Last fixes for 1.0 - this is pre-1.0.0!

UI.hpp

@@ -142,24 +142,6 @@ const uint8_t meter_bar[5][8] = {
   {B00001, B00001, B00001, B00001, B00001, B00001, B00001, B00001}
 };
 
-/*
-  const uint8_t block_bar[5][8] = {
-  {B00000, B10000, B10000, B10000, B10000, B10000, B10000, B00000},
-  {B00000, B11000, B11000, B11000, B11000, B11000, B11000, B00000},
-  {B00000, B11100, B11100, B11100, B11100, B11100, B11100, B00000},
-  {B00000, B11110, B11110, B11110, B11110, B11110, B11110, B00000},
-  {B00000, B11111, B11111, B11111, B11111, B11111, B11111, B00000}
-  };
-
-  const uint8_t meter_bar[5][8] = {
-  {B00000, B10000, B10000, B10000, B10000, B10000, B10000, B00000},
-  {B00000, B01000, B01000, B01000, B01000, B01000, B01000, B00000},
-  {B00000, B00100, B00100, B00100, B00100, B00100, B00100, B00000},
-  {B00000, B00010, B00010, B00010, B00010, B00010, B00010, B00000},
-  {B00000, B00001, B00001, B00001, B00001, B00001, B00001, B00000}
-  };
-*/
-
 const uint8_t special_chars[18][8] = {
   {B11111, B11011, B10011, B11011, B11011, B11011, B11011, B11111}, //  [0] 1 small invers
   {B11111, B11011, B10101, B11101, B11011, B10111, B10001, B11111}, //  [1] 2 small invers
@@ -3401,7 +3383,7 @@ void UI_handle_OP(uint8_t param)
     encoderDir[ENC_R].reset();
 
     lcd.setCursor(0, 0);
-    lcd.print(F("Operator Enable"));
+    lcd.print(F("OP Enable"));
     lcd.setCursor(0, 1);
     for (uint8_t i = 2; i < 8; i++)
       lcd.write(i);
@@ -4929,8 +4911,17 @@ void UI_func_sysex_send_bank(uint8_t param)
           sysex.read(bank_data, 4104);
           sysex.close();
 
-          lcd.show(1, 0, 16, "Sending...");
+          lcd.show(1, 0, 16, "Sending Ch");
-          send_sysex_bank(configuration.dexed[selected_instance_id].midi_channel, bank_data);
+          if (configuration.dexed[selected_instance_id].midi_channel == MIDI_CHANNEL_OMNI)
+          {
+            lcd.show(1, 11, 2, "01");
+            send_sysex_bank(1, bank_data);
+          }
+          else
+          {
+            lcd.show(1, 11, 2, configuration.dexed[selected_instance_id].midi_channel + 1);
+            send_sysex_bank(configuration.dexed[selected_instance_id].midi_channel, bank_data);
+          }
           lcd.show(1, 0, 16, "Done.");
           bank_number = 0xff;
         }
@@ -5069,8 +5060,18 @@ void UI_func_sysex_send_voice(uint8_t param)
 
               MicroDexed[selected_instance_id]->decodeVoice(encoded_voice_data, voice_data);
 
-              lcd.show(1, 0, 16, "Sending...");
+              lcd.show(1, 0, 16, "Sending Ch");
-              send_sysex_voice(configuration.dexed[selected_instance_id].midi_channel, voice_data);
+              if (configuration.dexed[selected_instance_id].midi_channel == MIDI_CHANNEL_OMNI)
+              {
+                lcd.show(1, 11, 2, "01");
+                send_sysex_voice(1, voice_data);
+              }
+              else
+              {
+                lcd.show(1, 11, 2, configuration.dexed[selected_instance_id].midi_channel + 1);
+                send_sysex_voice(configuration.dexed[selected_instance_id].midi_channel, voice_data);
+              }
+              delay(MESSAGE_WAIT_TIME);
               lcd.show(1, 0, 16, "Done.");
               sysex.close();
 
@@ -5689,7 +5690,11 @@ void lcd_OP_active_instance_number(uint8_t instance_id, uint8_t op)
   }
 
   lcd.createChar(0, instance_num[0]);
+#if NUM_DEXED > 1
   lcd.createChar(1, instance_num[1]);
+#else
+  lcd.createChar(1, (uint8_t *)special_chars[17]);
+#endif
 }
 
 void lcd_special_chars(uint8_t mode)

config.h

@@ -56,7 +56,7 @@
 // sed -i.orig 's/^#define USB_MIDI_SYSEX_MAX 290/#define USB_MIDI_SYSEX_MAX 4104/' /usr/local/arduino-teensy-1.8.12/hardware/teensy/avr/cores/teensy3/usb_midi.h
 //#define USB_MIDI_SYSEX_MAX 4104
 
-#define VERSION "0.9.9l"
+#define VERSION "0.9.9m"
 
 //*************************************************************************************************
 //* DEVICE SETTINGS