/*
   MicroMDAEPiano

   MicroMDAEPiano is a port of the MDA-EPiano sound engine
   (https://sourceforge.net/projects/mda-vst/) for the Teensy-3.5/3.6 with audio shield.

   (c)2019 H. Wirtz <wirtz@parasitstudio.de>

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software Foundation,
   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA
*/

#include "config.h"
#include <Audio.h>
#include <Wire.h>
#include <SPI.h>
#include <MIDI.h>
#include <EEPROM.h>
#include <limits.h>
#include "mdaEPiano.h"
#include "effect_dynamics.h"
#ifdef USE_XFADE_DATA
#include "mdaEPianoDataXfade.h"
#else
#include "mdaEPianoData.h"
#endif
#if defined(USBCON)
#include <midi_UsbTransport.h>
#endif
#ifdef USE_ONBOARD_USB_HOST
#include <USBHost_t36.h>
#endif
#include <Bounce.h>
#include <Encoder.h>
#include "LiquidCrystalPlus_I2C.h"

// [I2C] SCL: Pin 19, SDA: Pin 18 (https://www.pjrc.com/teensy/td_libs_Wire.html)
#define LCD_I2C_ADDRESS 0x27
#define LCD_CHARS 16
#define LCD_LINES 2
LiquidCrystalPlus_I2C lcd(LCD_I2C_ADDRESS, LCD_CHARS, LCD_LINES);
Encoder enc1(ENC1_PIN_A, ENC1_PIN_B);
Bounce but1 = Bounce(BUT1_PIN, 10);  // 10 ms debounce

// GUItool: begin automatically generated code
AudioPlayQueue       queue_r;         //xy=494,404
AudioPlayQueue       queue_l;         //xy=494,404
AudioAnalyzePeak         peak_r;          //xy=695,491
AudioAnalyzePeak         peak_l;          //xy=695,491
#ifdef USE_DYNAMICS
AudioEffectDynamics      dyna_r;
AudioEffectDynamics      dyna_l;
AudioConnection          patchCord2(queue_r, dyna_r);
AudioConnection          patchCord3(queue_l, dyna_l);
#endif
#ifdef TEENSY_AUDIO_BOARD
AudioOutputI2S           i2s1;           //xy=1072,364
#ifdef USE_DYNAMICS
AudioConnection          patchCord4(dyna_r, peak_r);
AudioConnection          patchCord5(dyna_l, peak_l);
AudioConnection          patchCord6(dyna_r, 0, i2s1, 0);
AudioConnection          patchCord7(dyna_l, 0, i2s1, 1);
#else
AudioConnection          patchCord4(queue_r, peak_r);
AudioConnection          patchCord5(queue_l, peak_l);
AudioConnection          patchCord6(queue_r, 0, i2s1, 0);
AudioConnection          patchCord7(queue_l, 0, i2s1, 1);
#endif
AudioControlSGTL5000     sgtl5000_1;     //xy=700,536
#else
AudioOutputPT8211        pt8211_1;       //xy=1079,320
AudioAmplifier           volume_r;           //xy=818,370
AudioAmplifier           volume_l;           //xy=818,411
#ifdef USE_DYNAMICS
AudioConnection          patchCord2(dyna_r, volume_r);
AudioConnection          patchCord3(dyna_l, volume_l);
#else
AudioConnection          patchCord2(queue_r, volume_r);
AudioConnection          patchCord3(queue_l, volume_l);
#endif
AudioConnection          patchCord4(volume_r, peak_r);
AudioConnection          patchCord5(volume_l, peak_l);
AudioConnection          patchCord6(volume_r, 0, pt8211_1, 1);
AudioConnection          patchCord7(volume_l, 0, pt8211_1, 0);
#endif
// GUItool: end automatically generated code

mdaEPiano* ep;
uint8_t midi_channel = DEFAULT_MIDI_CHANNEL;
uint32_t xrun = 0;
uint32_t overload = 0;
uint32_t peak = 0;
uint16_t render_time_max = 0;
float vol = VOLUME;
float vol_right = 1.0;
float vol_left = 1.0;
elapsedMicros fill_audio_buffer;
const uint16_t audio_block_time_us = 1000000 / (SAMPLE_RATE / AUDIO_BLOCK_SAMPLES);

#ifdef SHOW_CPU_LOAD_MSEC
elapsedMillis cpu_mem_millis;
#endif

#ifdef MIDI_DEVICE
MIDI_CREATE_INSTANCE(HardwareSerial, MIDI_DEVICE, midi_serial);
#endif
#ifdef USE_ONBOARD_USB_HOST
USBHost usb_host;
MIDIDevice midi_usb(usb_host);
#endif
#if defined(USBCON)
static const unsigned sUsbTransportBufferSize = 16;
typedef midi::UsbTransport<sUsbTransportBufferSize> UsbTransport;
UsbTransport sUsbTransport;
MIDI_CREATE_INSTANCE(UsbTransport, sUsbTransport, midi_onboard_usb);
#endif

#ifdef TEST_NOTE
IntervalTimer sched_note_on;
IntervalTimer sched_note_off;
uint8_t _voice_counter = 0;
#endif

enum MDA_EP_PARAM { DECAY, RELEASE, HARDNESS, TREBLE, PAN_TREM, LFO_RATE, VELOCITY_SENSE, STEREO, MAX_POLY, TUNE, DETUNE, OVERDRIVE };

void setup()
{
  //while (!Serial) ; // wait for Arduino Serial Monitor
  Serial.begin(SERIAL_SPEED);
  delay(220);
  lcd.init();
  lcd.blink_off();
  lcd.cursor_off();
  lcd.backlight();
  lcd.noAutoscroll();
  lcd.clear();
  lcd.display();
  lcd.show(0, 0, 20, " MicroMDAEPiano");
  lcd.show(1, 0, 16, "(c)parasiTstudio");
  enc1.write(INITIAL_ENC1_VALUE);

  Serial.println(F("MicroMDAEPiano based on https://sourceforge.net/projects/mda-vst"));
  Serial.println(F("(c)2018 H. Wirtz <wirtz@parasitstudio.de>"));
  Serial.println(F("https://about.teahub.io/dcoredump/MicroMDAEpiano"));
  Serial.print(F("Data in PROGMEM: "));
  Serial.print(sizeof(epianoDataXfade), DEC);
  Serial.println(F(" bytes"));
  Serial.println();
  Serial.println(F("<setup start>"));

  ep = new mdaEPiano();

  initial_values_from_eeprom();

  // start up USB host
#ifdef USE_ONBOARD_USB_HOST
  usb_host.begin();
  Serial.println(F("USB-MIDI enabled."));
#endif

  // check for onboard USB-MIDI
#if defined(USBCON)
  midi_onboard_usb.begin();
  Serial.println(F("Onboard USB-MIDI enabled."));
#endif

#ifdef MIDI_DEVICE
  // Start serial MIDI
  midi_serial.begin(DEFAULT_MIDI_CHANNEL);
  Serial.println(F("Serial MIDI enabled"));
#endif

  // start audio card
  AudioMemory(AUDIO_MEM);

#ifdef TEENSY_AUDIO_BOARD
  sgtl5000_1.enable();
  //sgtl5000_1.dacVolumeRamp();
  sgtl5000_1.dacVolumeRampLinear();
  sgtl5000_1.unmuteHeadphone();
  sgtl5000_1.unmuteLineout();
  sgtl5000_1.autoVolumeDisable(); // turn off AGC
  sgtl5000_1.volume(1.0, 1.0);
#endif

  //set_volume(vol, vol_left, vol_right);
  set_volume(1.0, 1.0, 1.0);

#if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
  // Initialize processor and memory measurements
  AudioProcessorUsageMaxReset();
  AudioMemoryUsageMaxReset();
#endif

  Serial.print(F("AUDIO_BLOCK_SAMPLES="));
  Serial.print(AUDIO_BLOCK_SAMPLES);
  Serial.print(F(" (Time per block="));
  Serial.print(1000000 / (SAMPLE_RATE / AUDIO_BLOCK_SAMPLES));
  Serial.println(F("ms)"));

#ifdef TEST_NOTE
  Serial.println(F("MIDI test enabled"));
  sched_note_on.begin(note_on, 2000000);
  sched_note_off.begin(note_off, 6333333);
#endif

  ep->setParameter(DECAY, 0.5);
  ep->setParameter(RELEASE, 0.5);
  ep->setParameter(HARDNESS, 0.7);
  ep->setParameter(TREBLE, 0.85);
  ep->setParameter(DETUNE, 0.1);
  ep->setParameter(VELOCITY_SENSE, 1.0);
  ep->setParameter(STEREO, 0.7);
  ep->setParameter(MAX_POLY, 1.0);
  ep->setParameter(OVERDRIVE, 0.3);

  // DECAY,RELEASE,HARDNESS,TREBLE,PAN_TREM,LFO_RATE,VELOCIT

#ifdef USE_DYNAMICS
  //dyna_r.limit();
  //dyna_l.limit();
  dyna_r.compression(-10.0, MIN_T, MIN_T, 20.0, 2.0);
  dyna_l.compression(-10.0, MIN_T, MIN_T, 20.0, 2.0);
#endif

  Serial.println(F("<setup end>"));
  lcd.show(1, 0, 16, "");

#if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
  show_cpu_and_mem_usage();
  cpu_mem_millis = 0;
#endif
}

void loop()
{
  int16_t* audio_buffer_r; // pointer to AUDIO_BLOCK_SAMPLES * sizeof(int16_t)
  int16_t* audio_buffer_l; // pointer to AUDIO_BLOCK_SAMPLES * sizeof(int16_t)
  const uint16_t audio_block_time_ms = 1000000 / (SAMPLE_RATE / AUDIO_BLOCK_SAMPLES);

  // Main sound calculation
  if (queue_r.available() && queue_l.available() && fill_audio_buffer > audio_block_time_us - 10)
  {
    fill_audio_buffer = 0;

#if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
    if (cpu_mem_millis > SHOW_CPU_LOAD_MSEC)
    {
      show_cpu_and_mem_usage();
      cpu_mem_millis = 0;
    }
#endif

    audio_buffer_r = queue_r.getBuffer();
    if (audio_buffer_r == NULL)
    {
      Serial.println(F("E: audio_buffer_r allocation problems!"));
    }
    audio_buffer_l = queue_l.getBuffer();
    if (audio_buffer_l == NULL)
    {
      Serial.println(F("E: audio_buffer_l allocation problems!"));
    }

    elapsedMicros t1;
    ep->process(audio_buffer_l, audio_buffer_r);
    uint32_t t2 = t1;
    if (t2 > audio_block_time_ms) // everything greater 2.9ms is a buffer underrun!
      xrun++;
    if (t2 > render_time_max)
      render_time_max = t2;
    if (peak_r.available())
    {
      if (peak_r.read() > 1.00)
        peak++;
    }
    if (peak_l.available())
    {
      if (peak_l.read() > 1.00)
        peak++;
    }

#ifndef TEENSY_AUDIO_BOARD
    for (uint8_t i = 0; i < AUDIO_BLOCK_SAMPLES; i++)
    {
      audio_buffer_r[i] *= vol;
      audio_buffer_l[i] *= vol;
    }
#endif
    queue_r.playBuffer();
    queue_l.playBuffer();
  }

  handle_input();
}

void handle_input(void)
{
#ifdef USE_ONBOARD_USB_HOST
  usb_host.Task();
  while (midi_usb.read())
  {
#ifdef DEBUG
    Serial.println(F("[MIDI-USB]"));
#endif
    /* if (midi_usb.getType() >= 0xf0) // SysEX
      {
      handle_sysex_parameter(midi_usb.getSysExArray(), midi_usb.getSysExArrayLength());
      }
      else */ if (queue_midi_event(midi_usb.getType(), midi_usb.getData1(), midi_usb.getData2()))
      return;
  }
#endif
#ifdef MIDI_DEVICE
  while (midi_serial.read())
  {
#ifdef DEBUG
    Serial.print(F("[MIDI-Serial] "));
#endif
    /* if (midi_serial.getType() >= 0xf0) // SYSEX
      {
      handle_sysex_parameter(midi_serial.getSysExArray(), midi_serial.getSysExArrayLength());
      }
      else */ if (queue_midi_event(midi_serial.getType(), midi_serial.getData1(), midi_serial.getData2()))
      return;
  }
#endif

  int enc1_val = enc1.read();

  if (but1.update())
    ;
  // place handling of encoder and showing values on lcd here

}

#ifdef DEBUG
#ifdef SHOW_MIDI_EVENT
void print_midi_event(uint8_t type, uint8_t data1, uint8_t data2)
{
  Serial.print(F("MIDI-Channel: "));
  if (midi_channel == MIDI_CHANNEL_OMNI)
    Serial.print(F("OMNI"));
  else
    Serial.print(midi_channel, DEC);
  Serial.print(F(", MIDI event type: 0x"));
  if (type < 16)
    Serial.print(F("0"));
  Serial.print(type, HEX);
  Serial.print(F(", data1: "));
  Serial.print(data1, DEC);
  Serial.print(F(", data2: "));
  Serial.println(data2, DEC);
}
#endif
#endif

bool queue_midi_event(uint8_t type, uint8_t data1, uint8_t data2)
{
  bool ret = false;

#if defined(DEBUG) && defined(SHOW_MIDI_EVENT)
  print_midi_event(type, data1, data2);
#endif

  // check for MIDI channel
  if (midi_channel != MIDI_CHANNEL_OMNI)
  {
    uint8_t c = type & 0x0f;
    if (c != midi_channel)
    {
#ifdef DEBUG
      Serial.print(F("Ignoring MIDI data on channel "));
      Serial.print(c);
      Serial.print(F("(listening on "));
      Serial.print(midi_channel);
      Serial.println(F(")"));
#endif
      return (false);
    }
  }

  // now throw away the MIDI channel information
  type &= 0xf0;

  ret = ep->processMidiMessage(type, data1, data2);

  return (ret);
}

void set_volume(float v, float vr, float vl)
{
  vol = v;
  vol_right = vr;
  vol_left = vl;

  EEPROM.update(EEPROM_OFFSET + EEPROM_MASTER_VOLUME_ADDR, uint8_t(vol * UCHAR_MAX));
  EEPROM.update(EEPROM_OFFSET + EEPROM_VOLUME_RIGHT_ADDR, uint8_t(vol_right * UCHAR_MAX));
  EEPROM.update(EEPROM_OFFSET + EEPROM_VOLUME_LEFT_ADDR, uint8_t(vol_left * UCHAR_MAX));
  update_eeprom_checksum();

#ifdef DEBUG
  uint8_t tmp;
  Serial.print(F("Setting volume: VOL="));
  Serial.print(v, DEC);
  Serial.print(F("["));
  tmp = EEPROM.read(EEPROM_OFFSET + EEPROM_MASTER_VOLUME_ADDR);
  Serial.print(tmp, DEC);
  Serial.print(F("/"));
  Serial.print(float(tmp) / UCHAR_MAX, DEC);
  Serial.print(F("] VOL_L="));
  Serial.print(vl, DEC);
  Serial.print(F("["));
  tmp = EEPROM.read(EEPROM_OFFSET + EEPROM_VOLUME_LEFT_ADDR);
  Serial.print(tmp, DEC);
  Serial.print(F("/"));
  Serial.print(float(tmp) / UCHAR_MAX, DEC);
  Serial.print(F("] VOL_R="));
  Serial.print(vr, DEC);
  Serial.print(F("["));
  tmp = EEPROM.read(EEPROM_OFFSET + EEPROM_VOLUME_RIGHT_ADDR);
  Serial.print(tmp, DEC);
  Serial.print(F("/"));
  Serial.print(float(tmp) / UCHAR_MAX, DEC);
  Serial.println(F("]"));
#endif

#ifdef TEENSY_AUDIO_BOARD
  sgtl5000_1.dacVolume(vol * vol_left, vol * vol_right);
#else
  volume_r.gain(vr);
  volume_l.gain(vl);
#endif
}

void initial_values_from_eeprom(void)
{
  uint32_t crc_eeprom = read_eeprom_checksum();
  uint32_t crc = eeprom_crc32(EEPROM_OFFSET, EEPROM_DATA_LENGTH);

#ifdef DEBUG
  Serial.print(F("EEPROM checksum: 0x"));
  Serial.print(crc_eeprom, HEX);
  Serial.print(F(" / 0x"));
  Serial.print(crc, HEX);
#endif
  if (crc_eeprom != crc)
  {
#ifdef DEBUG
    Serial.print(F(" - mismatch -> initializing EEPROM!"));
#endif
    EEPROM.update(EEPROM_OFFSET + EEPROM_MASTER_VOLUME_ADDR, uint8_t(vol * UCHAR_MAX));
    EEPROM.update(EEPROM_OFFSET + EEPROM_VOLUME_RIGHT_ADDR, uint8_t(vol_right * UCHAR_MAX));
    EEPROM.update(EEPROM_OFFSET + EEPROM_VOLUME_LEFT_ADDR, uint8_t(vol_left * UCHAR_MAX));
    update_eeprom_checksum();
  }
  else
  {
    vol = float(EEPROM.read(EEPROM_OFFSET + EEPROM_MASTER_VOLUME_ADDR)) / UCHAR_MAX;
    vol_right = float(EEPROM.read(EEPROM_OFFSET + EEPROM_VOLUME_RIGHT_ADDR)) / UCHAR_MAX;
    vol_left = float(EEPROM.read(EEPROM_OFFSET + EEPROM_VOLUME_LEFT_ADDR)) / UCHAR_MAX;
  }
#ifdef DEBUG
  Serial.println();
#endif
}

uint32_t read_eeprom_checksum(void)
{
  return (EEPROM.read(EEPROM_CRC32_ADDR) << 24 | EEPROM.read(EEPROM_CRC32_ADDR + 1) << 16 | EEPROM.read(EEPROM_CRC32_ADDR + 2) << 8 | EEPROM.read(EEPROM_CRC32_ADDR + 3));
}

void update_eeprom_checksum(void)
{
  write_eeprom_checksum(eeprom_crc32(EEPROM_OFFSET, EEPROM_DATA_LENGTH)); // recalculate crc and write to eeprom
}

void write_eeprom_checksum(uint32_t crc)
{
  EEPROM.update(EEPROM_CRC32_ADDR, (crc & 0xff000000) >> 24);
  EEPROM.update(EEPROM_CRC32_ADDR + 1, (crc & 0x00ff0000) >> 16);
  EEPROM.update(EEPROM_CRC32_ADDR + 2, (crc & 0x0000ff00) >> 8);
  EEPROM.update(EEPROM_CRC32_ADDR + 3, crc & 0x000000ff);
}

uint32_t eeprom_crc32(uint16_t calc_start, uint16_t calc_bytes) // base code from https://www.arduino.cc/en/Tutorial/EEPROMCrc
{
  const uint32_t crc_table[16] =
  {
    0x00000000, 0x1db71064, 0x3b6e20c8, 0x26d930ac,
    0x76dc4190, 0x6b6b51f4, 0x4db26158, 0x5005713c,
    0xedb88320, 0xf00f9344, 0xd6d6a3e8, 0xcb61b38c,
    0x9b64c2b0, 0x86d3d2d4, 0xa00ae278, 0xbdbdf21c
  };
  uint32_t crc = ~0L;

  if (calc_start + calc_bytes > EEPROM.length())
    calc_bytes = EEPROM.length() - calc_start;

  for (uint16_t index = calc_start ; index < (calc_start + calc_bytes) ; ++index)
  {
    crc = crc_table[(crc ^ EEPROM[index]) & 0x0f] ^ (crc >> 4);
    crc = crc_table[(crc ^ (EEPROM[index] >> 4)) & 0x0f] ^ (crc >> 4);
    crc = ~crc;
  }

  return (crc);
}

#if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
void show_cpu_and_mem_usage(void)
{
  Serial.print(F("CPU: "));
  Serial.print(AudioProcessorUsage(), DEC);
  Serial.print(F("   CPU MAX: "));
  Serial.print(AudioProcessorUsageMax(), DEC);
  Serial.print(F("  MEM: "));
  Serial.print(AudioMemoryUsage(), DEC);
  Serial.print(F("   MEM MAX: "));
  Serial.print(AudioMemoryUsageMax(), DEC);
  Serial.print(F("   RENDER_TIME_MAX: "));
  Serial.print(render_time_max, DEC);
  Serial.print(F("   XRUN: "));
  Serial.print(xrun, DEC);
  Serial.print(F("   OVERLOAD: "));
  Serial.print(overload, DEC);
  Serial.print(F("   PEAK: "));
  Serial.print(peak, DEC);
  Serial.println();
  AudioProcessorUsageMaxReset();
  AudioMemoryUsageMaxReset();
  render_time_max = 0;
}
#endif


#ifdef TEST_NOTE
void note_on(void)
{
  randomSeed(analogRead(A0));
  queue_midi_event(0x90, TEST_NOTE, random(TEST_VEL_MIN, TEST_VEL_MAX));           // 1
  queue_midi_event(0x90, TEST_NOTE + 5, random(TEST_VEL_MIN, TEST_VEL_MAX));       // 2
  queue_midi_event(0x90, TEST_NOTE + 8, random(TEST_VEL_MIN, TEST_VEL_MAX));       // 3
  queue_midi_event(0x90, TEST_NOTE + 12, random(TEST_VEL_MIN, TEST_VEL_MAX));      // 4
  queue_midi_event(0x90, TEST_NOTE + 17, random(TEST_VEL_MIN, TEST_VEL_MAX));      // 5
  queue_midi_event(0x90, TEST_NOTE + 20, random(TEST_VEL_MIN, TEST_VEL_MAX));      // 6
  queue_midi_event(0x90, TEST_NOTE + 24, random(TEST_VEL_MIN, TEST_VEL_MAX));      // 7
  queue_midi_event(0x90, TEST_NOTE + 29, random(TEST_VEL_MIN, TEST_VEL_MAX));      // 8
  queue_midi_event(0x90, TEST_NOTE + 32, random(TEST_VEL_MIN, TEST_VEL_MAX));      // 9
  queue_midi_event(0x90, TEST_NOTE + 37, random(TEST_VEL_MIN, TEST_VEL_MAX));      // 10
  queue_midi_event(0x90, TEST_NOTE + 40, random(TEST_VEL_MIN, TEST_VEL_MAX));      // 11
  queue_midi_event(0x90, TEST_NOTE + 46, random(TEST_VEL_MIN, TEST_VEL_MAX));      // 12
  queue_midi_event(0x90, TEST_NOTE + 49, random(TEST_VEL_MIN, TEST_VEL_MAX));      // 13
  queue_midi_event(0x90, TEST_NOTE + 52, random(TEST_VEL_MIN, TEST_VEL_MAX));      // 14
  queue_midi_event(0x90, TEST_NOTE + 57, random(TEST_VEL_MIN, TEST_VEL_MAX));      // 15
  queue_midi_event(0x90, TEST_NOTE + 60, random(TEST_VEL_MIN, TEST_VEL_MAX));      // 16
}

void note_off(void)
{
  queue_midi_event(0x80, TEST_NOTE, 0);           // 1
  queue_midi_event(0x80, TEST_NOTE + 5, 0);       // 2
  queue_midi_event(0x80, TEST_NOTE + 8, 0);       // 3
  queue_midi_event(0x80, TEST_NOTE + 12, 0);      // 4
  queue_midi_event(0x80, TEST_NOTE + 17, 0);      // 5
  queue_midi_event(0x80, TEST_NOTE + 20, 0);      // 6
  queue_midi_event(0x80, TEST_NOTE + 24, 0);      // 7
  queue_midi_event(0x80, TEST_NOTE + 29, 0);      // 8
  queue_midi_event(0x80, TEST_NOTE + 32, 0);      // 9
  queue_midi_event(0x80, TEST_NOTE + 37, 0);      // 10
  queue_midi_event(0x80, TEST_NOTE + 40, 0);      // 11
  queue_midi_event(0x80, TEST_NOTE + 46, 0);      // 12
  queue_midi_event(0x80, TEST_NOTE + 49, 0);      // 13
  queue_midi_event(0x80, TEST_NOTE + 52, 0);      // 14
  queue_midi_event(0x80, TEST_NOTE + 57, 0);      // 15
  queue_midi_event(0x80, TEST_NOTE + 60, 0);      // 16
}
#endif