Moved volume handling to internal configuration.

MicroMDAEPiano.ino

@@ -100,9 +100,6 @@ uint32_t xrun = 0;
 uint32_t overload = 0;
 uint32_t peak = 0;
 uint16_t render_time_max = 0;
-float vol = VOLUME;
-float vol_right = 1.0;
-float vol_left = 1.0;
 elapsedMicros fill_audio_buffer;
 elapsedMillis control_rate;
 elapsedMillis autostore;
@@ -197,7 +194,7 @@ void setup()
 #endif
 
   //set_volume(vol, vol_left, vol_right);
-  set_volume(1.0, 1.0, 1.0);
+  set_volume(1.0, 0.5);
 
 #if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
   // Initialize processor and memory measurements
@@ -293,14 +290,6 @@ void loop()
         peak++;
     }
 
-#ifndef TEENSY_AUDIO_BOARD
-    for (uint8_t i = 0; i < AUDIO_BLOCK_SAMPLES; i++)
-    {
-      audio_buffer_r[i] *= vol;
-      audio_buffer_l[i] *= vol;
-    }
-#endif
-
     queue_r.playBuffer();
     queue_l.playBuffer();
   }
@@ -311,13 +300,9 @@ void loop()
   if (control_rate > CONTROL_RATE_MS)
   {
     control_rate = 0;
-
-
-
   }
 }
 
-
 //*************************************************************************************************
 //* PROGRAM FUNCTIONS
 //*************************************************************************************************
@@ -446,9 +431,28 @@ bool checkMidiChannel(byte inChannel)
   return (true);
 }
 
-void set_volume(float v, float vr, float vl)
+void set_volume(float v, float p)
 {
-  ;
+  configuration.vol = v;
+  configuration.pan = p;
+
+#ifdef DEBUG
+  Serial.print(F("Setting volume: VOL="));
+  Serial.print(v, DEC);
+  Serial.print(F("["));
+  Serial.print(configuration.vol, DEC);
+  Serial.print(F("] PAN="));
+  Serial.print(F("["));
+  Serial.print(configuration.pan, DEC);
+  Serial.print(F("] "));
+  Serial.print(pow(configuration.vol * sinf(configuration.pan * PI / 2), VOLUME_CURVE), 3);
+  Serial.print(F("/"));
+  Serial.println(pow(configuration.vol * cosf( configuration.pan * PI / 2), VOLUME_CURVE), 3);
+#endif
+
+  // http://files.csound-tutorial.net/floss_manual/Release03/Cs_FM_03_ScrapBook/b-panning-and-spatialization.html
+  mixer_r.gain(0,sinf(p * PI / 2));
+  mixer_l.gain(0,cosf(p * PI / 2));
 }
 
 /******************************************************************************

config.h

@@ -41,7 +41,7 @@
 
 // AUDIO
 // If nothing is defined PT8211 is used as audio output device!
-//#define TEENSY_AUDIO_BOARD 1
+#define TEENSY_AUDIO_BOARD 1
 //#define TGA_AUDIO_BOARD 1
 
 //*************************************************************************************************
@@ -56,6 +56,7 @@
 //*************************************************************************************************
 
 #define VOLUME 0.8
+#define VOLUME_CURVE 0.07
 #define AUDIO_MEM 128
 #define SAMPLE_RATE 44100
 #define REDUCE_LOUDNESS 0
@@ -75,6 +76,7 @@
 //*************************************************************************************************
 
 // Teensy Audio Shield:
+#define SGTL5000_LINEOUT_LEVEL 29
 //#define SDCARD_CS_PIN    10
 //#define SDCARD_MOSI_PIN  7
 //#define SDCARD_SCK_PIN   14

mdaEPiano.cpp

@@ -240,8 +240,8 @@ void mdaEPiano::process(int16_t* outputs_r, int16_t* outputs_l)
       l = 1.0;
     else if (l < -1.0)
       l = -1.0;
-    outputs_l[frame] = static_cast<int16_t>(l * vol * 0x7fff) >> REDUCE_LOUDNESS;
-    outputs_r[frame] = static_cast<int16_t>(r * vol * 0x7fff) >> REDUCE_LOUDNESS;
+    outputs_l[frame] = static_cast<int16_t>(l * configuration.vol * 0x7fff) >> REDUCE_LOUDNESS;
+    outputs_r[frame] = static_cast<int16_t>(r * configuration.vol * 0x7fff) >> REDUCE_LOUDNESS;
   }
 
   if (fabs(tl) < 1.0e-10) tl = 0.0f; //anti-denormal

mdaEPiano.h

@@ -34,6 +34,8 @@
 #define SILENCE 0.0001f  //voice choking
 #define WAVELEN 422414   //wave data bytes
 
+extern config_t configuration;
+
 class mdaEPianoProgram
 {
     friend class mdaEPiano;