__Note the direction in which the audio card: If the board is like in the picture below, the SD card slot must point to the right.__
__Note the direction in which the Teensy: If the board is like in the picture below, the SD card slot must point to the right.__ Also connect the USB adapter cable so that the thicker black of the female connector is located to the right (like in the picture below).
You need:
You need:
* Teensy audio card (not included in the kit)
* Teensy-3.x (not included in the kit)
* Angled USB micro adapter cable
![](images/120.jpg)
![](images/110.jpg)
<divstyle="page-break-after: always"></div>
<divstyle="page-break-after: always"></div>
#### Insert the Teensy
#### Connect USB-Host (OPTIONAL)
__Note the direction in which the Teensy: If the board is like in the picture below, the SD card slot must point to the right.__ Also connect the USB adapter cable so that the thicker black of the female connector is located to the right (like in the picture below).
Connect the USB-host pins of the Teensy-3.6 to the pin headers on the main PCB. The order is straight through as shown in the picture below.
You need:
You need:
* Teensy-3.x (not included in the kit)
* 5 7cm female/female wires
* Angled USB micro adapter cable
![](images/120.jpg)
![](images/150.jpg)
<divstyle="page-break-after: always"></div>
<divstyle="page-break-after: always"></div>
#### Prepare and insert SD card
#### Insert the audio card
Format the SD card as FAT32 and copy the contents of the directory *addon* from the *MicroDexed* directory to the SD card. You can also install your own SYSEX files (or load them directly onto the MicroDexed later). It is important to keep the directory structure: for each bank there is a directory with the bank number as name.
The SD card can be inserted into the Teensy or the audio card.
__Note the direction in which the audio card: If the board is like in the picture below, the SD card slot must point to the right.__
You need:
You need:
* SD card (not included in the kit)
* Teensy audio card (not included in the kit)
![](images/130.jpg)
![](images/110.jpg)
<divstyle="page-break-after: always"></div>
<divstyle="page-break-after: always"></div>
@ -324,20 +323,22 @@ You need:
* 3 7cm female/female wires for audio-out
* 3 7cm female/female wires for audio-out
* 3 7cm female/female wires for audio-in (__RECOMMENDED__)
* 3 7cm female/female wires for audio-in (__RECOMMENDED__)
![](images/140.jpg)
![](images/145.jpg)
![](images/145.jpg)
![](images/140.jpg)
<divstyle="page-break-after: always"></div>
<divstyle="page-break-after: always"></div>
#### Connect USB-Host (OPTIONAL)
#### Prepare and insert SD card
Connect the USB-host pins of the Teensy-3.6 to the pin headers on the main PCB. The order is straight through as shown in the picture below.
Format the SD card as FAT32 and copy the contents of the directory *addon* from the *MicroDexed* directory to the SD card. You can also install your own SYSEX files (or load them directly onto the MicroDexed later). It is important to keep the directory structure: for each bank there is a directory with the bank number as name.
The SD card can be inserted into the Teensy or the audio card.
You need:
You need:
* 5 7cm female/female wires
* SD card (not included in the kit)
![](images/150.jpg)
![](images/130.jpg)
<divstyle="page-break-after: always"></div>
<divstyle="page-break-after: always"></div>
@ -347,7 +348,7 @@ Connect the pre-soldered encoders to the pin headers on the main PCB. The order