Additions for the user manual. Now it's ready and (I hope) only small additions and fixes are necessary.

doc/manuals/MicroDexed-User_Manual/MicroDexed-User_Manual.md

@@ -686,7 +686,7 @@ This is where you can send one voice via MIDI-SYSEX.
 
 <center><img src="images/10_VoiceSend_1.jpg" width="400"/></center>
 
-1. After choosing, push the preset encoder.
+2. After choosing, push the preset encoder.
 
 <center><img src="images/10_VoiceSend_2.jpg" width="400"/></center>
 
@@ -702,23 +702,48 @@ The voice will be sent immediately.
 
 ---
 > __Hint for sending banks via MIDI:__
-> The bank is sent on the configured MIDI channel. If OMNI is configured, then MIDI channel 1 is used for sending.
+> The voice is sent on the configured MIDI channel. If OMNI is configured, then MIDI channel 1 is used for sending.
 ---
 
 <div style="page-break-after: always"></div>
 
 ### System
 
+Everything that belongs to the basic settings and is probably rarely changed can be found in this menu.
+
 #### Stereo/Mono
 
+MD can be operated both in stereo and mono. In addition, the mono signal can also be output on both channels or only on one channel.
+
+Parameters:
+* Stereo/Mono (STEREO/MONO/MONO-R/MONO-L)
+
 #### MIDI Soft THRU
 
+MD has a real MIDI-THRU connection on the TMA Paltine. But if this is not used, it is possible to output all incoming MIDI data via the existing interfaces.
+
+For example, if data arrives via MIDI-DIN it will be output on MIDI-DIN, USB-HOST-MIDI and USB-MIDI (without filtering).
+
+---
+> __Hint on MIDI Soft THRU:__
+> This also works when MIDI data is sent that MD does not process. So you have a simple MIDI media converter (USB-MIDI <-> DIN-MIDI).
+---
+
+Parameters:
+* MIDI Soft THRU (ON/OFF)
+  
 #### EEPROM Reset
 
+Resetting the EEPROM can sometimes be necessary if the internal data has been messed up (by a new firmware). By resetting the EEPROM only the current data is overwritten. All bank/voice data and configurations on the SD card are __not__ affected.
+
 <div style="page-break-after: always"></div>
 
 ### Info
 
+The Info menu gives some information about the used version and the SD card.
+
+<center><img src="images/10_Info_1.jpg" width="400"/></center>
+
 ## Tips and tricks
 
 ### Editing the voices

doc/manuals/MicroDexed-User_Manual/build.sh

@@ -66,3 +66,5 @@ ${LCDIMG} --baseimg Preset_Setting --line1 "MIDI Send Voice" --line2 "%bracket_o
 ${LCDIMG} --baseimg Preset_Push --line1 "MIDI Send Voice" --line2 "%bracket_open%65%bracket_close% CHOIR01" --target images/10_VoiceSend_2.jpg
 ${LCDIMG} --baseimg Preset_Setting --line1 "MIDI Send Voice" --line2 "%bracket_open%06%bracket_close% CH0R 3    A" --target images/10_VoiceSend_3.jpg
 ${LCDIMG} --baseimg Preset_Push --line1 "MIDI Send Voice" --line2 "Sending Ch. 16" --target images/10_VoiceSend_4.jpg
+
+${LCDIMG} --line1 "1.0.0 FX%sign-minus%16" --line2 "SD2  FAT32 29GB" --target images/10_Info_1.jpg