You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
5267 lines
174 KiB
5267 lines
174 KiB
/*
|
|
MicroDexed
|
|
|
|
MicroDexed is a port of the Dexed sound engine
|
|
(https://github.com/asb2m10/dexed) for the Teensy-3.5/3.6/4.x with audio shield.
|
|
Dexed ist heavily based on https://github.com/google/music-synthesizer-for-android
|
|
|
|
(c)2018-2020 H. Wirtz <wirtz@parasitstudio.de>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software Foundation,
|
|
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#ifdef ENABLE_LCD_UI
|
|
#ifndef _UI_HPP_
|
|
#define _UI_HPP_
|
|
|
|
#include "config.h"
|
|
#include "Disp_Plus.h"
|
|
#include "effect_modulated_delay.h"
|
|
#include "effect_stereo_mono.h"
|
|
#include "dexed.h"
|
|
|
|
#include <LCDMenuLib2.h>
|
|
//#include <Encoder.h>
|
|
#include <MD_REncoder.h>
|
|
|
|
#define _LCDML_DISP_cols LCD_cols
|
|
#define _LCDML_DISP_rows LCD_rows
|
|
|
|
#ifdef I2C_DISPLAY
|
|
#define _LCDML_DISP_cfg_cursor 0x7E // cursor Symbol
|
|
#else
|
|
#define _LCDML_DISP_cfg_cursor 0x8d // cursor Symbol
|
|
#endif
|
|
#define _LCDML_DISP_cfg_scrollbar 1 // enable a scrollbar
|
|
|
|
extern config_t configuration;
|
|
extern void set_volume(uint8_t v, uint8_t m);
|
|
extern bool load_sysex(uint8_t b, uint8_t v);
|
|
extern void generate_version_string(char* buffer, uint8_t len);
|
|
extern void initial_values_from_eeprom(bool init);
|
|
extern void _softRestart(void);
|
|
extern void eeprom_update_sys(void);
|
|
extern void eeprom_update_performance(void);
|
|
extern void eeprom_update_fx(void);
|
|
extern void eeprom_update_dexed(uint8_t instance_id);
|
|
extern float pseudo_log_curve(float value);
|
|
extern uint8_t selected_instance_id;
|
|
|
|
#ifdef DISPLAY_LCD_SPI
|
|
extern void change_disp_sd(bool d);
|
|
#endif
|
|
|
|
extern AudioSourceMicroDexed* MicroDexed[NUM_DEXED];
|
|
#if defined(USE_FX)
|
|
extern AudioSynthWaveform* chorus_modulator[NUM_DEXED];
|
|
extern AudioEffectModulatedDelay* modchorus[NUM_DEXED];
|
|
extern AudioMixer4* chorus_mixer[NUM_DEXED];
|
|
extern AudioMixer4* delay_fb_mixer[NUM_DEXED];
|
|
extern AudioEffectDelay* delay_fx[NUM_DEXED];
|
|
extern AudioMixer4* delay_mixer[NUM_DEXED];
|
|
#endif
|
|
extern AudioEffectMonoStereo* mono2stereo[NUM_DEXED];
|
|
|
|
extern AudioMixer4 microdexed_peak_mixer;
|
|
extern AudioAnalyzePeak microdexed_peak;
|
|
#if defined(USE_FX)
|
|
extern AudioMixer4 reverb_mixer_r;
|
|
extern AudioMixer4 reverb_mixer_l;
|
|
extern AudioEffectFreeverb freeverb_r;
|
|
extern AudioEffectFreeverb freeverb_l;
|
|
#endif
|
|
extern AudioMixer4 master_mixer_r;
|
|
extern AudioMixer4 master_mixer_l;
|
|
extern AudioEffectStereoMono stereo2mono;
|
|
extern AudioAnalyzePeak master_peak_r;
|
|
extern AudioAnalyzePeak master_peak_l;
|
|
|
|
extern char sd_string[LCD_cols + 1];
|
|
extern char g_voice_name[NUM_DEXED][VOICE_NAME_LEN];
|
|
extern char g_bank_name[NUM_DEXED][BANK_NAME_LEN];
|
|
|
|
/***********************************************************************
|
|
GLOBAL
|
|
************************************************************************/
|
|
elapsedMillis back_from_volume;
|
|
uint8_t instance_num[8][8];
|
|
|
|
#ifdef I2C_DISPLAY
|
|
#include <LiquidCrystal_I2C.h>
|
|
Disp_Plus<LiquidCrystal_I2C> lcd(LCD_I2C_ADDRESS, _LCDML_DISP_cols, _LCDML_DISP_rows);
|
|
#endif
|
|
|
|
#ifdef U8X8_DISPLAY
|
|
#include <U8x8lib.h>
|
|
#ifdef U8X8_HAVE_HW_SPI
|
|
#include <SPI.h>
|
|
#endif
|
|
#ifdef U8X8_HAVE_HW_I2C
|
|
#include <Wire.h>
|
|
#endif
|
|
Disp_Plus<U8X8_DISPLAY_CLASS> lcd(/* cs=*/ U8X8_CS_PIN, /* dc=*/ U8X8_DC_PIN, /* reset=*/ U8X8_RESET_PIN);
|
|
//Disp_Plus<U8X8_DISPLAY_CLASS> lcd(U8X8_PIN_NONE);
|
|
#endif
|
|
|
|
const uint8_t scroll_bar[5][8] = {
|
|
{B10001, B10001, B10001, B10001, B10001, B10001, B10001, B10001}, // scrollbar top
|
|
{B11111, B11111, B10001, B10001, B10001, B10001, B10001, B10001}, // scroll state 1
|
|
{B10001, B10001, B11111, B11111, B10001, B10001, B10001, B10001}, // scroll state 2
|
|
{B10001, B10001, B10001, B10001, B11111, B11111, B10001, B10001}, // scroll state 3
|
|
{B10001, B10001, B10001, B10001, B10001, B10001, B11111, B11111} // scrollbar bottom
|
|
};
|
|
|
|
const uint8_t block_bar[5][8] = {
|
|
{B10000, B10000, B10000, B10000, B10000, B10000, B10000, B10000},
|
|
{B11000, B11000, B11000, B11000, B11000, B11000, B11000, B11000},
|
|
{B11100, B11100, B11100, B11100, B11100, B11100, B11100, B11100},
|
|
{B11110, B11110, B11110, B11110, B11110, B11110, B11110, B11110},
|
|
{B11111, B11111, B11111, B11111, B11111, B11111, B11111, B11111}
|
|
};
|
|
|
|
const uint8_t meter_bar[5][8] = {
|
|
{B10000, B10000, B10000, B10000, B10000, B10000, B10000, B10000},
|
|
{B01000, B01000, B01000, B01000, B01000, B01000, B01000, B01000},
|
|
{B00100, B00100, B00100, B00100, B00100, B00100, B00100, B00100},
|
|
{B00010, B00010, B00010, B00010, B00010, B00010, B00010, B00010},
|
|
{B00001, B00001, B00001, B00001, B00001, B00001, B00001, B00001}
|
|
};
|
|
|
|
/*
|
|
const uint8_t block_bar[5][8] = {
|
|
{B00000, B10000, B10000, B10000, B10000, B10000, B10000, B00000},
|
|
{B00000, B11000, B11000, B11000, B11000, B11000, B11000, B00000},
|
|
{B00000, B11100, B11100, B11100, B11100, B11100, B11100, B00000},
|
|
{B00000, B11110, B11110, B11110, B11110, B11110, B11110, B00000},
|
|
{B00000, B11111, B11111, B11111, B11111, B11111, B11111, B00000}
|
|
};
|
|
|
|
const uint8_t meter_bar[5][8] = {
|
|
{B00000, B10000, B10000, B10000, B10000, B10000, B10000, B00000},
|
|
{B00000, B01000, B01000, B01000, B01000, B01000, B01000, B00000},
|
|
{B00000, B00100, B00100, B00100, B00100, B00100, B00100, B00000},
|
|
{B00000, B00010, B00010, B00010, B00010, B00010, B00010, B00000},
|
|
{B00000, B00001, B00001, B00001, B00001, B00001, B00001, B00000}
|
|
};
|
|
*/
|
|
|
|
const uint8_t special_chars[18][8] = {
|
|
{B11111, B11011, B10011, B11011, B11011, B11011, B11011, B11111}, // [0] 1 small invers
|
|
{B11111, B11011, B10101, B11101, B11011, B10111, B10001, B11111}, // [1] 2 small invers
|
|
{B11111, B11011, B10011, B11011, B11011, B11011, B11011, B11111}, // [2] 1 OP invers
|
|
{B11111, B11011, B10101, B11101, B11011, B10111, B10001, B11111}, // [3] 2 OP invers
|
|
{B11111, B10001, B11101, B11011, B11101, B10101, B11011, B11111}, // [4] 3 OP invers
|
|
{B11111, B10111, B10111, B10101, B10001, B11101, B11101, B11111}, // [5] 4 OP invers
|
|
{B11111, B10001, B10111, B10011, B11101, B11101, B10011, B11111}, // [6] 5 OP invers
|
|
{B11111, B11001, B10111, B10011, B10101, B10101, B11011, B11111}, // [7] 6 OP invers
|
|
{B00000, B00000, B00000, B00000, B00000, B00000, B00000, B11111}, // [8] Level 1
|
|
{B00000, B00000, B00000, B00000, B00000, B00000, B11111, B11111}, // [9] Level 2
|
|
{B00000, B00000, B00000, B00000, B00000, B11111, B11111, B11111}, // [10] Level 3
|
|
{B00000, B00000, B00000, B00000, B11111, B11111, B11111, B11111}, // [11] Level 4
|
|
{B00000, B00000, B00000, B11111, B11111, B11111, B11111, B11111}, // [12] Level 5
|
|
{B00000, B00000, B11111, B11111, B11111, B11111, B11111, B11111}, // [13] Level 6
|
|
{B00000, B11111, B11111, B11111, B11111, B11111, B11111, B11111}, // [14] Level 7
|
|
{B11111, B11111, B11111, B11111, B11111, B11111, B11111, B11111}, // [15] Level 8
|
|
{B00100, B00110, B00101, B00101, B01101, B11101, B11100, B11000}, // [16] Note
|
|
//{B01110, B10001, B10001, B11111, B11011, B11011, B11111, B00000} // [17] Disabled 2nd instance symbol
|
|
{B01110, B10001, B10001, B01110, B00100, B00100, B00110, B00110} // [17] Disabled 2nd instance symbol
|
|
};
|
|
|
|
enum { SCROLLBAR, BLOCKBAR, METERBAR };
|
|
enum { ENC_R, ENC_L };
|
|
enum {MENU_VOICE_BANK, MENU_VOICE_SOUND};
|
|
|
|
void lcdml_menu_display(void);
|
|
void lcdml_menu_clear(void);
|
|
void lcdml_menu_control(void);
|
|
#ifdef USE_FX
|
|
void UI_func_reverb_roomsize(uint8_t param);
|
|
void UI_func_reverb_damping(uint8_t param);
|
|
void UI_func_reverb_level(uint8_t param);
|
|
void UI_func_chorus_frequency(uint8_t param);
|
|
void UI_func_chorus_waveform(uint8_t param);
|
|
void UI_func_chorus_depth(uint8_t param);
|
|
void UI_func_chorus_level(uint8_t param);
|
|
void UI_func_delay_time(uint8_t param);
|
|
void UI_func_delay_feedback(uint8_t param);
|
|
void UI_func_delay_level(uint8_t param);
|
|
void UI_func_reverb_send(uint8_t param);
|
|
void UI_func_filter_cutoff(uint8_t param);
|
|
void UI_func_filter_resonance(uint8_t param);
|
|
#endif
|
|
void UI_func_transpose(uint8_t param);
|
|
void UI_func_tune(uint8_t param);
|
|
void UI_func_midi_channel(uint8_t param);
|
|
void UI_func_lowest_note(uint8_t param);
|
|
void UI_func_highest_note(uint8_t param);
|
|
void UI_func_sound_intensity(uint8_t param);
|
|
void UI_func_panorama(uint8_t param);
|
|
void UI_func_stereo_mono(uint8_t param);
|
|
void UI_func_note_refresh(uint8_t param);
|
|
void UI_func_polyphony(uint8_t param);
|
|
void UI_func_engine(uint8_t param);
|
|
void UI_func_mono_poly(uint8_t param);
|
|
void UI_func_pb_range(uint8_t param);
|
|
void UI_func_pb_step(uint8_t param);
|
|
void UI_func_mw_range(uint8_t param);
|
|
void UI_func_mw_assign(uint8_t param);
|
|
void UI_func_mw_mode(uint8_t param);
|
|
void UI_func_fc_range(uint8_t param);
|
|
void UI_func_fc_assign(uint8_t param);
|
|
void UI_func_fc_mode(uint8_t param);
|
|
void UI_func_bc_range(uint8_t param);
|
|
void UI_func_bc_assign(uint8_t param);
|
|
void UI_func_bc_mode(uint8_t param);
|
|
void UI_func_at_range(uint8_t param);
|
|
void UI_func_at_assign(uint8_t param);
|
|
void UI_func_at_mode(uint8_t param);
|
|
void UI_func_portamento_mode(uint8_t param);
|
|
void UI_func_portamento_glissando(uint8_t param);
|
|
void UI_func_portamento_time(uint8_t param);
|
|
void UI_handle_OP(uint8_t param);
|
|
void UI_func_information(uint8_t param);
|
|
void UI_func_volume(uint8_t param);
|
|
void UI_func_load_performance(uint8_t param);
|
|
void UI_func_save_performance(uint8_t param);
|
|
void UI_func_load_voiceconfig(uint8_t param);
|
|
void UI_func_save_voiceconfig(uint8_t param);
|
|
void UI_func_save_voice(uint8_t param);
|
|
void UI_func_load_fx(uint8_t param);
|
|
void UI_func_save_fx(uint8_t param);
|
|
void UI_func_eeprom_reset(uint8_t param);
|
|
void UI_func_midi_soft_thru(uint8_t param);
|
|
void UI_func_velocity_level(uint8_t param);
|
|
void UI_func_voice_select(uint8_t param);
|
|
void UI_func_sysex_send_voice(uint8_t param);
|
|
void UI_func_sysex_receive_voice(uint8_t param);
|
|
void UI_func_save_voice(uint8_t param);
|
|
void UI_func_sysex_receive_bank(uint8_t param);
|
|
void UI_func_sysex_send_bank(uint8_t param);
|
|
void UI_func_eq_bass(uint8_t param);
|
|
void UI_func_eq_treble(uint8_t param);
|
|
void UI_function_not_enabled(void);
|
|
void UI_function_not_implemented(uint8_t param);
|
|
void lcd_display_int(int16_t var, uint8_t size, bool zeros, bool brackets, bool sign);
|
|
void lcd_display_float(float var, uint8_t size_number, uint8_t size_fraction, bool zeros, bool brackets, bool sign);
|
|
void lcd_display_bar_int(const char* title, uint32_t value, float factor, int32_t min_value, int32_t max_value, uint8_t size, bool zeros, bool sign, bool init);
|
|
void lcd_display_bar_float(const char* title, float value, float factor, int32_t min_value, int32_t max_value, uint8_t size_number, uint8_t size_fraction, bool zeros, bool sign, bool init);
|
|
void lcd_display_meter_int(const char* title, uint32_t value, float factor, float offset, int32_t min_value, int32_t max_value, uint8_t size, bool zeros, bool sign, bool init);
|
|
void lcd_display_meter_float(const char* title, float value, float factor, float offset, int32_t min_value, int32_t max_value, uint8_t size_number, uint8_t size_fraction, bool zeros, bool sign, bool init);
|
|
void lcd_active_instance_number(uint8_t instance_id);
|
|
void lcd_OP_active_instance_number(uint8_t instance_id, uint8_t op);
|
|
void lcd_special_chars(uint8_t mode);
|
|
void eeprom_update_var(uint16_t pos, uint8_t val, const char* val_string);
|
|
|
|
// normal menu
|
|
LCDMenuLib2_menu LCDML_0(255, 0, 0, NULL, NULL); // normal root menu element (do not change)
|
|
LCDMenuLib2 LCDML(LCDML_0, _LCDML_DISP_rows, _LCDML_DISP_cols, lcdml_menu_display, lcdml_menu_clear, lcdml_menu_control);
|
|
|
|
#if defined(USE_FX)
|
|
#include "UI_FX.h"
|
|
#else
|
|
#include "UI_NO_FX.h"
|
|
#endif
|
|
|
|
// create menu
|
|
LCDML_createMenu(_LCDML_DISP_cnt);
|
|
|
|
/***********************************************************************
|
|
CONTROL
|
|
***********************************************************************/
|
|
class EncoderDirection
|
|
{
|
|
public:
|
|
EncoderDirection(void)
|
|
{
|
|
reset();
|
|
}
|
|
|
|
void reset(void)
|
|
{
|
|
button_short = false;
|
|
button_long = false;
|
|
button_pressed = false;
|
|
left = false;
|
|
right = false;
|
|
up = false;
|
|
down = false;
|
|
}
|
|
|
|
void ButtonShort(bool state)
|
|
{
|
|
button_short = state;
|
|
}
|
|
|
|
bool ButtonShort(void)
|
|
{
|
|
if (button_short == true)
|
|
{
|
|
button_short = false;
|
|
return (true);
|
|
}
|
|
return (false);
|
|
}
|
|
|
|
void ButtonLong(bool state)
|
|
{
|
|
button_long = state;
|
|
}
|
|
|
|
bool ButtonLong(void)
|
|
{
|
|
if (button_long == true)
|
|
{
|
|
button_long = false;
|
|
return (true);
|
|
}
|
|
return (false);
|
|
}
|
|
|
|
void ButtonPressed(bool state)
|
|
{
|
|
button_pressed = state;
|
|
}
|
|
|
|
bool ButtonPressed(void)
|
|
{
|
|
return (button_pressed);
|
|
}
|
|
|
|
void Left(bool state)
|
|
{
|
|
left = state;
|
|
}
|
|
|
|
bool Left(void)
|
|
{
|
|
if (left == true)
|
|
{
|
|
left = false;
|
|
return (true);
|
|
}
|
|
return (false);
|
|
}
|
|
|
|
void Right(bool state)
|
|
{
|
|
right = state;
|
|
}
|
|
|
|
bool Right(void)
|
|
{
|
|
if (right == true)
|
|
{
|
|
right = false;
|
|
return (true);
|
|
}
|
|
return (false);
|
|
}
|
|
|
|
void Up(bool state)
|
|
{
|
|
up = state;
|
|
}
|
|
|
|
bool Up(void)
|
|
{
|
|
if (up == true)
|
|
{
|
|
up = false;
|
|
return (true);
|
|
}
|
|
return (false);
|
|
}
|
|
|
|
void Down(bool state)
|
|
{
|
|
down = state;
|
|
}
|
|
|
|
bool Down(void)
|
|
{
|
|
if (down == true)
|
|
{
|
|
down = false;
|
|
return (true);
|
|
}
|
|
return (false);
|
|
}
|
|
|
|
private:
|
|
bool button_short;
|
|
bool button_long;
|
|
bool button_pressed;
|
|
bool left;
|
|
bool right;
|
|
bool up;
|
|
bool down;
|
|
};
|
|
|
|
//Encoder ENCODER[NUM_ENCODER] = {Encoder(ENC_R_PIN_B, ENC_R_PIN_A), Encoder(ENC_L_PIN_B, ENC_L_PIN_A)};
|
|
MD_REncoder ENCODER[NUM_ENCODER] = {MD_REncoder(ENC_R_PIN_B, ENC_R_PIN_A), MD_REncoder(ENC_L_PIN_B, ENC_L_PIN_A)};
|
|
EncoderDirection encoderDir[NUM_ENCODER];
|
|
|
|
long g_LCDML_CONTROL_button_press_time[NUM_ENCODER] = {0, 0};
|
|
bool g_LCDML_CONTROL_button_prev[NUM_ENCODER] = {HIGH, HIGH};
|
|
uint8_t g_LCDML_CONTROL_prev[NUM_ENCODER] = {0, 0};
|
|
bool menu_init = true;
|
|
|
|
#ifdef U8X8_DISPLAY
|
|
const uint8_t * flipped_scroll_bar[5];
|
|
const uint8_t * flipped_block_bar[7];
|
|
const uint8_t * flipped_meter_bar[7];
|
|
|
|
uint8_t * rotTile(const uint8_t * tile)
|
|
{
|
|
uint8_t * newt = new uint8_t[8];
|
|
for (int x = 0; x < 8; x++) {
|
|
uint8_t newb = 0;
|
|
for (int y = 0 ; y < 8; y++) {
|
|
newb |= (tile[y] << x) & 0x80;
|
|
newb >>= 1;
|
|
}
|
|
newt[x] = newb;
|
|
}
|
|
return newt;
|
|
}
|
|
#endif
|
|
|
|
void setup_ui(void)
|
|
{
|
|
// LCD Begin
|
|
#ifdef I2C_DISPLAY
|
|
lcd.init();
|
|
lcd.backlight();
|
|
lcd.clear();
|
|
lcd.noCursor();
|
|
#else
|
|
lcd.begin();
|
|
lcd.clear();
|
|
lcd.setFont(u8x8_font_amstrad_cpc_extended_f);
|
|
#endif
|
|
lcd.setCursor(3, 0);
|
|
lcd.print(F("MicroDexed"));
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("(c)parasiTstudio"));
|
|
|
|
lcd_special_chars(SCROLLBAR);
|
|
// LCDMenuLib Setup
|
|
LCDML_setup(_LCDML_DISP_cnt);
|
|
// Enable Menu Rollover
|
|
//LCDML.MENU_enRollover();
|
|
// Enable Screensaver (screensaver menu function, time to activate in ms)
|
|
//LCDML.SCREEN_enable(UI_func_voice_select, VOICE_SELECTION_MS);
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
void setup_debug_message(void)
|
|
{
|
|
// LCD Begin
|
|
lcd.clear();
|
|
lcd.setCursor(1, 0);
|
|
lcd.print(F("* DEBUG MODE *"));
|
|
lcd.setCursor(1, 1);
|
|
lcd.print(F("ENABLE CONSOLE"));
|
|
delay(300);
|
|
lcd.setCursor(1, 1);
|
|
lcd.print(_LCDML_VERSION);
|
|
lcd.print(F(" "));
|
|
}
|
|
#endif
|
|
|
|
/***********************************************************************
|
|
MENU CONTROL
|
|
***********************************************************************/
|
|
uint8_t get_current_cursor_id(void)
|
|
{
|
|
LCDMenuLib2_menu *tmp;
|
|
|
|
if ((tmp = LCDML.MENU_getCurrentObj()) != NULL)
|
|
return (tmp->getChild(LCDML.MENU_getCursorPosAbs())->getID());
|
|
else
|
|
return (0);
|
|
}
|
|
|
|
void lcdml_menu_control(void)
|
|
{
|
|
// If something must init, put in in the setup condition
|
|
if (LCDML.BT_setup())
|
|
{
|
|
pinMode(BUT_R_PIN, INPUT_PULLUP);
|
|
pinMode(BUT_L_PIN, INPUT_PULLUP);
|
|
|
|
ENCODER[ENC_R].begin();
|
|
ENCODER[ENC_L].begin();
|
|
}
|
|
|
|
if (back_from_volume > BACK_FROM_VOLUME_MS && LCDML.FUNC_getID() == LCDML.OTHER_getIDFromFunction(UI_func_volume))
|
|
{
|
|
encoderDir[ENC_L].reset();
|
|
encoderDir[ENC_R].reset();
|
|
|
|
if (LCDML.MENU_getLastActiveFunctionID() < 0xff)
|
|
LCDML.OTHER_jumpToID(LCDML.MENU_getLastActiveFunctionID());
|
|
else
|
|
LCDML.OTHER_setCursorToID(LCDML.MENU_getLastCursorPositionID());
|
|
//LCDML.FUNC_goBackToMenu();
|
|
}
|
|
|
|
// Volatile Variables
|
|
long g_LCDML_CONTROL_Encoder_position[NUM_ENCODER] = {ENCODER[ENC_R].read(), ENCODER[ENC_L].read()};
|
|
bool button[NUM_ENCODER] = {digitalRead(BUT_R_PIN), digitalRead(BUT_L_PIN)};
|
|
|
|
/************************************************************************************
|
|
Basic encoder handling (from LCDMenuLib2)
|
|
************************************************************************************/
|
|
|
|
// RIGHT
|
|
if (g_LCDML_CONTROL_Encoder_position[ENC_R] <= -3)
|
|
{
|
|
if (!button[ENC_R])
|
|
{
|
|
LCDML.BT_left();
|
|
#ifdef DEBUG
|
|
Serial.println(F("ENC-R left"));
|
|
#endif
|
|
encoderDir[ENC_R].Left(true);
|
|
g_LCDML_CONTROL_button_prev[ENC_R] = LOW;
|
|
g_LCDML_CONTROL_button_press_time[ENC_R] = -1;
|
|
}
|
|
else
|
|
{
|
|
#ifdef DEBUG
|
|
Serial.println(F("ENC-R down"));
|
|
#endif
|
|
encoderDir[ENC_R].Down(true);
|
|
LCDML.BT_down();
|
|
}
|
|
ENCODER[ENC_R].write(g_LCDML_CONTROL_Encoder_position[ENC_R] + 4);
|
|
}
|
|
else if (g_LCDML_CONTROL_Encoder_position[ENC_R] >= 3)
|
|
{
|
|
if (!button[ENC_R])
|
|
{
|
|
#ifdef DEBUG
|
|
Serial.println(F("ENC-R right"));
|
|
#endif
|
|
encoderDir[ENC_R].Right(true);
|
|
LCDML.BT_right();
|
|
g_LCDML_CONTROL_button_prev[ENC_R] = LOW;
|
|
g_LCDML_CONTROL_button_press_time[ENC_R] = -1;
|
|
}
|
|
else
|
|
{
|
|
#ifdef DEBUG
|
|
Serial.println(F("ENC-R up"));
|
|
#endif
|
|
encoderDir[ENC_R].Up(true);
|
|
LCDML.BT_up();
|
|
}
|
|
ENCODER[ENC_R].write(g_LCDML_CONTROL_Encoder_position[ENC_R] - 4);
|
|
}
|
|
else
|
|
{
|
|
if (!button[ENC_R] && g_LCDML_CONTROL_button_prev[ENC_R]) //falling edge, button pressed
|
|
{
|
|
encoderDir[ENC_R].ButtonPressed(true);
|
|
g_LCDML_CONTROL_button_prev[ENC_R] = LOW;
|
|
g_LCDML_CONTROL_button_press_time[ENC_R] = millis();
|
|
}
|
|
else if (button[ENC_R] && !g_LCDML_CONTROL_button_prev[ENC_R]) //rising edge, button not active
|
|
{
|
|
encoderDir[ENC_R].ButtonPressed(false);
|
|
g_LCDML_CONTROL_button_prev[ENC_R] = HIGH;
|
|
|
|
if (g_LCDML_CONTROL_button_press_time[ENC_R] < 0)
|
|
{
|
|
g_LCDML_CONTROL_button_press_time[ENC_R] = millis();
|
|
//Reset for left right action
|
|
}
|
|
else if ((millis() - g_LCDML_CONTROL_button_press_time[ENC_R]) >= LONG_BUTTON_PRESS)
|
|
{
|
|
#ifdef DEBUG
|
|
Serial.println("ENC-R long released");
|
|
#endif
|
|
//LCDML.BT_quit();
|
|
encoderDir[ENC_R].ButtonLong(true);
|
|
}
|
|
else if ((millis() - g_LCDML_CONTROL_button_press_time[ENC_R]) >= BUT_DEBOUNCE_MS)
|
|
{
|
|
#ifdef DEBUG
|
|
Serial.println(F("ENC-R short"));
|
|
#endif
|
|
encoderDir[ENC_R].ButtonShort(true);
|
|
|
|
LCDML.BT_enter();
|
|
}
|
|
}
|
|
}
|
|
|
|
if (encoderDir[ENC_R].ButtonPressed() == true && (millis() - g_LCDML_CONTROL_button_press_time[ENC_R]) >= LONG_BUTTON_PRESS)
|
|
{
|
|
#ifdef DEBUG
|
|
Serial.println("ENC-R long recognized");
|
|
#endif
|
|
encoderDir[ENC_R].ButtonLong(true);
|
|
|
|
#if NUM_DEXED > 1
|
|
if (LCDML.FUNC_getID() == LCDML.OTHER_getIDFromFunction(UI_func_voice_select))
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
LCDML.OTHER_updateFunc();
|
|
LCDML.loop_menu();
|
|
}
|
|
else
|
|
{
|
|
#endif
|
|
if (LCDML.FUNC_getID() < 0xff)
|
|
LCDML.FUNC_setGBAToLastFunc();
|
|
else
|
|
LCDML.FUNC_setGBAToLastCursorPos();
|
|
|
|
LCDML.OTHER_jumpToFunc(UI_func_voice_select);
|
|
#if NUM_DEXED > 1
|
|
}
|
|
#endif
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
|
|
// LEFT
|
|
if (g_LCDML_CONTROL_Encoder_position[ENC_L] <= -3)
|
|
{
|
|
if (!button[ENC_L])
|
|
{
|
|
#ifdef DEBUG
|
|
Serial.println(F("ENC-L left"));
|
|
#endif
|
|
encoderDir[ENC_L].Left(true);
|
|
LCDML.BT_left();
|
|
g_LCDML_CONTROL_button_prev[ENC_L] = LOW;
|
|
g_LCDML_CONTROL_button_press_time[ENC_L] = -1;
|
|
}
|
|
else
|
|
{
|
|
#ifdef DEBUG
|
|
Serial.println(F("ENC-L down"));
|
|
#endif
|
|
encoderDir[ENC_L].Down(true);
|
|
LCDML.BT_down();
|
|
if (LCDML.FUNC_getID() != LCDML.OTHER_getIDFromFunction(UI_func_volume))
|
|
{
|
|
LCDML.OTHER_jumpToFunc(UI_func_volume);
|
|
}
|
|
}
|
|
ENCODER[ENC_L].write(g_LCDML_CONTROL_Encoder_position[ENC_L] + 4);
|
|
}
|
|
else if (g_LCDML_CONTROL_Encoder_position[ENC_L] >= 3)
|
|
{
|
|
if (!button[ENC_L])
|
|
{
|
|
#ifdef DEBUG
|
|
Serial.println(F("ENC-L right"));
|
|
#endif
|
|
encoderDir[ENC_L].Right(true);
|
|
LCDML.BT_right();
|
|
g_LCDML_CONTROL_button_prev[ENC_L] = LOW;
|
|
g_LCDML_CONTROL_button_press_time[ENC_L] = -1;
|
|
}
|
|
else
|
|
{
|
|
#ifdef DEBUG
|
|
Serial.println(F("ENC-L up"));
|
|
#endif
|
|
encoderDir[ENC_L].Up(true);
|
|
LCDML.BT_up();
|
|
if (LCDML.FUNC_getID() != LCDML.OTHER_getIDFromFunction(UI_func_volume))
|
|
{
|
|
LCDML.OTHER_jumpToFunc(UI_func_volume);
|
|
}
|
|
}
|
|
ENCODER[ENC_L].write(g_LCDML_CONTROL_Encoder_position[ENC_L] - 4);
|
|
}
|
|
else
|
|
{
|
|
if (!button[ENC_L] && g_LCDML_CONTROL_button_prev[ENC_L]) //falling edge, button pressed
|
|
{
|
|
encoderDir[ENC_L].ButtonPressed(true);
|
|
g_LCDML_CONTROL_button_prev[ENC_L] = LOW;
|
|
g_LCDML_CONTROL_button_press_time[ENC_L] = millis();
|
|
}
|
|
else if (button[ENC_L] && !g_LCDML_CONTROL_button_prev[ENC_L]) //rising edge, button not active
|
|
{
|
|
encoderDir[ENC_L].ButtonPressed(false);
|
|
g_LCDML_CONTROL_button_prev[ENC_L] = HIGH;
|
|
|
|
if (g_LCDML_CONTROL_button_press_time[ENC_L] < 0)
|
|
{
|
|
g_LCDML_CONTROL_button_press_time[ENC_L] = millis();
|
|
//Reset for left right action
|
|
}
|
|
else if ((millis() - g_LCDML_CONTROL_button_press_time[ENC_L]) >= LONG_BUTTON_PRESS)
|
|
{
|
|
#ifdef DEBUG
|
|
Serial.println(F("ENC-L long released"));
|
|
#endif
|
|
//encoderDir[ENC_L].ButtonLong(true);
|
|
//LCDML.BT_quit();
|
|
}
|
|
else if ((millis() - g_LCDML_CONTROL_button_press_time[ENC_L]) >= BUT_DEBOUNCE_MS)
|
|
{
|
|
//LCDML.BT_enter();
|
|
#ifdef DEBUG
|
|
Serial.println(F("ENC-L short"));
|
|
#endif
|
|
encoderDir[ENC_L].ButtonShort(true);
|
|
|
|
if ((LCDML.MENU_getLastActiveFunctionID() == 0xff && LCDML.MENU_getLastCursorPositionID() == 0) || menu_init == true)
|
|
{
|
|
LCDML.MENU_goRoot();
|
|
menu_init = false;
|
|
}
|
|
else if (LCDML.FUNC_getID() == LCDML.OTHER_getIDFromFunction(UI_func_volume))
|
|
{
|
|
encoderDir[ENC_L].reset();
|
|
encoderDir[ENC_R].reset();
|
|
|
|
if (LCDML.MENU_getLastActiveFunctionID() < 0xff)
|
|
LCDML.OTHER_jumpToID(LCDML.MENU_getLastActiveFunctionID());
|
|
else
|
|
LCDML.OTHER_setCursorToID(LCDML.MENU_getLastCursorPositionID());
|
|
}
|
|
else
|
|
LCDML.BT_quit();
|
|
}
|
|
}
|
|
}
|
|
|
|
if (encoderDir[ENC_L].ButtonPressed() == true && (millis() - g_LCDML_CONTROL_button_press_time[ENC_L]) >= LONG_BUTTON_PRESS)
|
|
{
|
|
#ifdef DEBUG
|
|
Serial.println(F("ENC-L long recognized"));
|
|
#endif
|
|
for (uint8_t i = 0; i < NUM_DEXED; i++)
|
|
MicroDexed[i]->panic();
|
|
|
|
encoderDir[ENC_L].reset();
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
/***********************************************************************
|
|
MENU DISPLAY
|
|
***********************************************************************/
|
|
void lcdml_menu_clear(void)
|
|
{
|
|
lcd.clear();
|
|
lcd.setCursor(0, 0);
|
|
}
|
|
|
|
void lcdml_menu_display(void)
|
|
{
|
|
// update content
|
|
// ***************
|
|
if (LCDML.DISP_checkMenuUpdate()) {
|
|
// clear menu
|
|
// ***************
|
|
LCDML.DISP_clear();
|
|
|
|
// declaration of some variables
|
|
// ***************
|
|
// content variable
|
|
char content_text[_LCDML_DISP_cols]; // save the content text of every menu element
|
|
// menu element object
|
|
LCDMenuLib2_menu *tmp;
|
|
// some limit values
|
|
uint8_t i = LCDML.MENU_getScroll();
|
|
uint8_t maxi = _LCDML_DISP_rows + i;
|
|
uint8_t n = 0;
|
|
|
|
// check if this element has children
|
|
if ((tmp = LCDML.MENU_getDisplayedObj()) != NULL)
|
|
{
|
|
// loop to display lines
|
|
do
|
|
{
|
|
// check if a menu element has a condition and if the condition be true
|
|
if (tmp->checkCondition())
|
|
{
|
|
// check the type off a menu element
|
|
if (tmp->checkType_menu() == true)
|
|
{
|
|
// display normal content
|
|
LCDML_getContent(content_text, tmp->getID());
|
|
lcd.setCursor(1, n);
|
|
lcd.print(content_text);
|
|
}
|
|
else
|
|
{
|
|
if (tmp->checkType_dynParam()) {
|
|
tmp->callback(n);
|
|
}
|
|
}
|
|
// increment some values
|
|
i++;
|
|
n++;
|
|
}
|
|
// try to go to the next sibling and check the number of displayed rows
|
|
} while (((tmp = tmp->getSibling(1)) != NULL) && (i < maxi));
|
|
}
|
|
}
|
|
|
|
if (LCDML.DISP_checkMenuCursorUpdate())
|
|
{
|
|
// init vars
|
|
uint8_t n_max = (LCDML.MENU_getChilds() >= _LCDML_DISP_rows) ? _LCDML_DISP_rows : (LCDML.MENU_getChilds());
|
|
uint8_t scrollbar_min = 0;
|
|
uint8_t scrollbar_max = LCDML.MENU_getChilds();
|
|
uint8_t scrollbar_cur_pos = LCDML.MENU_getCursorPosAbs();
|
|
uint8_t scroll_pos = ((1.*n_max * _LCDML_DISP_rows) / (scrollbar_max - 1) * scrollbar_cur_pos);
|
|
|
|
// display rows
|
|
for (uint8_t n = 0; n < n_max; n++)
|
|
{
|
|
//set cursor
|
|
lcd.setCursor(0, n);
|
|
|
|
//set cursor char
|
|
if (n == LCDML.MENU_getCursorPos()) {
|
|
lcd.write(_LCDML_DISP_cfg_cursor);
|
|
} else {
|
|
lcd.write(' ');
|
|
}
|
|
|
|
// delete or reset scrollbar
|
|
if (_LCDML_DISP_cfg_scrollbar == 1) {
|
|
if (scrollbar_max > n_max) {
|
|
#ifdef I2C_DISPLAY
|
|
lcd.setCursor((_LCDML_DISP_cols - 1), n);
|
|
lcd.write((uint8_t)0);
|
|
#else
|
|
lcd.drawTile((_LCDML_DISP_cols - 1), n, 1, flipped_scroll_bar[0]);
|
|
lcd.setCursor((_LCDML_DISP_cols), n + 1);
|
|
#endif
|
|
}
|
|
else {
|
|
lcd.setCursor((_LCDML_DISP_cols - 1), n);
|
|
lcd.print(F(" "));
|
|
}
|
|
}
|
|
}
|
|
|
|
// display scrollbar
|
|
if (_LCDML_DISP_cfg_scrollbar == 1) {
|
|
if (scrollbar_max > n_max) {
|
|
//set scroll position
|
|
if (scrollbar_cur_pos == scrollbar_min) {
|
|
// min pos
|
|
#ifdef I2C_DISPLAY
|
|
lcd.setCursor((_LCDML_DISP_cols - 1), 0);
|
|
lcd.write((uint8_t)1);
|
|
#else
|
|
lcd.drawTile((_LCDML_DISP_cols - 1), 0, 1, flipped_scroll_bar[1]);
|
|
lcd.setCursor((_LCDML_DISP_cols), 1);
|
|
#endif
|
|
} else if (scrollbar_cur_pos == (scrollbar_max - 1)) {
|
|
// max pos
|
|
#ifdef I2C_DISPLAY
|
|
lcd.setCursor((_LCDML_DISP_cols - 1), (n_max - 1));
|
|
lcd.write((uint8_t)4);
|
|
#else
|
|
lcd.drawTile((_LCDML_DISP_cols - 1), (n_max - 1), 1, flipped_scroll_bar[4]);
|
|
lcd.setCursor((_LCDML_DISP_cols), (n_max));
|
|
#endif
|
|
} else {
|
|
// between
|
|
#ifdef I2C_DISPLAY
|
|
lcd.setCursor((_LCDML_DISP_cols - 1), scroll_pos / n_max);
|
|
lcd.write((uint8_t)(scroll_pos % n_max) + 1);
|
|
#else
|
|
lcd.drawTile((_LCDML_DISP_cols - 1), scroll_pos / n_max, 1, flipped_scroll_bar[(scroll_pos % n_max) + 1]);
|
|
lcd.setCursor((_LCDML_DISP_cols), (scroll_pos / n_max) + 1);
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
//####################################################################################################################################################################################################
|
|
|
|
/***********************************************************************
|
|
MENU
|
|
***********************************************************************/
|
|
|
|
#ifdef USE_FX
|
|
void UI_func_reverb_roomsize(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Reverb Room", configuration.fx.reverb_roomsize, 1.0, REVERB_ROOMSIZE_MIN, REVERB_ROOMSIZE_MAX, 3, false, false, true);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.fx.reverb_roomsize = constrain(configuration.fx.reverb_roomsize + ENCODER[ENC_R].speed(), REVERB_ROOMSIZE_MIN, REVERB_ROOMSIZE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.fx.reverb_roomsize = constrain(configuration.fx.reverb_roomsize - ENCODER[ENC_R].speed(), REVERB_ROOMSIZE_MIN, REVERB_ROOMSIZE_MAX);
|
|
}
|
|
lcd_display_bar_int("Reverb Room", configuration.fx.reverb_roomsize, 1.0, REVERB_ROOMSIZE_MIN, REVERB_ROOMSIZE_MAX, 3, false, false, false);
|
|
|
|
freeverb_r.roomsize(mapfloat(configuration.fx.reverb_roomsize, REVERB_ROOMSIZE_MIN, REVERB_ROOMSIZE_MAX, 0.0, 1.0));
|
|
freeverb_l.roomsize(mapfloat(configuration.fx.reverb_roomsize, REVERB_ROOMSIZE_MIN, REVERB_ROOMSIZE_MAX, 0.0, 1.0));
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.reverb_roomsize), configuration.fx.reverb_roomsize);
|
|
}
|
|
}
|
|
|
|
void UI_func_reverb_damping(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Reverb Damp.", configuration.fx.reverb_damping, 1.0, REVERB_DAMPING_MIN, REVERB_DAMPING_MAX, 3, false, false, true);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.fx.reverb_damping = constrain(configuration.fx.reverb_damping + ENCODER[ENC_R].speed(), REVERB_DAMPING_MIN, REVERB_DAMPING_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.fx.reverb_damping = constrain(configuration.fx.reverb_damping - ENCODER[ENC_R].speed(), REVERB_DAMPING_MIN, REVERB_DAMPING_MAX);
|
|
}
|
|
|
|
lcd_display_bar_int("Reverb Damp.", configuration.fx.reverb_damping, 1.0, REVERB_DAMPING_MIN, REVERB_DAMPING_MAX, 3, false, false, false);
|
|
|
|
freeverb_l.damping(mapfloat(configuration.fx.reverb_damping, REVERB_DAMPING_MIN, REVERB_DAMPING_MAX, 0.0, 1.0));
|
|
freeverb_r.damping(mapfloat(configuration.fx.reverb_damping, REVERB_DAMPING_MIN, REVERB_DAMPING_MAX, 0.0, 1.0));
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.reverb_damping), configuration.fx.reverb_damping);
|
|
}
|
|
}
|
|
|
|
void UI_func_reverb_level(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Reverb Level", configuration.fx.reverb_level, 1.0, REVERB_LEVEL_MIN, REVERB_LEVEL_MAX, 3, false, false, true);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.fx.reverb_level = constrain(configuration.fx.reverb_level + ENCODER[ENC_R].speed(), REVERB_LEVEL_MIN, REVERB_LEVEL_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.fx.reverb_level = constrain(configuration.fx.reverb_level - ENCODER[ENC_R].speed(), REVERB_LEVEL_MIN, REVERB_LEVEL_MAX);
|
|
}
|
|
|
|
lcd_display_bar_int("Reverb Level", configuration.fx.reverb_level, 1.0, REVERB_LEVEL_MIN, REVERB_LEVEL_MAX, 3, false, false, true);
|
|
|
|
master_mixer_r.gain(3, pseudo_log_curve(mapfloat(configuration.fx.reverb_level, REVERB_LEVEL_MIN, REVERB_LEVEL_MAX, 0.0, 1.0)));
|
|
master_mixer_l.gain(3, pseudo_log_curve(mapfloat(configuration.fx.reverb_level, REVERB_LEVEL_MIN, REVERB_LEVEL_MAX, 0.0, 1.0)));
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.reverb_level), configuration.fx.reverb_level);
|
|
}
|
|
}
|
|
|
|
void UI_func_chorus_frequency(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_float("Chorus Frq.", configuration.fx.chorus_frequency[selected_instance_id], 0.1, CHORUS_FREQUENCY_MIN, CHORUS_FREQUENCY_MAX, 2, 1, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.fx.chorus_frequency[selected_instance_id] = constrain(configuration.fx.chorus_frequency[selected_instance_id] + ENCODER[ENC_R].speed(), CHORUS_FREQUENCY_MIN, CHORUS_FREQUENCY_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.fx.chorus_frequency[selected_instance_id] = constrain(configuration.fx.chorus_frequency[selected_instance_id] - ENCODER[ENC_R].speed(), CHORUS_FREQUENCY_MIN, CHORUS_FREQUENCY_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
lcd_display_bar_float("Chorus Frq.", configuration.fx.chorus_frequency[selected_instance_id], 0.1, CHORUS_FREQUENCY_MIN, CHORUS_FREQUENCY_MAX, 2, 1, false, false, false);
|
|
|
|
chorus_modulator[selected_instance_id]->frequency(configuration.fx.chorus_frequency[selected_instance_id] / 10.0);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.chorus_frequency[0]), configuration.fx.chorus_frequency[0]);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.chorus_frequency[1]), configuration.fx.chorus_frequency[1]);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_chorus_waveform(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Chorus Waveform"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if (LCDML.BT_checkDown() && encoderDir[ENC_R].Down())
|
|
configuration.fx.chorus_waveform[selected_instance_id] = constrain(configuration.fx.chorus_waveform[selected_instance_id] + 1, CHORUS_WAVEFORM_MIN, CHORUS_WAVEFORM_MAX);
|
|
else if (LCDML.BT_checkUp() && encoderDir[ENC_R].Up())
|
|
configuration.fx.chorus_waveform[selected_instance_id] = constrain(configuration.fx.chorus_waveform[selected_instance_id] - 1, CHORUS_WAVEFORM_MIN, CHORUS_WAVEFORM_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.fx.chorus_waveform[selected_instance_id])
|
|
{
|
|
case 0:
|
|
chorus_modulator[selected_instance_id]->begin(WAVEFORM_TRIANGLE);
|
|
lcd.print(F("[TRIANGLE]"));
|
|
break;
|
|
case 1:
|
|
chorus_modulator[selected_instance_id]->begin(WAVEFORM_SINE);
|
|
lcd.print(F("[SINE ]"));
|
|
break;
|
|
default:
|
|
chorus_modulator[selected_instance_id]->begin(WAVEFORM_TRIANGLE);
|
|
lcd.print(F("[TRIANGLE]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.chorus_waveform[0]), configuration.fx.chorus_waveform[0]);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.chorus_waveform[1]), configuration.fx.chorus_waveform[1]);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_chorus_depth(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Chorus Dpt.", configuration.fx.chorus_depth[selected_instance_id], 1.0, CHORUS_DEPTH_MIN, CHORUS_DEPTH_MAX, 3, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.fx.chorus_depth[selected_instance_id] = constrain(configuration.fx.chorus_depth[selected_instance_id] + ENCODER[ENC_R].speed(), CHORUS_DEPTH_MIN, CHORUS_DEPTH_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.fx.chorus_depth[selected_instance_id] = constrain(configuration.fx.chorus_depth[selected_instance_id] - ENCODER[ENC_R].speed(), CHORUS_DEPTH_MIN, CHORUS_DEPTH_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("Chorus Dpt.", configuration.fx.chorus_depth[selected_instance_id], 1.0, CHORUS_DEPTH_MIN, CHORUS_DEPTH_MAX, 3, false, false, false);
|
|
|
|
chorus_modulator[selected_instance_id]->amplitude(configuration.fx.chorus_depth[selected_instance_id] / 100.0);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.chorus_depth[0]), configuration.fx.chorus_depth[0]);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.chorus_depth[1]), configuration.fx.chorus_depth[1]);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_chorus_level(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Chorus Lvl.", configuration.fx.chorus_level[selected_instance_id], 1.0, CHORUS_LEVEL_MIN, CHORUS_LEVEL_MAX, 3, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.fx.chorus_level[selected_instance_id] = constrain(configuration.fx.chorus_level[selected_instance_id] + ENCODER[ENC_R].speed(), CHORUS_LEVEL_MIN, CHORUS_LEVEL_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.fx.chorus_level[selected_instance_id] = constrain(configuration.fx.chorus_level[selected_instance_id] - ENCODER[ENC_R].speed(), CHORUS_LEVEL_MIN, CHORUS_LEVEL_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("Chorus Lvl.", configuration.fx.chorus_level[selected_instance_id], 1.0, CHORUS_LEVEL_MIN, CHORUS_LEVEL_MAX, 3, false, false, false);
|
|
|
|
//chorus_mixer[selected_instance_id]->gain(0, pseudo_log_curve(1.0 - mapfloat(configuration.fx.chorus_level[selected_instance_id], CHORUS_LEVEL_MIN, CHORUS_LEVEL_MAX, 0.0, 0.5)));
|
|
//chorus_mixer[selected_instance_id]->gain(1, pseudo_log_curve(mapfloat(configuration.fx.chorus_level[selected_instance_id], CHORUS_LEVEL_MIN, CHORUS_LEVEL_MAX, 0.0, 0.5)));
|
|
//chorus_mixer[selected_instance_id]->gain(0, 1.0 - mapfloat(configuration.fx.chorus_level[selected_instance_id], CHORUS_LEVEL_MIN, CHORUS_LEVEL_MAX, 0.0, 0.5));
|
|
chorus_mixer[selected_instance_id]->gain(1, mapfloat(configuration.fx.chorus_level[selected_instance_id], CHORUS_LEVEL_MIN, CHORUS_LEVEL_MAX, 0.0, 0.5));
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.chorus_level[0]), configuration.fx.chorus_level[0]);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.chorus_level[1]), configuration.fx.chorus_level[1]);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_delay_time(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Delay Time", configuration.fx.delay_time[selected_instance_id], 10.0, DELAY_TIME_MIN, DELAY_TIME_MAX, 3, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.fx.delay_time[selected_instance_id] = constrain(configuration.fx.delay_time[selected_instance_id] + ENCODER[ENC_R].speed(), DELAY_TIME_MIN, DELAY_TIME_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.fx.delay_time[selected_instance_id] = constrain(configuration.fx.delay_time[selected_instance_id] - ENCODER[ENC_R].speed(), DELAY_TIME_MIN, DELAY_TIME_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("Delay Time", configuration.fx.delay_time[selected_instance_id], 10.0, DELAY_TIME_MIN, DELAY_TIME_MAX, 3, false, false, true);
|
|
|
|
if (configuration.fx.delay_time[selected_instance_id] <= DELAY_TIME_MIN)
|
|
delay_fx[selected_instance_id]->disable(0);
|
|
else
|
|
delay_fx[selected_instance_id]->delay(0, constrain(configuration.fx.delay_time[selected_instance_id], DELAY_TIME_MIN, DELAY_TIME_MAX) * 10);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.delay_time[0]), configuration.fx.delay_time[0]);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.delay_time[1]), configuration.fx.delay_time[1]);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_delay_feedback(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Delay Feedb.", configuration.fx.delay_feedback[selected_instance_id], 1.0, DELAY_FEEDBACK_MIN, DELAY_FEEDBACK_MAX, 3, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.fx.delay_feedback[selected_instance_id] = constrain(configuration.fx.delay_feedback[selected_instance_id] + ENCODER[ENC_R].speed(), DELAY_FEEDBACK_MIN, DELAY_FEEDBACK_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.fx.delay_feedback[selected_instance_id] = constrain(configuration.fx.delay_feedback[selected_instance_id] - ENCODER[ENC_R].speed(), DELAY_FEEDBACK_MIN, DELAY_FEEDBACK_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("Delay Feedb.", configuration.fx.delay_feedback[selected_instance_id], 1.0, DELAY_FEEDBACK_MIN, DELAY_FEEDBACK_MAX, 3, false, false, false);
|
|
|
|
delay_fb_mixer[selected_instance_id]->gain(1, pseudo_log_curve(mapfloat(configuration.fx.delay_feedback[selected_instance_id], DELAY_FEEDBACK_MIN, DELAY_FEEDBACK_MAX, 0.0, 1.0))); // amount of feedback
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.delay_feedback[0]), configuration.fx.delay_feedback[0]);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.delay_feedback[1]), configuration.fx.delay_feedback[1]);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_delay_level(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Delay Lvl.", configuration.fx.delay_level[selected_instance_id], 1.0, DELAY_LEVEL_MIN, DELAY_LEVEL_MAX, 3, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.fx.delay_level[selected_instance_id] = constrain(configuration.fx.delay_level[selected_instance_id] + ENCODER[ENC_R].speed(), DELAY_LEVEL_MIN, DELAY_LEVEL_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.fx.delay_level[selected_instance_id] = constrain(configuration.fx.delay_level[selected_instance_id] - ENCODER[ENC_R].speed(), DELAY_LEVEL_MIN, DELAY_LEVEL_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("Delay Lvl.", configuration.fx.delay_level[selected_instance_id], 1.0, DELAY_LEVEL_MIN, DELAY_LEVEL_MAX, 3, false, false, false);
|
|
|
|
delay_mixer[selected_instance_id]->gain(1, pseudo_log_curve(mapfloat(configuration.fx.delay_level[selected_instance_id], DELAY_LEVEL_MIN, DELAY_LEVEL_MAX, 0.0, 1.0)));
|
|
if (configuration.fx.delay_level[selected_instance_id] <= DELAY_LEVEL_MIN)
|
|
delay_fx[selected_instance_id]->disable(0);
|
|
else
|
|
delay_fx[selected_instance_id]->delay(0, constrain(configuration.fx.delay_time[selected_instance_id], DELAY_TIME_MIN, DELAY_TIME_MAX) * 10);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.delay_level[0]), configuration.fx.delay_level[0]);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.delay_level[1]), configuration.fx.delay_level[1]);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_reverb_send(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Reverb Send", configuration.fx.reverb_send[selected_instance_id], 1.0, REVERB_SEND_MIN, REVERB_SEND_MAX, 3, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.fx.reverb_send[selected_instance_id] = constrain(configuration.fx.reverb_send[selected_instance_id] + ENCODER[ENC_R].speed(), REVERB_SEND_MIN, REVERB_SEND_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.fx.reverb_send[selected_instance_id] = constrain(configuration.fx.reverb_send[selected_instance_id] - ENCODER[ENC_R].speed(), REVERB_SEND_MIN, REVERB_SEND_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("Reverb Send", configuration.fx.reverb_send[selected_instance_id], 1.0, REVERB_SEND_MIN, REVERB_SEND_MAX, 3, false, false, false);
|
|
|
|
reverb_mixer_r.gain(selected_instance_id, pseudo_log_curve(mapfloat(configuration.fx.reverb_send[selected_instance_id], REVERB_SEND_MIN, REVERB_SEND_MAX, 0.0, 1.0)));
|
|
reverb_mixer_l.gain(selected_instance_id, pseudo_log_curve(mapfloat(configuration.fx.reverb_send[selected_instance_id], REVERB_SEND_MIN, REVERB_SEND_MAX, 0.0, 1.0)));
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.reverb_send[0]), configuration.fx.reverb_send[0]);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.reverb_send[1]), configuration.fx.reverb_send[1]);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_filter_cutoff(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Filter Cut", configuration.dexed[selected_instance_id].filter_cutoff, 1.0, FILTER_CUTOFF_MIN, FILTER_CUTOFF_MAX, 3, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].filter_cutoff = constrain(configuration.dexed[selected_instance_id].filter_cutoff + ENCODER[ENC_R].speed(), FILTER_CUTOFF_MIN, FILTER_CUTOFF_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].filter_cutoff = constrain(configuration.dexed[selected_instance_id].filter_cutoff - ENCODER[ENC_R].speed(), FILTER_CUTOFF_MIN, FILTER_CUTOFF_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("Filter Cut", configuration.dexed[selected_instance_id].filter_cutoff, 1.0, FILTER_CUTOFF_MIN, FILTER_CUTOFF_MAX, 3, false, false, false);
|
|
|
|
MicroDexed[selected_instance_id]->fx.Cutoff = mapfloat(configuration.dexed[selected_instance_id].filter_cutoff, FILTER_CUTOFF_MIN, FILTER_CUTOFF_MAX, 1.0, 0.0);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].filter_cutoff), configuration.dexed[0].filter_cutoff);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].filter_cutoff), configuration.dexed[1].filter_cutoff);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_filter_resonance(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Filter Res", configuration.dexed[selected_instance_id].filter_resonance, 1.0, FILTER_RESONANCE_MIN, FILTER_RESONANCE_MAX, 3, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].filter_resonance = constrain(configuration.dexed[selected_instance_id].filter_resonance + ENCODER[ENC_R].speed(), FILTER_RESONANCE_MIN, FILTER_RESONANCE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].filter_resonance = constrain(configuration.dexed[selected_instance_id].filter_resonance - ENCODER[ENC_R].speed(), FILTER_RESONANCE_MIN, FILTER_RESONANCE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("Filter Res", configuration.dexed[selected_instance_id].filter_resonance, 1.0, FILTER_RESONANCE_MIN, FILTER_RESONANCE_MAX, 3, false, false, false);
|
|
|
|
MicroDexed[selected_instance_id]->fx.Reso = mapfloat(configuration.dexed[selected_instance_id].filter_resonance, FILTER_RESONANCE_MIN, FILTER_RESONANCE_MAX, 1.0, 0.0);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].filter_resonance), configuration.dexed[0].filter_resonance);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].filter_resonance), configuration.dexed[1].filter_resonance);
|
|
#endif
|
|
}
|
|
}
|
|
#endif
|
|
|
|
void UI_func_transpose(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(METERBAR);
|
|
lcd_display_meter_int("Transpose", configuration.dexed[selected_instance_id].transpose, 1.0, -24.0, TRANSPOSE_MIN, TRANSPOSE_MAX, 2, false, true, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].transpose = constrain(configuration.dexed[selected_instance_id].transpose + ENCODER[ENC_R].speed(), TRANSPOSE_MIN, TRANSPOSE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].transpose = constrain(configuration.dexed[selected_instance_id].transpose - ENCODER[ENC_R].speed(), TRANSPOSE_MIN, TRANSPOSE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_meter_int("Transpose", configuration.dexed[selected_instance_id].transpose, 1.0, -24.0, TRANSPOSE_MIN, TRANSPOSE_MAX, 2, false, true, true);
|
|
|
|
MicroDexed[selected_instance_id]->data[DEXED_VOICE_OFFSET + DEXED_TRANSPOSE] = configuration.dexed[selected_instance_id].transpose;
|
|
MicroDexed[selected_instance_id]->notesOff();
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].transpose), configuration.dexed[0].transpose);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].transpose), configuration.dexed[1].transpose);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_tune(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(METERBAR);
|
|
lcd_display_meter_int("Fine Tune", configuration.dexed[selected_instance_id].tune, 1.0, -100.0, TUNE_MIN, TUNE_MAX, 3, false, true, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].tune = constrain(configuration.dexed[selected_instance_id].tune + ENCODER[ENC_R].speed(), TUNE_MIN, TUNE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].tune = constrain(configuration.dexed[selected_instance_id].tune - ENCODER[ENC_R].speed(), TUNE_MIN, TUNE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_meter_int("Fine Tune", configuration.dexed[selected_instance_id].tune, 1.0, -100.0, TUNE_MIN, TUNE_MAX, 3, false, true, false);
|
|
|
|
MicroDexed[selected_instance_id]->controllers.masterTune = (int((configuration.dexed[selected_instance_id].tune - 100) / 100.0 * 0x4000) << 11) * (1.0 / 12);
|
|
MicroDexed[selected_instance_id]->doRefreshVoice();
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].tune), configuration.dexed[0].tune);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].tune), configuration.dexed[1].tune);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_midi_channel(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("MIDI Channel"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if (LCDML.BT_checkDown() && encoderDir[ENC_R].Down())
|
|
configuration.dexed[selected_instance_id].midi_channel = constrain(configuration.dexed[selected_instance_id].midi_channel + ENCODER[ENC_R].speed(), MIDI_CHANNEL_MIN, MIDI_CHANNEL_MAX);
|
|
else if (LCDML.BT_checkUp() && encoderDir[ENC_R].Up())
|
|
configuration.dexed[selected_instance_id].midi_channel = constrain(configuration.dexed[selected_instance_id].midi_channel - ENCODER[ENC_R].speed(), MIDI_CHANNEL_MIN, MIDI_CHANNEL_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
|
|
lcd.setCursor(0, 1);
|
|
if (configuration.dexed[selected_instance_id].midi_channel == 0)
|
|
{
|
|
lcd.print(F("[OMNI]"));
|
|
}
|
|
else
|
|
{
|
|
lcd_display_int(configuration.dexed[selected_instance_id].midi_channel, 4, false, true, false);
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
// you can here reset some global vars or do nothing
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].midi_channel), configuration.dexed[0].midi_channel);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].midi_channel), configuration.dexed[1].midi_channel);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void getNoteName(char* noteName, uint8_t noteNumber)
|
|
{
|
|
char notes [12][3] = {"A", "A#", "B", "C", "C#", "D", "D#", "E", "F", "F#", "G", "G#"};
|
|
uint8_t oct_index = noteNumber - 12;
|
|
|
|
noteNumber -= 21;
|
|
sprintf(noteName, "%2s%1d", notes[noteNumber % 12], oct_index / 12);
|
|
}
|
|
|
|
void UI_func_lowest_note(uint8_t param)
|
|
{
|
|
char note_name[4];
|
|
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
getNoteName(note_name, configuration.dexed[selected_instance_id].lowest_note);
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Lowest Note"));
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("["));
|
|
lcd.print(note_name);
|
|
lcd.print(F("]"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].lowest_note = constrain(configuration.dexed[selected_instance_id].lowest_note + ENCODER[ENC_R].speed(), INSTANCE_LOWEST_NOTE_MIN, INSTANCE_LOWEST_NOTE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].lowest_note = constrain(configuration.dexed[selected_instance_id].lowest_note - ENCODER[ENC_R].speed(), INSTANCE_LOWEST_NOTE_MIN, INSTANCE_LOWEST_NOTE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
getNoteName(note_name, configuration.dexed[selected_instance_id].lowest_note);
|
|
lcd.setCursor(1, 1);
|
|
lcd.print(note_name);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].lowest_note), configuration.dexed[0].lowest_note);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].lowest_note), configuration.dexed[1].lowest_note);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_highest_note(uint8_t param)
|
|
{
|
|
char note_name[4];
|
|
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
getNoteName(note_name, configuration.dexed[selected_instance_id].highest_note);
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Highest Note"));
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("["));
|
|
lcd.print(note_name);
|
|
lcd.print(F("]"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].highest_note = constrain(configuration.dexed[selected_instance_id].highest_note + ENCODER[ENC_R].speed(), INSTANCE_HIGHEST_NOTE_MIN, INSTANCE_HIGHEST_NOTE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].highest_note = constrain(configuration.dexed[selected_instance_id].highest_note - ENCODER[ENC_R].speed(), INSTANCE_HIGHEST_NOTE_MIN, INSTANCE_HIGHEST_NOTE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
getNoteName(note_name, configuration.dexed[selected_instance_id].highest_note);
|
|
lcd.setCursor(1, 1);
|
|
lcd.print(note_name);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].highest_note), configuration.dexed[0].highest_note);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].highest_note), configuration.dexed[1].highest_note);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_sound_intensity(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Voice Level", configuration.dexed[selected_instance_id].sound_intensity, 1.0, SOUND_INTENSITY_MIN, SOUND_INTENSITY_MAX, 3, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].sound_intensity = constrain(configuration.dexed[selected_instance_id].sound_intensity + ENCODER[ENC_R].speed(), SOUND_INTENSITY_MIN, SOUND_INTENSITY_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].sound_intensity = constrain(configuration.dexed[selected_instance_id].sound_intensity - ENCODER[ENC_R].speed(), SOUND_INTENSITY_MIN, SOUND_INTENSITY_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("Voice Level", configuration.dexed[selected_instance_id].sound_intensity, 1.0, SOUND_INTENSITY_MIN, SOUND_INTENSITY_MAX, 3, false, false, false);
|
|
|
|
MicroDexed[selected_instance_id]->fx.Gain = pseudo_log_curve(mapfloat(configuration.dexed[selected_instance_id].sound_intensity, SOUND_INTENSITY_MIN, SOUND_INTENSITY_MAX, 0.0, SOUND_INTENSITY_AMP_MAX));
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].sound_intensity), configuration.dexed[0].sound_intensity);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].sound_intensity), configuration.dexed[1].sound_intensity);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_panorama(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
if (configuration.sys.mono > 0)
|
|
{
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Panorama"));
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("MONO-disabled"));
|
|
return;
|
|
}
|
|
lcd_special_chars(METERBAR);
|
|
lcd_display_meter_float("Panorama", configuration.dexed[selected_instance_id].pan, 0.05, -20.0, PANORAMA_MIN, PANORAMA_MAX, 1, 1, false, true, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if (LCDML.BT_checkDown() && encoderDir[ENC_R].Down() && configuration.sys.mono == 0)
|
|
configuration.dexed[selected_instance_id].pan = constrain(configuration.dexed[selected_instance_id].pan + ENCODER[ENC_R].speed(), PANORAMA_MIN, PANORAMA_MAX);
|
|
else if (LCDML.BT_checkUp() && encoderDir[ENC_R].Up() && configuration.sys.mono == 0)
|
|
configuration.dexed[selected_instance_id].pan = constrain(configuration.dexed[selected_instance_id].pan - ENCODER[ENC_R].speed(), PANORAMA_MIN, PANORAMA_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
|
|
if (configuration.sys.mono == 0)
|
|
{
|
|
lcd_display_meter_float("Panorama", configuration.dexed[selected_instance_id].pan, 0.05, -20.0, PANORAMA_MIN, PANORAMA_MAX, 1, 1, false, true, false);
|
|
mono2stereo[selected_instance_id]->panorama(mapfloat(configuration.dexed[selected_instance_id].pan, PANORAMA_MIN, PANORAMA_MAX, -1.0, 1.0));
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].pan), configuration.dexed[0].pan);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].pan), configuration.dexed[1].pan);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_stereo_mono(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Stereo/Mono"));
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.sys.mono)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[STEREO]"));
|
|
stereo2mono.stereo(true);
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[MONO ]"));
|
|
stereo2mono.stereo(false);
|
|
break;
|
|
case 2:
|
|
lcd.print(F("[MONO-R]"));
|
|
stereo2mono.stereo(false);
|
|
break;
|
|
case 3:
|
|
lcd.print(F("[MONO-L]"));
|
|
stereo2mono.stereo(false);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.sys.mono = constrain(configuration.sys.mono + 1, MONO_MIN, MONO_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.sys.mono = constrain(configuration.sys.mono - 1, MONO_MIN, MONO_MAX);
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.sys.mono)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[STEREO]"));
|
|
stereo2mono.stereo(true);
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[MONO ]"));
|
|
stereo2mono.stereo(false);
|
|
break;
|
|
case 2:
|
|
lcd.print(F("[MONO-R]"));
|
|
stereo2mono.stereo(false);
|
|
break;
|
|
case 3:
|
|
lcd.print(F("[MONO-L]"));
|
|
stereo2mono.stereo(false);
|
|
break;
|
|
}
|
|
set_volume(configuration.sys.vol, configuration.sys.mono);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, sys.mono), configuration.sys.mono);
|
|
}
|
|
}
|
|
|
|
void UI_func_polyphony(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Polyphony", configuration.dexed[selected_instance_id].polyphony, 1.0, POLYPHONY_MIN, POLYPHONY_MAX, 2, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
#if NUM_DEXED > 1
|
|
if (configuration.dexed[0].polyphony + configuration.dexed[1].polyphony + 1 <= POLYPHONY_MAX)
|
|
#endif
|
|
configuration.dexed[selected_instance_id].polyphony = constrain(configuration.dexed[selected_instance_id].polyphony + 1, POLYPHONY_MIN, POLYPHONY_MAX);
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
if (configuration.dexed[selected_instance_id].polyphony - 1 < 0)
|
|
configuration.dexed[selected_instance_id].polyphony = 0;
|
|
else
|
|
configuration.dexed[selected_instance_id].polyphony = constrain(configuration.dexed[selected_instance_id].polyphony - 1, POLYPHONY_MIN, POLYPHONY_MAX);
|
|
}
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
lcd_active_instance_number(selected_instance_id);
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("Polyphony", configuration.dexed[selected_instance_id].polyphony, 1.0, POLYPHONY_MIN, POLYPHONY_MAX, 2, false, false, false);
|
|
|
|
MicroDexed[selected_instance_id]->setMaxNotes(configuration.dexed[selected_instance_id].polyphony);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].polyphony), configuration.dexed[0].polyphony);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].polyphony), configuration.dexed[1].polyphony);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_engine(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Engine"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].engine = constrain(configuration.dexed[selected_instance_id].engine + 1, ENGINE_MIN, ENGINE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].engine = constrain(configuration.dexed[selected_instance_id].engine - 1, ENGINE_MIN, ENGINE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
MicroDexed[selected_instance_id]->setEngineType(configuration.dexed[selected_instance_id].engine);
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.dexed[selected_instance_id].engine)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[MODERN]"));
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[MARK 1]"));
|
|
break;
|
|
case 2:
|
|
lcd.print(F("[OPL ]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].engine), configuration.dexed[0].engine);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].engine), configuration.dexed[1].engine);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_mono_poly(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Mono/Polyphonic"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].monopoly = constrain(configuration.dexed[selected_instance_id].monopoly + 1, MONOPOLY_MIN, MONOPOLY_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].monopoly = constrain(configuration.dexed[selected_instance_id].monopoly - 1, MONOPOLY_MIN, MONOPOLY_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
lcd_active_instance_number(selected_instance_id);
|
|
#endif
|
|
}
|
|
|
|
MicroDexed[selected_instance_id]->setMonoMode(!configuration.dexed[selected_instance_id].monopoly);
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.dexed[selected_instance_id].monopoly)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[MONOPHONIC]"));
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[POLYPHONIC]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].monopoly), configuration.dexed[0].monopoly);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].monopoly), configuration.dexed[1].monopoly);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_note_refresh(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Note Refresh"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].note_refresh = constrain(configuration.dexed[selected_instance_id].note_refresh + 1, NOTE_REFRESH_MIN, NOTE_REFRESH_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].note_refresh = constrain(configuration.dexed[selected_instance_id].note_refresh - 1, NOTE_REFRESH_MIN, NOTE_REFRESH_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
MicroDexed[selected_instance_id]->setRefreshMode(configuration.dexed[selected_instance_id].note_refresh);
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.dexed[selected_instance_id].note_refresh)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[NORMAL ]"));
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[RETRIGGERED]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].note_refresh), configuration.dexed[0].note_refresh);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].note_refresh), configuration.dexed[1].note_refresh);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_pb_range(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("PB Range", configuration.dexed[selected_instance_id].pb_range, 1.0, PB_RANGE_MIN, PB_RANGE_MAX, 2, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].pb_range = constrain(configuration.dexed[selected_instance_id].pb_range + ENCODER[ENC_R].speed(), PB_RANGE_MIN, PB_RANGE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].pb_range = constrain(configuration.dexed[selected_instance_id].pb_range - ENCODER[ENC_R].speed(), PB_RANGE_MIN, PB_RANGE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("PB Range", configuration.dexed[selected_instance_id].pb_range, 1.0, PB_RANGE_MIN, PB_RANGE_MAX, 2, false, false, false);
|
|
|
|
MicroDexed[selected_instance_id]->setPBController(configuration.dexed[selected_instance_id].pb_range, configuration.dexed[selected_instance_id].pb_step);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].pb_range), configuration.dexed[0].pb_range);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].pb_range), configuration.dexed[1].pb_range);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_pb_step(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("PB Step", configuration.dexed[selected_instance_id].pb_step, 1.0, PB_STEP_MIN, PB_STEP_MAX, 2, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].pb_step = constrain(configuration.dexed[selected_instance_id].pb_step + ENCODER[ENC_R].speed(), PB_STEP_MIN, PB_STEP_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].pb_step = constrain(configuration.dexed[selected_instance_id].pb_step - ENCODER[ENC_R].speed(), PB_STEP_MIN, PB_STEP_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("PB Step", configuration.dexed[selected_instance_id].pb_step, 1.0, PB_STEP_MIN, PB_STEP_MAX, 2, false, false, false);
|
|
|
|
MicroDexed[selected_instance_id]->setPBController(configuration.dexed[selected_instance_id].pb_range, configuration.dexed[selected_instance_id].pb_step);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].pb_step), configuration.dexed[0].pb_step);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].pb_step), configuration.dexed[1].pb_step);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_mw_range(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("MW Range", configuration.dexed[selected_instance_id].mw_range, 1.0, MW_RANGE_MIN, MW_RANGE_MAX, 2, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].mw_range = constrain(configuration.dexed[selected_instance_id].mw_range + ENCODER[ENC_R].speed(), MW_RANGE_MIN, MW_RANGE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].mw_range = constrain(configuration.dexed[selected_instance_id].mw_range - ENCODER[ENC_R].speed(), MW_RANGE_MIN, MW_RANGE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("MW Range", configuration.dexed[selected_instance_id].mw_range, 1.0, MW_RANGE_MIN, MW_RANGE_MAX, 2, false, false, false);
|
|
|
|
MicroDexed[selected_instance_id]->setMWController(configuration.dexed[selected_instance_id].mw_range, configuration.dexed[selected_instance_id].mw_assign, configuration.dexed[selected_instance_id].mw_mode);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].mw_range), configuration.dexed[0].mw_range);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].mw_range), configuration.dexed[1].mw_range);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_mw_assign(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("MW Assign"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].mw_assign = constrain(configuration.dexed[selected_instance_id].mw_assign + 1, MW_ASSIGN_MIN, MW_ASSIGN_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].mw_assign = constrain(configuration.dexed[selected_instance_id].mw_assign - 1, MW_ASSIGN_MIN, MW_ASSIGN_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
MicroDexed[selected_instance_id]->setMWController(configuration.dexed[selected_instance_id].mw_range, configuration.dexed[selected_instance_id].mw_assign, configuration.dexed[selected_instance_id].mw_mode);
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.dexed[selected_instance_id].mw_assign)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[ NONE ]"));
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[PTCH ]"));
|
|
break;
|
|
case 2:
|
|
lcd.print(F("[ AMP ]"));
|
|
break;
|
|
case 3:
|
|
lcd.print(F("[PTCH AMP ]"));
|
|
break;
|
|
case 4:
|
|
lcd.print(F("[ EG]"));
|
|
break;
|
|
case 5:
|
|
lcd.print(F("[PTCH EG]"));
|
|
break;
|
|
case 6:
|
|
lcd.print(F("[ AMP EG]"));
|
|
break;
|
|
case 7:
|
|
lcd.print(F("[PTCH AMP EG]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].mw_assign), configuration.dexed[0].mw_assign);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].mw_assign), configuration.dexed[1].mw_assign);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_mw_mode(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("MW Mode"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].mw_mode = constrain(configuration.dexed[selected_instance_id].mw_mode + 1, MW_MODE_MIN, MW_MODE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].mw_mode = constrain(configuration.dexed[selected_instance_id].mw_mode - 1, MW_MODE_MIN, MW_MODE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
MicroDexed[selected_instance_id]->setMWController(configuration.dexed[selected_instance_id].mw_range, configuration.dexed[selected_instance_id].mw_assign, configuration.dexed[selected_instance_id].mw_mode);
|
|
MicroDexed[selected_instance_id]->controllers.refresh();
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.dexed[selected_instance_id].mw_mode)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[LINEAR ]"));
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[REVERSE LIN.]"));
|
|
break;
|
|
case 2:
|
|
lcd.print(F("[DIRECT ]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].mw_mode), configuration.dexed[0].mw_mode);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].mw_mode), configuration.dexed[1].mw_mode);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_fc_range(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("FC Range", configuration.dexed[selected_instance_id].fc_range, 1.0, FC_RANGE_MIN, FC_RANGE_MAX, 2, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].fc_range = constrain(configuration.dexed[selected_instance_id].fc_range + ENCODER[ENC_R].speed(), FC_RANGE_MIN, FC_RANGE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].fc_range = constrain(configuration.dexed[selected_instance_id].fc_range - ENCODER[ENC_R].speed(), FC_RANGE_MIN, FC_RANGE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("FC Range", configuration.dexed[selected_instance_id].fc_range, 1.0, FC_RANGE_MIN, FC_RANGE_MAX, 2, false, false, false);
|
|
|
|
MicroDexed[selected_instance_id]->setFCController(configuration.dexed[selected_instance_id].fc_range, configuration.dexed[selected_instance_id].fc_assign, configuration.dexed[selected_instance_id].fc_mode);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].fc_range), configuration.dexed[0].fc_range);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].fc_range), configuration.dexed[1].fc_range);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_fc_assign(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("FC Assign"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].fc_assign = constrain(configuration.dexed[selected_instance_id].fc_assign + 1, FC_ASSIGN_MIN, FC_ASSIGN_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].fc_assign = constrain(configuration.dexed[selected_instance_id].fc_assign - 1, FC_ASSIGN_MIN, FC_ASSIGN_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
MicroDexed[selected_instance_id]->setFCController(configuration.dexed[selected_instance_id].fc_range, configuration.dexed[selected_instance_id].fc_assign, configuration.dexed[selected_instance_id].fc_mode);
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.dexed[selected_instance_id].fc_assign)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[ NONE ]"));
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[PTCH ]"));
|
|
break;
|
|
case 2:
|
|
lcd.print(F("[ AMP ]"));
|
|
break;
|
|
case 3:
|
|
lcd.print(F("[PTCH AMP ]"));
|
|
break;
|
|
case 4:
|
|
lcd.print(F("[ EG]"));
|
|
break;
|
|
case 5:
|
|
lcd.print(F("[PTCH EG]"));
|
|
break;
|
|
case 6:
|
|
lcd.print(F("[ AMP EG]"));
|
|
break;
|
|
case 7:
|
|
lcd.print(F("[PTCH AMP EG]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].fc_assign), configuration.dexed[0].fc_assign);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].fc_assign), configuration.dexed[1].fc_assign);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_fc_mode(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("FC Mode"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].fc_mode = constrain(configuration.dexed[selected_instance_id].fc_mode + 1, FC_MODE_MIN, FC_MODE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].fc_mode = constrain(configuration.dexed[selected_instance_id].fc_mode - 1, FC_MODE_MIN, FC_MODE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
MicroDexed[selected_instance_id]->setFCController(configuration.dexed[selected_instance_id].fc_range, configuration.dexed[selected_instance_id].fc_assign, configuration.dexed[selected_instance_id].fc_mode);
|
|
MicroDexed[selected_instance_id]->controllers.refresh();
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.dexed[selected_instance_id].fc_mode)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[LINEAR ]"));
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[REVERSE LIN.]"));
|
|
break;
|
|
case 2:
|
|
lcd.print(F("[DIRECT ]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].fc_mode), configuration.dexed[0].fc_mode);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].fc_mode), configuration.dexed[1].fc_mode);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_bc_range(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("BC Range", configuration.dexed[selected_instance_id].bc_range, 1.0, BC_RANGE_MIN, BC_RANGE_MAX, 2, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].bc_range = constrain(configuration.dexed[selected_instance_id].bc_range + ENCODER[ENC_R].speed(), BC_RANGE_MIN, BC_RANGE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].bc_range = constrain(configuration.dexed[selected_instance_id].bc_range - ENCODER[ENC_R].speed(), BC_RANGE_MIN, BC_RANGE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("BC Range", configuration.dexed[selected_instance_id].bc_range, 1.0, BC_RANGE_MIN, BC_RANGE_MAX, 2, false, false, false);
|
|
|
|
MicroDexed[selected_instance_id]->setBCController(configuration.dexed[selected_instance_id].bc_range, configuration.dexed[selected_instance_id].bc_assign, configuration.dexed[selected_instance_id].bc_mode);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].bc_range), configuration.dexed[0].bc_range);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].bc_range), configuration.dexed[1].bc_range);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_bc_assign(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("BC Assign"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].bc_assign = constrain(configuration.dexed[selected_instance_id].bc_assign + 1, BC_ASSIGN_MIN, BC_ASSIGN_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].bc_assign = constrain(configuration.dexed[selected_instance_id].bc_assign - 1, BC_ASSIGN_MIN, BC_ASSIGN_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
MicroDexed[selected_instance_id]->setBCController(configuration.dexed[selected_instance_id].bc_range, configuration.dexed[selected_instance_id].bc_assign, configuration.dexed[selected_instance_id].bc_mode);
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.dexed[selected_instance_id].bc_assign)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[ NONE ]"));
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[PTCH ]"));
|
|
break;
|
|
case 2:
|
|
lcd.print(F("[ AMP ]"));
|
|
break;
|
|
case 3:
|
|
lcd.print(F("[PTCH AMP ]"));
|
|
break;
|
|
case 4:
|
|
lcd.print(F("[ EG]"));
|
|
break;
|
|
case 5:
|
|
lcd.print(F("[PTCH EG]"));
|
|
break;
|
|
case 6:
|
|
lcd.print(F("[ AMP EG]"));
|
|
break;
|
|
case 7:
|
|
lcd.print(F("[PTCH AMP EG]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].bc_assign), configuration.dexed[0].bc_assign);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].bc_assign), configuration.dexed[1].bc_assign);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_bc_mode(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("BC Mode"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].bc_mode = constrain(configuration.dexed[selected_instance_id].bc_mode + 1, BC_MODE_MIN, BC_MODE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].bc_mode = constrain(configuration.dexed[selected_instance_id].bc_mode - 1, BC_MODE_MIN, BC_MODE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
MicroDexed[selected_instance_id]->setBCController(configuration.dexed[selected_instance_id].bc_range, configuration.dexed[selected_instance_id].bc_assign, configuration.dexed[selected_instance_id].bc_mode);
|
|
MicroDexed[selected_instance_id]->controllers.refresh();
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.dexed[selected_instance_id].bc_mode)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[LINEAR ]"));
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[REVERSE LIN.]"));
|
|
break;
|
|
case 2:
|
|
lcd.print(F("[DIRECT ]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].bc_mode), configuration.dexed[0].bc_mode);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].bc_mode), configuration.dexed[1].bc_mode);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_at_range(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("AT Range", configuration.dexed[selected_instance_id].at_range, 1.0, AT_RANGE_MIN, AT_RANGE_MAX, 2, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].at_range = constrain(configuration.dexed[selected_instance_id].at_range + ENCODER[ENC_R].speed(), AT_RANGE_MIN, AT_RANGE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].at_range = constrain(configuration.dexed[selected_instance_id].at_range - ENCODER[ENC_R].speed(), AT_RANGE_MIN, AT_RANGE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("AT Range", configuration.dexed[selected_instance_id].at_range, 1.0, AT_RANGE_MIN, AT_RANGE_MAX, 2, false, false, false);
|
|
|
|
MicroDexed[selected_instance_id]->setATController(configuration.dexed[selected_instance_id].at_range, configuration.dexed[selected_instance_id].at_assign, configuration.dexed[selected_instance_id].at_mode);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].at_range), configuration.dexed[0].at_range);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].at_range), configuration.dexed[1].at_range);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_at_assign(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("AT Assign"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].at_assign = constrain(configuration.dexed[selected_instance_id].at_assign + 1, AT_ASSIGN_MIN, AT_ASSIGN_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].at_assign = constrain(configuration.dexed[selected_instance_id].at_assign - 1, AT_ASSIGN_MIN, AT_ASSIGN_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
MicroDexed[selected_instance_id]->setATController(configuration.dexed[selected_instance_id].at_range, configuration.dexed[selected_instance_id].at_assign, configuration.dexed[selected_instance_id].at_mode);
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.dexed[selected_instance_id].at_assign)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[ NONE ]"));
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[PTCH ]"));
|
|
break;
|
|
case 2:
|
|
lcd.print(F("[ AMP ]"));
|
|
break;
|
|
case 3:
|
|
lcd.print(F("[PTCH AMP ]"));
|
|
break;
|
|
case 4:
|
|
lcd.print(F("[ EG]"));
|
|
break;
|
|
case 5:
|
|
lcd.print(F("[PTCH EG]"));
|
|
break;
|
|
case 6:
|
|
lcd.print(F("[ AMP EG]"));
|
|
break;
|
|
case 7:
|
|
lcd.print(F("[PTCH AMP EG]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].at_assign), configuration.dexed[0].at_assign);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].at_assign), configuration.dexed[1].at_assign);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_at_mode(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("AT Mode"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].at_mode = constrain(configuration.dexed[selected_instance_id].at_mode + 1, AT_MODE_MIN, AT_MODE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].at_mode = constrain(configuration.dexed[selected_instance_id].at_mode - 1, AT_MODE_MIN, AT_MODE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
MicroDexed[selected_instance_id]->setATController(configuration.dexed[selected_instance_id].at_range, configuration.dexed[selected_instance_id].at_assign, configuration.dexed[selected_instance_id].at_mode);
|
|
MicroDexed[selected_instance_id]->controllers.refresh();
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.dexed[selected_instance_id].at_mode)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[LINEAR ]"));
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[REVERSE LIN.]"));
|
|
break;
|
|
case 2:
|
|
lcd.print(F("[DIRECT ]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].at_mode), configuration.dexed[0].at_mode);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].at_mode), configuration.dexed[1].at_mode);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_portamento_mode(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Portamento Mode"));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].portamento_mode = constrain(configuration.dexed[selected_instance_id].portamento_mode + 1, PORTAMENTO_MODE_MIN, PORTAMENTO_MODE_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].portamento_mode = constrain(configuration.dexed[selected_instance_id].portamento_mode - 1, PORTAMENTO_MODE_MIN, PORTAMENTO_MODE_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
MicroDexed[selected_instance_id]->setPortamentoMode(configuration.dexed[selected_instance_id].portamento_mode, configuration.dexed[selected_instance_id].portamento_glissando, configuration.dexed[selected_instance_id].portamento_time);
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.dexed[selected_instance_id].portamento_mode)
|
|
{
|
|
case 0:
|
|
if (configuration.dexed[selected_instance_id].monopoly == 1)
|
|
lcd.print(F("[RETAIN ]"));
|
|
else
|
|
lcd.print(F("[FINGERED]"));
|
|
break;
|
|
case 1:
|
|
if (configuration.dexed[selected_instance_id].monopoly == 1)
|
|
lcd.print(F("[FOLLOW ]"));
|
|
else
|
|
lcd.print(F("[FULL ]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].portamento_mode), configuration.dexed[0].portamento_mode);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].portamento_mode), configuration.dexed[1].portamento_mode);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_portamento_glissando(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Portam. Gliss."));
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].portamento_glissando = constrain(configuration.dexed[selected_instance_id].portamento_glissando + 1, PORTAMENTO_GLISSANDO_MIN, PORTAMENTO_GLISSANDO_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].portamento_glissando = constrain(configuration.dexed[selected_instance_id].portamento_glissando - 1, PORTAMENTO_GLISSANDO_MIN, PORTAMENTO_GLISSANDO_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
MicroDexed[selected_instance_id]->setPortamentoMode(configuration.dexed[selected_instance_id].portamento_mode, configuration.dexed[selected_instance_id].portamento_glissando, configuration.dexed[selected_instance_id].portamento_time);
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.dexed[selected_instance_id].portamento_glissando)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[OFF]"));
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[ON ]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].portamento_glissando), configuration.dexed[0].portamento_glissando);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].portamento_glissando), configuration.dexed[1].portamento_glissando);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_portamento_time(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Portam. Time", configuration.dexed[selected_instance_id].portamento_time, 1.0, PORTAMENTO_TIME_MIN, PORTAMENTO_TIME_MAX, 2, false, false, true);
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].portamento_time = constrain(configuration.dexed[selected_instance_id].portamento_time + ENCODER[ENC_R].speed(), PORTAMENTO_TIME_MIN, PORTAMENTO_TIME_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].portamento_time = constrain(configuration.dexed[selected_instance_id].portamento_time - ENCODER[ENC_R].speed(), PORTAMENTO_TIME_MIN, PORTAMENTO_TIME_MAX);
|
|
#if NUM_DEXED > 1
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
lcd_display_bar_int("Portam. Time", configuration.dexed[selected_instance_id].portamento_time, 1.0, PORTAMENTO_TIME_MIN, PORTAMENTO_TIME_MAX, 2, false, false, false);
|
|
|
|
MicroDexed[selected_instance_id]->setPortamentoMode(configuration.dexed[selected_instance_id].portamento_mode, configuration.dexed[selected_instance_id].portamento_glissando, configuration.dexed[selected_instance_id].portamento_time);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].portamento_time), configuration.dexed[0].portamento_time);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].portamento_time), configuration.dexed[1].portamento_time);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_handle_OP(uint8_t param)
|
|
{
|
|
static uint8_t op_selected;
|
|
|
|
lcd_OP_active_instance_number(selected_instance_id, configuration.dexed[selected_instance_id].op_enabled);
|
|
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Operator Enable"));
|
|
lcd.setCursor(0, 1);
|
|
for (uint8_t i = 2; i < 8; i++)
|
|
lcd.write(i);
|
|
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
|
|
lcd.setCursor(op_selected, 1);
|
|
lcd.blink();
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if (LCDML.BT_checkUp() && encoderDir[ENC_R].Up())
|
|
{
|
|
#if NUM_DEXED>1
|
|
if (op_selected == 0)
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
op_selected = 5;
|
|
lcd_OP_active_instance_number(selected_instance_id, configuration.dexed[selected_instance_id].op_enabled);
|
|
}
|
|
else
|
|
#endif
|
|
op_selected = constrain(op_selected - 1, 0, 5);
|
|
}
|
|
else if (LCDML.BT_checkDown() && encoderDir[ENC_R].Down())
|
|
{
|
|
#if NUM_DEXED>1
|
|
if (op_selected == 5)
|
|
{
|
|
selected_instance_id = !selected_instance_id;
|
|
op_selected = 0;
|
|
lcd_OP_active_instance_number(selected_instance_id, configuration.dexed[selected_instance_id].op_enabled);
|
|
}
|
|
else
|
|
#endif
|
|
op_selected = constrain(op_selected + 1, 0, 5);
|
|
}
|
|
else if (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort())
|
|
{
|
|
if (bitRead(configuration.dexed[selected_instance_id].op_enabled, op_selected))
|
|
bitClear(configuration.dexed[selected_instance_id].op_enabled, op_selected);
|
|
else
|
|
bitSet(configuration.dexed[selected_instance_id].op_enabled, op_selected);
|
|
|
|
lcd_OP_active_instance_number(selected_instance_id, configuration.dexed[selected_instance_id].op_enabled);
|
|
}
|
|
|
|
lcd.setCursor(op_selected, 1);
|
|
|
|
MicroDexed[selected_instance_id]->setOPs(configuration.dexed[selected_instance_id].op_enabled);
|
|
MicroDexed[selected_instance_id]->doRefreshVoice();
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd.noBlink();
|
|
lcd.noCursor();
|
|
lcd_special_chars(SCROLLBAR);
|
|
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].op_enabled), configuration.dexed[0].op_enabled);
|
|
#if NUM_DEXED > 1
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].op_enabled), configuration.dexed[1].op_enabled);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_information(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
char version_string[LCD_cols + 1];
|
|
|
|
encoderDir[ENC_R].reset();
|
|
|
|
generate_version_string(version_string, sizeof(version_string));
|
|
|
|
// setup function
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(version_string);
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(sd_string);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
;
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_midi_soft_thru(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("MIDI Soft THRU"));
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.sys.soft_midi_thru = constrain(configuration.sys.soft_midi_thru + 1, SOFT_MIDI_THRU_MIN, SOFT_MIDI_THRU_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.sys.soft_midi_thru = constrain(configuration.sys.soft_midi_thru - 1, SOFT_MIDI_THRU_MIN, SOFT_MIDI_THRU_MAX);
|
|
}
|
|
|
|
lcd.setCursor(0, 1);
|
|
switch (configuration.sys.soft_midi_thru)
|
|
{
|
|
case 0:
|
|
lcd.print(F("[OFF]"));
|
|
break;
|
|
case 1:
|
|
lcd.print(F("[ON ]"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, sys.soft_midi_thru), configuration.sys.soft_midi_thru);
|
|
}
|
|
}
|
|
|
|
void UI_func_velocity_level(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Velocity Lvl", configuration.dexed[selected_instance_id].velocity_level, 1.0, VELOCITY_LEVEL_MIN, VELOCITY_LEVEL_MAX, 3, false, false, true);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
configuration.dexed[selected_instance_id].velocity_level = constrain(configuration.dexed[selected_instance_id].velocity_level + ENCODER[ENC_R].speed(), VELOCITY_LEVEL_MIN, VELOCITY_LEVEL_MAX);
|
|
else if (LCDML.BT_checkUp())
|
|
configuration.dexed[selected_instance_id].velocity_level = constrain(configuration.dexed[selected_instance_id].velocity_level - ENCODER[ENC_R].speed(), VELOCITY_LEVEL_MIN, VELOCITY_LEVEL_MAX);
|
|
}
|
|
|
|
lcd_display_bar_int("Velocity Lvl", configuration.dexed[selected_instance_id].velocity_level, 1.0, VELOCITY_LEVEL_MIN, VELOCITY_LEVEL_MAX, 3, false, false, false);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
if (selected_instance_id == 0)
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[0].velocity_level), configuration.dexed[0].velocity_level);
|
|
#if NUM_DEXED > 1
|
|
else
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, dexed[1].velocity_level), configuration.dexed[1].velocity_level);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_eeprom_reset(uint8_t param)
|
|
{
|
|
static bool yesno = false;
|
|
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
// setup function
|
|
lcd.print("Reset EEPROM?");
|
|
lcd.setCursor(0, 1);
|
|
lcd.print("[NO ]");
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
yesno = true;
|
|
else if (LCDML.BT_checkUp())
|
|
yesno = false;
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
if (yesno == true)
|
|
{
|
|
LCDML.DISP_clear();
|
|
lcd.print("EEPROM Reset:");
|
|
|
|
initial_values_from_eeprom(true);
|
|
|
|
lcd.setCursor(0, 1);
|
|
lcd.print("Done.");
|
|
delay(MESSAGE_WAIT_TIME);
|
|
_softRestart();
|
|
}
|
|
}
|
|
|
|
if (yesno == true)
|
|
{
|
|
lcd.setCursor(1, 1);
|
|
lcd.print("YES");
|
|
}
|
|
else
|
|
{
|
|
lcd.setCursor(1, 1);
|
|
lcd.print("NO ");
|
|
}
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd.setCursor(0, 1);
|
|
lcd.print("Canceled ");
|
|
delay(MESSAGE_WAIT_TIME);
|
|
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_voice_select(uint8_t param)
|
|
{
|
|
static uint8_t menu_voice_select = MENU_VOICE_SOUND;
|
|
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
|
|
char bank_name[BANK_NAME_LEN];
|
|
char voice_name[VOICE_NAME_LEN];
|
|
|
|
if (!get_bank_name(configuration.performance.bank[selected_instance_id], bank_name, sizeof(bank_name)))
|
|
strncpy(bank_name, "*ERROR*", sizeof(bank_name));
|
|
if (!get_voice_by_bank_name(configuration.performance.bank[selected_instance_id], bank_name, configuration.performance.voice[selected_instance_id], voice_name, sizeof(voice_name)))
|
|
strncpy(voice_name, "*ERROR*", sizeof(voice_name));
|
|
|
|
lcd.setCursor(14, 0);
|
|
lcd.write(0);
|
|
lcd.setCursor(15, 0);
|
|
lcd.write(1);
|
|
|
|
#ifdef TEENSY3_6
|
|
lcd.createChar(6, (uint8_t*)special_chars[16]); // MIDI activity note symbol
|
|
lcd.createChar(7, (uint8_t*)special_chars[16]); // MIDI activity note symbol
|
|
#endif
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
char bank_name[BANK_NAME_LEN];
|
|
char voice_name[VOICE_NAME_LEN];
|
|
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
uint8_t bank_tmp;
|
|
int8_t voice_tmp;
|
|
|
|
if (LCDML.BT_checkUp())
|
|
{
|
|
switch (menu_voice_select)
|
|
{
|
|
case MENU_VOICE_BANK:
|
|
memset(g_bank_name[selected_instance_id], 0, BANK_NAME_LEN);
|
|
bank_tmp = constrain(configuration.performance.bank[selected_instance_id] - ENCODER[ENC_R].speed(), 0, MAX_BANKS - 1);
|
|
configuration.performance.bank[selected_instance_id] = bank_tmp;
|
|
#ifdef DISPLAY_LCD_SPI
|
|
change_disp_sd(false);
|
|
#endif
|
|
load_sd_voice(configuration.performance.bank[selected_instance_id], configuration.performance.voice[selected_instance_id], selected_instance_id);
|
|
#ifdef DISPLAY_LCD_SPI
|
|
change_disp_sd(true);
|
|
#endif
|
|
break;
|
|
case MENU_VOICE_SOUND:
|
|
memset(g_voice_name[selected_instance_id], 0, VOICE_NAME_LEN);
|
|
voice_tmp = configuration.performance.voice[selected_instance_id] - ENCODER[ENC_R].speed();
|
|
if (voice_tmp < 0 && configuration.performance.bank[selected_instance_id] - 1 >= 0)
|
|
{
|
|
configuration.performance.bank[selected_instance_id]--;
|
|
configuration.performance.bank[selected_instance_id] = constrain(configuration.performance.bank[selected_instance_id], 0, MAX_BANKS - 1);
|
|
}
|
|
else if (voice_tmp < 0 && configuration.performance.bank[selected_instance_id] - 1 <= 0)
|
|
{
|
|
voice_tmp = 0;
|
|
}
|
|
if (voice_tmp < 0)
|
|
voice_tmp = MAX_VOICES + voice_tmp;
|
|
configuration.performance.voice[selected_instance_id] = constrain(voice_tmp, 0, MAX_VOICES - 1);
|
|
|
|
#ifdef DISPLAY_LCD_SPI
|
|
change_disp_sd(false);
|
|
#endif
|
|
load_sd_voice(configuration.performance.bank[selected_instance_id], configuration.performance.voice[selected_instance_id], selected_instance_id);
|
|
#ifdef DISPLAY_LCD_SPI
|
|
change_disp_sd(true);
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
else if (LCDML.BT_checkDown())
|
|
{
|
|
switch (menu_voice_select)
|
|
{
|
|
case MENU_VOICE_BANK:
|
|
memset(g_bank_name[selected_instance_id], 0, BANK_NAME_LEN);
|
|
bank_tmp = constrain(configuration.performance.bank[selected_instance_id] + ENCODER[ENC_R].speed(), 0, MAX_BANKS - 1);
|
|
configuration.performance.bank[selected_instance_id] = bank_tmp;
|
|
#ifdef DISPLAY_LCD_SPI
|
|
change_disp_sd(false);
|
|
#endif
|
|
load_sd_voice(configuration.performance.bank[selected_instance_id], configuration.performance.voice[selected_instance_id], selected_instance_id);
|
|
#ifdef DISPLAY_LCD_SPI
|
|
change_disp_sd(true);
|
|
#endif
|
|
break;
|
|
case MENU_VOICE_SOUND:
|
|
memset(g_voice_name[selected_instance_id], 0, VOICE_NAME_LEN);
|
|
voice_tmp = configuration.performance.voice[selected_instance_id] + ENCODER[ENC_R].speed();
|
|
if (voice_tmp >= MAX_VOICES && configuration.performance.bank[selected_instance_id] + 1 < MAX_BANKS)
|
|
{
|
|
voice_tmp %= MAX_VOICES;
|
|
configuration.performance.bank[selected_instance_id]++;
|
|
configuration.performance.bank[selected_instance_id] = constrain(configuration.performance.bank[selected_instance_id], 0, MAX_BANKS - 1);
|
|
}
|
|
else if (voice_tmp >= MAX_VOICES && configuration.performance.bank[selected_instance_id] + 1 >= MAX_BANKS)
|
|
{
|
|
voice_tmp = MAX_VOICES - 1;
|
|
}
|
|
configuration.performance.voice[selected_instance_id] = constrain(voice_tmp, 0, MAX_VOICES - 1);
|
|
|
|
#ifdef DISPLAY_LCD_SPI
|
|
change_disp_sd(false);
|
|
#endif
|
|
load_sd_voice(configuration.performance.bank[selected_instance_id], configuration.performance.voice[selected_instance_id], selected_instance_id);
|
|
#ifdef DISPLAY_LCD_SPI
|
|
change_disp_sd(true);
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
if (menu_voice_select == MENU_VOICE_BANK)
|
|
menu_voice_select = MENU_VOICE_SOUND;
|
|
else
|
|
menu_voice_select = MENU_VOICE_BANK;
|
|
}
|
|
}
|
|
|
|
if (strlen(g_bank_name[selected_instance_id]) > 0)
|
|
{
|
|
strncpy(bank_name, g_bank_name[selected_instance_id], sizeof(bank_name));
|
|
}
|
|
else
|
|
{
|
|
if (!get_bank_name(configuration.performance.bank[selected_instance_id], bank_name, sizeof(bank_name)))
|
|
strncpy(bank_name, "*ERROR*", sizeof(bank_name));
|
|
}
|
|
|
|
if (strlen(g_voice_name[selected_instance_id]) > 0)
|
|
{
|
|
strncpy(voice_name, g_voice_name[selected_instance_id], sizeof(voice_name));
|
|
}
|
|
else
|
|
{
|
|
if (!get_voice_by_bank_name(configuration.performance.bank[selected_instance_id], bank_name, configuration.performance.voice[selected_instance_id], voice_name, sizeof(voice_name)))
|
|
strncpy(voice_name, "*ERROR*", sizeof(voice_name));
|
|
}
|
|
|
|
lcd.show(0, 0, 2, configuration.performance.bank[selected_instance_id]);
|
|
lcd.show(1, 0, 2, configuration.performance.voice[selected_instance_id] + 1);
|
|
lcd.show(0, 3, 10, bank_name);
|
|
lcd.show(1, 3, 10, voice_name);
|
|
|
|
switch (menu_voice_select)
|
|
{
|
|
case MENU_VOICE_BANK:
|
|
lcd.show(0, 2, 1, "[");
|
|
lcd.show(0, 13, 1, "]");
|
|
lcd.show(1, 2, 1, " ");
|
|
lcd.show(1, 13, 1, " ");
|
|
break;
|
|
case MENU_VOICE_SOUND:
|
|
lcd.show(0, 2, 1, " ");
|
|
lcd.show(0, 13, 1, " ");
|
|
lcd.show(1, 2, 1, "[");
|
|
lcd.show(1, 13, 1, "]");
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
|
|
encoderDir[ENC_R].reset();
|
|
if (selected_instance_id == 0)
|
|
{
|
|
//eeprom_update_var(offsetof(configuration_s, performance.voice[0]), configuration.performance.voice[0], "configuration.performance.voice[0]");
|
|
//eeprom_update_var(offsetof(configuration_s, performance.bank[0]), configuration.performance.bank[0], "configuration.performance.bank[0]");
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, performance.voice[0]), configuration.performance.voice[0]);
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, performance.bank[0]), configuration.performance.bank[0]);
|
|
}
|
|
#if NUM_DEXED > 1
|
|
else
|
|
{
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, performance.voice[1]), configuration.performance.voice[1]);
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, performance.bank[1]), configuration.performance.bank[1]);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void UI_func_volume(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_L].reset();
|
|
|
|
lcd_special_chars(BLOCKBAR);
|
|
lcd_display_bar_int("Master Vol.", configuration.sys.vol, 1.0, VOLUME_MIN, VOLUME_MAX, 3, false, false, true);
|
|
|
|
back_from_volume = 0;
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_L].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_L].Up()))
|
|
{
|
|
back_from_volume = 0;
|
|
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
configuration.sys.vol = constrain(configuration.sys.vol + ENCODER[ENC_L].speed(), VOLUME_MIN, VOLUME_MAX);
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
configuration.sys.vol = constrain(configuration.sys.vol - ENCODER[ENC_L].speed(), VOLUME_MIN, VOLUME_MAX);
|
|
}
|
|
}
|
|
|
|
lcd_display_bar_int("Master Vol.", configuration.sys.vol, 1.0, VOLUME_MIN, VOLUME_MAX, 3, false, false, false);
|
|
set_volume(configuration.sys.vol, configuration.sys.mono);
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, sys.vol), configuration.sys.vol);
|
|
encoderDir[ENC_L].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_load_performance(uint8_t param)
|
|
{
|
|
static uint8_t mode;
|
|
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
char tmp[10];
|
|
|
|
mode = 0;
|
|
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Load Perf. SD"));
|
|
lcd.setCursor(0, 1);
|
|
sprintf(tmp, "[%2d]", configuration.sys.performance_number);
|
|
lcd.print(tmp);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
configuration.sys.performance_number = constrain(configuration.sys.performance_number + ENCODER[ENC_L].speed(), PERFORMANCE_NUM_MIN, PERFORMANCE_NUM_MAX);
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
configuration.sys.performance_number = constrain(configuration.sys.performance_number - ENCODER[ENC_L].speed(), PERFORMANCE_NUM_MIN, PERFORMANCE_NUM_MAX);
|
|
}
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
mode = 0xff;
|
|
|
|
lcd.setCursor(0, 1);
|
|
if (load_sd_performance(configuration.sys.performance_number) == false)
|
|
lcd.print("Does not exist.");
|
|
else
|
|
{
|
|
load_sd_voice(configuration.performance.bank[0], configuration.performance.voice[0], 0);
|
|
load_sd_voiceconfig(configuration.performance.voiceconfig_number[0], 0);
|
|
set_voiceconfig_params(0);
|
|
#if NUM_DEXED > 1
|
|
set_voiceconfig_params(1);
|
|
load_sd_voice(configuration.performance.bank[0], configuration.performance.voice[1], 1);
|
|
load_sd_voiceconfig(configuration.performance.voiceconfig_number[1], 1);
|
|
#endif
|
|
load_sd_fx(configuration.performance.fx_number);
|
|
set_fx_params();
|
|
|
|
lcd.print("Done. ");
|
|
}
|
|
delay(MESSAGE_WAIT_TIME);
|
|
|
|
LCDML.FUNC_goBackToMenu();
|
|
}
|
|
|
|
lcd.setCursor(0, 1);
|
|
char tmp[10];
|
|
sprintf(tmp, "[%2d]", configuration.sys.performance_number);
|
|
lcd.print(tmp);
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
if (mode < 0xff)
|
|
{
|
|
lcd.show(1, 0, 16, "Canceled.");
|
|
delay(MESSAGE_WAIT_TIME);
|
|
}
|
|
else
|
|
eeprom_update_performance();
|
|
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_save_performance(uint8_t param)
|
|
{
|
|
static bool overwrite;
|
|
static bool yesno;
|
|
static uint8_t mode;
|
|
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
char tmp[FILENAME_LEN];
|
|
|
|
yesno = false;
|
|
mode = 0;
|
|
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Save Perf. SD"));
|
|
lcd.setCursor(0, 1);
|
|
sprintf(tmp, "[%2d]", configuration.sys.performance_number);
|
|
lcd.print(tmp);
|
|
|
|
sprintf(tmp, "/%s/%s%d.syx", PERFORMANCE_CONFIG_PATH, PERFORMANCE_CONFIG_NAME, configuration.sys.performance_number);
|
|
if (SD.exists(tmp))
|
|
overwrite = true;
|
|
else
|
|
overwrite = false;
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
if (mode == 0)
|
|
configuration.sys.performance_number = constrain(configuration.sys.performance_number + ENCODER[ENC_L].speed(), PERFORMANCE_NUM_MIN, PERFORMANCE_NUM_MAX);
|
|
else
|
|
yesno = true;
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
if (mode == 0)
|
|
configuration.sys.performance_number = constrain(configuration.sys.performance_number - ENCODER[ENC_L].speed(), PERFORMANCE_NUM_MIN, PERFORMANCE_NUM_MAX);
|
|
else
|
|
yesno = false;
|
|
}
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
if (mode == 0 && overwrite == true)
|
|
{
|
|
mode = 1;
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("Overwrite: [ ]"));
|
|
}
|
|
else
|
|
{
|
|
mode = 0xff;
|
|
if (overwrite == false || yesno == true)
|
|
{
|
|
if (yesno == true)
|
|
{
|
|
char tmp[FILENAME_LEN];
|
|
sprintf(tmp, "/%s/%s%d.syx", PERFORMANCE_CONFIG_PATH, PERFORMANCE_CONFIG_NAME, configuration.sys.performance_number);
|
|
SD.remove(tmp);
|
|
}
|
|
save_sd_performance(configuration.sys.performance_number);
|
|
lcd.show(1, 0, 16, "Done.");
|
|
delay(MESSAGE_WAIT_TIME);
|
|
LCDML.FUNC_goBackToMenu();
|
|
}
|
|
else if (overwrite == true && yesno == false)
|
|
{
|
|
char tmp[17];
|
|
|
|
mode = 0;
|
|
lcd.setCursor(0, 1);
|
|
sprintf(tmp, "[%2d] ", configuration.sys.performance_number);
|
|
lcd.print(tmp);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (mode == 0)
|
|
{
|
|
char tmp[FILENAME_LEN];
|
|
sprintf(tmp, "/%s/%s%d.syx", PERFORMANCE_CONFIG_PATH, PERFORMANCE_CONFIG_NAME, configuration.sys.performance_number);
|
|
if (SD.exists(tmp))
|
|
overwrite = true;
|
|
else
|
|
overwrite = false;
|
|
|
|
lcd.setCursor(0, 1);
|
|
sprintf(tmp, "[%2d]", configuration.sys.performance_number);
|
|
lcd.print(tmp);
|
|
}
|
|
else
|
|
{
|
|
lcd.setCursor(12, 1);
|
|
if (yesno == true)
|
|
lcd.print(F("YES"));
|
|
else
|
|
lcd.print(F("NO "));
|
|
}
|
|
}
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
if (mode < 0xff)
|
|
{
|
|
lcd.show(1, 0, 16, "Canceled.");
|
|
delay(MESSAGE_WAIT_TIME);
|
|
}
|
|
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(sys_s, performance_number), configuration.sys.performance_number);
|
|
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_load_voiceconfig(uint8_t param)
|
|
{
|
|
#if NUMDEXED > 1
|
|
static int8_t selected_instance_id;
|
|
#else
|
|
uint8_t selected_instance_id = 0;
|
|
#endif
|
|
|
|
static uint8_t mode;
|
|
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
char tmp[10];
|
|
|
|
selected_instance_id = 0;
|
|
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Load VoiceCfg SD"));
|
|
#if NUMDEXED > 1
|
|
mode = 0;
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("Instance [0]"));
|
|
#else
|
|
mode = 1;
|
|
lcd.setCursor(0, 1);
|
|
sprintf(tmp, "[%2d]", configuration.performance.voiceconfig_number[selected_instance_id]);
|
|
lcd.print(tmp);
|
|
#endif
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
if (mode == 0)
|
|
selected_instance_id = (selected_instance_id + 1) % 2;
|
|
else if (mode == 1)
|
|
configuration.performance.voiceconfig_number[selected_instance_id] = constrain(configuration.performance.voiceconfig_number[selected_instance_id] + ENCODER[ENC_L].speed(), VOICECONFIG_NUM_MIN, VOICECONFIG_NUM_MAX);
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
if (mode == 0)
|
|
selected_instance_id = (selected_instance_id - 1) % 2;
|
|
else if (mode == 1)
|
|
configuration.performance.voiceconfig_number[selected_instance_id] = constrain(configuration.performance.voiceconfig_number[selected_instance_id] - ENCODER[ENC_L].speed(), VOICECONFIG_NUM_MIN, VOICECONFIG_NUM_MAX);
|
|
}
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
mode = 0xff;
|
|
lcd.setCursor(0, 1);
|
|
if (load_sd_voiceconfig(configuration.performance.voiceconfig_number[selected_instance_id], selected_instance_id) == false)
|
|
lcd.print("Does not exist. ");
|
|
else
|
|
lcd.print("Done. ");
|
|
|
|
delay(MESSAGE_WAIT_TIME);
|
|
|
|
LCDML.FUNC_goBackToMenu();
|
|
}
|
|
|
|
if (mode == 0)
|
|
{
|
|
lcd.setCursor(10, 1);
|
|
lcd.print(selected_instance_id);
|
|
}
|
|
else if (mode == 1)
|
|
{
|
|
lcd.setCursor(0, 1);
|
|
char tmp[10];
|
|
sprintf(tmp, "[%2d]", configuration.performance.voiceconfig_number[selected_instance_id]);
|
|
lcd.print(tmp);
|
|
}
|
|
}
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
if (mode < 0xff)
|
|
{
|
|
lcd.show(1, 0, 16, "Canceled.");
|
|
delay(MESSAGE_WAIT_TIME);
|
|
}
|
|
else
|
|
eeprom_update_dexed(selected_instance_id);
|
|
|
|
#if NUM_DEXED > 1
|
|
if (selected_instance_id > 0)
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(performance_s, voiceconfig_number[1]), configuration.performance.voiceconfig_number[1]);
|
|
else
|
|
#endif
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(performance_s, voiceconfig_number[0]), configuration.performance.voiceconfig_number[0]);
|
|
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_save_voiceconfig(uint8_t param)
|
|
{
|
|
#if NUMDEXED > 1
|
|
static int8_t selected_instance_id;
|
|
#else
|
|
uint8_t selected_instance_id = 0;
|
|
#endif
|
|
|
|
static bool overwrite;
|
|
static bool yesno;
|
|
static uint8_t mode;
|
|
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
char tmp[FILENAME_LEN];
|
|
|
|
yesno = false;
|
|
selected_instance_id = 0;
|
|
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Save VoiceCfg SD"));
|
|
#if NUMDEXED > 1
|
|
mode = 0;
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("Instance [0]"));
|
|
#else
|
|
mode = 1;
|
|
lcd.setCursor(0, 1);
|
|
sprintf(tmp, "[%2d]", configuration.performance.voiceconfig_number[selected_instance_id]);
|
|
lcd.print(tmp);
|
|
|
|
sprintf(tmp, "/%s/%s%d.syx", VOICE_CONFIG_PATH, VOICE_CONFIG_NAME, configuration.performance.voiceconfig_number[selected_instance_id]);
|
|
if (SD.exists(tmp))
|
|
overwrite = true;
|
|
else
|
|
overwrite = false;
|
|
#endif
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
if (mode == 0)
|
|
selected_instance_id = (selected_instance_id + 1) % 2;
|
|
else if (mode == 1)
|
|
configuration.performance.voiceconfig_number[selected_instance_id] = constrain(configuration.performance.voiceconfig_number[selected_instance_id] + ENCODER[ENC_L].speed(), VOICECONFIG_NUM_MIN, VOICECONFIG_NUM_MAX);
|
|
else
|
|
yesno = true;
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
if (mode == 0)
|
|
selected_instance_id = (selected_instance_id - 1) % 2;
|
|
else if (mode == 1)
|
|
configuration.performance.voiceconfig_number[selected_instance_id] = constrain(configuration.performance.voiceconfig_number[selected_instance_id] - ENCODER[ENC_L].speed(), VOICECONFIG_NUM_MIN, VOICECONFIG_NUM_MAX);
|
|
else
|
|
yesno = false;
|
|
}
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
if (mode == 1 && overwrite == true)
|
|
{
|
|
mode = 2;
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("Overwrite: [ ]"));
|
|
}
|
|
else
|
|
{
|
|
mode = 0xff;
|
|
if (overwrite == false || yesno == true)
|
|
{
|
|
if (yesno == true)
|
|
{
|
|
char tmp[FILENAME_LEN];
|
|
sprintf(tmp, "/%s/%s%d.syx", VOICE_CONFIG_PATH, VOICE_CONFIG_NAME, configuration.performance.voiceconfig_number[selected_instance_id]);
|
|
SD.remove(tmp);
|
|
}
|
|
save_sd_voiceconfig(configuration.performance.voiceconfig_number[selected_instance_id], selected_instance_id);
|
|
lcd.show(1, 0, 16, "Done.");
|
|
delay(MESSAGE_WAIT_TIME);
|
|
LCDML.FUNC_goBackToMenu();
|
|
}
|
|
else if (overwrite == true && yesno == false)
|
|
{
|
|
char tmp[17];
|
|
|
|
mode = 1;
|
|
lcd.setCursor(0, 1);
|
|
sprintf(tmp, "[%2d] ", configuration.performance.voiceconfig_number[selected_instance_id]);
|
|
lcd.print(tmp);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (mode == 0)
|
|
{
|
|
lcd.setCursor(10, 1);
|
|
lcd.print(configuration.performance.voiceconfig_number[selected_instance_id]);
|
|
}
|
|
else if (mode == 1)
|
|
{
|
|
char tmp[FILENAME_LEN];
|
|
|
|
sprintf(tmp, "/%s/%s%d.syx", VOICE_CONFIG_PATH, VOICE_CONFIG_NAME, configuration.performance.voiceconfig_number[selected_instance_id]);
|
|
if (SD.exists(tmp))
|
|
overwrite = true;
|
|
else
|
|
overwrite = false;
|
|
|
|
lcd.setCursor(0, 1);
|
|
sprintf(tmp, "[%2d]", configuration.performance.voiceconfig_number[selected_instance_id]);
|
|
lcd.print(tmp);
|
|
}
|
|
else if (mode == 2)
|
|
{
|
|
lcd.setCursor(12, 1);
|
|
if (yesno == true)
|
|
lcd.print(F("YES"));
|
|
else
|
|
lcd.print(F("NO "));
|
|
}
|
|
}
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
if (mode < 0xff)
|
|
{
|
|
lcd.show(1, 0, 16, "Canceled.");
|
|
delay(MESSAGE_WAIT_TIME);
|
|
}
|
|
|
|
#if NUM_DEXED > 1
|
|
if (selected_instance_id > 0)
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(performance_s, voiceconfig_number[1]), configuration.performance.voiceconfig_number[1]);
|
|
else
|
|
#endif
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(performance_s, voiceconfig_number[0]), configuration.performance.voiceconfig_number[0]);
|
|
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_load_fx(uint8_t param)
|
|
{
|
|
static uint8_t mode;
|
|
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
char tmp[10];
|
|
|
|
mode = 0;
|
|
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Load FX SD"));
|
|
lcd.setCursor(0, 1);
|
|
sprintf(tmp, "[%2d]", configuration.performance.fx_number);
|
|
lcd.print(tmp);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
configuration.performance.fx_number = constrain(configuration.performance.fx_number + ENCODER[ENC_L].speed(), FX_NUM_MIN, FX_NUM_MAX);
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
configuration.performance.fx_number = constrain(configuration.performance.fx_number - ENCODER[ENC_L].speed(), FX_NUM_MIN, FX_NUM_MAX);
|
|
}
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
mode = 0xff;
|
|
|
|
lcd.setCursor(0, 1);
|
|
if (load_sd_fx(configuration.performance.fx_number) == false)
|
|
lcd.print("Does not exist. ");
|
|
else
|
|
lcd.print("Done. ");
|
|
|
|
delay(MESSAGE_WAIT_TIME);
|
|
|
|
LCDML.FUNC_goBackToMenu();
|
|
}
|
|
|
|
lcd.setCursor(0, 1);
|
|
char tmp[10];
|
|
sprintf(tmp, "[%2d]", configuration.performance.fx_number);
|
|
lcd.print(tmp);
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
if (mode < 0xff)
|
|
{
|
|
lcd.show(1, 0, 16, "Canceled.");
|
|
delay(MESSAGE_WAIT_TIME);
|
|
}
|
|
else
|
|
eeprom_update_fx();
|
|
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(performance_s, fx_number), configuration.performance.fx_number);
|
|
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_save_fx(uint8_t param)
|
|
{
|
|
static bool overwrite;
|
|
static bool yesno;
|
|
static uint8_t mode;
|
|
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
char tmp[FILENAME_LEN];
|
|
|
|
yesno = false;
|
|
mode = 0;
|
|
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Save FX"));
|
|
lcd.setCursor(0, 1);
|
|
sprintf(tmp, "[%2d]", configuration.performance.fx_number);
|
|
lcd.print(tmp);
|
|
|
|
sprintf(tmp, "/%s/%s%d.syx", FX_CONFIG_PATH, FX_CONFIG_NAME, configuration.performance.fx_number);
|
|
if (SD.exists(tmp))
|
|
overwrite = true;
|
|
else
|
|
overwrite = false;
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()) || (LCDML.BT_checkEnter() && encoderDir[ENC_R].ButtonShort()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
if (mode == 0)
|
|
configuration.performance.fx_number = constrain(configuration.performance.fx_number + ENCODER[ENC_L].speed(), FX_NUM_MIN, FX_NUM_MAX);
|
|
else
|
|
yesno = true;
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
if (mode == 0)
|
|
configuration.performance.fx_number = constrain(configuration.performance.fx_number - ENCODER[ENC_L].speed(), FX_NUM_MIN, FX_NUM_MAX);
|
|
else
|
|
yesno = false;
|
|
}
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
if (mode == 0 && overwrite == true)
|
|
{
|
|
mode = 1;
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("Overwrite: [ ]"));
|
|
}
|
|
else
|
|
{
|
|
mode = 0xff;
|
|
if (overwrite == false || yesno == true)
|
|
{
|
|
if (yesno == true)
|
|
{
|
|
char tmp[FILENAME_LEN];
|
|
sprintf(tmp, "/%s/%s%d.syx", FX_CONFIG_PATH, FX_CONFIG_NAME, configuration.performance.fx_number);
|
|
SD.remove(tmp);
|
|
}
|
|
save_sd_fx(configuration.performance.fx_number);
|
|
|
|
lcd.show(1, 0, 16, "Done.");
|
|
LCDML.FUNC_goBackToMenu();
|
|
delay(MESSAGE_WAIT_TIME);
|
|
}
|
|
else if (overwrite == true && yesno == false)
|
|
{
|
|
char tmp[17];
|
|
|
|
mode = 0;
|
|
lcd.setCursor(0, 1);
|
|
sprintf(tmp, "[%2d] ", configuration.performance.fx_number);
|
|
lcd.print(tmp);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (mode == 0)
|
|
{
|
|
char tmp[FILENAME_LEN];
|
|
sprintf(tmp, "/%s/%s%d.syx", FX_CONFIG_PATH, FX_CONFIG_NAME, configuration.performance.fx_number);
|
|
if (SD.exists(tmp))
|
|
overwrite = true;
|
|
else
|
|
overwrite = false;
|
|
|
|
lcd.setCursor(0, 1);
|
|
sprintf(tmp, "[%2d]", configuration.performance.fx_number);
|
|
lcd.print(tmp);
|
|
}
|
|
else
|
|
{
|
|
lcd.setCursor(12, 1);
|
|
if (yesno == true)
|
|
lcd.print(F("YES"));
|
|
else
|
|
lcd.print(F("NO "));
|
|
}
|
|
}
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
if (mode < 0xff)
|
|
{
|
|
lcd.show(1, 0, 16, "Canceled.");
|
|
delay(MESSAGE_WAIT_TIME);
|
|
}
|
|
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(performance_s, fx_number), configuration.performance.fx_number);
|
|
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_save_voice(uint8_t param)
|
|
{
|
|
static bool yesno;
|
|
static uint8_t mode;
|
|
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
yesno = false;
|
|
#if NUM_DEXED == 1
|
|
mode = 1;
|
|
#else
|
|
mode = 0;
|
|
#endif
|
|
|
|
#if NUM_DEXED == 1
|
|
char bank_name[BANK_NAME_LEN];
|
|
|
|
if (!get_bank_name(configuration.performance.bank[selected_instance_id], bank_name, sizeof(bank_name)))
|
|
strncpy(bank_name, "*ERROR*", sizeof(bank_name));
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Save to Bank"));
|
|
lcd.show(1, 0, 2, configuration.performance.bank[selected_instance_id]);
|
|
lcd.show(1, 4, 10, bank_name);
|
|
lcd.show(1, 2, 2, " [");
|
|
lcd.show(1, 14, 1, "]");
|
|
#else
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Save Instance"));
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(5, 1);
|
|
lcd.write(0);
|
|
lcd.setCursor(10, 1);
|
|
lcd.write(1);
|
|
#endif
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
char bank_name[BANK_NAME_LEN];
|
|
char voice_name[VOICE_NAME_LEN];
|
|
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()))
|
|
{
|
|
switch (mode)
|
|
{
|
|
case 0: // Instance selection
|
|
if (LCDML.BT_checkDown() || LCDML.BT_checkUp())
|
|
selected_instance_id = !selected_instance_id;
|
|
|
|
lcd_active_instance_number(selected_instance_id);
|
|
lcd.setCursor(5, 1);
|
|
lcd.write(0);
|
|
lcd.setCursor(10, 1);
|
|
lcd.write(1);
|
|
break;
|
|
case 1: // Bank selection
|
|
if (LCDML.BT_checkDown())
|
|
configuration.performance.bank[selected_instance_id] = constrain(configuration.performance.bank[selected_instance_id] + ENCODER[ENC_R].speed(), 0, MAX_BANKS - 1);
|
|
else if (LCDML.BT_checkUp() && configuration.performance.bank[selected_instance_id] > 0)
|
|
configuration.performance.bank[selected_instance_id] = constrain(configuration.performance.bank[selected_instance_id] - ENCODER[ENC_R].speed(), 0, MAX_BANKS - 1);
|
|
|
|
if (!get_bank_name(configuration.performance.bank[selected_instance_id], bank_name, sizeof(bank_name)))
|
|
strncpy(bank_name, "*ERROR*", sizeof(bank_name));
|
|
|
|
lcd.show(1, 0, 2, configuration.performance.bank[selected_instance_id]);
|
|
lcd.show(1, 4, 10, bank_name);
|
|
break;
|
|
case 2: // Voice selection
|
|
if (LCDML.BT_checkDown() && configuration.performance.voice[selected_instance_id] < MAX_VOICES - 1)
|
|
configuration.performance.voice[selected_instance_id] = constrain(configuration.performance.voice[selected_instance_id] + ENCODER[ENC_R].speed(), 0, MAX_VOICES - 1);
|
|
else if (LCDML.BT_checkUp() && configuration.performance.voice[selected_instance_id] > 0)
|
|
configuration.performance.voice[selected_instance_id] = constrain(configuration.performance.voice[selected_instance_id] - ENCODER[ENC_R].speed(), 0, MAX_VOICES - 1);
|
|
|
|
if (!get_bank_name(configuration.performance.bank[selected_instance_id], bank_name, sizeof(bank_name)))
|
|
strncpy(bank_name, "*ERROR*", sizeof(bank_name));
|
|
if (!get_voice_by_bank_name(configuration.performance.bank[selected_instance_id], bank_name, configuration.performance.voice[selected_instance_id], voice_name, sizeof(voice_name)))
|
|
strncpy(voice_name, "*ERROR*", sizeof(voice_name));
|
|
|
|
lcd.show(1, 0, 2, configuration.performance.voice[selected_instance_id] + 1);
|
|
lcd.show(1, 4, 10, voice_name);
|
|
break;
|
|
case 3: // Yes/No selection
|
|
yesno = !yesno;
|
|
if (yesno == true)
|
|
{
|
|
lcd.show(1, 1, 3, "YES");
|
|
}
|
|
else
|
|
{
|
|
lcd.show(1, 1, 3, "NO");
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
else if (LCDML.BT_checkEnter())
|
|
{
|
|
if (encoderDir[ENC_R].ButtonShort())
|
|
mode++;
|
|
switch (mode)
|
|
{
|
|
case 1:
|
|
if (!get_bank_name(configuration.performance.bank[selected_instance_id], bank_name, sizeof(bank_name)))
|
|
strncpy(bank_name, "*ERROR*", sizeof(bank_name));
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Save to Bank"));
|
|
lcd.show(1, 0, 2, configuration.performance.bank[selected_instance_id]);
|
|
lcd.show(1, 4, 10, bank_name);
|
|
lcd.show(1, 2, 2, " [");
|
|
lcd.show(1, 14, 1, "]");
|
|
break;
|
|
case 2:
|
|
if (!get_bank_name(configuration.performance.bank[selected_instance_id], bank_name, sizeof(bank_name)))
|
|
strncpy(bank_name, "*ERROR*", sizeof(bank_name));
|
|
if (!get_voice_by_bank_name(configuration.performance.bank[selected_instance_id], bank_name, configuration.performance.voice[selected_instance_id], voice_name, sizeof(voice_name)))
|
|
strncpy(voice_name, "*ERROR*", sizeof(voice_name));
|
|
|
|
lcd.show(0, 0, 16, "Save to Bank");
|
|
lcd.show(0, 13, 2, configuration.performance.bank[selected_instance_id]);
|
|
lcd.show(1, 0, 2, configuration.performance.voice[selected_instance_id] + 1);
|
|
lcd.show(1, 4, 10, voice_name);
|
|
break;
|
|
case 3:
|
|
lcd.show(0, 0, 16, "Overwrite?");
|
|
lcd.show(1, 0, 15, "[NO");
|
|
lcd.show(1, 4, 1, "]");
|
|
break;
|
|
default:
|
|
if (yesno == true)
|
|
{
|
|
#ifdef DEBUG
|
|
bool ret = save_sd_voice(configuration.performance.bank[selected_instance_id], configuration.performance.voice[selected_instance_id], selected_instance_id);
|
|
|
|
if (ret == true)
|
|
Serial.println(F("Saving voice OK."));
|
|
else
|
|
Serial.println(F("Error while saving voice."));
|
|
#else
|
|
save_sd_voice(configuration.performance.bank[selected_instance_id], configuration.performance.voice[selected_instance_id], selected_instance_id);
|
|
#endif
|
|
|
|
lcd.show(1, 0, 16, "Done.");
|
|
delay(MESSAGE_WAIT_TIME);
|
|
|
|
mode = 0xff;
|
|
break;
|
|
}
|
|
|
|
LCDML.FUNC_goBackToMenu();
|
|
}
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
if (mode < 0xff)
|
|
{
|
|
lcd.show(1, 0, 16, "Canceled.");
|
|
delay(MESSAGE_WAIT_TIME);
|
|
}
|
|
else
|
|
{
|
|
if (selected_instance_id == 0)
|
|
{
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, performance.voice[0]), configuration.performance.voice[0]);
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, performance.bank[0]), configuration.performance.bank[0]);
|
|
}
|
|
#if NUM_DEXED > 1
|
|
else
|
|
{
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, performance.voice[0]), configuration.performance.voice[1]);
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, performance.bank[0]), configuration.performance.bank[1]);
|
|
}
|
|
#endif
|
|
}
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_sysex_receive_bank(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("MIDI Recv Bank"));
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("Not implemented."));
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
;
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_sysex_send_bank(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("MIDI Send Bank"));
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("Not implemented."));
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
;
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_sysex_send_voice(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("MIDI Send Voice"));
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("Not implemented."));
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
;
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_sysex_receive_voice(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("MIDI Receive Voice"));
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("Not implemented."));
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
;
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_func_eq_bass(uint8_t param)
|
|
{
|
|
#ifndef SGTL5000_AUDIO_ENHANCE
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("EQ Bass"));
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("Not implemented."));
|
|
}
|
|
#else
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
lcd_special_chars(METERBAR);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
configuration.fx.eq_bass = constrain(configuration.fx.eq_bass + ENCODER[ENC_R].speed(), EQ_BASS_MIN, EQ_BASS_MAX);
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
configuration.fx.eq_bass = constrain(configuration.fx.eq_bass - ENCODER[ENC_R].speed(), EQ_BASS_MIN, EQ_BASS_MAX);
|
|
}
|
|
}
|
|
lcd_display_meter_float("EQ Bass", configuration.fx.eq_bass, 0.1, 0.0, EQ_BASS_MIN, EQ_BASS_MAX, 1, 1, false, true, true);
|
|
sgtl5000_1.eqBands(mapfloat(configuration.fx.eq_bass, EQ_BASS_MIN, EQ_BASS_MAX, -1.0, 1.0), mapfloat(configuration.fx.eq_treble, EQ_TREBLE_MIN, EQ_TREBLE_MAX, -1.0, 1.0));
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.eq_bass), configuration.fx.eq_bass);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void UI_func_eq_treble(uint8_t param)
|
|
{
|
|
#ifndef SGTL5000_AUDIO_ENHANCE
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("EQ Bass"));
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("Not implemented."));
|
|
}
|
|
#else
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
lcd_special_chars(METERBAR);
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
if ((LCDML.BT_checkDown() && encoderDir[ENC_R].Down()) || (LCDML.BT_checkUp() && encoderDir[ENC_R].Up()))
|
|
{
|
|
if (LCDML.BT_checkDown())
|
|
{
|
|
configuration.fx.eq_treble = constrain(configuration.fx.eq_treble + ENCODER[ENC_R].speed(), EQ_TREBLE_MIN, EQ_TREBLE_MAX);
|
|
}
|
|
else if (LCDML.BT_checkUp())
|
|
{
|
|
configuration.fx.eq_treble = constrain(configuration.fx.eq_treble - ENCODER[ENC_R].speed(), EQ_TREBLE_MIN, EQ_TREBLE_MAX);
|
|
}
|
|
}
|
|
lcd_display_meter_float("EQ TREBLE", configuration.fx.eq_treble, 0.1, 0.0, EQ_TREBLE_MIN, EQ_TREBLE_MAX, 1, 1, false, true, true);
|
|
sgtl5000_1.eqBands(mapfloat(configuration.fx.eq_treble, EQ_TREBLE_MIN, EQ_TREBLE_MAX, -1.0, 1.0), mapfloat(configuration.fx.eq_treble, EQ_TREBLE_MIN, EQ_TREBLE_MAX, -1.0, 1.0));
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
lcd_special_chars(SCROLLBAR);
|
|
encoderDir[ENC_R].reset();
|
|
EEPROM.update(EEPROM_START_ADDRESS + offsetof(configuration_s, fx.eq_treble), configuration.fx.eq_treble);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void UI_function_not_enabled(void)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Function not"));
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("enbaled!"));
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
;
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void UI_function_not_implemented(uint8_t param)
|
|
{
|
|
if (LCDML.FUNC_setup()) // ****** SETUP *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(F("Function not"));
|
|
lcd.setCursor(0, 1);
|
|
lcd.print(F("implemented!"));
|
|
}
|
|
|
|
if (LCDML.FUNC_loop()) // ****** LOOP *********
|
|
{
|
|
;
|
|
}
|
|
|
|
if (LCDML.FUNC_close()) // ****** STABLE END *********
|
|
{
|
|
encoderDir[ENC_R].reset();
|
|
}
|
|
}
|
|
|
|
void lcd_display_int(int16_t var, uint8_t size, bool zeros, bool brackets, bool sign)
|
|
{
|
|
lcd_display_float(float(var), size, 0, zeros, brackets, sign);
|
|
}
|
|
|
|
void lcd_display_float(float var, uint8_t size_number, uint8_t size_fraction, bool zeros, bool brackets, bool sign)
|
|
{
|
|
char s[LCD_cols + 1];
|
|
char f[LCD_cols + 1];
|
|
|
|
if (size_fraction > 0)
|
|
{
|
|
if (zeros == true && sign == true)
|
|
sprintf(f, "%%+0%d.%df", size_number + size_fraction + 2, size_fraction);
|
|
else if (zeros == true && sign == false)
|
|
sprintf(f, "%%+0%d.%df", size_number + size_fraction + 1, size_fraction);
|
|
else if (zeros == false && sign == true)
|
|
sprintf(f, "%%+%d.%df", size_number + size_fraction + 2, size_fraction);
|
|
else if (zeros == false && sign == false)
|
|
sprintf(f, "%%%d.%df", size_number + size_fraction + 1, size_fraction);
|
|
|
|
sprintf(s, f, var);
|
|
}
|
|
else
|
|
{
|
|
if (zeros == true && sign == true)
|
|
sprintf(f, "%%+0%dd", size_number + 1);
|
|
else if (zeros == true && sign == false)
|
|
sprintf(f, "%%%0dd", size_number);
|
|
else if (zeros == false && sign == true)
|
|
sprintf(f, "%%+%dd", size_number + 1);
|
|
else if (zeros == false && sign == false)
|
|
sprintf(f, "%%%dd", size_number);
|
|
|
|
sprintf(s, f, int(var));
|
|
}
|
|
|
|
if (brackets == true)
|
|
{
|
|
char tmp[LCD_cols + 1];
|
|
|
|
strcpy(tmp, s);
|
|
sprintf(s, "[%s]", tmp);
|
|
}
|
|
|
|
lcd.print(s);
|
|
}
|
|
|
|
inline void lcd_display_bar_int(const char* title, uint32_t value, float factor, int32_t min_value, int32_t max_value, uint8_t size, bool zeros, bool sign, bool init)
|
|
{
|
|
lcd_display_bar_float(title, float(value), factor, min_value, max_value, size, 0, zeros, sign, init);
|
|
}
|
|
|
|
void lcd_display_bar_float(const char* title, float value, float factor, int32_t min_value, int32_t max_value, uint8_t size_number, uint8_t size_fraction, bool zeros, bool sign, bool init)
|
|
{
|
|
uint8_t size;
|
|
float v;
|
|
float _vi = 0.0;
|
|
uint8_t vf;
|
|
uint8_t vi;
|
|
|
|
if (size_fraction == 0)
|
|
size = size_number;
|
|
else
|
|
size = size_number + size_fraction + 1;
|
|
if (sign == true)
|
|
size++;
|
|
|
|
v = float((value - min_value) * (LCD_cols - size)) / (max_value - min_value);
|
|
vf = uint8_t(modff(v, &_vi) * 10.0 + 0.5);
|
|
vi = uint8_t(_vi);
|
|
|
|
if (sign == true)
|
|
size += 1;
|
|
|
|
// Title
|
|
if (init == true)
|
|
lcd.show(0, 0, LCD_cols - 3, title);
|
|
|
|
// Value
|
|
lcd.setCursor(LCD_cols - size, 1);
|
|
lcd_display_float(value * factor, size_number, size_fraction, zeros, false, sign); // TBD
|
|
|
|
// Bar
|
|
lcd.setCursor(0, 1);
|
|
|
|
if (vi == 0)
|
|
{
|
|
lcd.write((uint8_t)(vf / 2.0 - 0.5) + 2);
|
|
for (uint8_t i = vi + 1; i < LCD_cols - size; i++)
|
|
lcd.print(F(" ")); // empty block
|
|
}
|
|
else
|
|
{
|
|
for (uint8_t i = 0; i < vi; i++)
|
|
lcd.write((uint8_t)4 + 2); // full block
|
|
if (vi < LCD_cols - size)
|
|
lcd.write((uint8_t)(vf / 2.0 - 0.5) + 2);
|
|
for (uint8_t i = vi + 1; i < LCD_cols - size; i++)
|
|
lcd.print(F(" ")); // empty block
|
|
}
|
|
}
|
|
|
|
inline void lcd_display_meter_int(const char* title, uint32_t value, float factor, float offset, int32_t min_value, int32_t max_value, uint8_t size, bool zeros, bool sign, bool init)
|
|
{
|
|
lcd_display_meter_float(title, float(value), factor, offset, min_value, max_value, size, 0, zeros, sign, init);
|
|
}
|
|
|
|
void lcd_display_meter_float(const char* title, float value, float factor, float offset, int32_t min_value, int32_t max_value, uint8_t size_number, uint8_t size_fraction, bool zeros, bool sign, bool init)
|
|
{
|
|
uint8_t size = 0;
|
|
float v;
|
|
float _vi = 0.0;
|
|
uint8_t vf;
|
|
uint8_t vi;
|
|
|
|
if (size_fraction == 0)
|
|
size = size_number;
|
|
else
|
|
size = size_number + size_fraction + 1;
|
|
if (sign == true)
|
|
size++;
|
|
|
|
v = float((value - min_value) * (LCD_cols - size)) / (max_value - min_value);
|
|
vf = uint8_t(modff(v, &_vi) * 10.0 + 0.5);
|
|
vi = uint8_t(_vi);
|
|
|
|
if (init == true)
|
|
{
|
|
// Title
|
|
lcd.setCursor(0, 0);
|
|
lcd.print(title);
|
|
}
|
|
|
|
// Value
|
|
lcd.setCursor(LCD_cols - size, 1);
|
|
lcd_display_float((value + offset) * factor, size_number, size_fraction, zeros, false, sign);
|
|
|
|
// Bar
|
|
lcd.setCursor(0, 1);
|
|
|
|
if (vi == 0)
|
|
{
|
|
lcd.write((uint8_t)(vf / 2.0) + 2);
|
|
for (uint8_t i = 1; i < LCD_cols - size; i++)
|
|
lcd.print(F(" ")); // empty block
|
|
}
|
|
else if (vi == LCD_cols - size)
|
|
{
|
|
for (uint8_t i = 0; i < LCD_cols - size - 1; i++)
|
|
lcd.print(F(" ")); // empty block
|
|
lcd.write(4 + 2);
|
|
}
|
|
else
|
|
{
|
|
for (uint8_t i = 0; i < LCD_cols - size; i++)
|
|
lcd.print(F(" ")); // empty block
|
|
lcd.setCursor(vi, 1);
|
|
lcd.write((uint8_t)(vf / 2.0) + 2);
|
|
for (uint8_t i = vi + 1; i < LCD_cols - size; i++)
|
|
lcd.print(F(" ")); // empty block
|
|
}
|
|
}
|
|
|
|
uint8_t bit_reverse8(uint8_t v)
|
|
{
|
|
uint8_t result = 0;
|
|
for ( ; v > 0; v >>= 1 )
|
|
(result <<= 1) |= (v & 1);
|
|
return (result);
|
|
}
|
|
|
|
void lcd_active_instance_number(uint8_t instance_id)
|
|
{
|
|
for (uint8_t i = 0; i < 8; i++)
|
|
{
|
|
if (instance_id == 0)
|
|
{
|
|
if (configuration.dexed[instance_id].polyphony == 0)
|
|
instance_num[0][i] = bit_reverse8(special_chars[0][i]);
|
|
else
|
|
instance_num[0][i] = special_chars[0][i];
|
|
|
|
if (configuration.dexed[!instance_id].polyphony == 0)
|
|
{
|
|
instance_num[1][i] = bit_reverse8(special_chars[1][i]);
|
|
instance_num[1][i] = ~instance_num[1][i];
|
|
}
|
|
else
|
|
instance_num[1][i] = ~special_chars[1][i];
|
|
}
|
|
else
|
|
{
|
|
if (configuration.dexed[!instance_id].polyphony == 0)
|
|
{
|
|
instance_num[0][i] = bit_reverse8(special_chars[0][i]);
|
|
instance_num[0][i] = ~instance_num[0][i];
|
|
}
|
|
else
|
|
instance_num[0][i] = ~special_chars[0][i];
|
|
|
|
if (configuration.dexed[instance_id].polyphony == 0)
|
|
instance_num[1][i] = bit_reverse8(special_chars[1][i]);
|
|
else
|
|
instance_num[1][i] = special_chars[1][i];
|
|
}
|
|
}
|
|
|
|
#if NUM_DEXED == 1
|
|
lcd.createChar(0, instance_num[0]);
|
|
lcd.createChar(1, (uint8_t*)special_chars[17]);
|
|
#else
|
|
lcd.createChar(0, instance_num[0]);
|
|
lcd.createChar(1, instance_num[1]);
|
|
#endif
|
|
}
|
|
|
|
void lcd_OP_active_instance_number(uint8_t instance_id, uint8_t op)
|
|
{
|
|
uint8_t i, n;
|
|
|
|
for (n = 2; n < 8; n++)
|
|
{
|
|
for (i = 0; i < 8; i++)
|
|
{
|
|
if (bitRead(op, n - 2))
|
|
instance_num[n][i] = special_chars[n][i];
|
|
else
|
|
instance_num[n][i] = ~special_chars[n][i];
|
|
}
|
|
lcd.createChar(n, instance_num[n]);
|
|
}
|
|
|
|
for (i = 0; i < 8; i++)
|
|
{
|
|
if (instance_id == 0)
|
|
{
|
|
if (configuration.dexed[instance_id].polyphony == 0)
|
|
instance_num[0][i] = bit_reverse8(special_chars[0][i]);
|
|
else
|
|
instance_num[0][i] = special_chars[0][i];
|
|
|
|
if (configuration.dexed[!instance_id].polyphony == 0)
|
|
{
|
|
instance_num[1][i] = bit_reverse8(special_chars[1][i]);
|
|
instance_num[1][i] = ~instance_num[1][i];
|
|
}
|
|
else
|
|
instance_num[1][i] = ~special_chars[1][i];
|
|
}
|
|
else
|
|
{
|
|
if (configuration.dexed[!instance_id].polyphony == 0)
|
|
{
|
|
instance_num[0][i] = bit_reverse8(special_chars[0][i]);
|
|
instance_num[0][i] = ~instance_num[0][i];
|
|
}
|
|
else
|
|
instance_num[0][i] = ~special_chars[0][i];
|
|
|
|
if (configuration.dexed[instance_id].polyphony == 0)
|
|
instance_num[1][i] = bit_reverse8(special_chars[1][i]);
|
|
else
|
|
instance_num[1][i] = special_chars[1][i];
|
|
}
|
|
}
|
|
|
|
lcd.createChar(0, instance_num[0]);
|
|
lcd.createChar(1, instance_num[1]);
|
|
}
|
|
|
|
void lcd_special_chars(uint8_t mode)
|
|
{
|
|
switch (mode)
|
|
{
|
|
case SCROLLBAR:
|
|
// set special chars for scrollbar
|
|
for (uint8_t i = 0; i < 5; i++)
|
|
{
|
|
#ifdef I2C_DISPLAY
|
|
lcd.createChar(i, (uint8_t*)scroll_bar[i]);
|
|
#else
|
|
flipped_scroll_bar[i] = rotTile(scroll_bar[i]);
|
|
#endif
|
|
}
|
|
break;
|
|
case BLOCKBAR:
|
|
// set special chars for volume-bar
|
|
for (uint8_t i = 0; i < 7; i++)
|
|
{
|
|
#ifdef I2C_DISPLAY
|
|
lcd.createChar(i + 2, (uint8_t*)block_bar[i]);
|
|
#else
|
|
flipped_block_bar[i] = rotTile(block_bar[i]);
|
|
#endif
|
|
}
|
|
break;
|
|
case METERBAR:
|
|
// set special chars for panorama-bar
|
|
for (uint8_t i = 0; i < 7; i++)
|
|
{
|
|
#ifdef I2C_DISPLAY
|
|
lcd.createChar(i + 2, (uint8_t*)meter_bar[i]);
|
|
#else
|
|
flipped_meter_bar[i] = rotTile(meter_bar[i]);
|
|
#endif
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
void eeprom_update_var(uint16_t pos, uint8_t val, const char* val_string)
|
|
{
|
|
#ifdef DEBUG
|
|
char tmp[80];
|
|
sprintf(tmp, "EEPROM update '%s' at position %d with value %d.", val_string, pos, val);
|
|
Serial.println(tmp);
|
|
#endif
|
|
EEPROM.update(EEPROM_START_ADDRESS + pos, val);
|
|
}
|
|
|
|
#endif
|
|
#endif
|
|
|