wirtz
/
MicroMDAEPiano
mirror of https://codeberg.org/dcoredump/MicroMDAEPiano.git
1
0
Fork 0
Code Issues Releases Wiki Activity

Several fixes (especially for paramter changing).

Browse Source
master
Holger Wirtz 6 years ago
parent ca47f6852a
commit a41fc72926
5 changed files with 51 additions and 66 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 20
      MicroMDAEPiano.ino
  2. 61
      UI.hpp
  3. 18
      config.h
  4. 4
      mdaEPiano.cpp
  5. 4
      mdaEPiano.h

20
MicroMDAEPiano.ino
Unescape View File

@ -166,6 +166,7 @@ void setup()
// create EPiano object // create EPiano object
ep = new mdaEPiano(); ep = new mdaEPiano();
set_complete_configuration();
// read initial EEPROM variables // read initial EEPROM variables
initial_values_from_eeprom(); initial_values_from_eeprom();
@ -179,31 +180,14 @@ void setup()
sgtl5000_1.enable(); sgtl5000_1.enable();
sgtl5000_1.dacVolumeRamp(); sgtl5000_1.dacVolumeRamp();
sgtl5000_1.dacVolume(1.0); sgtl5000_1.dacVolume(1.0);
//sgtl5000_1.dacVolumeRampLinear();
sgtl5000_1.unmuteHeadphone(); sgtl5000_1.unmuteHeadphone();
sgtl5000_1.volume(0.5, 0.5); // Headphone volume sgtl5000_1.volume(0.5, 0.5); // Headphone volume
sgtl5000_1.unmuteLineout(); sgtl5000_1.unmuteLineout();
//sgtl5000_1.autoVolumeDisable(); // turn off AGC
sgtl5000_1.lineOutLevel(SGTL5000_LINEOUT_LEVEL); sgtl5000_1.lineOutLevel(SGTL5000_LINEOUT_LEVEL);
sgtl5000_1.audioPostProcessorEnable(); sgtl5000_1.audioPostProcessorEnable();
sgtl5000_1.eqSelect(TONE_CONTROLS); sgtl5000_1.eqSelect(TONE_CONTROLS);
//sgtl5000_1.autoVolumeControl(1, 1, 1, 0.9, 0.01, 0.05);
sgtl5000_1.autoVolumeEnable(); sgtl5000_1.autoVolumeEnable();
//sgtl5000_1.surroundSoundEnable();
//sgtl5000_1.surroundSound(7, 3); // Configures virtual surround width from 0 (mono) to 7 (widest). select may be set to 1 (disable), 2 (mono input) or 3 (stereo input).
sgtl5000_1.enhanceBassEnable(); sgtl5000_1.enhanceBassEnable();
//sgtl5000_1.enhanceBass(1.0, 0.2, 1, 2); // Configures the bass enhancement by setting the levels of the original stereo signal and the bass-enhanced mono level which will be mixed together. The high-pass filter may be enabled (0) or bypassed (1).
/* The cutoff frequency is specified as follows:
value frequency
0 80Hz
1 100Hz
2 125Hz
3 150Hz
4 175Hz
5 200Hz
6 225Hz
*/
//sgtl5000_1.eqBands(bass, mid_bass, midrange, mid_treble, treble);
Serial.println(F("Teensy-Audio-Board enabled.")); Serial.println(F("Teensy-Audio-Board enabled."));
#elif defined(TGA_AUDIO_BOARD) #elif defined(TGA_AUDIO_BOARD)
wm8731_1.enable(); wm8731_1.enable();
@ -227,7 +211,7 @@ void setup()
Serial.print(audio_block_time_us); Serial.print(audio_block_time_us);
Serial.println(F("ms)")); Serial.println(F("ms)"));
set_complete_configuration();
AudioInterrupts(); AudioInterrupts();

61
UI.hpp
Unescape View File

@ -107,9 +107,9 @@ extern float _loudness;
/****************************************** /******************************************
TEXT GETTER FUCTIONS TEXT GETTER FUCTIONS
******************************************/ ******************************************/
const char comp_gain_value_text1[] PROGMEM = " 0 dB"; char comp_gain_value_text1[] = " 0 dB";
const char comp_gain_value_text2[] PROGMEM = "+ 6 dB"; char comp_gain_value_text2[] = "+ 6 dB";
const char comp_gain_value_text3[] PROGMEM = "+12 dB"; char comp_gain_value_text3[] = "+12 dB";
char* get_comp_gain_value_text(void) char* get_comp_gain_value_text(void)
{ {
switch (configuration.comp_gain) switch (configuration.comp_gain)
@ -127,10 +127,10 @@ char* get_comp_gain_value_text(void)
return ('\0'); return ('\0');
} }
const char comp_response_value_text1[] PROGMEM = " 0 ms"; char comp_response_value_text1[] = " 0 ms";
const char comp_response_value_text2[] PROGMEM = " 25 ms"; char comp_response_value_text2[] = " 25 ms";
const char comp_response_value_text3[] PROGMEM = " 50 ms"; char comp_response_value_text3[] = " 50 ms";
const char comp_response_value_text4[] PROGMEM = "100 ms"; char comp_response_value_text4[] = "100 ms";
char* get_comp_response_value_text(void) char* get_comp_response_value_text(void)
{ {
switch (configuration.comp_response) switch (configuration.comp_response)
@ -151,20 +151,14 @@ char* get_comp_response_value_text(void)
return ('\0'); return ('\0');
} }
const char comp_limit_value_text1[] PROGMEM = "soft Knee"; char comp_limit_value_text1[] = "soft Knee";
const char comp_limit_value_text2[] PROGMEM = "hard Knee"; char comp_limit_value_text2[] = "hard Knee";
char* get_comp_limit_value_text(void) char* get_comp_limit_value_text(void)
{ {
switch (configuration.comp_limit) if (configuration.comp_limit == false)
{
case false:
return (comp_limit_value_text1); return (comp_limit_value_text1);
break; else
case true:
return (comp_limit_value_text2); return (comp_limit_value_text2);
break;
}
return ('\0');
} }
char comp_threshold_value_text1[] = " "; char comp_threshold_value_text1[] = " ";
@ -1813,7 +1807,7 @@ void set_comp_gain(uint8_t value)
Serial.println(value); Serial.println(value);
#endif #endif
float tmp = mapfloat(float(value), ENC_COMP_GAIN_MIN, ENC_COMP_GAIN_MAX, 0.0, 1.0); float tmp = mapfloat(float(value), ENC_COMP_GAIN_MIN, ENC_COMP_GAIN_MAX, 0.0, 1.0);
sgtl5000_1.autoVolumeControl(tmp, configuration.comp_response, configuration.comp_limit, (float)configuration.comp_threshold, (float)configuration.comp_attack, (float)configuration.comp_decay); // maxGain, response, hardLimit, threshold, attack, decay, e.g.: 1, 1, 1, 0.9, 0.01, 0.05 sgtl5000_1.autoVolumeControl(tmp, configuration.comp_response, configuration.comp_limit, (float)configuration.comp_threshold, (float)configuration.comp_attack / 10, (float)configuration.comp_decay / 10); // maxGain, response, hardLimit, threshold, attack, decay, e.g.: 1, 1, 1, 0.9, 0.01, 0.05
configuration.comp_gain = value; configuration.comp_gain = value;
} }
@ -1824,7 +1818,7 @@ void set_comp_response(uint8_t value)
Serial.println(value); Serial.println(value);
#endif #endif
float tmp = mapfloat(float(value), ENC_COMP_RESPONSE_MIN, ENC_COMP_RESPONSE_MAX, 0.0, 1.0); float tmp = mapfloat(float(value), ENC_COMP_RESPONSE_MIN, ENC_COMP_RESPONSE_MAX, 0.0, 1.0);
sgtl5000_1.autoVolumeControl(configuration.comp_gain, tmp, configuration.comp_limit, (float)configuration.comp_threshold, (float)configuration.comp_attack, (float)configuration.comp_decay); // maxGain, response, hardLimit, threshold, attack, decay, e.g.: 1, 1, 1, 0.9, 0.01, 0.05 sgtl5000_1.autoVolumeControl(configuration.comp_gain, tmp, configuration.comp_limit, (float)configuration.comp_threshold, (float)configuration.comp_attack / 10, (float)configuration.comp_decay / 10); // maxGain, response, hardLimit, threshold, attack, decay, e.g.: 1, 1, 1, 0.9, 0.01, 0.05
configuration.comp_response = value; configuration.comp_response = value;
} }
@ -1835,7 +1829,7 @@ void set_comp_limit(uint8_t value)
Serial.println(value); Serial.println(value);
#endif #endif
float tmp = mapfloat(float(value), ENC_COMP_LIMIT_MIN, ENC_COMP_LIMIT_MAX, 0.0, 1.0); float tmp = mapfloat(float(value), ENC_COMP_LIMIT_MIN, ENC_COMP_LIMIT_MAX, 0.0, 1.0);
sgtl5000_1.autoVolumeControl(configuration.comp_gain, configuration.comp_response, tmp, (float)configuration.comp_threshold, (float)configuration.comp_attack, (float)configuration.comp_decay); // maxGain, response, hardLimit, threshold, attack, decay, e.g.: 1, 1, 1, 0.9, 0.01, 0.05 sgtl5000_1.autoVolumeControl(configuration.comp_gain, configuration.comp_response, tmp, (float)configuration.comp_threshold, (float)configuration.comp_attack / 10, (float)configuration.comp_decay / 10); // maxGain, response, hardLimit, threshold, attack, decay, e.g.: 1, 1, 1, 0.9, 0.01, 0.05
configuration.comp_limit = value; configuration.comp_limit = value;
} }
@ -1846,7 +1840,7 @@ void set_comp_threshold(uint8_t value)
Serial.println(value); Serial.println(value);
#endif #endif
//float tmp = mapfloat(float(value), ENC_COMP_THRESHOLD_MIN, ENC_COMP_THRESHOLD_MAX, 0.0, 1.0); //float tmp = mapfloat(float(value), ENC_COMP_THRESHOLD_MIN, ENC_COMP_THRESHOLD_MAX, 0.0, 1.0);
sgtl5000_1.autoVolumeControl(configuration.comp_gain, configuration.comp_response, configuration.comp_limit, (float)value, (float)configuration.comp_attack, (float)configuration.comp_decay); // maxGain, response, hardLimit, threshold, attack, decay, e.g.: 1, 1, 1, 0.9, 0.01, 0.05 sgtl5000_1.autoVolumeControl(configuration.comp_gain, configuration.comp_response, configuration.comp_limit, (float)value, (float)configuration.comp_attack / 10, (float)configuration.comp_decay / 10); // maxGain, response, hardLimit, threshold, attack, decay, e.g.: 1, 1, 1, 0.9, 0.01, 0.05
configuration.comp_threshold = value; configuration.comp_threshold = value;
} }
@ -1857,7 +1851,7 @@ void set_comp_attack(uint8_t value)
Serial.println(value); Serial.println(value);
#endif #endif
//float tmp = mapfloat(float(value), ENC_COMP_ATTACK_MIN, ENC_COMP_ATTACK_MAX, 0.0, 1.0); //float tmp = mapfloat(float(value), ENC_COMP_ATTACK_MIN, ENC_COMP_ATTACK_MAX, 0.0, 1.0);
sgtl5000_1.autoVolumeControl(configuration.comp_gain, configuration.comp_response, configuration.comp_limit, (float)configuration.comp_threshold, (float)value / 10, (float)configuration.comp_decay); // maxGain, response, hardLimit, threshold, attack, decay, e.g.: 1, 1, 1, 0.9, 0.01, 0.05 sgtl5000_1.autoVolumeControl(configuration.comp_gain, configuration.comp_response, configuration.comp_limit, (float)configuration.comp_threshold, (float)value / 10, (float)configuration.comp_decay / 10); // maxGain, response, hardLimit, threshold, attack, decay, e.g.: 1, 1, 1, 0.9, 0.01, 0.05
configuration.comp_attack = value; configuration.comp_attack = value;
} }
@ -1868,7 +1862,7 @@ void set_comp_decay(uint8_t value)
Serial.println(value); Serial.println(value);
#endif #endif
//float tmp = mapfloat(float(value), ENC_COMP_DECAY_MIN, ENC_COMP_DECAY_MAX, 0.0, 1.0); //float tmp = mapfloat(float(value), ENC_COMP_DECAY_MIN, ENC_COMP_DECAY_MAX, 0.0, 1.0);
sgtl5000_1.autoVolumeControl(configuration.comp_gain, configuration.comp_response, configuration.comp_limit, (float)configuration.comp_threshold, (float)configuration.comp_attack, (float)value / 10); // maxGain, response, hardLimit, threshold, attack, decay, e.g.: 1, 1, 1, 0.9, 0.01, 0.05 sgtl5000_1.autoVolumeControl(configuration.comp_gain, configuration.comp_response, configuration.comp_limit, (float)configuration.comp_threshold, (float)configuration.comp_attack / 10, (float)value / 10); // maxGain, response, hardLimit, threshold, attack, decay, e.g.: 1, 1, 1, 0.9, 0.01, 0.05
configuration.comp_decay = value; configuration.comp_decay = value;
} }
@ -1951,19 +1945,22 @@ void set_bass_lr_level(uint8_t value)
Serial.print(F("Set BASS_LR_LEVEL ")); Serial.print(F("Set BASS_LR_LEVEL "));
Serial.println(value); Serial.println(value);
#endif #endif
float tmp = mapfloat(float(value), ENC_BASS_LR_LEVEL_MIN, ENC_BASS_LR_LEVEL_MAX, 0.0, 1.0); float tmp1 = mapfloat(float(value), ENC_BASS_LR_LEVEL_MIN, ENC_BASS_LR_LEVEL_MAX, 0.0, 1.0);
sgtl5000_1.enhanceBass(tmp, configuration.bass_mono_level); float tmp2 = mapfloat(float(configuration.bass_mono_level), ENC_BASS_MONO_LEVEL_MIN, ENC_BASS_MONO_LEVEL_MAX, 0.0, 1.0);
sgtl5000_1.enhanceBass(tmp1, tmp2);
configuration.bass_lr_level = value; configuration.bass_lr_level = value;
} }
void set_bass_mono_level(uint8_t value) void set_bass_mono_level(uint8_t value)
{ {
#ifdef DEBUG #ifdef DEBUG
Serial.print(F("Set BASS_MONO_LEVEL ")); Serial.print(F("Set BASS_MONO_LEVEL "));
Serial.println(value); Serial.println(value);
#endif #endif
float tmp = mapfloat(float(value), ENC_BASS_MONO_LEVEL_MIN, ENC_BASS_MONO_LEVEL_MAX, 0.0, 1.0); float tmp1 = mapfloat(float(configuration.bass_lr_level), ENC_BASS_LR_LEVEL_MIN, ENC_BASS_LR_LEVEL_MAX, 0.0, 1.0);
sgtl5000_1.enhanceBass(configuration.bass_mono_level, tmp); float tmp2 = mapfloat(float(value), ENC_BASS_MONO_LEVEL_MIN, ENC_BASS_MONO_LEVEL_MAX, 0.0, 1.0);
sgtl5000_1.enhanceBass(tmp1, tmp2);
configuration.bass_mono_level = value; configuration.bass_mono_level = value;
} }
@ -1973,8 +1970,9 @@ void set_eq_bass(uint8_t value)
Serial.print(F("Set EQ_BASS ")); Serial.print(F("Set EQ_BASS "));
Serial.println(value); Serial.println(value);
#endif #endif
float tmp = mapfloat(float(value), ENC_EQ_BASS_MIN, ENC_EQ_BASS_MAX, 0.0, 1.0); float tmp1 = mapfloat(float(value), ENC_EQ_BASS_MIN, ENC_EQ_BASS_MAX, -1.0, 1.0);
sgtl5000_1.eqBands(tmp, configuration.eq_treble); float tmp2 = mapfloat(float(configuration.eq_treble), ENC_EQ_TREBLE_MIN, ENC_EQ_TREBLE_MAX, -1.0, 1.0);
sgtl5000_1.eqBands(tmp1, tmp2);
configuration.eq_bass = value; configuration.eq_bass = value;
} }
@ -1984,8 +1982,9 @@ void set_eq_treble(uint8_t value)
Serial.print(F("Set EQ_TREBLE ")); Serial.print(F("Set EQ_TREBLE "));
Serial.println(value); Serial.println(value);
#endif #endif
float tmp = mapfloat(float(value), ENC_EQ_TREBLE_MIN, ENC_EQ_TREBLE_MAX, 0.0, 1.0); float tmp1 = mapfloat(float(configuration.eq_bass), ENC_EQ_BASS_MIN, ENC_EQ_BASS_MAX, -1.0, 1.0);
sgtl5000_1.eqBands(configuration.eq_bass, tmp); float tmp2 = mapfloat(float(value), ENC_EQ_TREBLE_MIN, ENC_EQ_TREBLE_MAX, -1.0, 1.0);
sgtl5000_1.eqBands(tmp1, tmp2);
configuration.eq_treble = value; configuration.eq_treble = value;
} }

18
config.h
Unescape View File

@ -240,13 +240,13 @@
#define ENC_BASS_MONO_LEVEL_MAX 99 #define ENC_BASS_MONO_LEVEL_MAX 99
#define ENC_BASS_MONO_LEVEL_DEFAULT 0 #define ENC_BASS_MONO_LEVEL_DEFAULT 0
// //
#define ENC_EQ_BASS_MIN 0 #define ENC_EQ_BASS_MIN -50
#define ENC_EQ_BASS_MAX 99 #define ENC_EQ_BASS_MAX 50
#define ENC_EQ_BASS_DEFAULT 50 #define ENC_EQ_BASS_DEFAULT 0
// //
#define ENC_EQ_TREBLE_MIN 0 #define ENC_EQ_TREBLE_MIN -50
#define ENC_EQ_TREBLE_MAX 99 #define ENC_EQ_TREBLE_MAX 50
#define ENC_EQ_TREBLE_DEFAULT 50 #define ENC_EQ_TREBLE_DEFAULT 0
// //
#define ENC_LOUDNESS_MIN 0 #define ENC_LOUDNESS_MIN 0
#define ENC_LOUDNESS_MAX 99 #define ENC_LOUDNESS_MAX 99
@ -335,11 +335,11 @@ struct config_t {
uint8_t chorus_level; uint8_t chorus_level;
uint8_t bass_lr_level; uint8_t bass_lr_level;
uint8_t bass_mono_level; uint8_t bass_mono_level;
uint8_t eq_bass; int8_t eq_bass;
uint8_t eq_treble; int8_t eq_treble;
uint8_t loudness; uint8_t loudness;
uint8_t midi_channel; uint8_t midi_channel;
uint8_t midi_soft_thru; bool midi_soft_thru;
uint8_t max_poly; uint8_t max_poly;
int8_t pan; int8_t pan;
}; };

4
mdaEPiano.cpp
Unescape View File

@ -53,6 +53,7 @@ mdaEPiano::mdaEPiano() // mdaEPiano::mdaEPiano(audioMasterCallback audioMaster)
setProgram(0); setProgram(0);
} }
*/ */
fillpatch(0, "Default", 0.500f, 0.500f, 0.500f, 0.500f, 0.500f, 0.650f, 0.250f, 0.500f, 1.0f, 0.500f, 0.146f, 0.000f);
waves = (short*)epianoDataXfade; waves = (short*)epianoDataXfade;
@ -181,7 +182,7 @@ void mdaEPiano::setParameter(int32_t index, float value)
update(); update();
} }
/*
void mdaEPiano::fillpatch(int32_t p, char *name, float p0, float p1, float p2, float p3, float p4, void mdaEPiano::fillpatch(int32_t p, char *name, float p0, float p1, float p2, float p3, float p4,
float p5, float p6, float p7, float p8, float p9, float p10, float p11) float p5, float p6, float p7, float p8, float p9, float p10, float p11)
{ {
@ -194,6 +195,7 @@ void mdaEPiano::setParameter(int32_t index, float value)
programs[p].param[10] = p10; programs[p].param[11] = p11; programs[p].param[10] = p10; programs[p].param[11] = p11;
} }
/*
float mdaEPiano::getParameter(int32_t index) { float mdaEPiano::getParameter(int32_t index) {
return programs[curProgram].param[index]; return programs[curProgram].param[index];
} }

4
mdaEPiano.h
Unescape View File

@ -94,8 +94,8 @@ class mdaEPiano
private: private:
void update(); //my parameter update void update(); //my parameter update
/* void fillpatch(int32_t p, char *name, float p0, float p1, float p2, float p3, float p4, void fillpatch(int32_t p, char *name, float p0, float p1, float p2, float p3, float p4,
float p5, float p6, float p7, float p8, float p9, float p10, float p11); */ float p5, float p6, float p7, float p8, float p9, float p10, float p11);
mdaEPianoProgram* programs; mdaEPianoProgram* programs;
float Fs, iFs; float Fs, iFs;

Write Preview
Loading…
Cancel
Save