/* MicroDexed MicroDexed is a port of the Dexed sound engine (https://github.com/asb2m10/dexed) for the Teensy-3.5/3.6 with audio shield. Dexed ist heavily based on https://github.com/google/music-synthesizer-for-android (c)2018 H. Wirtz This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #include "midinotes.h" // ATTENTION! For better latency you have to redefine AUDIO_BLOCK_SAMPLES from // 128 to 64 in /cores/teensy3/AudioStream.h #ifndef CONFIG_H_INCLUDED #define CONFIG_H_INCLUDED // Initial values #define VERSION 1.0.0 #define MIDI_DEVICE Serial1 #define USE_ONBOARD_USB_HOST 1 #define TEENSY_AUDIO_BOARD 1 #define VOLUME 0.6 #define DEFAULT_MIDI_CHANNEL MIDI_CHANNEL_OMNI #define DEFAULT_SYSEXBANK 0 #define DEFAULT_SYSEXSOUND 0 //#define DEXED_ENGINE DEXED_ENGINE_MODERN #ifndef TEENSY_AUDIO_BOARD #define AUDIO_MEM 80 #else #define AUDIO_MEM 128 #endif #define SAMPLE_RATE 44100 #define MAX_BANKS 100 #define MAX_VOICES 32 // voices per bank #define BANK_NAME_LEN 13 // FAT12 filenames (plus '\0') #define VOICE_NAME_LEN 11 // 10 (plus '\0') #if !defined(__MK66FX1M0__) // check for Teensy-3.6 #define MAX_NOTES 11 // No? #undef USE_ONBOARD_USB_HOST #else #define MAX_NOTES 16 // Yes #endif // EFFECTS #define FILTER_MAX_FREQ 1000 #define DELAY_MAX_TIME 1200 // Master key handling (comment for disabling) //#define MASTER_KEY_MIDI MIDI_C7 #define MASTER_NUM1 MIDI_C2 // Debug output #define SERIAL_SPEED 38400 #define DEBUG 1 #define SHOW_MIDI_EVENT 1 #define SHOW_XRUN 1 #define SHOW_CPU_LOAD_MSEC 5000 // Some optimizations #define USE_TEENSY_DSP 1 #define SUM_UP_AS_INT 1 #define REDUCE_LOUDNESS 1 // Enable TEST_NOTE for adding code to drop some midi notes for testing without keyboard //#define TEST_NOTE MIDI_E2 #define TEST_VEL_MIN 60 #define TEST_VEL_MAX 110 // Use these with the Teensy Audio Shield //#define SDCARD_CS_PIN 10 //#define SDCARD_MOSI_PIN 7 //#define SDCARD_SCK_PIN 14 // Use these with the Teensy 3.5 & 3.6 SD card #define SDCARD_CS_PIN BUILTIN_SDCARD #define SDCARD_MOSI_PIN 11 // not actually used #define SDCARD_SCK_PIN 13 // not actually used // LCD Display #define I2C_DISPLAY 1 // [I2C] SCL: Pin 19, SDA: Pin 18 (https://www.pjrc.com/teensy/td_libs_Wire.html) #define LCD_I2C_ADDRESS 0x27 #define LCD_CHARS 16 #define LCD_LINES 2 #define UI_AUTO_BACK_MS 3000 #define AUTOSTORE_MS 5000 #define AUTOSTORE_FAST_MS 50 // Encoder with button #define ENC_VOL_STEPS 43 #define ENC_FILTER_FRQ_STEPS 50 #define ENC_FILTER_RES_STEPS 35 #define ENC_FILTER_OCT_STEPS 27 #define ENC_DELAY_TIME_STEPS 50 #define ENC_DELAY_FB_STEPS 35 #define TIMER_UI_HANDLING_MS 100 #define NUM_ENCODER 2 #define ENC_L_PIN_A 3 #define ENC_L_PIN_B 2 #define BUT_L_PIN 4 #define INITIAL_ENC_L_VALUE 0 #define ENC_R_PIN_A 28 #define ENC_R_PIN_B 29 #define BUT_R_PIN 30 #define INITIAL_ENC_R_VALUE 0 #define BUT_DEBOUNCE_MS 20 #define LONG_BUTTON_PRESS 500 // EEPROM address #define EEPROM_OFFSET 0 #define EEPROM_DATA_LENGTH 6 #define EEPROM_CRC32_ADDR EEPROM.length()-sizeof(uint32_t) #define EEPROM_BANK_ADDR 0 #define EEPROM_VOICE_ADDR 1 #define EEPROM_MASTER_VOLUME_ADDR 2 #define EEPROM_VOLUME_RIGHT_ADDR 3 #define EEPROM_VOLUME_LEFT_ADDR 4 #define EEPROM_MIDICHANNEL_ADDR 5 #define EEPROM_UPDATE_BANK (1<<0) #define EEPROM_UPDATE_VOICE (1<<1) #define EEPROM_UPDATE_VOL (1<<2) #define EEPROM_UPDATE_VOL_R (1<<3) #define EEPROM_UPDATE_VOL_L (1<<4) #define EEPROM_UPDATE_MIDICHANNEL (1<<5) #define EEPROM_UPDATE_CHECKSUM (1<<7) #endif