Last fixes for 1.0 - this is pre-1.0.0!

pull/32/head
Holger Wirtz 5 years ago
parent c28a2a3dff
commit 735a9e8ddb
  1. 47
      UI.hpp
  2. 2
      config.h

@ -142,24 +142,6 @@ const uint8_t meter_bar[5][8] = {
{B00001, B00001, B00001, B00001, B00001, B00001, B00001, B00001}
};
/*
const uint8_t block_bar[5][8] = {
{B00000, B10000, B10000, B10000, B10000, B10000, B10000, B00000},
{B00000, B11000, B11000, B11000, B11000, B11000, B11000, B00000},
{B00000, B11100, B11100, B11100, B11100, B11100, B11100, B00000},
{B00000, B11110, B11110, B11110, B11110, B11110, B11110, B00000},
{B00000, B11111, B11111, B11111, B11111, B11111, B11111, B00000}
};
const uint8_t meter_bar[5][8] = {
{B00000, B10000, B10000, B10000, B10000, B10000, B10000, B00000},
{B00000, B01000, B01000, B01000, B01000, B01000, B01000, B00000},
{B00000, B00100, B00100, B00100, B00100, B00100, B00100, B00000},
{B00000, B00010, B00010, B00010, B00010, B00010, B00010, B00000},
{B00000, B00001, B00001, B00001, B00001, B00001, B00001, B00000}
};
*/
const uint8_t special_chars[18][8] = {
{B11111, B11011, B10011, B11011, B11011, B11011, B11011, B11111}, // [0] 1 small invers
{B11111, B11011, B10101, B11101, B11011, B10111, B10001, B11111}, // [1] 2 small invers
@ -3401,7 +3383,7 @@ void UI_handle_OP(uint8_t param)
encoderDir[ENC_R].reset();
lcd.setCursor(0, 0);
lcd.print(F("Operator Enable"));
lcd.print(F("OP Enable"));
lcd.setCursor(0, 1);
for (uint8_t i = 2; i < 8; i++)
lcd.write(i);
@ -4929,8 +4911,17 @@ void UI_func_sysex_send_bank(uint8_t param)
sysex.read(bank_data, 4104);
sysex.close();
lcd.show(1, 0, 16, "Sending...");
lcd.show(1, 0, 16, "Sending Ch");
if (configuration.dexed[selected_instance_id].midi_channel == MIDI_CHANNEL_OMNI)
{
lcd.show(1, 11, 2, "01");
send_sysex_bank(1, bank_data);
}
else
{
lcd.show(1, 11, 2, configuration.dexed[selected_instance_id].midi_channel + 1);
send_sysex_bank(configuration.dexed[selected_instance_id].midi_channel, bank_data);
}
lcd.show(1, 0, 16, "Done.");
bank_number = 0xff;
}
@ -5069,8 +5060,18 @@ void UI_func_sysex_send_voice(uint8_t param)
MicroDexed[selected_instance_id]->decodeVoice(encoded_voice_data, voice_data);
lcd.show(1, 0, 16, "Sending...");
lcd.show(1, 0, 16, "Sending Ch");
if (configuration.dexed[selected_instance_id].midi_channel == MIDI_CHANNEL_OMNI)
{
lcd.show(1, 11, 2, "01");
send_sysex_voice(1, voice_data);
}
else
{
lcd.show(1, 11, 2, configuration.dexed[selected_instance_id].midi_channel + 1);
send_sysex_voice(configuration.dexed[selected_instance_id].midi_channel, voice_data);
}
delay(MESSAGE_WAIT_TIME);
lcd.show(1, 0, 16, "Done.");
sysex.close();
@ -5689,7 +5690,11 @@ void lcd_OP_active_instance_number(uint8_t instance_id, uint8_t op)
}
lcd.createChar(0, instance_num[0]);
#if NUM_DEXED > 1
lcd.createChar(1, instance_num[1]);
#else
lcd.createChar(1, (uint8_t *)special_chars[17]);
#endif
}
void lcd_special_chars(uint8_t mode)

@ -56,7 +56,7 @@
// sed -i.orig 's/^#define USB_MIDI_SYSEX_MAX 290/#define USB_MIDI_SYSEX_MAX 4104/' /usr/local/arduino-teensy-1.8.12/hardware/teensy/avr/cores/teensy3/usb_midi.h
//#define USB_MIDI_SYSEX_MAX 4104
#define VERSION "0.9.9l"
#define VERSION "0.9.9m"
//*************************************************************************************************
//* DEVICE SETTINGS

Loading…
Cancel
Save