/* MicroDexed MicroDexed is a port of the Dexed sound engine (https://github.com/asb2m10/dexed) for the Teensy-3.5/3.6 with audio shield (c)2018 H. Wirtz This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include "dexed.h" #include "dexed_sysex.h" #include "config.h" #ifdef USE_ONBOARD_USB_HOST #include #endif // GUItool: begin automatically generated code AudioPlayQueue queue1; //xy=84,294 AudioOutputI2S i2s1; //xy=961,276 AudioConnection patchCord2(queue1, 0, i2s1, 0); AudioConnection patchCord3(queue1, 0, i2s1, 1); AudioControlSGTL5000 sgtl5000_1; //xy=507,403 // GUItool: end automatically generated code MIDI_CREATE_INSTANCE(HardwareSerial, Serial1, MIDI); Dexed* dexed = new Dexed(SAMPLE_RATE); IntervalTimer sched; #ifdef USE_ONBOARD_USB_HOST USBHost usb_host; MIDIDevice midi_usb(usb_host); #endif bool sd_card_available = false; bool master_key_enabled = false; #ifdef TEST_MIDI IntervalTimer sched_note_on; IntervalTimer sched_note_off; uint8_t _voice_counter = 0; #endif void setup() { //while (!Serial) ; // wait for Arduino Serial Monitor Serial.begin(SERIAL_SPEED); delay(200); Serial.println(F("MicroDexed based on https://github.com/asb2m10/dexed")); Serial.println(F("(c)2018 H. Wirtz")); Serial.println(F("setup start")); // strat up USB host #ifdef USE_ONBOARD_USB_HOST usb_host.begin(); #endif SPI.setMOSI(SDCARD_MOSI_PIN); SPI.setSCK(SDCARD_SCK_PIN); if (!SD.begin(SDCARD_CS_PIN)) { Serial.println(F("SD card not accessable")); } else { Serial.println(F("SD card found.")); sd_card_available = true; } MIDI.begin(MIDI_CHANNEL_OMNI); // Audio connections require memory to work. For more // detailed information, see the MemoryAndCpuUsage example AudioMemory(AUDIO_MEM); sgtl5000_1.enable(); sgtl5000_1.volume(VOLUME); #ifdef SHOW_CPU_LOAD_MSEC // Initialize processor and memory measurements AudioProcessorUsageMaxReset(); AudioMemoryUsageMaxReset(); #endif //dexed->activate(); //dexed->setMaxNotes(MAX_NOTES); //dexed->setEngineType(DEXED_ENGINE); sched.begin(cleanup, SHOW_CPU_LOAD_MSEC * 1000); Serial.print(F("AUDIO_BLOCK_SAMPLES=")); Serial.println(AUDIO_BLOCK_SAMPLES); #ifdef TEST_MIDI Serial.println(F("MIDI test enabled")); sched_note_on.begin(note_on, 2000000); sched_note_off.begin(note_off, 6333333); #endif Serial.println(F("setup end")); cpu_and_mem_usage(); #ifdef TEST_MIDI //dexed->data[DEXED_VOICE_OFFSET+DEXED_LFO_PITCH_MOD_DEP] = 99; // full pitch mod depth //dexed->data[DEXED_VOICE_OFFSET+DEXED_LFO_PITCH_MOD_SENS] = 99; // full pitch mod sense //dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET+DEXED_MODWHEEL_ASSIGN] = 7; // mod wheel assign all //dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET+DEXED_FOOTCTRL_ASSIGN] = 7; // foot ctrl assign all //dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET+DEXED_BREATHCTRL_ASSIGN] = 7; // breath ctrl assign all //dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET+AT_ASSIGN] = 7; // at ctrl assign all //queue_midi_event(0xb0, 1, 99); // test mod wheel //queue_midi_event(0xb0, 2, 99); // test breath ctrl //queue_midi_event(0xb0, 4, 99); // test food switch //queue_midi_event(0xd0, 4, 99); // test at //queue_midi_event(0xe0, 0xff, 0xff); // test pitch bend #endif } void loop() { int16_t* audio_buffer; // pointer to 128 * int16_t (=256 bytes!) bool break_for_calculation = false; while (42 == 42) // DON'T PANIC! { #ifdef USE_ONBOARD_USB_HOST usb_host.Task(); #endif audio_buffer = queue1.getBuffer(); if (audio_buffer == NULL) { Serial.println(F("E: audio_buffer allocation problems!")); } #ifdef USE_ONBOARD_USB_HOST while (midi_usb.read()) { break_for_calculation = queue_midi_event(midi_usb.getType(), midi_usb.getData1(), midi_usb.getData2()); if (break_for_calculation == true) break; } if (!break_for_calculation) { #endif while (MIDI.read()) { if (MIDI.getType() == 0xF0) // SysEX { handle_sysex_parameter(MIDI.getSysExArray(), MIDI.getSysExArrayLength()); } else { break_for_calculation = queue_midi_event(MIDI.getType(), MIDI.getData1(), MIDI.getData2()); if (break_for_calculation == true) break; } } #ifdef USE_ONBOARD_USB_HOST } #endif if (!queue1.available()) continue; #if defined(SHOW_DEXED_TIMING) || defined(SHOW_XRUN) elapsedMicros t1; #endif dexed->getSamples(AUDIO_BLOCK_SAMPLES, audio_buffer); #ifdef SHOW_XRUN uint32_t t2 = t1; if (t2 > 2900) // everything greater 2.9ms is a buffer underrun! Serial.println(F("XRUN")); #endif #ifdef SHOW_DEXED_TIMING Serial.println(t1, DEC); #endif queue1.playBuffer(); } } #ifdef TEST_MIDI void note_on(void) { randomSeed(analogRead(A0)); queue_midi_event(0x90, TEST_NOTE, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 1 queue_midi_event(0x90, TEST_NOTE + 5, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 2 queue_midi_event(0x90, TEST_NOTE + 8, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 3 queue_midi_event(0x90, TEST_NOTE + 12, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 4 queue_midi_event(0x90, TEST_NOTE + 17, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 5 queue_midi_event(0x90, TEST_NOTE + 20, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 6 queue_midi_event(0x90, TEST_NOTE + 24, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 7 queue_midi_event(0x90, TEST_NOTE + 29, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 8 queue_midi_event(0x90, TEST_NOTE + 32, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 9 queue_midi_event(0x90, TEST_NOTE + 37, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 10 queue_midi_event(0x90, TEST_NOTE + 40, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 11 queue_midi_event(0x90, TEST_NOTE + 44, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 12 queue_midi_event(0x90, TEST_NOTE + 49, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 13 queue_midi_event(0x90, TEST_NOTE + 52, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 14 queue_midi_event(0x90, TEST_NOTE + 57, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 15 queue_midi_event(0x90, TEST_NOTE + 60, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 16 } void note_off(void) { queue_midi_event(0x80, TEST_NOTE, 0); // 1 queue_midi_event(0x80, TEST_NOTE + 5, 0); // 2 queue_midi_event(0x80, TEST_NOTE + 8, 0); // 3 queue_midi_event(0x80, TEST_NOTE + 12, 0); // 4 queue_midi_event(0x80, TEST_NOTE + 17, 0); // 5 queue_midi_event(0x80, TEST_NOTE + 20, 0); // 6 queue_midi_event(0x80, TEST_NOTE + 24, 0); // 7 queue_midi_event(0x80, TEST_NOTE + 29, 0); // 8 queue_midi_event(0x80, TEST_NOTE + 32, 0); // 9 queue_midi_event(0x80, TEST_NOTE + 37, 0); // 10 queue_midi_event(0x80, TEST_NOTE + 40, 0); // 11 queue_midi_event(0x80, TEST_NOTE + 44, 0); // 12 queue_midi_event(0x80, TEST_NOTE + 49, 0); // 13 queue_midi_event(0x80, TEST_NOTE + 52, 0); // 14 queue_midi_event(0x80, TEST_NOTE + 57, 0); // 15 queue_midi_event(0x80, TEST_NOTE + 60, 0); // 16 //bool success=true; //bool success = load_sysex("ROM1A.SYX", (++_voice_counter)-1); //bool success=load_sysex("ROM1B.SYX", (++_voice_counter)-1); //bool success=load_sysex("RITCH01-32.SYX", (++_voice_counter)-1); //bool success=load_sysex("RITCH33-64.SYX", (++_voice_counter)-1); bool success = load_sysex("RITCH0~1.SYX", (++_voice_counter) - 1); if (success == false) Serial.println(F("E: Cannot load SYSEX data")); else show_patch(); } #endif bool queue_midi_event(uint8_t type, uint8_t data1, uint8_t data2) { if (master_key_enabled == true) { if (data1 >= 24 && data1 <= 56) { if (!load_sysex("RITCH0~1.SYX", data1 - 24)) { Serial.print("E: cannot load voice number "); Serial.println(data1 - 24, DEC); } } master_key_enabled = false; Serial.println("Master key disabled"); } else { if (type == 0x80 && data1 == MASTER_KEY_MIDI) // ignore Master key up return (false); else if (type == 0x90 && data1 == MASTER_KEY_MIDI) // Master key pressed { master_key_enabled = true; Serial.println("Master key enabled"); } else return (dexed->processMidiMessage(type, data1, data2)); } return (false); } void handle_sysex_parameter(const uint8_t* sysex, uint8_t len) { // parse parameter change if (len == 7) { if (sysex[1] != 0x43) // check for Yamaha sysex { Serial.println("E: SysEx vendor not Yamaha."); return; } if ((sysex[3] & 0x7c) != 0) { Serial.println("E: Not a parameter change."); return; } if (sysex[6] != 0xf7) { Serial.println("E: SysEx end status byte not detected."); return; } dexed->data[sysex[4]] = sysex[5]; // set parameter Serial.print("SysEx parameter "); Serial.print(sysex[4], DEC); Serial.print("="); Serial.println(sysex[5], DEC); } else Serial.println("E: SysEx parameter length wrong."); } void cleanup(void) { if (master_key_enabled == true) { master_key_enabled = false; Serial.println("Auto disabling master key"); } #ifdef SHOW_CPU_LOAD_MSEC cpu_and_mem_usage(); #endif } #ifdef SHOW_CPU_LOAD_MSEC void cpu_and_mem_usage(void) { Serial.print(F("CPU:")); Serial.print(AudioProcessorUsage(), DEC); Serial.print(F(" CPU MAX:")); Serial.print(AudioProcessorUsageMax(), DEC); Serial.print(F(" MEM:")); Serial.print(AudioMemoryUsage(), DEC); Serial.print(F(" MEM MAX:")); Serial.print(AudioMemoryUsageMax(), DEC); Serial.println(); AudioProcessorUsageMaxReset(); AudioMemoryUsageMaxReset(); } #endif #ifdef DEBUG void show_patch(void) { uint8_t i; char voicename[11]; memset(voicename, 0, sizeof(voicename)); for (i = 0; i < 6; i++) { Serial.print(F("OP")); Serial.print(6 - i, DEC); Serial.println(F(":")); Serial.println(F("R1|R2|R3|R4|L1|L2|L3|L4 LEV_SCL_BRK_PT|SCL_LEFT_DEPTH|SCL_RGHT_DEPTH")); Serial.print(dexed->data[(i * 21) + DEXED_OP_EG_R1], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_EG_R2], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_EG_R3], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_EG_R4], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_EG_L1], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_EG_L2], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_EG_L3], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_EG_L4], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_LEV_SCL_BRK_PT], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_SCL_LEFT_DEPTH], DEC); Serial.print(F(" ")); Serial.println(dexed->data[(i * 21) + DEXED_OP_SCL_RGHT_DEPTH], DEC); Serial.println(F("SCL_L_CURVE|SCL_R_CURVE|RT_SCALE| AMS | KVS |OUT_LEV|OP_MOD|FRQ_C|FRQ_F|DETUNE")); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_SCL_LEFT_CURVE], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_SCL_RGHT_CURVE], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_OSC_RATE_SCALE], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_AMP_MOD_SENS], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_KEY_VEL_SENS], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_OUTPUT_LEV], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_OSC_MODE], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_FREQ_COARSE], DEC); Serial.print(F(" ")); Serial.print(dexed->data[(i * 21) + DEXED_OP_FREQ_FINE], DEC); Serial.print(F(" ")); Serial.println(dexed->data[(i * 21) + DEXED_OP_OSC_DETUNE], DEC); } Serial.println(F("PR1|PR2|PR3|PR4|PL1|PL2|PL3|PL4")); Serial.print(F(" ")); for (i = 0; i < 8; i++) { Serial.print(dexed->data[DEXED_VOICE_OFFSET + i], DEC); Serial.print(F(" ")); } Serial.println(); Serial.print(F("ALG: ")); Serial.println(dexed->data[DEXED_VOICE_OFFSET + DEXED_ALGORITHM], DEC); Serial.print(F("FB: ")); Serial.println(dexed->data[DEXED_VOICE_OFFSET + DEXED_FEEDBACK], DEC); Serial.print(F("OKS: ")); Serial.println(dexed->data[DEXED_VOICE_OFFSET + DEXED_OSC_KEY_SYNC], DEC); Serial.print(F("LFO SPD: ")); Serial.println(dexed->data[DEXED_VOICE_OFFSET + DEXED_LFO_SPEED], DEC); Serial.print(F("LFO_DLY: ")); Serial.println(dexed->data[DEXED_VOICE_OFFSET + DEXED_LFO_DELAY], DEC); Serial.print(F("LFO PMD: ")); Serial.println(dexed->data[DEXED_VOICE_OFFSET + DEXED_LFO_PITCH_MOD_DEP], DEC); Serial.print(F("LFO_AMD: ")); Serial.println(dexed->data[DEXED_VOICE_OFFSET + DEXED_LFO_AMP_MOD_DEP], DEC); Serial.print(F("LFO_SYNC: ")); Serial.println(dexed->data[DEXED_VOICE_OFFSET + DEXED_LFO_SYNC], DEC); Serial.print(F("LFO_WAVEFRM: ")); Serial.println(dexed->data[DEXED_VOICE_OFFSET + DEXED_LFO_WAVE], DEC); Serial.print(F("LFO_PMS: ")); Serial.println(dexed->data[DEXED_VOICE_OFFSET + DEXED_LFO_PITCH_MOD_SENS], DEC); Serial.print(F("TRNSPSE: ")); Serial.println(dexed->data[DEXED_VOICE_OFFSET + DEXED_TRANSPOSE], DEC); Serial.print(F("NAME: ")); strncpy(voicename, (char *)&dexed->data[DEXED_VOICE_OFFSET + DEXED_NAME], sizeof(voicename) - 1); Serial.print(F("[")); Serial.print(voicename); Serial.println(F("]")); for (i = DEXED_GLOBAL_PARAMETER_OFFSET; i <= DEXED_GLOBAL_PARAMETER_OFFSET + DEXED_MAX_NOTES; i++) { Serial.print(i, DEC); Serial.print(F(": ")); Serial.println(dexed->data[i]); } Serial.println(); } #endif