// Test of time-stamp callback with Teensy3.
// The upload time will be used to set the RTC.
// You must arrange for syncing the RTC.
#include "SdFs.h"
#include <TimeLib.h>

// SD_FAT_TYPE = 1 for FAT16/FAT32, 2 for exFAT, 3 for FAT16/FAT32 and exFAT.
#define SD_FAT_TYPE 3
/*
  Change the value of SD_CS_PIN if you are using SPI and
  your hardware does not use the default value, SS.  
  Common values are:
  Arduino Ethernet shield: pin 4
  Sparkfun SD shield: pin 8
  Adafruit SD shields and modules: pin 10
*/

// SDCARD_SS_PIN is defined for the built-in SD on some boards.
#ifndef SDCARD_SS_PIN
const uint8_t SD_CS_PIN = SS;
#else  // SDCARD_SS_PIN
// Assume built-in SD is used.
const uint8_t SD_CS_PIN = SDCARD_SS_PIN;
#endif  // SDCARD_SS_PIN

// Try to select the best SD card configuration.
#if HAS_SDIO_CLASS
#define SD_CONFIG SdioConfig(FIFO_SDIO)
#elif ENABLE_DEDICATED_SPI
#define SD_CONFIG SdSpiConfig(SD_CS_PIN, DEDICATED_SPI)
#else  // HAS_SDIO_CLASS
#define SD_CONFIG SdSpiConfig(SD_CS_PIN, SHARED_SPI)
#endif  // HAS_SDIO_CLASS

#if SD_FAT_TYPE == 1
SdFat sd;
File file;
#elif SD_FAT_TYPE == 2
SdExFat sd;
ExFile file;
#elif SD_FAT_TYPE == 3
SdFs sd;
FsFile file;
#else  // SD_FAT_TYPE
#error Invalid SD_FAT_TYPE
#endif  // SD_FAT_TYPE

//------------------------------------------------------------------------------
// Call back for file timestamps.  Only called for file create and sync().
void dateTime(uint16_t* date, uint16_t* time) {
  // Return date using FS_DATE macro to format fields.
  *date = FS_DATE(year(), month(), day());

  // Return time using FS_TIME macro to format fields.
  *time = FS_TIME(hour(), minute(), second());
}
//------------------------------------------------------------------------------
time_t getTeensy3Time()
{
  return Teensy3Clock.get();
}
//------------------------------------------------------------------------------
void printField(Print* pr, char sep, uint8_t v) {
  if (sep) {
    pr->write(sep);
  }  
  if (v < 10) {
    pr->write('0');
  }
  pr->print(v);
}
//------------------------------------------------------------------------------  
void printNow(Print* pr) {
  pr->print(year());
  printField(pr, '-', month());
  printField(pr, '-', day());  
  printField(pr, ' ', hour());
  printField(pr, ':', minute());
  printField(pr, ':', second());
}
//------------------------------------------------------------------------------
void setup() {
  // set the Time library to use Teensy 3.0's RTC to keep time
  setSyncProvider(getTeensy3Time);
  
  Serial.begin(9600);
  while (!Serial) {
    yield();
  }
  Serial.println(F("Type any character to begin"));
  while (!Serial.available()) {
    yield();
  }
  if (timeStatus()!= timeSet) {
    Serial.println("Unable to sync with the RTC");
    return;
  }
  Serial.print(F("DateTime::now "));
  printNow(&Serial);
  Serial.println();

  // Set callback
  FsDateTime::callback = dateTime;
  
  if (!sd.begin(SD_CONFIG)) {
    sd.initErrorHalt(&Serial);
  }
  // Remove old version to set create time.
  if (sd.exists("RtcTest.txt")) {
    sd.remove("RtcTest.txt");
  }
  if (!file.open("RtcTest.txt", FILE_WRITE)) {
    Serial.println(F("file.open failed"));
    return;
  }
  // Print current date time to file.
  file.print(F("Test file at: "));
  printNow(&file);
  file.println();
  
  file.close();
  // List files in SD root.
  sd.ls(LS_DATE | LS_SIZE);
  Serial.println(F("Done"));
}
//------------------------------------------------------------------------------
void loop() {
}