Several small fixes.

MicroMDAEPiano.ino

@@ -130,7 +130,7 @@ config_t configuration = {
   ENC_REVERB_LEVEL_DEFAULT,             // reverb_level
   ENC_CHORUS_FREQUENCY_DEFAULT,         // chorus_frequency
   ENC_CHORUS_DELAY_DEFAULT,             // chorus_delay
-  ENC_CHORUS_INTENSITY_DEFAULT,             // chorus_intensity
+  ENC_CHORUS_INTENSITY_DEFAULT,          // chorus_intensity
   ENC_CHORUS_LEVEL_DEFAULT,             // chorus_level
   ENC_BASS_LR_LEVEL_DEFAULT,            // bass_lr_level
   ENC_BASS_MONO_LEVEL_DEFAULT,          // bass_mono_level
@@ -153,8 +153,6 @@ elapsedMillis eeprom_master_volume_update_timer;
 elapsedMillis cpu_mem_millis;
 #endif
 
-// Number of samples in each delay line
-#define CHORUS_DELAY_LENGTH (16*AUDIO_BLOCK_SAMPLES)
 // Allocate the delay lines for left and right channels
 short l_delayline[CHORUS_DELAY_LENGTH];
 short r_delayline[CHORUS_DELAY_LENGTH];
@@ -215,8 +213,13 @@ void setup()
   Serial.println(F("PT8211 enabled."));
 #endif
 
+  // set master volume
   set_master_volume(master_volume);
-
+  
+  // internal mixing of original signal(0), reverb(1) and chorus(2)
+  mixer_r.gain(0, 1.0);
+  mixer_l.gain(0, 1.0);
+  
 #if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
   // Initialize processor and memory measurements
   AudioProcessorUsageMaxReset();
@@ -241,7 +244,7 @@ void setup()
   // chorus modulation fixed
   memset(r_delayline, 0, sizeof(short)*CHORUS_DELAY_LENGTH);
   memset(l_delayline, 0, sizeof(short)*CHORUS_DELAY_LENGTH);
-  modulator.begin(WAVEFORM_TRIANGLE);
+  modulator.begin(CHORUS_WAVEFORM);
   modulator.amplitude(0.1);
   modulator.frequency(1.0);
   modulator.phase(0);
@@ -508,8 +511,8 @@ void set_master_volume(uint8_t value)
 
   // float v = (float)(a * (a + 2))/(float)(1 << 20); //  (pseudo-) logarithmic curve for volume control
   // http://files.csound-tutorial.net/floss_manual/Release03/Cs_FM_03_ScrapBook/b-panning-and-spatialization.html
-  mixer_r.gain(0, tmp3 * sinf(tmp2 * PI / 2));
-  mixer_l.gain(0, tmp3 * cosf(tmp2 * PI / 2));
+  volume_r.gain(tmp3 * sinf(tmp2 * PI / 2));
+  volume_l.gain(tmp3 * cosf(tmp2 * PI / 2));
 
   eeprom_master_volume_update_flag = true;
   eeprom_master_volume_update_timer = 0;

config.h

@@ -56,13 +56,15 @@
 //*************************************************************************************************
 
 #define VOLUME 0.8
-#define VOLUME_CURVE 0.07
 #define AUDIO_MEM 128
-#define SAMPLE_RATE 44100
+#define SAMPLE_RATE AUDIO_SAMPLE_RATE
 #define REDUCE_LOUDNESS 0
 #define USE_XFADE_DATA 1
-#define INTERPOLATION_WINDOW_SIZE 7 // For chorus, only odd numbers!
+// CHORUS parameters
+#define INTERPOLATION_WINDOW_SIZE 7 // For chorus, only odd numbers,please!
 #define INTERPOLATE CUBIC // LINEAR COSINE LAGRANGE QUADRATIC
+#define CHORUS_WAVEFORM WAVEFORM_TRIANGLE // WAVEFORM_SINEWAVEFORM_SAWTOOTH WAVEFORM_SAWTOOTH_REVERSE WAVEFORM_SQUARE WAVEFORM_TRIANGLE
+#define CHORUS_DELAY_LENGTH (16*AUDIO_BLOCK_SAMPLES)
 
 //*************************************************************************************************
 //* DEBUG OUTPUT SETTINGS
@@ -137,7 +139,7 @@
 //* DO NO CHANGE ANYTHING BEYOND IF YOU DON'T KNOW WHAT YOU ARE DOING !!!
 //*************************************************************************************************
 
-#define MICRO_MDAEPIANO_VERSION "0.9.1"
+#define MICRO_MDAEPIANO_VERSION "0.9.3"
 
 #define MAX_SOUNDS min(99,int((4096-EEPROM_CONFIGURATIONS)/sizeof(config_t)))
 
@@ -148,19 +150,19 @@
 // Encoder min/max values
 #define ENC_DECAY_MIN 0
 #define ENC_DECAY_MAX 99
-#define ENC_DECAY_DEFAULT 49
+#define ENC_DECAY_DEFAULT 50
 //
 #define ENC_RELEASE_MIN 0
 #define ENC_RELEASE_MAX 99
-#define ENC_RELEASE_DEFAULT 49
+#define ENC_RELEASE_DEFAULT 50
 //
 #define ENC_HARDNESS_MIN 0
 #define ENC_HARDNESS_MAX 99
-#define ENC_HARDNESS_DEFAULT 49
+#define ENC_HARDNESS_DEFAULT 50
 //
 #define ENC_TREBLE_MIN 0
 #define ENC_TREBLE_MAX 99
-#define ENC_TREBLE_DEFAULT 49
+#define ENC_TREBLE_DEFAULT 50
 //
 #define ENC_STEREO_MIN 0
 #define ENC_STEREO_MAX 99