Started implementing json syntax config files.

pull/54/head
Holger Wirtz 3 years ago
parent 26a4af2f7d
commit 7f39351d3c
  1. 11
      dexed_sd.cpp
  2. 2
      dexed_sd.h
  3. 5
      third-party/ArduinoJson/ArduinoJson.h
  4. 1134
      third-party/ArduinoJson/CHANGELOG.md
  5. 26
      third-party/ArduinoJson/CMakeLists.txt
  6. 10
      third-party/ArduinoJson/CONTRIBUTING.md
  7. 10
      third-party/ArduinoJson/LICENSE.md
  8. 144
      third-party/ArduinoJson/README.md
  9. 27
      third-party/ArduinoJson/SUPPORT.md
  10. 22
      third-party/ArduinoJson/appveyor.yml
  11. 367
      third-party/ArduinoJson/banner.svg
  12. 1
      third-party/ArduinoJson/component.mk
  13. 160
      third-party/ArduinoJson/examples/JsonConfigFile/JsonConfigFile.ino
  14. 63
      third-party/ArduinoJson/examples/JsonFilterExample/JsonFilterExample.ino
  15. 77
      third-party/ArduinoJson/examples/JsonGeneratorExample/JsonGeneratorExample.ino
  16. 126
      third-party/ArduinoJson/examples/JsonHttpClient/JsonHttpClient.ino
  17. 80
      third-party/ArduinoJson/examples/JsonParserExample/JsonParserExample.ino
  18. 117
      third-party/ArduinoJson/examples/JsonServer/JsonServer.ino
  19. 106
      third-party/ArduinoJson/examples/JsonUdpBeacon/JsonUdpBeacon.ino
  20. 75
      third-party/ArduinoJson/examples/MsgPackParser/MsgPackParser.ino
  21. 72
      third-party/ArduinoJson/examples/ProgmemExample/ProgmemExample.ino
  22. 77
      third-party/ArduinoJson/examples/StringExample/StringExample.ino
  23. 4
      third-party/ArduinoJson/extras/ArduinoJsonConfig.cmake.in
  24. 94
      third-party/ArduinoJson/extras/CompileOptions.cmake
  25. 20
      third-party/ArduinoJson/extras/ci/arduino.sh
  26. 8
      third-party/ArduinoJson/extras/ci/espidf/CMakeLists.txt
  27. 6
      third-party/ArduinoJson/extras/ci/espidf/main/CMakeLists.txt
  28. 4
      third-party/ArduinoJson/extras/ci/espidf/main/component.mk
  29. 16
      third-party/ArduinoJson/extras/ci/espidf/main/main.cpp
  30. 10
      third-party/ArduinoJson/extras/ci/particle.sh
  31. 59
      third-party/ArduinoJson/extras/fuzzing/CMakeLists.txt
  32. 22
      third-party/ArduinoJson/extras/fuzzing/Makefile
  33. 11
      third-party/ArduinoJson/extras/fuzzing/json_fuzzer.cpp
  34. 10
      third-party/ArduinoJson/extras/fuzzing/json_seed_corpus/Comments.json
  35. 1
      third-party/ArduinoJson/extras/fuzzing/json_seed_corpus/EmptyArray.json
  36. 1
      third-party/ArduinoJson/extras/fuzzing/json_seed_corpus/EmptyObject.json
  37. 1
      third-party/ArduinoJson/extras/fuzzing/json_seed_corpus/ExcessiveNesting.json
  38. 1
      third-party/ArduinoJson/extras/fuzzing/json_seed_corpus/IntegerOverflow.json
  39. 24
      third-party/ArduinoJson/extras/fuzzing/json_seed_corpus/Numbers.json
  40. 53
      third-party/ArduinoJson/extras/fuzzing/json_seed_corpus/OpenWeatherMap.json
  41. 8
      third-party/ArduinoJson/extras/fuzzing/json_seed_corpus/Strings.json
  42. 90
      third-party/ArduinoJson/extras/fuzzing/json_seed_corpus/WeatherUnderground.json
  43. 11
      third-party/ArduinoJson/extras/fuzzing/msgpack_fuzzer.cpp
  44. BIN
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/array16
  45. BIN
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/array32
  46. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/false
  47. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/fixarray
  48. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/fixint_negative
  49. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/fixint_positive
  50. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/fixmap
  51. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/fixstr
  52. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/float32
  53. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/float64
  54. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/int16
  55. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/int32
  56. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/int64
  57. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/int8
  58. BIN
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/map16
  59. BIN
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/map32
  60. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/nil
  61. BIN
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/str16
  62. BIN
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/str32
  63. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/str8
  64. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/true
  65. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/uint16
  66. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/uint32
  67. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/uint64
  68. 1
      third-party/ArduinoJson/extras/fuzzing/msgpack_seed_corpus/uint8
  69. 50
      third-party/ArduinoJson/extras/fuzzing/reproducer.cpp
  70. 1
      third-party/ArduinoJson/extras/particle/project.properties
  71. 5
      third-party/ArduinoJson/extras/particle/src/smocktest.ino
  72. 23
      third-party/ArduinoJson/extras/scripts/build-arduino-package.sh
  73. 64
      third-party/ArduinoJson/extras/scripts/build-single-header.sh
  74. 14
      third-party/ArduinoJson/extras/scripts/get-release-body.sh
  75. 18
      third-party/ArduinoJson/extras/scripts/get-release-page.sh
  76. 18
      third-party/ArduinoJson/extras/scripts/publish-particle-library.sh
  77. 68
      third-party/ArduinoJson/extras/scripts/publish.sh
  78. 60
      third-party/ArduinoJson/extras/scripts/wandbox/JsonGeneratorExample.cpp
  79. 59
      third-party/ArduinoJson/extras/scripts/wandbox/JsonParserExample.cpp
  80. 68
      third-party/ArduinoJson/extras/scripts/wandbox/MsgPackParserExample.cpp
  81. 29
      third-party/ArduinoJson/extras/scripts/wandbox/publish.sh
  82. 29
      third-party/ArduinoJson/extras/tests/CMakeLists.txt
  83. 32
      third-party/ArduinoJson/extras/tests/Cpp11/CMakeLists.txt
  84. 58
      third-party/ArduinoJson/extras/tests/Cpp11/issue1120.cpp
  85. 39
      third-party/ArduinoJson/extras/tests/Cpp11/nullptr.cpp
  86. 16
      third-party/ArduinoJson/extras/tests/Cpp11/use_long_long_0.cpp
  87. 17
      third-party/ArduinoJson/extras/tests/Cpp11/use_long_long_1.cpp
  88. 29
      third-party/ArduinoJson/extras/tests/Cpp17/CMakeLists.txt
  89. 79
      third-party/ArduinoJson/extras/tests/Cpp17/string_view.cpp
  90. 48
      third-party/ArduinoJson/extras/tests/FailingBuilds/CMakeLists.txt
  91. 13
      third-party/ArduinoJson/extras/tests/FailingBuilds/Issue1189.cpp
  92. 13
      third-party/ArduinoJson/extras/tests/FailingBuilds/Issue978.cpp
  93. 12
      third-party/ArduinoJson/extras/tests/FailingBuilds/assign_char.cpp
  94. 12
      third-party/ArduinoJson/extras/tests/FailingBuilds/delete_jsondocument.cpp
  95. 20
      third-party/ArduinoJson/extras/tests/FailingBuilds/read_long_long.cpp
  96. 12
      third-party/ArduinoJson/extras/tests/FailingBuilds/variant_as_char.cpp
  97. 19
      third-party/ArduinoJson/extras/tests/FailingBuilds/write_long_long.cpp
  98. 9
      third-party/ArduinoJson/extras/tests/Helpers/Arduino.h
  99. 26
      third-party/ArduinoJson/extras/tests/Helpers/CustomReader.hpp
  100. 33
      third-party/ArduinoJson/extras/tests/Helpers/api/Print.h
  101. Some files were not shown because too many files have changed in this diff Show More

@ -27,6 +27,7 @@
#include "config.h"
#include <Wire.h>
#include <SD.h>
#include <ArduinoJson.h>
#include "synth_dexed.h"
#include "dexed_sd.h"
@ -683,6 +684,16 @@ bool save_sd_performance(uint8_t p)
/******************************************************************************
HELPER FUNCTIONS
******************************************************************************/
bool get_sd_data_json(File sysex, uint8_t* conf)
{
return(false);
}
bool write_sd_data_json(File sysex, uint16_t len)
{
return(false);
}
bool get_sd_data(File sysex, uint8_t format, uint8_t* conf)
{
uint16_t n;

@ -63,6 +63,8 @@ bool save_sd_fx(uint8_t fx);
bool load_sd_performance(int8_t p);
bool save_sd_performance(uint8_t p);
bool get_sd_data_json(File sysex, uint8_t* conf);
bool write_sd_data_json(File sysex, uint8_t* data, uint16_t len);
bool get_sd_data(File sysex, uint8_t format, uint8_t* conf);
bool write_sd_data(File sysex, uint8_t format, uint8_t* data, uint16_t len);
uint8_t calc_checksum(uint8_t* data, uint16_t len);

@ -0,0 +1,5 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
#include "src/ArduinoJson.h"

File diff suppressed because it is too large Load Diff

@ -0,0 +1,26 @@
# ArduinoJson - https://arduinojson.org
# Copyright Benoit Blanchon 2014-2021
# MIT License
cmake_minimum_required(VERSION 3.3)
if(ESP_PLATFORM)
# Build ArduinoJson as an ESP-IDF component
idf_component_register(INCLUDE_DIRS src)
target_compile_definitions(${COMPONENT_LIB} INTERFACE ARDUINOJSON_EMBEDDED_MODE=1)
return()
endif()
project(ArduinoJson VERSION 6.18.2)
if(CMAKE_PROJECT_NAME STREQUAL PROJECT_NAME)
include(CTest)
endif()
add_subdirectory(src)
if(CMAKE_PROJECT_NAME STREQUAL PROJECT_NAME AND BUILD_TESTING)
include(extras/CompileOptions.cmake)
add_subdirectory(extras/tests)
add_subdirectory(extras/fuzzing)
endif()

@ -0,0 +1,10 @@
# Contribution to ArduinoJson
First, thank you for taking the time to contribute to this project.
You can submit changes via GitHub Pull Requests.
Please:
1. Update the test suite for any change of behavior
2. Use clang-format in "file" mode to format the code

@ -0,0 +1,10 @@
The MIT License (MIT)
---------------------
Copyright © 2014-2021 Benoit BLANCHON
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

@ -0,0 +1,144 @@
![ArduinoJson](banner.svg)
---
[![arduino-library-badge](https://www.ardu-badge.com/badge/ArduinoJson.svg?version=6.18.2)](https://www.ardu-badge.com/ArduinoJson/6.18.2)
[![Continuous Integration](https://github.com/bblanchon/ArduinoJson/workflows/Continuous%20Integration/badge.svg?branch=6.x)](https://github.com/bblanchon/ArduinoJson/actions?query=workflow%3A%22Continuous+Integration%22+branch%3A6.x)
[![Continuous Integration](https://ci.appveyor.com/api/projects/status/m7s53wav1l0abssg/branch/6.x?svg=true)](https://ci.appveyor.com/project/bblanchon/arduinojson/branch/6.x)
[![Fuzzing Status](https://oss-fuzz-build-logs.storage.googleapis.com/badges/arduinojson.svg)](https://bugs.chromium.org/p/oss-fuzz/issues/list?sort=-opened&can=1&q=proj:arduinojson)
[![Coverage Status](https://coveralls.io/repos/github/bblanchon/ArduinoJson/badge.svg?branch=6.x)](https://coveralls.io/github/bblanchon/ArduinoJson?branch=6.x)
[![GitHub stars](https://img.shields.io/github/stars/bblanchon/ArduinoJson?style=flat)](https://github.com/bblanchon/ArduinoJson/stargazers)
ArduinoJson is a C++ JSON library for Arduino and IoT (Internet Of Things).
## Features
* [JSON deserialization](https://arduinojson.org/v6/api/json/deserializejson/?utm_source=github&utm_medium=readme)
* [Optionally decodes UTF-16 escape sequences to UTF-8](https://arduinojson.org/v6/api/config/decode_unicode/?utm_source=github&utm_medium=readme)
* [Optionally stores links to the input buffer (zero-copy)](https://arduinojson.org/v6/api/json/deserializejson/?utm_source=github&utm_medium=readme)
* [Optionally supports comments in the input](https://arduinojson.org/v6/api/config/enable_comments/?utm_source=github&utm_medium=readme)
* [Optionally filters the input to keep only desired values](https://arduinojson.org/v6/api/json/deserializejson/?utm_source=github&utm_medium=readme#filtering)
* Supports single quotes as a string delimiter
* Compatible with [NDJSON](http://ndjson.org/) and [JSON Lines](https://jsonlines.org/)
* [JSON serialization](https://arduinojson.org/v6/api/json/serializejson/?utm_source=github&utm_medium=readme)
* [Can write to a buffer or a stream](https://arduinojson.org/v6/api/json/serializejson/?utm_source=github&utm_medium=readme)
* [Optionally indents the document (prettified JSON)](https://arduinojson.org/v6/api/json/serializejsonpretty/?utm_source=github&utm_medium=readme)
* [MessagePack serialization](https://arduinojson.org/v6/api/msgpack/serializemsgpack/?utm_source=github&utm_medium=readme)
* [MessagePack deserialization](https://arduinojson.org/v6/api/msgpack/deserializemsgpack/?utm_source=github&utm_medium=readme)
* Efficient
* [Twice smaller than the "official" Arduino_JSON library](https://arduinojson.org/2019/11/19/arduinojson-vs-arduino_json/?utm_source=github&utm_medium=readme)
* [Almost 10% faster than the "official" Arduino_JSON library](https://arduinojson.org/2019/11/19/arduinojson-vs-arduino_json/?utm_source=github&utm_medium=readme)
* [Consumes roughly 10% less RAM than the "official" Arduino_JSON library](https://arduinojson.org/2019/11/19/arduinojson-vs-arduino_json/?utm_source=github&utm_medium=readme)
* [Fixed memory allocation, no heap fragmentation](https://arduinojson.org/v6/api/jsondocument/?utm_source=github&utm_medium=readme)
* [Optionally works without heap memory (zero malloc)](https://arduinojson.org/v6/api/staticjsondocument/?utm_source=github&utm_medium=readme)
* Deduplicates strings
* Versatile
* Supports [custom allocators (to use external RAM chip, for example)](https://arduinojson.org/v6/how-to/use-external-ram-on-esp32/?utm_source=github&utm_medium=readme)
* Supports [`String`](https://arduinojson.org/v6/api/config/enable_arduino_string/?utm_source=github&utm_medium=readme), [`std::string`](https://arduinojson.org/v6/api/config/enable_std_string/?utm_source=github&utm_medium=readme) and [`std::string_view`](https://arduinojson.org/v6/api/config/enable_string_view/?utm_source=github&utm_medium=readme)
* Supports [`Stream`](https://arduinojson.org/v6/api/config/enable_arduino_stream/?utm_source=github&utm_medium=readme) and [`std::istream`/`std::ostream`](https://arduinojson.org/v6/api/config/enable_std_stream/?utm_source=github&utm_medium=readme)
* Supports [Flash strings](https://arduinojson.org/v6/api/config/enable_progmem/?utm_source=github&utm_medium=readme)
* Supports [custom readers](https://arduinojson.org/v6/api/json/deserializejson/?utm_source=github&utm_medium=readme#custom-reader) and [custom writers](https://arduinojson.org/v6/api/json/serializejson/?utm_source=github&utm_medium=readme#custom-writer)
* Supports [custom converters](https://arduinojson.org/news/2021/05/04/version-6-18-0/?utm_source=github&utm_medium=readme)
* Portable
* Usable on any C++ project (not limited to Arduino)
* Compatible with C++98, C++11, C++14 and C++17
* Zero warnings with `-Wall -Wextra -pedantic` and `/W4`
* [Header-only library](https://en.wikipedia.org/wiki/Header-only)
* Works with virtually any board
* Arduino boards: [Uno](https://amzn.to/38aL2ik), [Due](https://amzn.to/36YkWi2), [Micro](https://amzn.to/35WkdwG), [Nano](https://amzn.to/2QTvwRX), [Mega](https://amzn.to/36XWhuf), [Yun](https://amzn.to/30odURc), [Leonardo](https://amzn.to/36XWjlR)...
* Espressif chips: [ESP8266](https://amzn.to/36YluV8), [ESP32](https://amzn.to/2G4pRCB)
* Lolin (WeMos) boards: [D1 mini](https://amzn.to/2QUpz7q), [D1 Mini Pro](https://amzn.to/36UsGSs)...
* Teensy boards: [4.0](https://amzn.to/30ljXGq), [3.2](https://amzn.to/2FT0EuC), [2.0](https://amzn.to/2QXUMXj)
* Particle boards: [Argon](https://amzn.to/2FQHa9X), [Boron](https://amzn.to/36WgLUd), [Electron](https://amzn.to/30vEc4k), [Photon](https://amzn.to/387F9Cd)...
* Texas Instruments boards: [MSP430](https://amzn.to/30nJWgg)...
* Tested on all major development environments
* [Arduino IDE](https://www.arduino.cc/en/Main/Software)
* [Atmel Studio](http://www.atmel.com/microsite/atmel-studio/)
* [Atollic TrueSTUDIO](https://atollic.com/truestudio/)
* [Energia](http://energia.nu/)
* [IAR Embedded Workbench](https://www.iar.com/iar-embedded-workbench/)
* [Keil uVision](http://www.keil.com/)
* [MPLAB X IDE](http://www.microchip.com/mplab/mplab-x-ide)
* [Particle](https://www.particle.io/)
* [PlatformIO](http://platformio.org/)
* [Sloeber plugin for Eclipse](https://eclipse.baeyens.it/)
* [Visual Micro](http://www.visualmicro.com/)
* [Visual Studio](https://www.visualstudio.com/)
* [Even works with online compilers like wandbox.org](https://wandbox.org/permlink/RlZSKy17DjJ6HcdN)
* [CMake friendly](https://arduinojson.org/v6/how-to/use-arduinojson-with-cmake/?utm_source=github&utm_medium=readme)
* Well designed
* [Elegant API](http://arduinojson.org/v6/example/?utm_source=github&utm_medium=readme)
* [Thread-safe](https://en.wikipedia.org/wiki/Thread_safety)
* Self-contained (no external dependency)
* `const` friendly
* [`for` friendly](https://arduinojson.org/v6/api/jsonobject/begin_end/?utm_source=github&utm_medium=readme)
* [TMP friendly](https://en.wikipedia.org/wiki/Template_metaprogramming)
* Handles [integer overflows](https://arduinojson.org/v6/api/jsonvariant/as/?utm_source=github&utm_medium=readme#integer-overflows)
* Well tested
* [Unit test coverage close to 100%](https://coveralls.io/github/bblanchon/ArduinoJson?branch=6.x)
* Continuously tested on
* [Visual Studio 2010, 2012, 2013, 2015, 2017, 2019](https://ci.appveyor.com/project/bblanchon/arduinojson/branch/6.x)
* [GCC 4.4, 4.6, 4.7, 4.8, 4.9, 5, 6, 7, 8, 9, 10](https://github.com/bblanchon/ArduinoJson/actions?query=workflow%3A%22Continuous+Integration%22)
* [Clang 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 5.0, 6.0, 7, 8, 9, 10](https://github.com/bblanchon/ArduinoJson/actions?query=workflow%3A%22Continuous+Integration%22)
* [Continuously fuzzed with Google OSS Fuzz](https://bugs.chromium.org/p/oss-fuzz/issues/list?sort=-opened&can=1&q=proj:arduinojson)
* Passes all default checks of [clang-tidy](https://releases.llvm.org/10.0.0/tools/clang/tools/extra/docs/clang-tidy/)
* Well documented
* [Tutorials](https://arduinojson.org/v6/doc/deserialization/?utm_source=github&utm_medium=readme)
* [Examples](https://arduinojson.org/v6/example/?utm_source=github&utm_medium=readme)
* [How-tos](https://arduinojson.org/v6/example/?utm_source=github&utm_medium=readme)
* [FAQ](https://arduinojson.org/v6/faq/?utm_source=github&utm_medium=readme)
* [Troubleshooter](https://arduinojson.org/v6/troubleshooter/?utm_source=github&utm_medium=readme)
* [Book](https://arduinojson.org/book/?utm_source=github&utm_medium=readme)
* [Changelog](CHANGELOG.md)
* Vibrant user community
* Most popular of all Arduino libraries on [GitHub](https://github.com/search?o=desc&q=arduino+library&s=stars&type=Repositories)
* [Used in hundreds of projects](https://www.hackster.io/search?i=projects&q=arduinojson)
* [Responsive support](https://github.com/bblanchon/ArduinoJson/issues?q=is%3Aissue+is%3Aclosed)
## Quickstart
### Deserialization
Here is a program that parses a JSON document with ArduinoJson.
```c++
char json[] = "{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
DynamicJsonDocument doc(1024);
deserializeJson(doc, json);
const char* sensor = doc["sensor"];
long time = doc["time"];
double latitude = doc["data"][0];
double longitude = doc["data"][1];
```
See the [tutorial on arduinojson.org](https://arduinojson.org/doc/decoding/?utm_source=github&utm_medium=readme)
### Serialization
Here is a program that generates a JSON document with ArduinoJson:
```c++
DynamicJsonDocument doc(1024);
doc["sensor"] = "gps";
doc["time"] = 1351824120;
doc["data"][0] = 48.756080;
doc["data"][1] = 2.302038;
serializeJson(doc, Serial);
// This prints:
// {"sensor":"gps","time":1351824120,"data":[48.756080,2.302038]}
```
See the [tutorial on arduinojson.org](https://arduinojson.org/doc/encoding/?utm_source=github&utm_medium=readme)
## Support the project ❤
Do you like this library?
Please [star this project on GitHub](https://github.com/bblanchon/ArduinoJson/stargazers)!
What? You don't like it but you *love* it?
You can support the project by [purchasing my book](https://arduinojson.org/book/?utm_source=github&utm_medium=readme).
Alternatively, you can make a recurring donation via [GitHub Sponsors](https://github.com/sponsors/bblanchon).

@ -0,0 +1,27 @@
# ArduinoJson Support
First off, thank you very much for using ArduinoJson.
We'll be very happy to help you, but first please read the following.
## Before asking for help
1. Read the [FAQ](https://arduinojson.org/faq/?utm_source=github&utm_medium=support)
2. Search in the [API Reference](https://arduinojson.org/api/?utm_source=github&utm_medium=support)
If you did not find the answer, please create a [new issue on GitHub](https://github.com/bblanchon/ArduinoJson/issues/new).
It is OK to add a comment to a currently opened issue, but please avoid adding comments to a closed issue.
## Before hitting the Submit button
Please provide all the relevant information:
* Good title
* Short description of the problem
* Target platform
* Compiler model and version
* [MVCE](https://stackoverflow.com/help/mcve)
* Compiler output
Good questions get fast answers!

@ -0,0 +1,22 @@
version: 6.18.2.{build}
environment:
matrix:
- APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2019
CMAKE_GENERATOR: Visual Studio 16 2019
- APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2017
CMAKE_GENERATOR: Visual Studio 15 2017
- APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2015
CMAKE_GENERATOR: Visual Studio 14 2015
- APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2013
CMAKE_GENERATOR: Visual Studio 12 2013
- CMAKE_GENERATOR: Visual Studio 11 2012
- CMAKE_GENERATOR: Visual Studio 10 2010
- CMAKE_GENERATOR: MinGW Makefiles
configuration: Debug
before_build:
- set PATH=C:\MinGW\bin;%PATH:C:\Program Files\Git\usr\bin;=% # Workaround for CMake not wanting sh.exe on PATH for MinGW
- cmake -DCMAKE_BUILD_TYPE=%CONFIGURATION% -G "%CMAKE_GENERATOR%" .
build_script:
- cmake --build . --config %CONFIGURATION%
test_script:
- ctest -C %CONFIGURATION% --output-on-failure .

File diff suppressed because one or more lines are too long

After

Width:  |  Height:  |  Size: 32 KiB

@ -0,0 +1 @@
COMPONENT_ADD_INCLUDEDIRS := src

@ -0,0 +1,160 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
//
// This example shows how to store your project configuration in a file.
// It uses the SD library but can be easily modified for any other file-system.
//
// The file contains a JSON document with the following content:
// {
// "hostname": "examples.com",
// "port": 2731
// }
//
// To run this program, you need an SD card connected to the SPI bus as follows:
// * MOSI <-> pin 11
// * MISO <-> pin 12
// * CLK <-> pin 13
// * CS <-> pin 4
//
// https://arduinojson.org/v6/example/config/
#include <ArduinoJson.h>
#include <SD.h>
#include <SPI.h>
// Our configuration structure.
//
// Never use a JsonDocument to store the configuration!
// A JsonDocument is *not* a permanent storage; it's only a temporary storage
// used during the serialization phase. See:
// https://arduinojson.org/v6/faq/why-must-i-create-a-separate-config-object/
struct Config {
char hostname[64];
int port;
};
const char *filename = "/config.txt"; // <- SD library uses 8.3 filenames
Config config; // <- global configuration object
// Loads the configuration from a file
void loadConfiguration(const char *filename, Config &config) {
// Open file for reading
File file = SD.open(filename);
// Allocate a temporary JsonDocument
// Don't forget to change the capacity to match your requirements.
// Use https://arduinojson.org/v6/assistant to compute the capacity.
StaticJsonDocument<512> doc;
// Deserialize the JSON document
DeserializationError error = deserializeJson(doc, file);
if (error)
Serial.println(F("Failed to read file, using default configuration"));
// Copy values from the JsonDocument to the Config
config.port = doc["port"] | 2731;
strlcpy(config.hostname, // <- destination
doc["hostname"] | "example.com", // <- source
sizeof(config.hostname)); // <- destination's capacity
// Close the file (Curiously, File's destructor doesn't close the file)
file.close();
}
// Saves the configuration to a file
void saveConfiguration(const char *filename, const Config &config) {
// Delete existing file, otherwise the configuration is appended to the file
SD.remove(filename);
// Open file for writing
File file = SD.open(filename, FILE_WRITE);
if (!file) {
Serial.println(F("Failed to create file"));
return;
}
// Allocate a temporary JsonDocument
// Don't forget to change the capacity to match your requirements.
// Use https://arduinojson.org/assistant to compute the capacity.
StaticJsonDocument<256> doc;
// Set the values in the document
doc["hostname"] = config.hostname;
doc["port"] = config.port;
// Serialize JSON to file
if (serializeJson(doc, file) == 0) {
Serial.println(F("Failed to write to file"));
}
// Close the file
file.close();
}
// Prints the content of a file to the Serial
void printFile(const char *filename) {
// Open file for reading
File file = SD.open(filename);
if (!file) {
Serial.println(F("Failed to read file"));
return;
}
// Extract each characters by one by one
while (file.available()) {
Serial.print((char)file.read());
}
Serial.println();
// Close the file
file.close();
}
void setup() {
// Initialize serial port
Serial.begin(9600);
while (!Serial) continue;
// Initialize SD library
const int chipSelect = 4;
while (!SD.begin(chipSelect)) {
Serial.println(F("Failed to initialize SD library"));
delay(1000);
}
// Should load default config if run for the first time
Serial.println(F("Loading configuration..."));
loadConfiguration(filename, config);
// Create configuration file
Serial.println(F("Saving configuration..."));
saveConfiguration(filename, config);
// Dump config file
Serial.println(F("Print config file..."));
printFile(filename);
}
void loop() {
// not used in this example
}
// Performance issue?
// ------------------
//
// File is an unbuffered stream, which is not optimal for ArduinoJson.
// See: https://arduinojson.org/v6/how-to/improve-speed/
// See also
// --------
//
// https://arduinojson.org/ contains the documentation for all the functions
// used above. It also includes an FAQ that will help you solve any
// serialization or deserialization problem.
//
// The book "Mastering ArduinoJson" contains a case study of a project that has
// a complex configuration with nested members.
// Contrary to this example, the project in the book uses the SPIFFS filesystem.
// Learn more at https://arduinojson.org/book/
// Use the coupon code TWENTY for a 20% discount ❤❤❤❤❤

@ -0,0 +1,63 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
//
// This example shows how to use DeserializationOpion::Filter
//
// https://arduinojson.org/v6/example/filter/
#include <ArduinoJson.h>
void setup() {
// Initialize serial port
Serial.begin(9600);
while (!Serial) continue;
// The huge input: an extract from OpenWeatherMap response
const __FlashStringHelper* input_json = F(
"{\"cod\":\"200\",\"message\":0,\"list\":[{\"dt\":1581498000,\"main\":{"
"\"temp\":3.23,\"feels_like\":-3.63,\"temp_min\":3.23,\"temp_max\":4.62,"
"\"pressure\":1014,\"sea_level\":1014,\"grnd_level\":1010,\"humidity\":"
"58,\"temp_kf\":-1.39},\"weather\":[{\"id\":800,\"main\":\"Clear\","
"\"description\":\"clear "
"sky\",\"icon\":\"01d\"}],\"clouds\":{\"all\":0},\"wind\":{\"speed\":6."
"19,\"deg\":266},\"sys\":{\"pod\":\"d\"},\"dt_txt\":\"2020-02-12 "
"09:00:00\"},{\"dt\":1581508800,\"main\":{\"temp\":6.09,\"feels_like\":-"
"1.07,\"temp_min\":6.09,\"temp_max\":7.13,\"pressure\":1015,\"sea_"
"level\":1015,\"grnd_level\":1011,\"humidity\":48,\"temp_kf\":-1.04},"
"\"weather\":[{\"id\":800,\"main\":\"Clear\",\"description\":\"clear "
"sky\",\"icon\":\"01d\"}],\"clouds\":{\"all\":9},\"wind\":{\"speed\":6."
"64,\"deg\":268},\"sys\":{\"pod\":\"d\"},\"dt_txt\":\"2020-02-12 "
"12:00:00\"}],\"city\":{\"id\":2643743,\"name\":\"London\",\"coord\":{"
"\"lat\":51.5085,\"lon\":-0.1257},\"country\":\"GB\",\"population\":"
"1000000,\"timezone\":0,\"sunrise\":1581492085,\"sunset\":1581527294}}");
// The filter: it contains "true" for each value we want to keep
StaticJsonDocument<200> filter;
filter["list"][0]["dt"] = true;
filter["list"][0]["main"]["temp"] = true;
// Deserialize the document
StaticJsonDocument<400> doc;
deserializeJson(doc, input_json, DeserializationOption::Filter(filter));
// Print the result
serializeJsonPretty(doc, Serial);
}
void loop() {
// not used in this example
}
// See also
// --------
//
// https://arduinojson.org/ contains the documentation for all the functions
// used above. It also includes an FAQ that will help you solve any
// deserialization problem.
//
// The book "Mastering ArduinoJson" contains a tutorial on deserialization.
// It begins with a simple example, like the one above, and then adds more
// features like deserializing directly from a file or an HTTP request.
// Learn more at https://arduinojson.org/book/
// Use the coupon code TWENTY for a 20% discount ❤❤❤❤❤

@ -0,0 +1,77 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
//
// This example shows how to generate a JSON document with ArduinoJson.
//
// https://arduinojson.org/v6/example/generator/
#include <ArduinoJson.h>
void setup() {
// Initialize Serial port
Serial.begin(9600);
while (!Serial) continue;
// Allocate the JSON document
//
// Inside the brackets, 200 is the RAM allocated to this document.
// Don't forget to change this value to match your requirement.
// Use https://arduinojson.org/v6/assistant to compute the capacity.
StaticJsonDocument<200> doc;
// StaticJsonObject allocates memory on the stack, it can be
// replaced by DynamicJsonDocument which allocates in the heap.
//
// DynamicJsonDocument doc(200);
// Add values in the document
//
doc["sensor"] = "gps";
doc["time"] = 1351824120;
// Add an array.
//
JsonArray data = doc.createNestedArray("data");
data.add(48.756080);
data.add(2.302038);
// Generate the minified JSON and send it to the Serial port.
//
serializeJson(doc, Serial);
// The above line prints:
// {"sensor":"gps","time":1351824120,"data":[48.756080,2.302038]}
// Start a new line
Serial.println();
// Generate the prettified JSON and send it to the Serial port.
//
serializeJsonPretty(doc, Serial);
// The above line prints:
// {
// "sensor": "gps",
// "time": 1351824120,
// "data": [
// 48.756080,
// 2.302038
// ]
// }
}
void loop() {
// not used in this example
}
// See also
// --------
//
// https://arduinojson.org/ contains the documentation for all the functions
// used above. It also includes an FAQ that will help you solve any
// serialization problem.
//
// The book "Mastering ArduinoJson" contains a tutorial on serialization.
// It begins with a simple example, like the one above, and then adds more
// features like serializing directly to a file or an HTTP request.
// Learn more at https://arduinojson.org/book/
// Use the coupon code TWENTY for a 20% discount ❤❤❤❤❤

@ -0,0 +1,126 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
//
// This example shows how to parse a JSON document in an HTTP response.
// It uses the Ethernet library, but can be easily adapted for Wifi.
//
// It performs a GET resquest on https://arduinojson.org/example.json
// Here is the expected response:
// {
// "sensor": "gps",
// "time": 1351824120,
// "data": [
// 48.756080,
// 2.302038
// ]
// }
//
// https://arduinojson.org/v6/example/http-client/
#include <ArduinoJson.h>
#include <Ethernet.h>
#include <SPI.h>
void setup() {
// Initialize Serial port
Serial.begin(9600);
while (!Serial) continue;
// Initialize Ethernet library
byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
if (!Ethernet.begin(mac)) {
Serial.println(F("Failed to configure Ethernet"));
return;
}
delay(1000);
Serial.println(F("Connecting..."));
// Connect to HTTP server
EthernetClient client;
client.setTimeout(10000);
if (!client.connect("arduinojson.org", 80)) {
Serial.println(F("Connection failed"));
return;
}
Serial.println(F("Connected!"));
// Send HTTP request
client.println(F("GET /example.json HTTP/1.0"));
client.println(F("Host: arduinojson.org"));
client.println(F("Connection: close"));
if (client.println() == 0) {
Serial.println(F("Failed to send request"));
client.stop();
return;
}
// Check HTTP status
char status[32] = {0};
client.readBytesUntil('\r', status, sizeof(status));
// It should be "HTTP/1.0 200 OK" or "HTTP/1.1 200 OK"
if (strcmp(status + 9, "200 OK") != 0) {
Serial.print(F("Unexpected response: "));
Serial.println(status);
client.stop();
return;
}
// Skip HTTP headers
char endOfHeaders[] = "\r\n\r\n";
if (!client.find(endOfHeaders)) {
Serial.println(F("Invalid response"));
client.stop();
return;
}
// Allocate the JSON document
// Use https://arduinojson.org/v6/assistant to compute the capacity.
const size_t capacity = JSON_OBJECT_SIZE(3) + JSON_ARRAY_SIZE(2) + 60;
DynamicJsonDocument doc(capacity);
// Parse JSON object
DeserializationError error = deserializeJson(doc, client);
if (error) {
Serial.print(F("deserializeJson() failed: "));
Serial.println(error.f_str());
client.stop();
return;
}
// Extract values
Serial.println(F("Response:"));
Serial.println(doc["sensor"].as<const char*>());
Serial.println(doc["time"].as<long>());
Serial.println(doc["data"][0].as<float>(), 6);
Serial.println(doc["data"][1].as<float>(), 6);
// Disconnect
client.stop();
}
void loop() {
// not used in this example
}
// Performance issue?
// ------------------
//
// EthernetClient is an unbuffered stream, which is not optimal for ArduinoJson.
// See: https://arduinojson.org/v6/how-to/improve-speed/
// See also
// --------
//
// https://arduinojson.org/ contains the documentation for all the functions
// used above. It also includes an FAQ that will help you solve any
// serialization problem.
//
// The book "Mastering ArduinoJson" contains a tutorial on deserialization
// showing how to parse the response from GitHub's API. In the last chapter,
// it shows how to parse the huge documents from OpenWeatherMap
// and Reddit.
// Learn more at https://arduinojson.org/book/
// Use the coupon code TWENTY for a 20% discount ❤❤❤❤❤

@ -0,0 +1,80 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
//
// This example shows how to deserialize a JSON document with ArduinoJson.
//
// https://arduinojson.org/v6/example/parser/
#include <ArduinoJson.h>
void setup() {
// Initialize serial port
Serial.begin(9600);
while (!Serial) continue;
// Allocate the JSON document
//
// Inside the brackets, 200 is the capacity of the memory pool in bytes.
// Don't forget to change this value to match your JSON document.
// Use https://arduinojson.org/v6/assistant to compute the capacity.
StaticJsonDocument<200> doc;
// StaticJsonDocument<N> allocates memory on the stack, it can be
// replaced by DynamicJsonDocument which allocates in the heap.
//
// DynamicJsonDocument doc(200);
// JSON input string.
//
// Using a char[], as shown here, enables the "zero-copy" mode. This mode uses
// the minimal amount of memory because the JsonDocument stores pointers to
// the input buffer.
// If you use another type of input, ArduinoJson must copy the strings from
// the input to the JsonDocument, so you need to increase the capacity of the
// JsonDocument.
char json[] =
"{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
// Deserialize the JSON document
DeserializationError error = deserializeJson(doc, json);
// Test if parsing succeeds.
if (error) {
Serial.print(F("deserializeJson() failed: "));
Serial.println(error.f_str());
return;
}
// Fetch values.
//
// Most of the time, you can rely on the implicit casts.
// In other case, you can do doc["time"].as<long>();
const char* sensor = doc["sensor"];
long time = doc["time"];
double latitude = doc["data"][0];
double longitude = doc["data"][1];
// Print values.
Serial.println(sensor);
Serial.println(time);
Serial.println(latitude, 6);
Serial.println(longitude, 6);
}
void loop() {
// not used in this example
}
// See also
// --------
//
// https://arduinojson.org/ contains the documentation for all the functions
// used above. It also includes an FAQ that will help you solve any
// deserialization problem.
//
// The book "Mastering ArduinoJson" contains a tutorial on deserialization.
// It begins with a simple example, like the one above, and then adds more
// features like deserializing directly from a file or an HTTP request.
// Learn more at https://arduinojson.org/book/
// Use the coupon code TWENTY for a 20% discount ❤❤❤❤❤

@ -0,0 +1,117 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
//
// This example shows how to implement an HTTP server that sends a JSON document
// in the response.
// It uses the Ethernet library but can be easily adapted for Wifi.
//
// The JSON document contains the values of the analog and digital pins.
// It looks like that:
// {
// "analog": [0, 76, 123, 158, 192, 205],
// "digital": [1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0]
// }
//
// https://arduinojson.org/v6/example/http-server/
#include <ArduinoJson.h>
#include <Ethernet.h>
#include <SPI.h>
byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
EthernetServer server(80);
void setup() {
// Initialize serial port
Serial.begin(9600);
while (!Serial) continue;
// Initialize Ethernet libary
if (!Ethernet.begin(mac)) {
Serial.println(F("Failed to initialize Ethernet library"));
return;
}
// Start to listen
server.begin();
Serial.println(F("Server is ready."));
Serial.print(F("Please connect to http://"));
Serial.println(Ethernet.localIP());
}
void loop() {
// Wait for an incomming connection
EthernetClient client = server.available();
// Do we have a client?
if (!client)
return;
Serial.println(F("New client"));
// Read the request (we ignore the content in this example)
while (client.available()) client.read();
// Allocate a temporary JsonDocument
// Use https://arduinojson.org/v6/assistant to compute the capacity.
StaticJsonDocument<500> doc;
// Create the "analog" array
JsonArray analogValues = doc.createNestedArray("analog");
for (int pin = 0; pin < 6; pin++) {
// Read the analog input
int value = analogRead(pin);
// Add the value at the end of the array
analogValues.add(value);
}
// Create the "digital" array
JsonArray digitalValues = doc.createNestedArray("digital");
for (int pin = 0; pin < 14; pin++) {
// Read the digital input
int value = digitalRead(pin);
// Add the value at the end of the array
digitalValues.add(value);
}
Serial.print(F("Sending: "));
serializeJson(doc, Serial);
Serial.println();
// Write response headers
client.println(F("HTTP/1.0 200 OK"));
client.println(F("Content-Type: application/json"));
client.println(F("Connection: close"));
client.print(F("Content-Length: "));
client.println(measureJsonPretty(doc));
client.println();
// Write JSON document
serializeJsonPretty(doc, client);
// Disconnect
client.stop();
}
// Performance issue?
// ------------------
//
// EthernetClient is an unbuffered stream, which is not optimal for ArduinoJson.
// See: https://arduinojson.org/v6/how-to/improve-speed/
// See also
// --------
//
// https://arduinojson.org/ contains the documentation for all the functions
// used above. It also includes an FAQ that will help you solve any
// serialization problem.
//
// The book "Mastering ArduinoJson" contains a tutorial on serialization.
// It begins with a simple example, then adds more features like serializing
// directly to a file or an HTTP client.
// Learn more at https://arduinojson.org/book/
// Use the coupon code TWENTY for a 20% discount ❤❤❤❤❤

@ -0,0 +1,106 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
//
// This example shows how to send a JSON document to a UDP socket.
// At regular interval, it sends a UDP packet that contains the status of
// analog and digital pins.
// It looks like that:
// {
// "analog": [0, 76, 123, 158, 192, 205],
// "digital": [1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0]
// }
//
// If you want to test this program, you need to be able to receive the UDP
// packets.
// For example, you can run netcat on your computer
// $ ncat -ulp 8888
// See https://nmap.org/ncat/
//
// https://arduinojson.org/v6/example/udp-beacon/
#include <ArduinoJson.h>
#include <Ethernet.h>
#include <SPI.h>
byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
IPAddress remoteIp(192, 168, 0, 108); // <- EDIT!!!!
unsigned short remotePort = 8888;
unsigned short localPort = 8888;
EthernetUDP udp;
void setup() {
// Initialize serial port
Serial.begin(9600);
while (!Serial) continue;
// Initialize Ethernet libary
if (!Ethernet.begin(mac)) {
Serial.println(F("Failed to initialize Ethernet library"));
return;
}
// Enable UDP
udp.begin(localPort);
}
void loop() {
// Allocate a temporary JsonDocument
// Use https://arduinojson.org/v6/assistant to compute the capacity.
StaticJsonDocument<500> doc;
// Create the "analog" array
JsonArray analogValues = doc.createNestedArray("analog");
for (int pin = 0; pin < 6; pin++) {
// Read the analog input
int value = analogRead(pin);
// Add the value at the end of the array
analogValues.add(value);
}
// Create the "digital" array
JsonArray digitalValues = doc.createNestedArray("digital");
for (int pin = 0; pin < 14; pin++) {
// Read the digital input
int value = digitalRead(pin);
// Add the value at the end of the array
digitalValues.add(value);
}
// Log
Serial.print(F("Sending to "));
Serial.print(remoteIp);
Serial.print(F(" on port "));
Serial.println(remotePort);
serializeJson(doc, Serial);
// Send UDP packet
udp.beginPacket(remoteIp, remotePort);
serializeJson(doc, udp);
udp.println();
udp.endPacket();
// Wait
delay(10000);
}
// Performance issue?
// ------------------
//
// EthernetUDP is an unbuffered stream, which is not optimal for ArduinoJson.
// See: https://arduinojson.org/v6/how-to/improve-speed/
// See also
// --------
//
// https://arduinojson.org/ contains the documentation for all the functions
// used above. It also includes an FAQ that will help you solve any
// serialization problem.
//
// The book "Mastering ArduinoJson" contains a tutorial on serialization.
// It begins with a simple example, then adds more features like serializing
// directly to a file or any stream.
// Learn more at https://arduinojson.org/book/
// Use the coupon code TWENTY for a 20% discount ❤❤❤❤❤

@ -0,0 +1,75 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
//
// This example shows how to deserialize a MessagePack document with
// ArduinoJson.
//
// https://arduinojson.org/v6/example/msgpack-parser/
#include <ArduinoJson.h>
void setup() {
// Initialize serial port
Serial.begin(9600);
while (!Serial) continue;
// Allocate the JSON document
//
// Inside the brackets, 200 is the capacity of the memory pool in bytes.
// Don't forget to change this value to match your JSON document.
// Use https://arduinojson.org/v6/assistant to compute the capacity.
StaticJsonDocument<200> doc;
// StaticJsonObject allocates memory on the stack, it can be
// replaced by DynamicJsonObject which allocates in the heap.
//
// DynamicJsonObject doc(200);
// MessagePack input string.
//
// Using a char[], as shown here, enables the "zero-copy" mode. This mode uses
// the minimal amount of memory because the JsonDocument stores pointers to
// the input buffer.
// If you use another type of input, ArduinoJson must copy the strings from
// the input to the JsonDocument, so you need to increase the capacity of the
// JsonDocument.
uint8_t input[] = {131, 166, 115, 101, 110, 115, 111, 114, 163, 103, 112, 115,
164, 116, 105, 109, 101, 206, 80, 147, 50, 248, 164, 100,
97, 116, 97, 146, 203, 64, 72, 96, 199, 58, 188, 148,
112, 203, 64, 2, 106, 146, 230, 33, 49, 169};
// This MessagePack document contains:
// {
// "sensor": "gps",
// "time": 1351824120,
// "data": [48.75608, 2.302038]
// }
DeserializationError error = deserializeMsgPack(doc, input);
// Test if parsing succeeded.
if (error) {
Serial.print("deserializeMsgPack() failed: ");
Serial.println(error.f_str());
return;
}
// Fetch values.
//
// Most of the time, you can rely on the implicit casts.
// In other case, you can do doc["time"].as<long>();
const char* sensor = doc["sensor"];
long time = doc["time"];
double latitude = doc["data"][0];
double longitude = doc["data"][1];
// Print values.
Serial.println(sensor);
Serial.println(time);
Serial.println(latitude, 6);
Serial.println(longitude, 6);
}
void loop() {
// not used in this example
}

@ -0,0 +1,72 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
//
// This example shows the different ways you can use Flash strings with
// ArduinoJson.
//
// Use Flash strings sparingly, because ArduinoJson duplicates them in the
// JsonDocument. Prefer plain old char*, as they are more efficient in term of
// code size, speed, and memory usage.
//
// https://arduinojson.org/v6/example/progmem/
#include <ArduinoJson.h>
void setup() {
#ifdef PROGMEM // <- check that Flash strings are supported
DynamicJsonDocument doc(1024);
// You can use a Flash String as your JSON input.
// WARNING: the strings in the input will be duplicated in the JsonDocument.
deserializeJson(doc, F("{\"sensor\":\"gps\",\"time\":1351824120,"
"\"data\":[48.756080,2.302038]}"));
JsonObject obj = doc.as<JsonObject>();
// You can use a Flash String to get an element of a JsonObject
// No duplication is done.
long time = obj[F("time")];
// You can use a Flash String to set an element of a JsonObject
// WARNING: the content of the Flash String will be duplicated in the
// JsonDocument.
obj[F("time")] = time;
// You can set a Flash String to a JsonObject or JsonArray:
// WARNING: the content of the Flash String will be duplicated in the
// JsonDocument.
obj["sensor"] = F("gps");
// It works with serialized() too:
obj["sensor"] = serialized(F("\"gps\""));
obj["sensor"] = serialized(F("\xA3gps"), 3);
// You can compare the content of a JsonVariant to a Flash String
if (obj["sensor"] == F("gps")) {
// ...
}
#else
#warning PROGMEM is not supported on this platform
#endif
}
void loop() {
// not used in this example
}
// See also
// --------
//
// https://arduinojson.org/ contains the documentation for all the functions
// used above. It also includes an FAQ that will help you solve any memory
// problem.
//
// The book "Mastering ArduinoJson" contains a quick C++ course that explains
// how your microcontroller stores strings in memory. It also tells why you
// should not abuse Flash strings with ArduinoJson.
// Learn more at https://arduinojson.org/book/
// Use the coupon code TWENTY for a 20% discount ❤❤❤❤❤

@ -0,0 +1,77 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
//
// This example shows the different ways you can use String with ArduinoJson.
//
// Use String objects sparingly, because ArduinoJson duplicates them in the
// JsonDocument. Prefer plain old char[], as they are more efficient in term of
// code size, speed, and memory usage.
//
// https://arduinojson.org/v6/example/string/
#include <ArduinoJson.h>
void setup() {
DynamicJsonDocument doc(1024);
// You can use a String as your JSON input.
// WARNING: the string in the input will be duplicated in the JsonDocument.
String input =
"{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
deserializeJson(doc, input);
JsonObject obj = doc.as<JsonObject>();
// You can use a String to get an element of a JsonObject
// No duplication is done.
long time = obj[String("time")];
// You can use a String to set an element of a JsonObject
// WARNING: the content of the String will be duplicated in the JsonDocument.
obj[String("time")] = time;
// You can get a String from a JsonObject or JsonArray:
// No duplication is done, at least not in the JsonDocument.
String sensor = obj["sensor"];
// Unfortunately, the following doesn't work (issue #118):
// sensor = obj["sensor"]; // <- error "ambiguous overload for 'operator='"
// As a workaround, you need to replace by:
sensor = obj["sensor"].as<String>();
// You can set a String to a JsonObject or JsonArray:
// WARNING: the content of the String will be duplicated in the JsonDocument.
obj["sensor"] = sensor;
// It works with serialized() too:
obj["sensor"] = serialized(sensor);
// You can also concatenate strings
// WARNING: the content of the String will be duplicated in the JsonDocument.
obj[String("sen") + "sor"] = String("gp") + "s";
// You can compare the content of a JsonObject with a String
if (obj["sensor"] == sensor) {
// ...
}
// Lastly, you can print the resulting JSON to a String
String output;
serializeJson(doc, output);
}
void loop() {
// not used in this example
}
// See also
// --------
//
// https://arduinojson.org/ contains the documentation for all the functions
// used above. It also includes an FAQ that will help you solve any problem.
//
// The book "Mastering ArduinoJson" contains a quick C++ course that explains
// how your microcontroller stores strings in memory. On several occasions, it
// shows how you can avoid String in your program.
// Learn more at https://arduinojson.org/book/
// Use the coupon code TWENTY for a 20% discount ❤❤❤❤❤

@ -0,0 +1,4 @@
@PACKAGE_INIT@
include("${CMAKE_CURRENT_LIST_DIR}/@PROJECT_NAME@Targets.cmake")
check_required_components("@PROJECT_NAME@")

@ -0,0 +1,94 @@
if(CMAKE_CXX_COMPILER_ID MATCHES "(GNU|Clang)")
add_compile_options(
-pedantic
-Wall
-Wcast-align
-Wcast-qual
-Wconversion
-Wctor-dtor-privacy
-Wdisabled-optimization
-Werror
-Wextra
-Wformat=2
-Winit-self
-Wmissing-include-dirs
-Wnon-virtual-dtor
-Wold-style-cast
-Woverloaded-virtual
-Wparentheses
-Wredundant-decls
-Wshadow
-Wsign-promo
-Wstrict-aliasing
-Wundef
)
if(${COVERAGE})
set(CMAKE_CXX_FLAGS "-fprofile-arcs -ftest-coverage")
endif()
endif()
if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
if((CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 4.8) AND (NOT ${COVERAGE}))
add_compile_options(-g -Og)
else()
add_compile_options(-g -O0)
endif()
add_compile_options(
-Wstrict-null-sentinel
-Wno-vla # Allow VLA in tests
)
add_definitions(-DHAS_VARIABLE_LENGTH_ARRAY)
if(CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 4.5)
add_compile_options(-Wlogical-op) # the flag exists in 4.4 but is buggy
endif()
if(CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 4.6)
add_compile_options(-Wnoexcept)
endif()
endif()
if(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
add_compile_options(
-Wc++11-compat
-Wdeprecated-register
-Wno-vla-extension # Allow VLA in tests
)
add_definitions(
-DHAS_VARIABLE_LENGTH_ARRAY
-DSUBSCRIPT_CONFLICTS_WITH_BUILTIN_OPERATOR
)
endif()
if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
if((CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 4.0) AND (NOT ${COVERAGE}))
add_compile_options(-g -Og)
else()
add_compile_options(-g -O0)
endif()
endif()
if(CMAKE_CXX_COMPILER_ID STREQUAL "AppleClang")
if((CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 9.0) AND (NOT ${COVERAGE}))
add_compile_options(-g -Og)
else()
add_compile_options(-g -O0)
endif()
endif()
if(MSVC)
add_definitions(-D_CRT_SECURE_NO_WARNINGS)
add_compile_options(
/W4 # Set warning level
/WX # Treats all compiler warnings as errors.
)
if (NOT MSVC_VERSION LESS 1910) # >= Visual Studio 2017
add_compile_options(
/Zc:__cplusplus # Enable updated __cplusplus macro
)
endif()
endif()

@ -0,0 +1,20 @@
#!/bin/bash -eux
/sbin/start-stop-daemon --start --quiet --pidfile /tmp/custom_xvfb_1.pid --make-pidfile --background --exec /usr/bin/Xvfb -- :1 -ac -screen 0 1280x1024x16
sleep 3
export DISPLAY=:1.0
mkdir -p /tmp/arduino
curl -sS http://downloads.arduino.cc/arduino-$VERSION-linux64.tar.xz | tar xJ -C /tmp/arduino --strip 1 ||
curl -sS http://downloads.arduino.cc/arduino-$VERSION-linux64.tgz | tar xz -C /tmp/arduino --strip 1
export PATH=$PATH:/tmp/arduino/
if [[ "$BOARD" =~ "arduino:samd:" ]]; then
arduino --install-boards arduino:samd
fi
ln -s $PWD /tmp/arduino/libraries/ArduinoJson
for EXAMPLE in $PWD/examples/*/*.ino; do
arduino --verify --board $BOARD $EXAMPLE
done

@ -0,0 +1,8 @@
# ArduinoJson - https://arduinojson.org
# Copyright Benoit Blanchon 2014-2021
# MIT License
cmake_minimum_required(VERSION 3.5)
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
project(example)

@ -0,0 +1,6 @@
# ArduinoJson - https://arduinojson.org
# Copyright Benoit Blanchon 2014-2021
# MIT License
idf_component_register(SRCS "main.cpp"
INCLUDE_DIRS "")

@ -0,0 +1,4 @@
#
# "main" pseudo-component makefile.
#
# (Uses default behaviour of compiling all source files in directory, adding 'include' to include path.)

@ -0,0 +1,16 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
#include <ArduinoJson.h>
extern "C" void app_main() {
char buffer[256];
StaticJsonDocument<200> doc;
doc["hello"] = "world";
serializeJson(doc, buffer);
deserializeJson(doc, buffer);
serializeMsgPack(doc, buffer);
deserializeMsgPack(doc, buffer);
}

@ -0,0 +1,10 @@
#!/bin/sh -ex
BOARD=$1
cd "$(dirname "$0")/../../"
cp extras/particle/src/smocktest.ino src/
cp extras/particle/project.properties ./
particle compile "$BOARD"

@ -0,0 +1,59 @@
# ArduinoJson - https://arduinojson.org
# Copyright Benoit Blanchon 2014-2021
# MIT License
if(MSVC)
add_compile_options(-D_CRT_SECURE_NO_WARNINGS)
endif()
add_executable(msgpack_reproducer
msgpack_fuzzer.cpp
reproducer.cpp
)
target_link_libraries(msgpack_reproducer
ArduinoJson
)
add_executable(json_reproducer
json_fuzzer.cpp
reproducer.cpp
)
target_link_libraries(json_reproducer
ArduinoJson
)
macro(add_fuzzer name)
set(FUZZER "${name}_fuzzer")
set(CORPUS_DIR "${CMAKE_CURRENT_SOURCE_DIR}/${name}_corpus")
set(SEED_CORPUS_DIR "${CMAKE_CURRENT_SOURCE_DIR}/${name}_seed_corpus")
add_executable("${FUZZER}"
"${name}_fuzzer.cpp"
)
target_link_libraries("${FUZZER}"
ArduinoJson
)
set_target_properties("${FUZZER}"
PROPERTIES
COMPILE_FLAGS
"-fprofile-instr-generate -fcoverage-mapping -fsanitize=fuzzer -fno-sanitize-recover=all"
LINK_FLAGS
"-fprofile-instr-generate -fcoverage-mapping -fsanitize=fuzzer -fno-sanitize-recover=all"
)
add_test(
NAME
"${FUZZER}"
COMMAND
"${FUZZER}" "${CORPUS_DIR}" "${SEED_CORPUS_DIR}" -max_total_time=5 -timeout=1
)
set_tests_properties("${FUZZER}"
PROPERTIES
LABELS "Fuzzing"
)
endmacro()
if (CMAKE_CXX_COMPILER_ID STREQUAL "Clang" AND CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 6)
add_fuzzer(json)
add_fuzzer(msgpack)
endif()

@ -0,0 +1,22 @@
# CAUTION: this file is invoked by https://github.com/google/oss-fuzz
CXXFLAGS += -I../../src -DARDUINOJSON_DEBUG=1
all: \
$(OUT)/json_fuzzer \
$(OUT)/json_fuzzer_seed_corpus.zip \
$(OUT)/json_fuzzer.options \
$(OUT)/msgpack_fuzzer \
$(OUT)/msgpack_fuzzer_seed_corpus.zip \
$(OUT)/msgpack_fuzzer.options
$(OUT)/%_fuzzer: %_fuzzer.cpp $(shell find ../../src -type f)
$(CXX) $(CXXFLAGS) $< -o$@ $(LIB_FUZZING_ENGINE)
$(OUT)/%_fuzzer_seed_corpus.zip: %_seed_corpus/*
zip -j $@ $?
$(OUT)/%_fuzzer.options:
@echo "[libfuzzer]" > $@
@echo "max_len = 256" >> $@
@echo "timeout = 10" >> $@

@ -0,0 +1,11 @@
#include <ArduinoJson.h>
extern "C" int LLVMFuzzerTestOneInput(const uint8_t *data, size_t size) {
DynamicJsonDocument doc(4096);
DeserializationError error = deserializeJson(doc, data, size);
if (!error) {
std::string json;
serializeJson(doc, json);
}
return 0;
}

@ -0,0 +1,10 @@
//comment
/*comment*/
[ //comment
/*comment*/"comment"/*comment*/,//comment
/*comment*/{//comment
/* comment*/"key"//comment
: //comment
"value"//comment
}/*comment*/
]//comment

@ -0,0 +1 @@
[1,[2,[3,[4,[5,[6,[7,[8,[9,[10,[11,[12,[13,[14,[15,[16,[17,[18,[19,[20,[21,[22,[23,[24,[25,[26,[27,[28,[29,[30,[31,[32,[33,[34,[35,[36,[37,[38,[39,[40,[41,[42,[43,[44,[45,[46,[47,[48,[49,[50,[51,[52,[53,[54,[55,[56,[57,[58,[59,[60,[61,[62,[63,[64,[65,[66,[67,[68,[69,[70,[71,[72,[73,[74,[75,[76,[77,[78,[79,[80,[81,[82,[83,[84,[85,[86,[87,[88,[89,[90,[91,[92,[93,[94,[95,[96,[97,[98,[99,[100,[101,[102,[103,[104,[105,[106,[107,[108,[109,[110,[111,[112,[113,[114,[115,[116,[117,[118,[119,[120]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

@ -0,0 +1,24 @@
[
123,
-123,
123.456,
-123.456,
12e34,
12e-34,
12e+34,
12E34,
12E-34,
12E+34,
12.34e56,
12.34e-56,
12.34e+56,
12.34E56,
12.34E-56,
12.34E+56,
NaN,
-NaN,
+NaN,
Infinity,
+Infinity,
-Infinity
]

@ -0,0 +1,53 @@
{
"coord": {
"lon": -0.13,
"lat": 51.51
},
"weather": [
{
"id": 301,
"main": "Drizzle",
"description": "drizzle",
"icon": "09n"
},
{
"id": 701,
"main": "Mist",
"description": "mist",
"icon": "50n"
},
{
"id": 741,
"main": "Fog",
"description": "fog",
"icon": "50n"
}
],
"base": "stations",
"main": {
"temp": 281.87,
"pressure": 1032,
"humidity": 100,
"temp_min": 281.15,
"temp_max": 283.15
},
"visibility": 2900,
"wind": {
"speed": 1.5
},
"clouds": {
"all": 90
},
"dt": 1483820400,
"sys": {
"type": 1,
"id": 5091,
"message": 0.0226,
"country": "GB",
"sunrise": 1483776245,
"sunset": 1483805443
},
"id": 2643743,
"name": "London",
"cod": 200
}

@ -0,0 +1,8 @@
[
"hello",
'hello',
hello,
{"hello":"world"},
{'hello':'world'},
{hello:world}
]

@ -0,0 +1,90 @@
{
"response": {
"version": "0.1",
"termsofService": "http://www.wunderground.com/weather/api/d/terms.html",
"features": {
"conditions": 1
}
},
"current_observation": {
"image": {
"url": "http://icons-ak.wxug.com/graphics/wu2/logo_130x80.png",
"title": "Weather Underground",
"link": "http://www.wunderground.com"
},
"display_location": {
"full": "San Francisco, CA",
"city": "San Francisco",
"state": "CA",
"state_name": "California",
"country": "US",
"country_iso3166": "US",
"zip": "94101",
"latitude": "37.77500916",
"longitude": "-122.41825867",
"elevation": "47.00000000"
},
"observation_location": {
"full": "SOMA - Near Van Ness, San Francisco, California",
"city": "SOMA - Near Van Ness, San Francisco",
"state": "California",
"country": "US",
"country_iso3166": "US",
"latitude": "37.773285",
"longitude": "-122.417725",
"elevation": "49 ft"
},
"estimated": {},
"station_id": "KCASANFR58",
"observation_time": "Last Updated on June 27, 5:27 PM PDT",
"observation_time_rfc822": "Wed, 27 Jun 2012 17:27:13 -0700",
"observation_epoch": "1340843233",
"local_time_rfc822": "Wed, 27 Jun 2012 17:27:14 -0700",
"local_epoch": "1340843234",
"local_tz_short": "PDT",
"local_tz_long": "America/Los_Angeles",
"local_tz_offset": "-0700",
"weather": "Partly Cloudy",
"temperature_string": "66.3 F (19.1 C)",
"temp_f": 66.3,
"temp_c": 19.1,
"relative_humidity": "65%",
"wind_string": "From the NNW at 22.0 MPH Gusting to 28.0 MPH",
"wind_dir": "NNW",
"wind_degrees": 346,
"wind_mph": 22,
"wind_gust_mph": "28.0",
"wind_kph": 35.4,
"wind_gust_kph": "45.1",
"pressure_mb": "1013",
"pressure_in": "29.93",
"pressure_trend": "+",
"dewpoint_string": "54 F (12 C)",
"dewpoint_f": 54,
"dewpoint_c": 12,
"heat_index_string": "NA",
"heat_index_f": "NA",
"heat_index_c": "NA",
"windchill_string": "NA",
"windchill_f": "NA",
"windchill_c": "NA",
"feelslike_string": "66.3 F (19.1 C)",
"feelslike_f": "66.3",
"feelslike_c": "19.1",
"visibility_mi": "10.0",
"visibility_km": "16.1",
"solarradiation": "",
"UV": "5",
"precip_1hr_string": "0.00 in ( 0 mm)",
"precip_1hr_in": "0.00",
"precip_1hr_metric": " 0",
"precip_today_string": "0.00 in (0 mm)",
"precip_today_in": "0.00",
"precip_today_metric": "0",
"icon": "partlycloudy",
"icon_url": "http://icons-ak.wxug.com/i/c/k/partlycloudy.gif",
"forecast_url": "http://www.wunderground.com/US/CA/San_Francisco.html",
"history_url": "http://www.wunderground.com/history/airport/KCASANFR58/2012/6/27/DailyHistory.html",
"ob_url": "http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.773285,-122.417725"
}
}

@ -0,0 +1,11 @@
#include <ArduinoJson.h>
extern "C" int LLVMFuzzerTestOneInput(const uint8_t *data, size_t size) {
DynamicJsonDocument doc(4096);
DeserializationError error = deserializeMsgPack(doc, data, size);
if (!error) {
std::string json;
serializeMsgPack(doc, json);
}
return 0;
}

@ -0,0 +1 @@
<EFBFBD>4Vx<EFBFBD><EFBFBD><EFBFBD><EFBFBD>

@ -0,0 +1,50 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
// This file is NOT use by Google's OSS fuzz
// I only use it to reproduce the bugs found
#include <stdint.h> // size_t
#include <stdio.h> // fopen et al.
#include <stdlib.h> // exit
#include <iostream>
#include <vector>
extern "C" int LLVMFuzzerTestOneInput(const uint8_t* data, size_t size);
std::vector<uint8_t> read(const char* path) {
FILE* f = fopen(path, "rb");
if (!f) {
std::cerr << "Failed to open " << path << std::endl;
exit(1);
}
fseek(f, 0, SEEK_END);
size_t size = static_cast<size_t>(ftell(f));
fseek(f, 0, SEEK_SET);
std::vector<uint8_t> buffer(size);
if (fread(buffer.data(), 1, size, f) != size) {
fclose(f);
std::cerr << "Failed to read " << path << std::endl;
exit(1);
}
fclose(f);
return buffer;
}
int main(int argc, const char* argv[]) {
if (argc < 2) {
std::cerr << "Usage: msgpack_fuzzer files" << std::endl;
return 1;
}
for (int i = 1; i < argc; i++) {
std::cout << "Loading " << argv[i] << std::endl;
std::vector<uint8_t> buffer = read(argv[i]);
LLVMFuzzerTestOneInput(buffer.data(), buffer.size());
}
return 0;
}

@ -0,0 +1,5 @@
#include "ArduinoJson.h"
void setup() {}
void loop() {}

@ -0,0 +1,23 @@
#!/bin/bash
set -eu
INPUT=$1
OUTPUT=$2
cd "$INPUT"
# remove existing file
rm -f "$OUTPUT"
# create zip
7z a "$OUTPUT" \
-xr!.vs \
CHANGELOG.md \
examples \
src \
keywords.txt \
library.properties \
LICENSE.md \
README.md \
ArduinoJson.h

@ -0,0 +1,64 @@
#!/bin/bash
set -e
RE_RELATIVE_INCLUDE='^#[[:space:]]*include[[:space:]]*"(.*)"'
RE_ABSOLUTE_INCLUDE='^#[[:space:]]*include[[:space:]]*<(ArduinoJson/.*)>'
RE_SYSTEM_INCLUDE='^#[[:space:]]*include[[:space:]]*<(.*)>'
RE_EMPTY='^(#[[:space:]]*pragma[[:space:]]+once)?[[:space:]]*(//.*)?$'
SRC_DIRECTORY="$(realpath "$(dirname $0)/../../src")"
declare -A INCLUDED
process()
{
local PARENT=$1
local FOLDER=$(dirname $1)
local SHOW_COMMENT=$2
while IFS= read -r LINE; do
if [[ $LINE =~ $RE_ABSOLUTE_INCLUDE ]]; then
local CHILD=${BASH_REMATCH[1]}
local CHILD_PATH
CHILD_PATH=$(realpath "$SRC_DIRECTORY/$CHILD")
echo "$PARENT -> $CHILD" >&2
if [[ ! ${INCLUDED[$CHILD_PATH]} ]]; then
INCLUDED[$CHILD_PATH]=true
process "$CHILD" false
fi
elif [[ $LINE =~ $RE_RELATIVE_INCLUDE ]]; then
local CHILD=${BASH_REMATCH[1]}
pushd "$FOLDER" > /dev/null
local CHILD_PATH
CHILD_PATH=$(realpath "$CHILD")
echo "$PARENT -> $CHILD" >&2
if [[ ! ${INCLUDED[$CHILD_PATH]} ]]; then
INCLUDED[$CHILD_PATH]=true
process "$CHILD" false
fi
popd > /dev/null
elif [[ $LINE =~ $RE_SYSTEM_INCLUDE ]]; then
local CHILD=${BASH_REMATCH[1]}
echo "$PARENT -> <$CHILD>" >&2
if [[ ! ${INCLUDED[$CHILD]} ]]; then
echo "#include <$CHILD>"
INCLUDED[$CHILD]=true
fi
elif [[ "${SHOW_COMMENT}" = "true" ]] ; then
echo "$LINE"
elif [[ ! $LINE =~ $RE_EMPTY ]]; then
echo "$LINE"
fi
done < $PARENT
}
simplify_namespaces() {
perl -p0i -e 's|\} // namespace ARDUINOJSON_NAMESPACE\r?\nnamespace ARDUINOJSON_NAMESPACE \{\r?\n||igs' "$1"
rm -f "$1.bak"
}
INCLUDED=()
INPUT=$1
OUTPUT=$2
process "$INPUT" true > "$OUTPUT"
simplify_namespaces "$OUTPUT"

@ -0,0 +1,14 @@
#!/bin/bash
set -eu
TAG="$1"
CHANGELOG="$2"
cat << END
## Changes
$(awk '/\* /{ FOUND=1; print; next } { if (FOUND) exit}' "$CHANGELOG")
[View version history](https://github.com/bblanchon/ArduinoJson/blob/$TAG/CHANGELOG.md)
END

@ -0,0 +1,18 @@
#!/bin/bash
set -eu
TAG="$1"
CHANGELOG="$2"
FRONTMATTER="$3"
cat << END
---
branch: v6
version: $TAG
date: '$(date +'%Y-%m-%d')'
$(cat "$FRONTMATTER")
---
$(awk '/\* /{ FOUND=1; print; next } { if (FOUND) exit}' "$CHANGELOG")
END

@ -0,0 +1,18 @@
#!/usr/bin/env bash
set -eu
SOURCE_DIR="$(dirname "$0")/../.."
WORK_DIR=$(mktemp -d)
trap 'rm -rf "$WORK_DIR"' EXIT
cp "$SOURCE_DIR/README.md" "$WORK_DIR/README.md"
cp "$SOURCE_DIR/CHANGELOG.md" "$WORK_DIR/CHANGELOG.md"
cp "$SOURCE_DIR/library.properties" "$WORK_DIR/library.properties"
cp "$SOURCE_DIR/LICENSE.md" "$WORK_DIR/LICENSE.txt"
cp -r "$SOURCE_DIR/src" "$WORK_DIR/"
cp -r "$SOURCE_DIR/examples" "$WORK_DIR/"
cd "$WORK_DIR"
particle library upload
particle library publish

@ -0,0 +1,68 @@
#!/usr/bin/env bash
set -eu
cd "$(dirname "$0")/../.."
VERSION="$1"
DATE=$(date +%F)
TAG="v$VERSION"
VERSION_REGEX="[0-9a-z\\.\\-]+"
update_version_in_source () {
IFS=".-" read MAJOR MINOR REVISION EXTRA < <(echo "$VERSION")
UNDERLINE=$(printf -- '-%.0s' $(seq 1 ${#TAG}))
sed -i~ -bE "s/version=$VERSION_REGEX/version=$VERSION/; s|ardu-badge.com/ArduinoJson/$VERSION_REGEX|ardu-badge.com/ArduinoJson/$VERSION|; " README.md
rm README.md~
sed -i~ -bE "4s/HEAD/$TAG ($DATE)/; 5s/-+/$UNDERLINE/" CHANGELOG.md
rm CHANGELOG.md~
sed -i~ -bE "s/(project\\s*\\(ArduinoJson\\s+VERSION\\s+).*?\\)/\\1$MAJOR.$MINOR.$REVISION)/" CMakeLists.txt
rm CMakeLists.txt~
sed -i~ -bE "s/\"version\":.*$/\"version\": \"$VERSION\",/" library.json
rm library.json~
sed -i~ -bE "s/version=.*$/version=$VERSION/" library.properties
rm library.properties~
sed -i~ -bE "s/version: .*$/version: $VERSION.{build}/" appveyor.yml
rm appveyor.yml~
sed -i~ -bE \
-e "s/ARDUINOJSON_VERSION .*$/ARDUINOJSON_VERSION \"$VERSION\"/" \
-e "s/ARDUINOJSON_VERSION_MAJOR .*$/ARDUINOJSON_VERSION_MAJOR $MAJOR/" \
-e "s/ARDUINOJSON_VERSION_MINOR .*$/ARDUINOJSON_VERSION_MINOR $MINOR/" \
-e "s/ARDUINOJSON_VERSION_REVISION .*$/ARDUINOJSON_VERSION_REVISION $REVISION/" \
src/ArduinoJson/version.hpp
rm src/ArduinoJson/version.hpp*~
}
commit_new_version () {
git add src/ArduinoJson/version.hpp README.md CHANGELOG.md library.json library.properties appveyor.yml CMakeLists.txt
git commit -m "Set version to $VERSION"
}
add_tag () {
CHANGES=$(awk '/\* /{ FOUND=1; print; next } { if (FOUND) exit}' CHANGELOG.md)
git tag -m "ArduinoJson $VERSION"$'\n'"$CHANGES" "$TAG"
}
push () {
git push --follow-tags
}
update_version_in_source
commit_new_version
add_tag
push
extras/scripts/build-arduino-package.sh . "../ArduinoJson-$TAG.zip"
extras/scripts/build-single-header.sh "src/ArduinoJson.h" "../ArduinoJson-$TAG.h"
extras/scripts/build-single-header.sh "src/ArduinoJson.hpp" "../ArduinoJson-$TAG.hpp"
extras/scripts/wandbox/publish.sh "../ArduinoJson-$TAG.h" > "../ArduinoJson-$TAG-wandbox.txt"
extras/scripts/get-release-page.sh "$TAG" "CHANGELOG.md" "../ArduinoJson-$TAG-wandbox.txt" > "../ArduinoJson-$TAG.md"
echo "You can now copy ../ArduinoJson-$TAG.md into arduinojson.org/collections/_versions/$VERSION.md"

@ -0,0 +1,60 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
//
// This example shows how to generate a JSON document with ArduinoJson.
#include <iostream>
#include "ArduinoJson.h"
int main() {
// Allocate the JSON document
//
// Inside the brackets, 200 is the RAM allocated to this document.
// Don't forget to change this value to match your requirement.
// Use https://arduinojson.org/v6/assistant to compute the capacity.
StaticJsonDocument<200> doc;
// StaticJsonObject allocates memory on the stack, it can be
// replaced by DynamicJsonDocument which allocates in the heap.
//
// DynamicJsonDocument doc(200);
// StaticJsonObject allocates memory on the stack, it can be
// replaced by DynamicJsonDocument which allocates in the heap.
//
// DynamicJsonDocument doc(200);
// Add values in the document
//
doc["sensor"] = "gps";
doc["time"] = 1351824120;
// Add an array.
//
JsonArray data = doc.createNestedArray("data");
data.add(48.756080);
data.add(2.302038);
// Generate the minified JSON and send it to STDOUT
//
serializeJson(doc, std::cout);
// The above line prints:
// {"sensor":"gps","time":1351824120,"data":[48.756080,2.302038]}
// Start a new line
std::cout << std::endl;
// Generate the prettified JSON and send it to STDOUT
//
serializeJsonPretty(doc, std::cout);
// The above line prints:
// {
// "sensor": "gps",
// "time": 1351824120,
// "data": [
// 48.756080,
// 2.302038
// ]
// }
}

@ -0,0 +1,59 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
//
// This example shows how to deserialize a JSON document with ArduinoJson.
#include <iostream>
#include "ArduinoJson.h"
int main() {
// Allocate the JSON document
//
// Inside the brackets, 200 is the capacity of the memory pool in bytes.
// Don't forget to change this value to match your JSON document.
// Use https://arduinojson.org/v6/assistant to compute the capacity.
StaticJsonDocument<300> doc;
// StaticJsonDocument<N> allocates memory on the stack, it can be
// replaced by DynamicJsonDocument which allocates in the heap.
//
// DynamicJsonDocument doc(200);
// JSON input string.
//
// Using a char[], as shown here, enables the "zero-copy" mode. This mode uses
// the minimal amount of memory because the JsonDocument stores pointers to
// the input buffer.
// If you use another type of input, ArduinoJson must copy the strings from
// the input to the JsonDocument, so you need to increase the capacity of the
// JsonDocument.
char json[] =
"{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
// Deserialize the JSON document
DeserializationError error = deserializeJson(doc, json);
// Test if parsing succeeds.
if (error) {
std::cerr << "deserializeJson() failed: " << error.c_str() << std::endl;
return 1;
}
// Fetch values.
//
// Most of the time, you can rely on the implicit casts.
// In other case, you can do doc["time"].as<long>();
const char* sensor = doc["sensor"];
long time = doc["time"];
double latitude = doc["data"][0];
double longitude = doc["data"][1];
// Print values.
std::cout << sensor << std::endl;
std::cout << time << std::endl;
std::cout << latitude << std::endl;
std::cout << longitude << std::endl;
return 0;
}

@ -0,0 +1,68 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
//
// This example shows how to generate a JSON document with ArduinoJson.
#include <iostream>
#include "ArduinoJson.h"
int main() {
// Allocate the JSON document
//
// Inside the brackets, 300 is the size of the memory pool in bytes.
// Don't forget to change this value to match your JSON document.
// Use https://arduinojson.org/assistant to compute the capacity.
StaticJsonDocument<300> doc;
// StaticJsonObject allocates memory on the stack, it can be
// replaced by DynamicJsonObject which allocates in the heap.
//
// DynamicJsonObject doc(200);
// MessagePack input string.
//
// It's better to use a char[] as shown here.
// If you use a const char* or a String, ArduinoJson will
// have to make a copy of the input in the JsonBuffer.
uint8_t input[] = {131, 166, 115, 101, 110, 115, 111, 114, 163, 103, 112, 115,
164, 116, 105, 109, 101, 206, 80, 147, 50, 248, 164, 100,
97, 116, 97, 146, 203, 64, 72, 96, 199, 58, 188, 148,
112, 203, 64, 2, 106, 146, 230, 33, 49, 169};
// This MessagePack document contains:
// {
// "sensor": "gps",
// "time": 1351824120,
// "data": [48.75608, 2.302038]
// }
// doc of the object tree.
//
// It's a reference to the JsonObject, the actual bytes are inside the
// JsonBuffer with all the other nodes of the object tree.
// Memory is freed when jsonBuffer goes out of scope.
DeserializationError error = deserializeMsgPack(doc, input);
// Test if parsing succeeds.
if (error) {
std::cerr << "deserializeMsgPack() failed: " << error.c_str() << std::endl;
return 1;
}
// Fetch values.
//
// Most of the time, you can rely on the implicit casts.
// In other case, you can do doc["time"].as<long>();
const char* sensor = doc["sensor"];
long time = doc["time"];
double latitude = doc["data"][0];
double longitude = doc["data"][1];
// Print values.
std::cout << sensor << std::endl;
std::cout << time << std::endl;
std::cout << latitude << std::endl;
std::cout << longitude << std::endl;
return 0;
}

@ -0,0 +1,29 @@
#!/usr/bin/env bash
set -eu
ARDUINOJSON_H="$1"
read_string() {
jq --slurp --raw-input '.' "$1"
}
compile() {
FILE_PATH="$(dirname $0)/$1.cpp"
cat >parameters.json <<END
{
"code":$(read_string "$FILE_PATH"),
"codes": [{"file":"ArduinoJson.h","code":$(read_string "$ARDUINOJSON_H")}],
"options": "warning",
"compiler": "gcc-4.9.3",
"save": true
}
END
URL=$(curl -sS -H "Content-type: application/json" -d @parameters.json https://wandbox.org/api/compile.json | jq --raw-output .url)
rm parameters.json
echo "$1: $URL"
}
compile "JsonGeneratorExample"
compile "JsonParserExample"
compile "MsgPackParserExample"

@ -0,0 +1,29 @@
# ArduinoJson - https://arduinojson.org
# Copyright Benoit Blanchon 2014-2021
# MIT License
set(CMAKE_CXX_STANDARD 98)
set(CMAKE_CXX_STANDARD_REQUIRED ON)
add_subdirectory(catch)
link_libraries(ArduinoJson catch)
include_directories(Helpers)
add_subdirectory(Cpp11)
add_subdirectory(Cpp17)
add_subdirectory(FailingBuilds)
add_subdirectory(IntegrationTests)
add_subdirectory(JsonArray)
add_subdirectory(JsonDeserializer)
add_subdirectory(JsonDocument)
add_subdirectory(JsonObject)
add_subdirectory(JsonSerializer)
add_subdirectory(JsonVariant)
add_subdirectory(MemoryPool)
add_subdirectory(Misc)
add_subdirectory(MixedConfiguration)
add_subdirectory(MsgPackDeserializer)
add_subdirectory(MsgPackSerializer)
add_subdirectory(Numbers)
add_subdirectory(TextFormatter)

@ -0,0 +1,32 @@
# ArduinoJson - https://arduinojson.org
# Copyright Benoit Blanchon 2014-2021
# MIT License
if("cxx_nullptr" IN_LIST CMAKE_CXX_COMPILE_FEATURES)
list(APPEND SOURCES nullptr.cpp)
add_definitions(-DARDUINOJSON_HAS_NULLPTR=1)
endif()
if("cxx_auto_type" IN_LIST CMAKE_CXX_COMPILE_FEATURES AND "cxx_constexpr" IN_LIST CMAKE_CXX_COMPILE_FEATURES)
list(APPEND SOURCES issue1120.cpp)
endif()
if("cxx_long_long_type" IN_LIST CMAKE_CXX_COMPILE_FEATURES)
list(APPEND SOURCES use_long_long_0.cpp use_long_long_1.cpp)
endif()
if(NOT SOURCES)
return()
endif()
set(CMAKE_CXX_STANDARD 11)
set(CMAKE_CXX_STANDARD_REQUIRED ON)
add_executable(Cpp11Tests ${SOURCES})
add_test(Cpp11 Cpp11Tests)
set_tests_properties(Cpp11
PROPERTIES
LABELS "Catch"
)

@ -0,0 +1,58 @@
#include <ArduinoJson.h>
#include <catch.hpp>
TEST_CASE("Issue #1120") {
StaticJsonDocument<500> doc;
constexpr char str[] =
"{\"contents\":[{\"module\":\"Packet\"},{\"module\":\"Analog\"}]}";
deserializeJson(doc, str);
SECTION("MemberProxy<std::string>::isNull()") {
SECTION("returns false") {
auto value = doc[std::string("contents")];
CHECK(value.isNull() == false);
}
SECTION("returns true") {
auto value = doc[std::string("zontents")];
CHECK(value.isNull() == true);
}
}
SECTION("ElementProxy<MemberProxy<const char*> >::isNull()") {
SECTION("returns false") { // Issue #1120
auto value = doc["contents"][1];
CHECK(value.isNull() == false);
}
SECTION("returns true") {
auto value = doc["contents"][2];
CHECK(value.isNull() == true);
}
}
SECTION("MemberProxy<ElementProxy<MemberProxy>, const char*>::isNull()") {
SECTION("returns false") {
auto value = doc["contents"][1]["module"];
CHECK(value.isNull() == false);
}
SECTION("returns true") {
auto value = doc["contents"][1]["zodule"];
CHECK(value.isNull() == true);
}
}
SECTION("MemberProxy<ElementProxy<MemberProxy>, std::string>::isNull()") {
SECTION("returns false") {
auto value = doc["contents"][1][std::string("module")];
CHECK(value.isNull() == false);
}
SECTION("returns true") {
auto value = doc["contents"][1][std::string("zodule")];
CHECK(value.isNull() == true);
}
}
}

@ -0,0 +1,39 @@
#include <ArduinoJson.h>
#include <catch.hpp>
#if !ARDUINOJSON_HAS_NULLPTR
# error ARDUINOJSON_HAS_NULLPTR must be set to 1
#endif
TEST_CASE("nullptr") {
DynamicJsonDocument doc(4096);
JsonVariant variant = doc.to<JsonVariant>();
SECTION("JsonVariant == nullptr") {
REQUIRE((variant == nullptr));
REQUIRE_FALSE((variant != nullptr));
}
SECTION("JsonVariant != nullptr") {
variant.set(42);
REQUIRE_FALSE((variant == nullptr));
REQUIRE((variant != nullptr));
}
SECTION("JsonVariant.set(nullptr)") {
variant.set(42);
variant.set(nullptr);
REQUIRE(variant.isNull());
}
SECTION("JsonVariant.is<nullptr_t>()") {
variant.set(42);
REQUIRE(variant.is<std::nullptr_t>() == false);
variant.clear();
REQUIRE(variant.is<std::nullptr_t>() == true);
}
}

@ -0,0 +1,16 @@
#define ARDUINOJSON_USE_LONG_LONG 0
#include <ArduinoJson.h>
#include <catch.hpp>
TEST_CASE("ARDUINOJSON_USE_LONG_LONG == 0") {
DynamicJsonDocument doc(4096);
doc["A"] = 42;
doc["B"] = 84;
std::string json;
serializeJson(doc, json);
REQUIRE(json == "{\"A\":42,\"B\":84}");
}

@ -0,0 +1,17 @@
#define ARDUINOJSON_USE_LONG_LONG 1
#include <ArduinoJson.h>
#include <catch.hpp>
TEST_CASE("ARDUINOJSON_USE_LONG_LONG == 1") {
DynamicJsonDocument doc(4096);
JsonObject root = doc.to<JsonObject>();
root["A"] = 123456789123456789;
root["B"] = 987654321987654321;
std::string json;
serializeJson(doc, json);
REQUIRE(json == "{\"A\":123456789123456789,\"B\":987654321987654321}");
}

@ -0,0 +1,29 @@
# ArduinoJson - https://arduinojson.org
# Copyright Benoit Blanchon 2014-2021
# MIT License
if(MSVC_VERSION LESS 1910)
return()
endif()
if(CMAKE_CXX_COMPILER_ID MATCHES "Clang" AND CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5)
return()
endif()
if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU" AND CMAKE_CXX_COMPILER_VERSION VERSION_LESS 7)
return()
endif()
set(CMAKE_CXX_STANDARD 17)
set(CMAKE_CXX_STANDARD_REQUIRED ON)
add_executable(Cpp17Tests
string_view.cpp
)
add_test(Cpp17 Cpp17Tests)
set_tests_properties(Cpp17
PROPERTIES
LABELS "Catch"
)

@ -0,0 +1,79 @@
#include <ArduinoJson.h>
#include <catch.hpp>
#include <string_view>
#if !ARDUINOJSON_ENABLE_STRING_VIEW
# error ARDUINOJSON_ENABLE_STRING_VIEW must be set to 1
#endif
TEST_CASE("string_view") {
StaticJsonDocument<128> doc;
JsonVariant variant = doc.to<JsonVariant>();
SECTION("deserializeJson()") {
auto err = deserializeJson(doc, std::string_view("123", 2));
REQUIRE(err == DeserializationError::Ok);
REQUIRE(doc.as<int>() == 12);
}
SECTION("JsonDocument::set()") {
doc.set(std::string_view("123", 2));
REQUIRE(doc.as<std::string>() == "12");
}
SECTION("JsonDocument::operator[]() const") {
doc["ab"] = "Yes";
doc["abc"] = "No";
REQUIRE(doc[std::string_view("abc", 2)] == "Yes");
}
SECTION("JsonDocument::operator[]()") {
doc[std::string_view("abc", 2)] = "Yes";
REQUIRE(doc["ab"] == "Yes");
}
SECTION("JsonVariant::operator==()") {
variant.set("A");
REQUIRE(variant == std::string_view("AX", 1));
REQUIRE_FALSE(variant == std::string_view("BX", 1));
}
SECTION("JsonVariant::operator>()") {
variant.set("B");
REQUIRE(variant > std::string_view("AX", 1));
REQUIRE_FALSE(variant > std::string_view("CX", 1));
}
SECTION("JsonVariant::operator<()") {
variant.set("B");
REQUIRE(variant < std::string_view("CX", 1));
REQUIRE_FALSE(variant < std::string_view("AX", 1));
}
SECTION("String deduplication") {
doc.add(std::string_view("example one", 7));
REQUIRE(doc.memoryUsage() == JSON_ARRAY_SIZE(1) + 8);
doc.add(std::string_view("example two", 7));
REQUIRE(doc.memoryUsage() == JSON_ARRAY_SIZE(2) + 8);
}
}
using ARDUINOJSON_NAMESPACE::adaptString;
TEST_CASE("StringViewAdapter") {
std::string_view str("bravoXXX", 5);
auto adapter = adaptString(str);
CHECK(adapter.compare(NULL) > 0);
CHECK(adapter.compare("alpha") > 0);
CHECK(adapter.compare("bravo") == 0);
CHECK(adapter.compare("charlie") < 0);
CHECK(adapter.equals("bravo"));
CHECK_FALSE(adapter.equals("charlie"));
CHECK_FALSE(adapter.equals(NULL));
CHECK(adapter.size() == 5);
}

@ -0,0 +1,48 @@
# ArduinoJson - https://arduinojson.org
# Copyright Benoit Blanchon 2014-2021
# MIT License
macro(build_should_fail target)
set_target_properties(${target}
PROPERTIES
EXCLUDE_FROM_ALL TRUE
EXCLUDE_FROM_DEFAULT_BUILD TRUE
)
add_test(
NAME
${target}
COMMAND
${CMAKE_COMMAND} --build . --target ${target} --config $<CONFIGURATION>
WORKING_DIRECTORY
${CMAKE_BINARY_DIR}
)
set_tests_properties(${target}
PROPERTIES
WILL_FAIL TRUE
LABELS "WillFail;Catch"
)
endmacro()
add_executable(Issue978 Issue978.cpp)
build_should_fail(Issue978)
add_executable(Issue1189 Issue1189.cpp)
build_should_fail(Issue1189)
add_executable(read_long_long read_long_long.cpp)
set_property(TARGET read_long_long PROPERTY CXX_STANDARD 11)
build_should_fail(read_long_long)
add_executable(write_long_long write_long_long.cpp)
set_property(TARGET write_long_long PROPERTY CXX_STANDARD 11)
build_should_fail(write_long_long)
add_executable(delete_jsondocument delete_jsondocument.cpp)
build_should_fail(delete_jsondocument)
add_executable(variant_as_char variant_as_char.cpp)
build_should_fail(variant_as_char)
add_executable(assign_char assign_char.cpp)
build_should_fail(assign_char)

@ -0,0 +1,13 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
#include <ArduinoJson.h>
// a function should not be able to get a JsonDocument by value
void f(JsonDocument) {}
int main() {
DynamicJsonDocument doc(1024);
f(doc);
}

@ -0,0 +1,13 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
#include <ArduinoJson.h>
struct Stream {};
int main() {
Stream* stream = 0;
DynamicJsonDocument doc(1024);
deserializeJson(doc, stream);
}

@ -0,0 +1,12 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
#include <ArduinoJson.h>
// See issue #1498
int main() {
DynamicJsonDocument doc(1024);
doc["dummy"] = 'A';
}

@ -0,0 +1,12 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
#include <ArduinoJson.h>
struct Stream {};
int main() {
JsonDocument* doc = new DynamicJsonDocument(42);
delete doc;
}

@ -0,0 +1,20 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
#define ARDUINOJSON_USE_LONG_LONG 0
#include <ArduinoJson.h>
#if defined(__SIZEOF_LONG__) && __SIZEOF_LONG__ >= 8
# error This test requires sizeof(long) < 8
#endif
#if !ARDUINOJSON_HAS_LONG_LONG
# error This test requires C++11
#endif
ARDUINOJSON_ASSERT_INTEGER_TYPE_IS_SUPPORTED(long long)
int main() {
DynamicJsonDocument doc(1024);
doc["dummy"].as<long long>();
}

@ -0,0 +1,12 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
#include <ArduinoJson.h>
// See issue #1498
int main() {
DynamicJsonDocument doc(1024);
doc["dummy"].as<char>();
}

@ -0,0 +1,19 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
#define ARDUINOJSON_USE_LONG_LONG 0
#include <ArduinoJson.h>
#if defined(__SIZEOF_LONG__) && __SIZEOF_LONG__ >= 8
# error This test requires sizeof(long) < 8
#endif
#if !ARDUINOJSON_HAS_LONG_LONG
# error This test requires C++11
#endif
int main() {
DynamicJsonDocument doc(1024);
doc["dummy"] = static_cast<long long>(42);
}

@ -0,0 +1,9 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
#pragma once
#include "api/Print.h"
#include "api/Stream.h"
#include "api/String.h"

@ -0,0 +1,26 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
#pragma once
#include <sstream>
class CustomReader {
std::stringstream _stream;
public:
CustomReader(const char* input) : _stream(input) {}
int read() {
return _stream.get();
}
size_t readBytes(char* buffer, size_t length) {
_stream.read(buffer, static_cast<std::streamsize>(length));
return static_cast<size_t>(_stream.gcount());
}
private:
CustomReader(const CustomReader&);
};

@ -0,0 +1,33 @@
// ArduinoJson - https://arduinojson.org
// Copyright Benoit Blanchon 2014-2021
// MIT License
#pragma once
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
class Print {
public:
virtual ~Print() {}
virtual size_t write(uint8_t) = 0;
virtual size_t write(const uint8_t *buffer, size_t size) = 0;
size_t write(const char *str) {
if (!str)
return 0;
return write(reinterpret_cast<const uint8_t *>(str), strlen(str));
}
size_t write(const char *buffer, size_t size) {
return write(reinterpret_cast<const uint8_t *>(buffer), size);
}
};
class Printable {
public:
virtual ~Printable() {}
virtual size_t printTo(Print &p) const = 0;
};

Some files were not shown because too many files have changed in this diff Show More

Loading…
Cancel
Save