wirtz
/
MicroDexed
mirror of https://codeberg.org/dcoredump/MicroDexed.git
1
1
Fork 0
Code Issues Releases Wiki Activity

Fixing several errors while saving a performance.

Browse Source 
Fixing allover volume.
pull/111/head
Holger Wirtz 3 years ago
parent 54920843d2
commit cee32d9462
5 changed files with 128 additions and 53 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 20
      MicroDexed.ino
  2. 12
      UI.hpp
  3. 2
      config.h
  4. 145
      dexed_sd.cpp
  5. 2
      dexed_sd.h

20
MicroDexed.ino
Unescape View File

@ -418,7 +418,7 @@ void setup()
sgtl5000.enable();
sgtl5000.lineOutLevel(SGTL5000_LINEOUT_LEVEL);
sgtl5000.dacVolumeRamp();
sgtl5000.dacVolume(1.0);
//sgtl5000.dacVolume(1.0); // doing this at the end of setup()
//sgtl5000.dacVolumeRampLinear();
//sgtl5000.dacVolumeRampDisable();
sgtl5000.unmuteHeadphone();
@ -645,6 +645,10 @@ void setup()
strcpy(seq_name, "INIT Perf");
LCDML.OTHER_jumpToFunc(UI_func_voice_select);
#if defined(TEENSY_AUDIO_BOARD)
sgtl5000.dacVolume(1.0);
#endif
}
void loop()
@ -1873,8 +1877,8 @@ void set_volume(uint8_t v, uint8_t m)
Serial.println(volume_transform(tmp_v / 100.0));
#endif
volume_r.gain(volume_transform(tmp_v / 100.0));
volume_l.gain(volume_transform(tmp_v / 100.0));
volume_r.gain(volume_transform(tmp_v / 100.0)*VOLUME_MULTIPLIER);
volume_l.gain(volume_transform(tmp_v / 100.0)*VOLUME_MULTIPLIER);
switch (m)
{
@ -2576,6 +2580,16 @@ void check_and_create_directories(void)
}
}
sprintf(tmp, "/%s", PERFORMANCE_CONFIG_PATH);
if (!SD.exists(tmp))
{
#ifdef DEBUG
Serial.print(F("Creating directory "));
Serial.println(tmp);
#endif
SD.mkdir(tmp);
}
/*
// create directories for configuration files
sprintf(tmp, "/%s", VOICE_CONFIG_PATH);

12
UI.hpp
Unescape View File

@ -6220,7 +6220,7 @@ void UI_func_load_performance(uint8_t param)
mode = 0;
encoderDir[ENC_R].reset();
lcd.setCursor(0, 0);
lcd.print(F("Load Seq. state "));
lcd.print(F("Load Performance "));
lcd.setCursor(0, 1);
sprintf(tmp, "[%2d]", param);
lcd.print(tmp);
@ -6295,11 +6295,11 @@ void UI_func_save_performance(uint8_t param)
mode = 0;
encoderDir[ENC_R].reset();
lcd.setCursor(0, 0);
lcd.print(F("Save Seq. state:"));
lcd.print(F("Save Performance"));
lcd.setCursor(0, 1);
sprintf(tmp, "[%2d]", temp_int);
lcd.print(tmp);
sprintf(tmp, "/%s/%d-S.json", PERFORMANCE_CONFIG_PATH, temp_int);
sprintf(tmp, "/%s/%d/%s.json", PERFORMANCE_CONFIG_PATH, temp_int, PERFORMANCE_CONFIG_NAME);
if (SD.exists(tmp))
overwrite = true;
else
@ -6347,7 +6347,7 @@ void UI_func_save_performance(uint8_t param)
if (yesno == true)
{
char tmp[FILENAME_LEN];
sprintf(tmp, "/%s/%d-S.json", PERFORMANCE_CONFIG_PATH, temp_int);
sprintf(tmp, "/%s/%d/%s.json", PERFORMANCE_CONFIG_PATH, temp_int, PERFORMANCE_CONFIG_NAME);
SD.remove(tmp);
}
save_sd_performance_json(temp_int);
@ -6370,7 +6370,7 @@ void UI_func_save_performance(uint8_t param)
if (mode == 0)
{
char tmp[FILENAME_LEN];
sprintf(tmp, "/%s/%d-S.json", PERFORMANCE_CONFIG_PATH, temp_int);
sprintf(tmp, "/%s/%d/%s.json", PERFORMANCE_CONFIG_PATH, temp_int, PERFORMANCE_CONFIG_NAME);
if (SD.exists(tmp))
overwrite = true;
else
@ -6381,7 +6381,7 @@ void UI_func_save_performance(uint8_t param)
lcd.print(tmp);
lcd.setCursor(5, 1);
if (overwrite == false) {
lcd.print("-- empty --");
lcd.print("-- EMPTY --");
} else if (check_sd_performance_exists(temp_int))
{
get_sd_performance_name_json(temp_int);

2
config.h
Unescape View File

@ -676,6 +676,8 @@
#define FAVORITES_NUM_MAX 100
#define FAVORITES_NUM_DEFAULT 0
#define VOLUME_MULTIPLIER 1.3
// Buffer-size define for load/save configuration as JSON
#define JSON_BUFFER_SIZE 8192

145
dexed_sd.cpp
Unescape View File

@ -537,55 +537,69 @@ bool save_sd_drumsettings_json(uint8_t number)
File json;
StaticJsonDocument<JSON_BUFFER_SIZE> data_json;
sprintf(filename, "/%s/%d/%s.json", PERFORMANCE_CONFIG_PATH, number, DRUMS_CONFIG_NAME);
if (check_performance_directory(number))
{
sprintf(filename, "/%s/%d/%s.json", PERFORMANCE_CONFIG_PATH, number, DRUMS_CONFIG_NAME);
#ifdef DEBUG
Serial.print(F("Saving drums config "));
Serial.print(number);
Serial.print(F(" to "));
Serial.println(filename);
Serial.print(F("Saving drums config "));
Serial.print(number);
Serial.print(F(" to "));
Serial.println(filename);
#endif
AudioNoInterrupts();
if (SD.exists(filename)) {
Serial.println("remove old drumsettings file");
SD.begin();
SD.remove(filename);
}
json = SD.open(filename, FILE_WRITE);
if (json)
{
data_json["drums_volume"] = drums_volume;
for (uint8_t i = 0; i < NUM_DRUMSET_CONFIG - 1; i++)
AudioNoInterrupts();
if (SD.exists(filename)) {
Serial.println("remove old drumsettings file");
SD.begin();
SD.remove(filename);
}
json = SD.open(filename, FILE_WRITE);
if (json)
{
data_json["note"][i] = get_sample_note(i);
data_json["pitch"][i] = get_sample_pitch(i);
data_json["p_offset"][i] = get_sample_p_offset(i);
data_json["pan"][i] = get_sample_pan(i);
data_json["vol_max"][i] = get_sample_vol_max(i);
data_json["vol_min"][i] = get_sample_vol_min(i);
data_json["reverb_send"][i] = get_sample_reverb_send(i);
data_json["drums_volume"] = drums_volume;
for (uint8_t i = 0; i < NUM_DRUMSET_CONFIG - 1; i++)
{
data_json["note"][i] = get_sample_note(i);
data_json["pitch"][i] = get_sample_pitch(i);
data_json["p_offset"][i] = get_sample_p_offset(i);
data_json["pan"][i] = get_sample_pan(i);
data_json["vol_max"][i] = get_sample_vol_max(i);
data_json["vol_min"][i] = get_sample_vol_min(i);
data_json["reverb_send"][i] = get_sample_reverb_send(i);
}
#ifdef DEBUG
Serial.println(F("Write JSON data:"));
serializeJsonPretty(data_json, Serial);
Serial.println();
#endif
serializeJsonPretty(data_json, json);
json.close();
AudioInterrupts();
return (true);
}
else
{
#ifdef DEBUG
Serial.println(F("Write JSON data:"));
serializeJsonPretty(data_json, Serial);
Serial.println();
Serial.print(F("E : Cannot open "));
Serial.print(filename);
Serial.println(F(" on SD."));
#endif
serializeJsonPretty(data_json, json);
json.close();
AudioInterrupts();
return (false);
}
}
else
{
AudioInterrupts();
return (true);
return (false);
}
json.close();
AudioInterrupts();
}
#ifdef DEBUG
else
{
#ifdef DEBUG
Serial.print(F("E : Cannot open "));
Serial.print(filename);
Serial.println(F(" on SD."));
#endif
Serial.println(F("E: SD card not available"));
}
#endif
return (false);
}
@ -694,7 +708,7 @@ bool save_sd_voiceconfig_json(uint8_t vc, uint8_t instance_id)
{
File json;
StaticJsonDocument<JSON_BUFFER_SIZE> data_json;
sprintf(filename, "/%s/%d/%s%d.json", PERFORMANCE_CONFIG_PATH, vc, VOICE_CONFIG_NAME, instance_id);
sprintf(filename, "/%s/%d/%s%d.json", PERFORMANCE_CONFIG_PATH, vc, VOICE_CONFIG_NAME, instance_id + 1);
#ifdef DEBUG
Serial.print(F("Saving voice config "));
@ -1134,7 +1148,7 @@ bool save_sd_seq_sub_patterns_json(uint8_t seq_number)
{
File json;
StaticJsonDocument<JSON_BUFFER_SIZE> data_json;
sprintf(filename, "/%s/%d/%s.json", PERFORMANCE_CONFIG_PATH, seq_number, VELOCITY_CONFIG_NAME);
sprintf(filename, "/%s/%d/%s.json", PERFORMANCE_CONFIG_PATH, seq_number, PATTERN_CONFIG_NAME);
#ifdef DEBUG
Serial.print(F("Saving sequencer patterns "));
Serial.print(seq_number);
@ -1192,22 +1206,24 @@ bool save_sd_performance_json(uint8_t seq_number)
handleStop();
}
dac_mute();
AudioNoInterrupts();
save_sd_seq_sub_vel_json(seq_number);
save_sd_seq_sub_patterns_json(seq_number);
#ifdef DEBUG
Serial.print(F("Write performance config "));
Serial.print(seq_number);
Serial.print(F(" "));
Serial.println(seq_number);
#endif
save_sd_fx_json(seq_number);
for (uint8_t i = 0; i < MAX_DEXED; i++)
{
sprintf(filename, "/%s/%d/%s%d.json", PERFORMANCE_CONFIG_PATH, seq_number, VOICE_CONFIG_NAME, i);
#ifdef DEBUG
Serial.print(F("Write Voice-Config for sequencer"));
Serial.print(filename);
Serial.print(F(" "));
Serial.println(filename);
#endif
save_sd_voiceconfig_json(seq_number, i);
}
@ -1226,7 +1242,6 @@ bool save_sd_performance_json(uint8_t seq_number)
int columns = sizeof(seq_patternchain[0]);
int rows = total / columns;
Serial.print(F(" "));
SD.begin();
SD.remove(filename);
json = SD.open(filename, FILE_WRITE);
if (json)
@ -1290,14 +1305,56 @@ bool save_sd_performance_json(uint8_t seq_number)
}
json.close();
}
#ifdef DEBUG
else
{
#ifdef DEBUG
Serial.print(F("E : Cannot open "));
Serial.print(filename);
Serial.println(F(" on SD."));
}
#endif
return (false);
}
bool check_performance_directory(uint8_t seq_number)
{
char dir[CONFIG_FILENAME_LEN];
if (sd_card > 0)
{
sprintf(dir, "/%s/%d", PERFORMANCE_CONFIG_PATH, seq_number);
AudioNoInterrupts();
SD.begin();
if (!SD.exists(dir))
{
#ifdef DEBUG
if (SD.mkdir(dir))
{
Serial.print(F("Creating directory "));
Serial.println(dir);
}
else
{
Serial.print(F("E: Cannot create "));
Serial.println(dir);
AudioInterrupts();
return (false);
}
#else
SD.mkdir(dir);
#endif
}
AudioInterrupts();
return (true);
}
#ifdef DEBUG
else
{
Serial.println(F("E: SD card not available"));
}
#endif
return (false);
}

2
dexed_sd.h
Unescape View File

@ -66,6 +66,8 @@ bool save_sd_performance_json(uint8_t p);
bool load_sd_seq_json(uint8_t p);
bool save_sd_seq_json(uint8_t p);
bool check_performance_directory(uint8_t seq_number);
bool get_sd_data(File sysex, uint8_t format, uint8_t* conf);
bool write_sd_data(File sysex, uint8_t format, uint8_t* data, uint16_t len);

Write Preview
Loading…
Cancel
Save