugfixes for legacy cases when no performance directory exists plus some extra checks for saving and deleting performances. * Remove verbose debug options (doh!) * Fix a minor off-by-one error found in review. * Bugfix - removed redundant legacy check that results in out of order performance files being skipped on load. * Fix bug in MIDI button handling commands. * Fix for issue where wrong performance is selected [L] on new save. * Suggested update to UI to show bank/performance numbers. * Make performance bank select asynchronous to MIDI and UI to stop corruptions on loading performances. * Fix an assert that should be a run-time test. * Ensure bank selection works when PCCH is not enabled, and that UI remains consistent when changing banks. --------- Co-authored-by: Kevin <68612569+diyelectromusic@users.noreply.github.com>
10 months ago
bool DoSetNewPerformanceBank (void);
bool GetPerformanceSelectToLoad(void);
bool SavePerformance (bool bSaveAsDeault);
unsigned GetPerformanceSelectChannel (void);
void SetPerformanceSelectChannel (unsigned uCh);
Performance file handling (#581) Implements #580 * Initial update in performance file handling. This change makes the 6-digit number in the filename indicate a performance "voice number" in MiniDexed. The external filename numbers will now match any Program Change messages using the common MIDI concept of user selecting 1..128 whilst internally they are treated as 0..127. Note: in the case of performances, performance 1 (index 0) is the Default "performance.ini" file for backwards compatibility. Also note that in this version, new performances, when saved, cannot occupy free slots between other performances - they are added to the end. Even though the filename standard gives 6 digit numbers, the actual number of performances is still limited to 256. * Start of subdirectory implementation for performance banks. * Initial version with performance banks, selectable over MIDI only. * Initial implementation of performance bank switching in the UI menu. * Remove debug information, fix few bugs, including PgmUpDown handling and performance numbers out of range. * Bugfixes for legacy cases when no performance directory exists plus some extra checks for saving and deleting performances. * Remove verbose debug options (doh!) * Fix a minor off-by-one error found in review. * Bugfix - removed redundant legacy check that results in out of order performance files being skipped on load. * Fix bug in MIDI button handling commands. * Fix for issue where wrong performance is selected [L] on new save. * Suggested update to UI to show bank/performance numbers. * Make performance bank select asynchronous to MIDI and UI to stop corruptions on loading performances. * Fix an assert that should be a run-time test. * Ensure bank selection works when PCCH is not enabled, and that UI remains consistent when changing banks. --------- Co-authored-by: Kevin <68612569+diyelectromusic@users.noreply.github.com>
10 months ago
bool IsValidPerformance(unsigned nID);
bool IsValidPerformanceBank(unsigned nBankID);
// Must match the order in CUIMenu::TParameter
enum TParameter
{
ParameterCompressorEnable,
ParameterReverbEnable,
ParameterReverbSize,
ParameterReverbHighDamp,
ParameterReverbLowDamp,
ParameterReverbLowPass,
ParameterReverbDiffusion,
ParameterReverbLevel,
ParameterPerformanceSelectChannel,
Performance file handling (#581) Implements #580 * Initial update in performance file handling. This change makes the 6-digit number in the filename indicate a performance "voice number" in MiniDexed. The external filename numbers will now match any Program Change messages using the common MIDI concept of user selecting 1..128 whilst internally they are treated as 0..127. Note: in the case of performances, performance 1 (index 0) is the Default "performance.ini" file for backwards compatibility. Also note that in this version, new performances, when saved, cannot occupy free slots between other performances - they are added to the end. Even though the filename standard gives 6 digit numbers, the actual number of performances is still limited to 256. * Start of subdirectory implementation for performance banks. * Initial version with performance banks, selectable over MIDI only. * Initial implementation of performance bank switching in the UI menu. * Remove debug information, fix few bugs, including PgmUpDown handling and performance numbers out of range. * Bugfixes for legacy cases when no performance directory exists plus some extra checks for saving and deleting performances. * Remove verbose debug options (doh!) * Fix a minor off-by-one error found in review. * Bugfix - removed redundant legacy check that results in out of order performance files being skipped on load. * Fix bug in MIDI button handling commands. * Fix for issue where wrong performance is selected [L] on new save. * Suggested update to UI to show bank/performance numbers. * Make performance bank select asynchronous to MIDI and UI to stop corruptions on loading performances. * Fix an assert that should be a run-time test. * Ensure bank selection works when PCCH is not enabled, and that UI remains consistent when changing banks. --------- Co-authored-by: Kevin <68612569+diyelectromusic@users.noreply.github.com>
10 months ago
ParameterPerformanceBank,
ParameterUnknown
};
void SetParameter (TParameter Parameter, int nValue);
int GetParameter (TParameter Parameter);
std::string GetNewPerformanceDefaultName(void);
void SetNewPerformanceName(std::string nName);
void SetVoiceName (std::string VoiceName, unsigned nTG);
bool DeletePerformance(unsigned nID);
bool DoDeletePerformance(void);
// Must match the order in CUIMenu::TGParameter
enum TTGParameter
{
TGParameterVoiceBank,
TGParameterVoiceBankMSB,
TGParameterVoiceBankLSB,
TGParameterProgram,
TGParameterVolume,
TGParameterPan,
TGParameterMasterTune,
TGParameterCutoff,
TGParameterResonance,
TGParameterMIDIChannel,
TGParameterReverbSend,
TGParameterPitchBendRange,
TGParameterPitchBendStep,
TGParameterPortamentoMode,
TGParameterPortamentoGlissando,
TGParameterPortamentoTime,
TGParameterMonoMode,
TGParameterMWRange,
TGParameterMWPitch,
TGParameterMWAmplitude,
TGParameterMWEGBias,
TGParameterFCRange,
TGParameterFCPitch,
TGParameterFCAmplitude,
TGParameterFCEGBias,
TGParameterBCRange,
TGParameterBCPitch,
TGParameterBCAmplitude,
TGParameterBCEGBias,
TGParameterATRange,
TGParameterATPitch,
TGParameterATAmplitude,
TGParameterATEGBias,
TGParameterUnknown
};
void SetTGParameter (TTGParameter Parameter, int nValue, unsigned nTG);
int GetTGParameter (TTGParameter Parameter, unsigned nTG);
// access (global or OP-related) parameter of the active voice of a TG
static const unsigned NoOP = 6; // for global parameters
void SetVoiceParameter (uint8_t uchOffset, uint8_t uchValue, unsigned nOP, unsigned nTG);
uint8_t GetVoiceParameter (uint8_t uchOffset, unsigned nOP, unsigned nTG);
std::string GetVoiceName (unsigned nTG);
bool SavePerformance (void);
bool DoSavePerformance (void);
void setMasterVolume (float32_t vol);
private:
int16_t ApplyNoteLimits (int16_t pitch, unsigned nTG); // returns < 0 to ignore note
uint8_t m_uchOPMask[CConfig::AllToneGenerators];
void LoadPerformanceParameters(void);
void ProcessSound (void);
#ifdef ARM_ALLOW_MULTI_CORE
enum TCoreStatus
{
CoreStatusInit,
CoreStatusIdle,
CoreStatusBusy,
CoreStatusExit,
CoreStatusUnknown
};
#endif
Restructure code and add new features (#37) * Make synth parameters configurable * Add class CConfig, which holds the configuration * Add template config file minidexed.ini * Register panic handler in CKernel to allow to display assertions * Fix: Performance timer did not show correct percent value with HDMI * Add class CDexedAdapter Some Dexed methods require to be guarded from being interrupted by other Dexed calls. This is done in the class CDexedAdapter. * Add class CUserInterface The user interface should be implemented here. As a start it supports showing the program number and name on the LCD display. The LCD output is buffered, so that LCD writes from an IRQ handler are possible. * Move MIDI handling from CMiniDexed to specific classes * CMIDIDevice is the generic MIDI handler * CMIDIKeyboard handles USB audio class MIDI devices * CSerialMIDIDevice handles the serial MIDI device * Now all MIDI inputs can work simultaneous * Program change and bank select work with serial MIDI * Add headers to all files * Include voices.c in sysexfileloader.cpp * Cleanup Makefile * Support headless operation on Raspberry Pi 4 Some code cleanup for src/kernel.* * Code cleanup for src/minidexed.* Move implementation of constructors to minidexed.cpp Reorder member variables * Support multiple USB MIDI inputs at once * Maximum 2 inputs on Raspberry Pi 1-3 * Maximum 4 inputs on Raspberry Pi 4 * Suppress frequent messages in MIDI dump * Use minidexed.txt * Document `SoundDevice` in `minidexed.ini` Co-authored-by: probonopd <probonopd@users.noreply.github.com>
3 years ago
private:
CConfig *m_pConfig;
int m_nParameter[ParameterUnknown]; // global (non-TG) parameters
unsigned m_nToneGenerators;
unsigned m_nPolyphony;
CDexedAdapter *m_pTG[CConfig::AllToneGenerators];
unsigned m_nVoiceBankID[CConfig::AllToneGenerators];
unsigned m_nVoiceBankIDMSB[CConfig::AllToneGenerators];
Performance file handling (#581) Implements #580 * Initial update in performance file handling. This change makes the 6-digit number in the filename indicate a performance "voice number" in MiniDexed. The external filename numbers will now match any Program Change messages using the common MIDI concept of user selecting 1..128 whilst internally they are treated as 0..127. Note: in the case of performances, performance 1 (index 0) is the Default "performance.ini" file for backwards compatibility. Also note that in this version, new performances, when saved, cannot occupy free slots between other performances - they are added to the end. Even though the filename standard gives 6 digit numbers, the actual number of performances is still limited to 256. * Start of subdirectory implementation for performance banks. * Initial version with performance banks, selectable over MIDI only. * Initial implementation of performance bank switching in the UI menu. * Remove debug information, fix few bugs, including PgmUpDown handling and performance numbers out of range. * Bugfixes for legacy cases when no performance directory exists plus some extra checks for saving and deleting performances. * Remove verbose debug options (doh!) * Fix a minor off-by-one error found in review. * Bugfix - removed redundant legacy check that results in out of order performance files being skipped on load. * Fix bug in MIDI button handling commands. * Fix for issue where wrong performance is selected [L] on new save. * Suggested update to UI to show bank/performance numbers. * Make performance bank select asynchronous to MIDI and UI to stop corruptions on loading performances. * Fix an assert that should be a run-time test. * Ensure bank selection works when PCCH is not enabled, and that UI remains consistent when changing banks. --------- Co-authored-by: Kevin <68612569+diyelectromusic@users.noreply.github.com>
10 months ago
unsigned m_nVoiceBankIDPerformance;
unsigned m_nVoiceBankIDMSBPerformance;
unsigned m_nProgram[CConfig::AllToneGenerators];
unsigned m_nVolume[CConfig::AllToneGenerators];
unsigned m_nPan[CConfig::AllToneGenerators];
int m_nMasterTune[CConfig::AllToneGenerators];
int m_nCutoff[CConfig::AllToneGenerators];
int m_nResonance[CConfig::AllToneGenerators];
unsigned m_nMIDIChannel[CConfig::AllToneGenerators];
unsigned m_nPitchBendRange[CConfig::AllToneGenerators];
unsigned m_nPitchBendStep[CConfig::AllToneGenerators];
unsigned m_nPortamentoMode[CConfig::AllToneGenerators];
unsigned m_nPortamentoGlissando[CConfig::AllToneGenerators];
unsigned m_nPortamentoTime[CConfig::AllToneGenerators];
bool m_bMonoMode[CConfig::AllToneGenerators];
unsigned m_nModulationWheelRange[CConfig::AllToneGenerators];
unsigned m_nModulationWheelTarget[CConfig::AllToneGenerators];
unsigned m_nFootControlRange[CConfig::AllToneGenerators];
unsigned m_nFootControlTarget[CConfig::AllToneGenerators];
unsigned m_nBreathControlRange[CConfig::AllToneGenerators];
unsigned m_nBreathControlTarget[CConfig::AllToneGenerators];
unsigned m_nAftertouchRange[CConfig::AllToneGenerators];
unsigned m_nAftertouchTarget[CConfig::AllToneGenerators];
unsigned m_nNoteLimitLow[CConfig::AllToneGenerators];
unsigned m_nNoteLimitHigh[CConfig::AllToneGenerators];
int m_nNoteShift[CConfig::AllToneGenerators];
unsigned m_nReverbSend[CConfig::AllToneGenerators];
uint8_t m_nRawVoiceData[156];
float32_t nMasterVolume;
Restructure code and add new features (#37) * Make synth parameters configurable * Add class CConfig, which holds the configuration * Add template config file minidexed.ini * Register panic handler in CKernel to allow to display assertions * Fix: Performance timer did not show correct percent value with HDMI * Add class CDexedAdapter Some Dexed methods require to be guarded from being interrupted by other Dexed calls. This is done in the class CDexedAdapter. * Add class CUserInterface The user interface should be implemented here. As a start it supports showing the program number and name on the LCD display. The LCD output is buffered, so that LCD writes from an IRQ handler are possible. * Move MIDI handling from CMiniDexed to specific classes * CMIDIDevice is the generic MIDI handler * CMIDIKeyboard handles USB audio class MIDI devices * CSerialMIDIDevice handles the serial MIDI device * Now all MIDI inputs can work simultaneous * Program change and bank select work with serial MIDI * Add headers to all files * Include voices.c in sysexfileloader.cpp * Cleanup Makefile * Support headless operation on Raspberry Pi 4 Some code cleanup for src/kernel.* * Code cleanup for src/minidexed.* Move implementation of constructors to minidexed.cpp Reorder member variables * Support multiple USB MIDI inputs at once * Maximum 2 inputs on Raspberry Pi 1-3 * Maximum 4 inputs on Raspberry Pi 4 * Suppress frequent messages in MIDI dump * Use minidexed.txt * Document `SoundDevice` in `minidexed.ini` Co-authored-by: probonopd <probonopd@users.noreply.github.com>
3 years ago
CUserInterface m_UI;
CSysExFileLoader m_SysExFileLoader;
CPerformanceConfig m_PerformanceConfig;
Restructure code and add new features (#37) * Make synth parameters configurable * Add class CConfig, which holds the configuration * Add template config file minidexed.ini * Register panic handler in CKernel to allow to display assertions * Fix: Performance timer did not show correct percent value with HDMI * Add class CDexedAdapter Some Dexed methods require to be guarded from being interrupted by other Dexed calls. This is done in the class CDexedAdapter. * Add class CUserInterface The user interface should be implemented here. As a start it supports showing the program number and name on the LCD display. The LCD output is buffered, so that LCD writes from an IRQ handler are possible. * Move MIDI handling from CMiniDexed to specific classes * CMIDIDevice is the generic MIDI handler * CMIDIKeyboard handles USB audio class MIDI devices * CSerialMIDIDevice handles the serial MIDI device * Now all MIDI inputs can work simultaneous * Program change and bank select work with serial MIDI * Add headers to all files * Include voices.c in sysexfileloader.cpp * Cleanup Makefile * Support headless operation on Raspberry Pi 4 Some code cleanup for src/kernel.* * Code cleanup for src/minidexed.* Move implementation of constructors to minidexed.cpp Reorder member variables * Support multiple USB MIDI inputs at once * Maximum 2 inputs on Raspberry Pi 1-3 * Maximum 4 inputs on Raspberry Pi 4 * Suppress frequent messages in MIDI dump * Use minidexed.txt * Document `SoundDevice` in `minidexed.ini` Co-authored-by: probonopd <probonopd@users.noreply.github.com>
3 years ago
CMIDIKeyboard *m_pMIDIKeyboard[CConfig::MaxUSBMIDIDevices];
CPCKeyboard m_PCKeyboard;
CSerialMIDIDevice m_SerialMIDI;
bool m_bUseSerial;
bool m_bQuadDAC8Chan;
Restructure code and add new features (#37) * Make synth parameters configurable * Add class CConfig, which holds the configuration * Add template config file minidexed.ini * Register panic handler in CKernel to allow to display assertions * Fix: Performance timer did not show correct percent value with HDMI * Add class CDexedAdapter Some Dexed methods require to be guarded from being interrupted by other Dexed calls. This is done in the class CDexedAdapter. * Add class CUserInterface The user interface should be implemented here. As a start it supports showing the program number and name on the LCD display. The LCD output is buffered, so that LCD writes from an IRQ handler are possible. * Move MIDI handling from CMiniDexed to specific classes * CMIDIDevice is the generic MIDI handler * CMIDIKeyboard handles USB audio class MIDI devices * CSerialMIDIDevice handles the serial MIDI device * Now all MIDI inputs can work simultaneous * Program change and bank select work with serial MIDI * Add headers to all files * Include voices.c in sysexfileloader.cpp * Cleanup Makefile * Support headless operation on Raspberry Pi 4 Some code cleanup for src/kernel.* * Code cleanup for src/minidexed.* Move implementation of constructors to minidexed.cpp Reorder member variables * Support multiple USB MIDI inputs at once * Maximum 2 inputs on Raspberry Pi 1-3 * Maximum 4 inputs on Raspberry Pi 4 * Suppress frequent messages in MIDI dump * Use minidexed.txt * Document `SoundDevice` in `minidexed.ini` Co-authored-by: probonopd <probonopd@users.noreply.github.com>
3 years ago
CSoundBaseDevice *m_pSoundDevice;
bool m_bChannelsSwapped;
unsigned m_nQueueSizeFrames;
#ifdef ARM_ALLOW_MULTI_CORE
// unsigned m_nActiveTGsLog2;
volatile TCoreStatus m_CoreStatus[CORES];
volatile unsigned m_nFramesToProcess;
float32_t m_OutputLevel[CConfig::AllToneGenerators][CConfig::MaxChunkSize];
#endif
Restructure code and add new features (#37) * Make synth parameters configurable * Add class CConfig, which holds the configuration * Add template config file minidexed.ini * Register panic handler in CKernel to allow to display assertions * Fix: Performance timer did not show correct percent value with HDMI * Add class CDexedAdapter Some Dexed methods require to be guarded from being interrupted by other Dexed calls. This is done in the class CDexedAdapter. * Add class CUserInterface The user interface should be implemented here. As a start it supports showing the program number and name on the LCD display. The LCD output is buffered, so that LCD writes from an IRQ handler are possible. * Move MIDI handling from CMiniDexed to specific classes * CMIDIDevice is the generic MIDI handler * CMIDIKeyboard handles USB audio class MIDI devices * CSerialMIDIDevice handles the serial MIDI device * Now all MIDI inputs can work simultaneous * Program change and bank select work with serial MIDI * Add headers to all files * Include voices.c in sysexfileloader.cpp * Cleanup Makefile * Support headless operation on Raspberry Pi 4 Some code cleanup for src/kernel.* * Code cleanup for src/minidexed.* Move implementation of constructors to minidexed.cpp Reorder member variables * Support multiple USB MIDI inputs at once * Maximum 2 inputs on Raspberry Pi 1-3 * Maximum 4 inputs on Raspberry Pi 4 * Suppress frequent messages in MIDI dump * Use minidexed.txt * Document `SoundDevice` in `minidexed.ini` Co-authored-by: probonopd <probonopd@users.noreply.github.com>
3 years ago
CPerformanceTimer m_GetChunkTimer;
bool m_bProfileEnabled;
AudioEffectPlateReverb* reverb;
AudioStereoMixer<CConfig::AllToneGenerators>* tg_mixer;
AudioStereoMixer<CConfig::AllToneGenerators>* reverb_send_mixer;
CSpinLock m_ReverbSpinLock;
bool m_bSavePerformance;
bool m_bSavePerformanceNewFile;
bool m_bSetNewPerformance;
unsigned m_nSetNewPerformanceID;
Performance file handling (#581) Implements #580 * Initial update in performance file handling. This change makes the 6-digit number in the filename indicate a performance "voice number" in MiniDexed. The external filename numbers will now match any Program Change messages using the common MIDI concept of user selecting 1..128 whilst internally they are treated as 0..127. Note: in the case of performances, performance 1 (index 0) is the Default "performance.ini" file for backwards compatibility. Also note that in this version, new performances, when saved, cannot occupy free slots between other performances - they are added to the end. Even though the filename standard gives 6 digit numbers, the actual number of performances is still limited to 256. * Start of subdirectory implementation for performance banks. * Initial version with performance banks, selectable over MIDI only. * Initial implementation of performance bank switching in the UI menu. * Remove debug information, fix few bugs, including PgmUpDown handling and performance numbers out of range. * Bugfixes for legacy cases when no performance directory exists plus some extra checks for saving and deleting performances. * Remove verbose debug options (doh!) * Fix a minor off-by-one error found in review. * Bugfix - removed redundant legacy check that results in out of order performance files being skipped on load. * Fix bug in MIDI button handling commands. * Fix for issue where wrong performance is selected [L] on new save. * Suggested update to UI to show bank/performance numbers. * Make performance bank select asynchronous to MIDI and UI to stop corruptions on loading performances. * Fix an assert that should be a run-time test. * Ensure bank selection works when PCCH is not enabled, and that UI remains consistent when changing banks. --------- Co-authored-by: Kevin <68612569+diyelectromusic@users.noreply.github.com>
10 months ago
bool m_bSetNewPerformanceBank;
unsigned m_nSetNewPerformanceBankID;
bool m_bSetFirstPerformance;
bool m_bDeletePerformance;
unsigned m_nDeletePerformanceID;
bool m_bLoadPerformanceBusy;
Performance file handling (#581) Implements #580 * Initial update in performance file handling. This change makes the 6-digit number in the filename indicate a performance "voice number" in MiniDexed. The external filename numbers will now match any Program Change messages using the common MIDI concept of user selecting 1..128 whilst internally they are treated as 0..127. Note: in the case of performances, performance 1 (index 0) is the Default "performance.ini" file for backwards compatibility. Also note that in this version, new performances, when saved, cannot occupy free slots between other performances - they are added to the end. Even though the filename standard gives 6 digit numbers, the actual number of performances is still limited to 256. * Start of subdirectory implementation for performance banks. * Initial version with performance banks, selectable over MIDI only. * Initial implementation of performance bank switching in the UI menu. * Remove debug information, fix few bugs, including PgmUpDown handling and performance numbers out of range. * Bugfixes for legacy cases when no performance directory exists plus some extra checks for saving and deleting performances. * Remove verbose debug options (doh!) * Fix a minor off-by-one error found in review. * Bugfix - removed redundant legacy check that results in out of order performance files being skipped on load. * Fix bug in MIDI button handling commands. * Fix for issue where wrong performance is selected [L] on new save. * Suggested update to UI to show bank/performance numbers. * Make performance bank select asynchronous to MIDI and UI to stop corruptions on loading performances. * Fix an assert that should be a run-time test. * Ensure bank selection works when PCCH is not enabled, and that UI remains consistent when changing banks. --------- Co-authored-by: Kevin <68612569+diyelectromusic@users.noreply.github.com>
10 months ago
bool m_bLoadPerformanceBankBusy;
bool m_bSaveAsDeault;
};
#endif