You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
MicroDexed/config.h

335 lines
9.7 KiB

/*
MicroDexed
MicroDexed is a port of the Dexed sound engine
(https://github.com/asb2m10/dexed) for the Teensy-3.5/3.6 with audio shield.
Dexed ist heavily based on https://github.com/google/music-synthesizer-for-android
(c)2018,2019 H. Wirtz <wirtz@parasitstudio.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef CONFIG_H_INCLUDED
#define CONFIG_H_INCLUDED
#include "midinotes.h"
// ATTENTION! For better latency you have to redefine AUDIO_BLOCK_SAMPLES from
// 128 to 64 in <ARDUINO-IDE-DIR>/cores/teensy3/AudioStream.h
// If you want to test the system with Linux and withous any keyboard and/or audio equipment, you can do the following:
// 1. In Arduino-IDE enable "Tools->USB-Type->Serial + MIDI + Audio"
// 2. Build the firmware with "MIDI_DEVICE_USB" enabled in config.h.
// 3. Afterconnecting to a Linux system there should be a MIDI an audio device available that is called "MicroMDAEPiano", so you can start the following:
// $ aplaymidi -p 20:0 <MIDI-File> # e.g. test.mid
// $ arecord -f cd -Dhw:1,0 /tmp/bla.wav
#define VERSION "0.9.7"
//*************************************************************************************************
//* DEVICE SETTINGS
//*************************************************************************************************
// MIDI
//#define MIDI_DEVICE_DIN Serial1
#define MIDI_DEVICE_USB 1
#define MIDI_DEVICE_USB_HOST 1
#define MIDI_DEVICE_NUMBER 0
// AUDIO
// If nothing is defined Teensy internal DAC is used as audio output device!
// Left and right channel audio signal is presented on pins A21 and A22.
//#define TEENSY_DAC
//#define TEENSY_DAC_SYMMETRIC
//#define TEENSY_AUDIO_BOARD
//#define TGA_AUDIO_BOARD
#define PT8211_AUDIO
//*************************************************************************************************
//* MIDI SETTINGS
//*************************************************************************************************
#define DEFAULT_MIDI_CHANNEL MIDI_CHANNEL_OMNI
#define MIDI_MERGE_THRU 1
#define SYSEXBANK_DEFAULT 0
#define SYSEXSOUND_DEFAULT 0
//*************************************************************************************************
//* DEXED AND EFECTS SETTINGS
//*************************************************************************************************
#define DEXED_ENGINE DEXED_ENGINE_MODERN // DEXED_ENGINE_MARKI // DEXED_ENGINE_OPL
// CHORUS parameters
#define MOD_DELAY_SAMPLE_BUFFER int32_t(TIME_MS2SAMPLES(20.0)) // 20.0 ms delay buffer.
#define MOD_WAVEFORM WAVEFORM_TRIANGLE // WAVEFORM_SINE WAVEFORM_TRIANGLE WAVEFORM_SAWTOOTH WAVEFORM_SAWTOOTH_REVERSE
#define MOD_FILTER_OUTPUT MOD_LINKWITZ_RILEY_FILTER_OUTPUT // MOD_LINKWITZ_RILEY_FILTER_OUTPUT MOD_BUTTERWORTH_FILTER_OUTPUT MOD_NO_FILTER_OUTPUT
#define MOD_FILTER_CUTOFF_HZ 3000
#define USE_REVERB 1
//*************************************************************************************************
//* AUDIO SETTINGS
//*************************************************************************************************
// https://rechneronline.de/funktionsgraphen/
#define VOLUME_CURVE 0.07
#ifndef TEENSY_AUDIO_BOARD
#if AUDIO_BLOCK_SAMPLES == 64
#define AUDIO_MEM 450
#else
#define AUDIO_MEM 225
#endif
#define DELAY_MAX_TIME 600
#define REDUCE_LOUDNESS 1
#else
#if AUDIO_BLOCK_SAMPLES == 64
#define AUDIO_MEM 900
#else
#define AUDIO_MEM 450
#endif
#define DELAY_MAX_TIME 1200
#define REDUCE_LOUDNESS 1
#endif
#define SAMPLE_RATE 44100
#define SOFTEN_VALUE_CHANGE_STEPS 5
//*************************************************************************************************
//* UI
//*************************************************************************************************
#define ENABLE_LCD_UI 1
#define LCD_I2C_ADDRESS 0x27
#define LCD_cols 16
#define LCD_rows 2
#define CONTROL_RATE_MS 50
#define BACK_FROM_VOLUME_MS 1000
//*************************************************************************************************
//* DEBUG OUTPUT SETTINGS
//*************************************************************************************************
#define DEBUG 1
#define SERIAL_SPEED 38400
#define SHOW_XRUN 1
#define SHOW_CPU_LOAD_MSEC 5000
//*************************************************************************************************
//* HARDWARE SETTINGS
//*************************************************************************************************
// Teensy Audio Shield:
//#define SDCARD_CS_PIN 10
//#define SDCARD_MOSI_PIN 7
//#define SDCARD_SCK_PIN 14
#define SGTL5000_LINEOUT_LEVEL 29
// Teensy 3.5 & 3.6 SD card
#define SDCARD_CS_PIN BUILTIN_SDCARD
#define SDCARD_MOSI_PIN 11 // not actually used
#define SDCARD_SCK_PIN 13 // not actually used
// Encoder with button
#define ENCODER_USE_INTERRUPTS
#define NUM_ENCODER 2
#define ENC_L_PIN_A 3
#define ENC_L_PIN_B 2
#define BUT_L_PIN 4
#define ENC_R_PIN_A 28
#define ENC_R_PIN_B 29
#define BUT_R_PIN 30
#define BUT_DEBOUNCE_MS 20
#define LONG_BUTTON_PRESS 500
// LCD Display
#define I2C_DISPLAY 1
// [I2C] SCL: Pin 19, SDA: Pin 18 (https://www.pjrc.com/teensy/td_libs_Wire.html)
//#define LCD_GFX 1
#define LCD_I2C_ADDRESS 0x27
#define LCD_CHARS 16
#define LCD_LINES 2
// Internal timer
#define AUTOSTORE_MS 5000
#define VOICE_SELECTION_MS 2000
// EEPROM address
#define EEPROM_START_ADDRESS 0
#define MAX_BANKS 100
#define MAX_VOICES 32 // voices per bank
#define BANK_NAME_LEN 13 // FAT12 filenames (plus '\0')
#define VOICE_NAME_LEN 11 // 10 (plus '\0')
//*************************************************************************************************
//* DO NO CHANGE ANYTHING BEYOND IF YOU DON'T KNOW WHAT YOU ARE DOING !!!
//*************************************************************************************************
#define NUM_DEXED 1
// MIDI
#ifdef MIDI_DEVICE_USB
#define USBCON 1
#endif
#if defined(__MK66FX1M0__) // Teensy-3.6
// Teensy-3.6 settings
#define MIDI_DEVICE_USB_HOST 1
#if defined(USE_REVERB)
#define MAX_NOTES 14
#else
#define MAX_NOTES 16
#endif
#else
// Teensy-3.5 settings
#undef MIDI_DEVICE_USB_HOST
#define MAX_NOTES 11
#undef USE_REVERB
#endif
#define TRANSPOSE_FIX 24
// Audio
#ifdef TGA_AUDIO_BOARD
#define REDUCE_LOUDNESS 2
#endif
// Some optimizations
#define USE_TEENSY_DSP 1
#define SUM_UP_AS_INT 1
/* HELPER MACROS */
#define TIME_MS2SAMPLES(x) floor(uint32_t(x) * AUDIO_SAMPLE_RATE / 1000)
#define SAMPLES2TIME_MS(x) float(uint32_t(x) * 1000 / AUDIO_SAMPLE_RATE)
// Modulated delay options
#define MOD_NO_FILTER_OUTPUT 0
#define MOD_BUTTERWORTH_FILTER_OUTPUT 1
#define MOD_LINKWITZ_RILEY_FILTER_OUTPUT 2
#if defined(TEENSY_DAC_SYMMETRIC)
#define MONO_MIN 1
#define MONO_MAX 1
#define MONO_DEFAULT 1
#else
#define MONO_MIN 0
#define MONO_MAX 3
#define MONO_DEFAULT 1
#endif
#define VOLUME_MIN 0
#define VOLUME_MAX 100
#define VOLUME_DEFAULT 80
#define VOLUME_ENC_STEPS 20
#define PANORAMA_MIN -20
#define PANORAMA_MAX 20
#define PANORAMA_DEFAULT 0
#define MIDI_CHANNEL_MIN MIDI_CHANNEL_OMNI
#define MIDI_CHANNEL_MAX 16
#define MIDI_CHANNEL_DEFAULT MIDI_CHANNEL_OMNI
#define REVERB_ROOMSIZE_MIN 0
#define REVERB_ROOMSIZE_MAX 100
#define REVERB_ROOMSIZE_DEFAULT 0
#define REVERB_DAMPING_MIN 0
#define REVERB_DAMPING_MAX 100
#define REVERB_DAMPING_DEFAULT 0
#define REVERB_LEVEL_MIN 0
#define REVERB_LEVEL_MAX 100
#define REVERB_LEVEL_DEFAULT 0
#define CHORUS_FREQUENCY_MIN 0
#define CHORUS_FREQUENCY_MAX 100
#define CHORUS_FREQUENCY_DEFAULT 0
#define CHORUS_WAVEFORM_MIN 0
#define CHORUS_WAVEFORM_MAX 1
#define CHORUS_WAVEFORM_DEFAULT 0
#define CHORUS_DEPTH_MIN 0
#define CHORUS_DEPTH_MAX 100
#define CHORUS_DEPTH_DEFAULT 0
#define CHORUS_LEVEL_MIN 0
#define CHORUS_LEVEL_MAX 100
#define CHORUS_LEVEL_DEFAULT 0
#define DELAY_TIME_MIN 0
#define DELAY_TIME_MAX DELAY_MAX_TIME/10
#define DELAY_TIME_DEFAULT 0
#define DELAY_FEEDBACK_MIN 0
#define DELAY_FEEDBACK_MAX 100
#define DELAY_FEEDBACK_DEFAULT 0
#define DELAY_LEVEL_MIN 0
#define DELAY_LEVEL_MAX 100
#define DELAY_LEVEL_DEFAULT 0
#define FILTER_CUTOFF_MIN 0
#define FILTER_CUTOFF_MAX 100
#define FILTER_CUTOFF_DEFAULT 0
#define FILTER_RESONANCE_MIN 0
#define FILTER_RESONANCE_MAX 100
#define FILTER_RESONANCE_DEFAULT 0
#define LOUDNESS_MIN 0
#define LOUDNESS_MAX 100
#define LOUDNESS_DEFAULT 100
#define POLYPHONY_MIN 1
#define POLYPHONY_MAX MAX_NOTES
#define POLYPHONY_DEFAULT MAX_NOTES
#define ENGINE_MIN 0
#define ENGINE_MAX 2
#define ENGINE_DEFAULT 0
// struct for holding the current configuration
struct config_t {
uint32_t checksum;
uint8_t bank;
uint8_t voice;
uint8_t vol;
int8_t pan;
uint8_t mono;
uint8_t midi_channel;
uint8_t reverb_roomsize;
uint8_t reverb_damping;
uint8_t reverb_level;
uint8_t chorus_frequency;
uint8_t chorus_waveform;
uint8_t chorus_depth;
uint8_t chorus_level;
uint8_t delay_time;
uint8_t delay_feedback;
uint8_t delay_level;
uint8_t filter_cutoff;
uint8_t filter_resonance;
uint8_t loudness;
uint8_t polyphony;
uint8_t engine;
};
// struct for smoothing value changes
struct value_change_t {
float diff;
uint16_t steps;
};
inline float mapfloat(float val, float in_min, float in_max, float out_min, float out_max)
{
return (val - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
}
#endif // CONFIG_H_INCLUDED