Fixes.

doc/manuals/MicroDexed-Build_Manual/MicroDexed-Build_Manual.md

@@ -276,42 +276,41 @@ You need:
 
 <div style="page-break-after: always"></div>
 
-#### Insert the audio card
+#### Insert the Teensy
 
-__Note the direction in which the audio card: If the board is like in the picture below, the SD card slot must point to the right.__
+__Note the direction in which the Teensy: If the board is like in the picture below, the SD card slot must point to the right.__ Also connect the USB adapter cable so that the thicker black of the female connector is located to the right (like in the picture below).
 
 You need:
 
-* Teensy audio card (not included in the kit)
+* Teensy-3.x (not included in the kit)
+* Angled USB micro adapter cable
+
+![](images/120.jpg)
 
-![](images/110.jpg)
 
 <div style="page-break-after: always"></div>
 
-#### Insert the Teensy
+#### Connect USB-Host (OPTIONAL)
 
-__Note the direction in which the Teensy: If the board is like in the picture below, the SD card slot must point to the right.__ Also connect the USB adapter cable so that the thicker black of the female connector is located to the right (like in the picture below).
+Connect the USB-host pins of the Teensy-3.6 to the pin headers on the main PCB. The order is straight through as shown in the picture below.
 
 You need:
 
-* Teensy-3.x (not included in the kit)
-* Angled USB micro adapter cable
+* 5 7cm female/female wires
 
-![](images/120.jpg)
+![](images/150.jpg)
 
 <div style="page-break-after: always"></div>
 
-#### Prepare and insert SD card
-
-Format the SD card as FAT32 and copy the contents of the directory *addon* from the *MicroDexed* directory to the SD card. You can also install your own SYSEX files (or load them directly onto the MicroDexed later). It is important to keep the directory structure: for each bank there is a directory with the bank number as name.
+#### Insert the audio card
 
-The SD card can be inserted into the Teensy or the audio card.
+__Note the direction in which the audio card: If the board is like in the picture below, the SD card slot must point to the right.__
 
 You need:
 
-* SD card (not included in the kit)
+* Teensy audio card (not included in the kit)
 
-![](images/130.jpg)
+![](images/110.jpg)
 
 <div style="page-break-after: always"></div>
 
@@ -324,20 +323,22 @@ You need:
 * 3 7cm female/female wires for audio-out
 * 3 7cm female/female wires for audio-in (__RECOMMENDED__)
 
-![](images/140.jpg)
 ![](images/145.jpg)
+![](images/140.jpg)
 
 <div style="page-break-after: always"></div>
 
-#### Connect USB-Host (OPTIONAL)
+#### Prepare and insert SD card
 
-Connect the USB-host pins of the Teensy-3.6 to the pin headers on the main PCB. The order is straight through as shown in the picture below.
+Format the SD card as FAT32 and copy the contents of the directory *addon* from the *MicroDexed* directory to the SD card. You can also install your own SYSEX files (or load them directly onto the MicroDexed later). It is important to keep the directory structure: for each bank there is a directory with the bank number as name.
+
+The SD card can be inserted into the Teensy or the audio card.
 
 You need:
 
-* 5 7cm female/female wires
+* SD card (not included in the kit)
 
-![](images/150.jpg)
+![](images/130.jpg)
 
 <div style="page-break-after: always"></div>
 
@@ -347,7 +348,7 @@ Connect the pre-soldered encoders to the pin headers on the main PCB. The order
 
 You need:
 
-* 2 pre-sodlered encoders
+* 2 pre-soldered encoders
 
 ![](images/165.jpg)