Fixing menu selection.

MicroDexed.ino

@@ -144,7 +144,7 @@ void setup()
   // Enable Menu Rollover
   //LCDML.MENU_enRollover();
   // Enable Screensaver (screensaver menu function, time to activate in ms)
-  //LCDML.SCREEN_enable(UI_func_screensaver, 10000); // set to 10 seconds
+  //LCDML.SCREEN_enable(UI_voice_func_voice_selection, 10000); // set to 10 seconds
 #else
   Serial.println(F("NO LCD DISPLAY ENABLED!"));
 #endif

UI.hpp

@@ -76,6 +76,8 @@ void UI_func_stereo_mono(uint8_t param);
 void UI_func_polyphony(uint8_t param);
 void UI_func_engine(uint8_t param);
 void UI_func_information(uint8_t param);
+void UI_voice_func_bank_selection(uint8_t param);
+void UI_voice_func_voice_selection(uint8_t param);
 void UI_func_back(uint8_t param);
 void UI_func_goToRootMenu(uint8_t param);
 
@@ -114,8 +116,8 @@ LCDML_add(22, LCDML_0_4, 4, "Stereo/Mono", UI_func_stereo_mono);
 LCDML_add(23, LCDML_0_4, 5, "Polyphony", UI_func_polyphony);
 LCDML_add(24, LCDML_0_4, 6, "Engine", UI_func_engine);
 LCDML_add(25, LCDML_0, 5, "Info", UI_func_information);
-LCDML_add(26, LCDML_1, 1, "Bank", NULL);
+LCDML_add(26, LCDML_1, 1, "B01:DEFAULT", UI_voice_func_bank_selection);
-LCDML_add(27, LCDML_1, 2, "Voice", NULL);
+LCDML_add(27, LCDML_1, 2, "V01:INIT", UI_voice_func_voice_selection);
 #define _LCDML_DISP_cnt 27
 
 // create menu
@@ -204,74 +206,6 @@ void lcdml_menu_control(void)
   }
 }
 
-/*
-void lcdml_menu_control(void)
-{
-  // If something must init, put in in the setup condition
-  if (LCDML.BT_setup())
-  {
-    pinMode(BUT_R_PIN, INPUT_PULLUP);
-  }
-
-  //Volatile Variable
-  long g_LCDML_CONTROL_Encoder_position = ENCODER[ENC_R].read();
-  bool button_r = digitalRead(BUT_R_PIN);
-
-  if (g_LCDML_CONTROL_Encoder_position <= -3) {
-    if (!button_r)
-    {
-      LCDML.BT_left();
-      g_LCDML_CONTROL_button_prev[ENC_R] = LOW;
-      g_LCDML_CONTROL_button_press_time[ENC_R] = -1;
-    }
-    else
-    {
-      LCDML.BT_down();
-    }
-    ENCODER[ENC_R].write(g_LCDML_CONTROL_Encoder_position + 4);
-  }
-  else if (g_LCDML_CONTROL_Encoder_position >= 3)
-  {
-    if (!button_r)
-    {
-      LCDML.BT_right();
-      g_LCDML_CONTROL_button_prev[ENC_R] = LOW;
-      g_LCDML_CONTROL_button_press_time[ENC_R] = -1;
-    }
-    else
-    {
-      LCDML.BT_up();
-    }
-    ENCODER[ENC_R].write(g_LCDML_CONTROL_Encoder_position - 4);
-  }
-  else
-  {
-    if (!button_r && g_LCDML_CONTROL_button_prev[ENC_R]) //falling edge, button_r pressed
-    {
-      g_LCDML_CONTROL_button_prev[ENC_R] = LOW;
-      g_LCDML_CONTROL_button_press_time[ENC_R] = millis();
-    }
-    else if (button_r && !g_LCDML_CONTROL_button_prev) //rising edge, button_r not active
-    {
-      g_LCDML_CONTROL_button_prev[ENC_R] = HIGH;
-
-      if (g_LCDML_CONTROL_button_press_time[ENC_R] < 0)
-      {
-        g_LCDML_CONTROL_button_press_time[ENC_R] = millis();
-        //Reset for left right action
-      }
-      else if ((millis() - g_LCDML_CONTROL_button_press_time[ENC_R]) >= g_LCDML_CONTROL_button_long_press)
-      {
-        LCDML.BT_quit();
-      }
-      else if ((millis() - g_LCDML_CONTROL_button_press_time[ENC_R]) >= g_LCDML_CONTROL_button_short_press)
-      {
-        LCDML.BT_enter();
-      }
-    }
-  }
-}
-*/
 void lcdml_voice_menu_control(void)
 {
   // If something must init, put in in the setup condition
@@ -709,6 +643,60 @@ void UI_func_information(uint8_t param)
   }
 }
 
+void UI_voice_func_bank_selection(uint8_t param)
+{
+  if (LCDML_Voice.FUNC_setup())         // ****** SETUP *********
+  {
+    // update LCD content
+    lcd.setCursor(0, 0); // set cursor
+    lcd.print("B01:DEFAULT"); // print change content
+    lcd.setCursor(0, 1); // set cursor
+    lcd.print("Select Bank");
+    LCDML_Voice.FUNC_setLoopInterval(100);  // starts a trigger event for the loop function every 100 milliseconds
+  }
+
+  if (LCDML_Voice.FUNC_loop())
+  {
+    if (LCDML_Voice.BT_checkEnter()) // check if any button is pressed (enter, up, down, left, right)
+    {
+      LCDML_Voice.FUNC_goBackToMenu();  // leave this function
+    }
+  }
+
+  if (LCDML_Voice.FUNC_close())
+  {
+    // The screensaver go to the root menu
+    LCDML_Voice.MENU_goRoot();
+  }  
+}
+
+void UI_voice_func_voice_selection(uint8_t param)
+{
+  if (LCDML_Voice.FUNC_setup())         // ****** SETUP *********
+  {
+    // update LCD content
+    lcd.setCursor(0, 0); // set cursor
+    lcd.print("Select Voice"); // print change content
+    lcd.setCursor(0, 1); // set cursor
+    lcd.print("V01:INIT");
+    LCDML_Voice.FUNC_setLoopInterval(100);  // starts a trigger event for the loop function every 100 milliseconds
+  }
+
+  if (LCDML_Voice.FUNC_loop())
+  {
+    if (LCDML_Voice.BT_checkEnter()) // check if any button is pressed (enter, up, down, left, right)
+    {
+      LCDML_Voice.FUNC_goBackToMenu();  // leave this function
+    }
+  }
+
+  if (LCDML_Voice.FUNC_close())
+  {
+    // The screensaver go to the root menu
+    LCDML_Voice.MENU_goRoot();
+  }  
+}
+
 void UI_func_screensaver(uint8_t param)
 {
   if (LCDML.FUNC_setup())         // ****** SETUP *********