/* MicroDexed MicroDexed is a port of the Dexed sound engine (https://github.com/asb2m10/dexed) for the Teensy-3.5/3.6 with audio shield (c)2018 H. Wirtz This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #include "midinotes.h" // Initial values #define MIDI_DEVICE Serial1 #define VOLUME 0.1 #define SAMPLE_RATE 44100 //#define DEXED_ENGINE DEXED_ENGINE_MODERN //#define USE_ONBOARD_USB_HOST 1 #if !defined(__MK66FX1M0__) // check for Teensy-3.6 #define MAX_NOTES 11 // No? #else #define MAX_NOTES 16 // Yes #endif #define AUDIO_MEM 2 #define DEFAULT_MIDI_CHANNEL MIDI_CHANNEL_OMNI #define DEFAULT_SYSEXBANK 0 #define DEFAULT_SYSEXSOUND 0 // Master key handling (comment for disabling) #define MASTER_KEY_MIDI MIDI_C6 #define MASTER_NUM1 MIDI_C1 // Debug output #define SERIAL_SPEED 38400 //#define SHOW_DEXED_TIMING 1 #define DEBUG 1 #define SHOW_MIDI_EVENT 1 #define SHOW_XRUN 1 #define SHOW_CPU_LOAD_MSEC 5000 // Some optimizations in the code #define USE_TEENSY_DSP 1 #define SUM_UP_AS_INT 1 #define REDUCE_LOUDNESS 2 // Enable TEST_NOTE for adding code to drop some midi notes for testing without keyboard //#define TEST_NOTE MIDI_E2 #define TEST_VEL_MIN 60 #define TEST_VEL_MAX 110 // Use these with the Teensy Audio Shield #define SDCARD_CS_PIN 10 #define SDCARD_MOSI_PIN 7 #define SDCARD_SCK_PIN 14 // Use these with the Teensy 3.5 & 3.6 SD card //#define SDCARD_CS_PIN BUILTIN_SDCARD //#define SDCARD_MOSI_PIN 11 // not actually used //#define SDCARD_SCK_PIN 13 // not actually used // EEPROM address #define EEPROM_VOICE_ADDR 0 #define EEPROM_BANK_ADDR 0