Fixed volume code.

MicroDexed.ino

@@ -65,7 +65,6 @@ AudioConnection          patchCord5(amp2, 0, i2s1, 1);
 AudioControlSGTL5000     sgtl5000_1;     //xy=1055,398
 // GUItool: end automatically generated code
 
-
 Dexed* dexed = new Dexed(SAMPLE_RATE);
 bool sd_card_available = false;
 uint8_t bank = EEPROM.read(EEPROM_BANK_ADDR);
@@ -133,10 +132,13 @@ void setup()
 
   // start audio card
   AudioMemory(AUDIO_MEM);
-  sgtl5000_1.enable();
-  sgtl5000_1.volume(VOLUME);
   amp1.gain(1.0); // normal audio
   amp2.gain(1.0); // normal audio
+  sgtl5000_1.enable();
+  sgtl5000_1.unmuteHeadphone();
+  sgtl5000_1.autoVolumeDisable(); // turn off AGC
+  sgtl5000_1.volume(1.0,1.0);
+  sgtl5000_1.dacVolume(VOLUME,VOLUME);
 
   // start SD card
   SPI.setMOSI(SDCARD_MOSI_PIN);
@@ -170,7 +172,7 @@ void setup()
   Serial.print(F("AUDIO_BLOCK_SAMPLES="));
   Serial.print(AUDIO_BLOCK_SAMPLES);
   Serial.print(F(" (Time per block="));
-  Serial.print(1000000/(SAMPLE_RATE/AUDIO_BLOCK_SAMPLES));
+  Serial.print(1000000 / (SAMPLE_RATE / AUDIO_BLOCK_SAMPLES));
   Serial.println(F("ms)"));
 
 #ifdef TEST_NOTE
@@ -202,8 +204,8 @@ void setup()
 
 void loop()
 {
-  int16_t* audio_buffer; // pointer to 128 * int16_t (=256 bytes!)
+  int16_t* audio_buffer; // pointer to AUDIO_BLOCK_SAMPLES * int16_t
-  const uint16_t audio_block_time_ms=1000000/(SAMPLE_RATE/AUDIO_BLOCK_SAMPLES);
+  const uint16_t audio_block_time_ms = 1000000 / (SAMPLE_RATE / AUDIO_BLOCK_SAMPLES);
 
   while (42 == 42) // DON'T PANIC!
   {
@@ -395,7 +397,8 @@ bool handle_master_key(uint8_t data)
     num = abs(num);
     if (num <= 10)
     {
-      sgtl5000_1.volume(num * 0.1);
+      //sgtl5000_1.volume(num * 0.1, num * 0.1);
+      sgtl5000_1.dacVolume(num * 0.1, num * 0.1);
 #ifdef DEBUG
       Serial.print(F("Volume changed to: "));
       Serial.println(num * 0.1, DEC);

config.h

@@ -31,7 +31,7 @@
 // Initial values
 #define MIDI_DEVICE Serial1
 #define USE_ONBOARD_USB_HOST 1
-#define VOLUME 0.8
+#define VOLUME 0.5
 #define DEFAULT_MIDI_CHANNEL MIDI_CHANNEL_OMNI
 #define DEFAULT_SYSEXBANK 0
 #define DEFAULT_SYSEXSOUND 0

dexed.cpp

@@ -220,7 +220,8 @@ bool Dexed::processMidiMessage(uint8_t type, uint8_t data1, uint8_t data2)
             controllers.refresh();
             break;
           case 7: // Volume
-            sgtl5000_1.volume(float(value) / 0x7f);
+            //sgtl5000_1.volume(value / 0x7f, value / 0x7f);
+            sgtl5000_1.dacVolume(value / 0x7f, value / 0x7f);
             break;
           case 10: // Pan
             if (value < 64)