|
|
|
@ -5,7 +5,7 @@ |
|
|
|
|
(https://github.com/asb2m10/dexed) for the Teensy-3.5/3.6 with audio shield.
|
|
|
|
|
Dexed ist heavily based on https://github.com/google/music-synthesizer-for-android
|
|
|
|
|
|
|
|
|
|
(c)2018 H. Wirtz <wirtz@parasitstudio.de> |
|
|
|
|
(c)2018,2019 H. Wirtz <wirtz@parasitstudio.de> |
|
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify |
|
|
|
|
it under the terms of the GNU General Public License as published by |
|
|
|
@ -101,8 +101,7 @@ uint8_t bank = 0; |
|
|
|
|
uint8_t max_loaded_banks = 0; |
|
|
|
|
uint8_t voice = 0; |
|
|
|
|
float vol = VOLUME; |
|
|
|
|
float vol_right = 1.0; |
|
|
|
|
float vol_left = 1.0; |
|
|
|
|
float pan = 0.5f; |
|
|
|
|
char bank_name[BANK_NAME_LEN]; |
|
|
|
|
char voice_name[VOICE_NAME_LEN]; |
|
|
|
|
char bank_names[MAX_BANKS][BANK_NAME_LEN]; |
|
|
|
@ -156,9 +155,11 @@ void setup() |
|
|
|
|
|
|
|
|
|
delay(220); |
|
|
|
|
Serial.println(F("MicroDexed based on https://github.com/asb2m10/dexed")); |
|
|
|
|
Serial.println(F("(c)2018 H. Wirtz <wirtz@parasitstudio.de>")); |
|
|
|
|
Serial.println(F("(c)2018,2019 H. Wirtz <wirtz@parasitstudio.de>")); |
|
|
|
|
Serial.println(F("https://github.com/dcoredump/MicroDexed")); |
|
|
|
|
Serial.println(F("<setup start>")); |
|
|
|
|
|
|
|
|
|
//init_eeprom();
|
|
|
|
|
initial_values_from_eeprom(); |
|
|
|
|
|
|
|
|
|
setup_midi_devices(); |
|
|
|
@ -185,7 +186,7 @@ void setup() |
|
|
|
|
Serial.println(F("PT8211 enabled.")); |
|
|
|
|
#endif |
|
|
|
|
|
|
|
|
|
set_volume(vol, vol_left, vol_right); |
|
|
|
|
set_volume(vol, pan); |
|
|
|
|
|
|
|
|
|
// start SD card
|
|
|
|
|
SPI.setMOSI(SDCARD_MOSI_PIN); |
|
|
|
@ -366,6 +367,13 @@ void handleControlChange(byte inChannel, byte inCtrl, byte inValue) |
|
|
|
|
{ |
|
|
|
|
if (checkMidiChannel(inChannel)) |
|
|
|
|
{ |
|
|
|
|
#ifdef DEBUG |
|
|
|
|
Serial.print(F("CC#")); |
|
|
|
|
Serial.print(inCtrl, DEC); |
|
|
|
|
Serial.print(F(":")); |
|
|
|
|
Serial.println(inValue, DEC); |
|
|
|
|
#endif |
|
|
|
|
|
|
|
|
|
switch (inCtrl) { |
|
|
|
|
case 0: |
|
|
|
|
if (inValue < MAX_BANKS) |
|
|
|
@ -388,27 +396,11 @@ void handleControlChange(byte inChannel, byte inCtrl, byte inValue) |
|
|
|
|
break; |
|
|
|
|
case 7: // Volume
|
|
|
|
|
vol = float(inValue) / 0x7f; |
|
|
|
|
set_volume(vol, vol_left, vol_right); |
|
|
|
|
set_volume(vol, pan); |
|
|
|
|
break; |
|
|
|
|
case 10: // Pan
|
|
|
|
|
if (inValue < 64) |
|
|
|
|
{ |
|
|
|
|
vol_left = 1.0; |
|
|
|
|
vol_right = float(inValue) / 0x40; |
|
|
|
|
set_volume(vol, vol_left, vol_right); |
|
|
|
|
} |
|
|
|
|
else if (inValue > 64) |
|
|
|
|
{ |
|
|
|
|
vol_left = float(0x7f - inValue) / 0x40; |
|
|
|
|
vol_right = 1.0; |
|
|
|
|
set_volume(vol, vol_left, vol_right); |
|
|
|
|
} |
|
|
|
|
else |
|
|
|
|
{ |
|
|
|
|
vol_left = 1.0; |
|
|
|
|
vol_right = 1.0; |
|
|
|
|
set_volume(vol, vol_left, vol_right); |
|
|
|
|
} |
|
|
|
|
pan = float(inValue) / 128; |
|
|
|
|
set_volume(vol, pan); |
|
|
|
|
break; |
|
|
|
|
case 32: // BankSelect LSB
|
|
|
|
|
bank = inValue; |
|
|
|
@ -507,6 +499,18 @@ void handleProgramChange(byte inChannel, byte inProgram) |
|
|
|
|
|
|
|
|
|
void handleSystemExclusive(byte *sysex, uint len) |
|
|
|
|
{ |
|
|
|
|
#ifdef DEBUG |
|
|
|
|
Serial.print(F("SYSEX-Data[")); |
|
|
|
|
Serial.print(len, DEC); |
|
|
|
|
Serial.print(F("]")); |
|
|
|
|
for (uint8_t i = 0; i < len; i++) |
|
|
|
|
{ |
|
|
|
|
Serial.print(F(" ")); |
|
|
|
|
Serial.print(sysex[i], DEC); |
|
|
|
|
} |
|
|
|
|
Serial.println(); |
|
|
|
|
#endif |
|
|
|
|
|
|
|
|
|
if (sysex[1] != 0x43) // check for Yamaha sysex
|
|
|
|
|
{ |
|
|
|
|
#ifdef DEBUG |
|
|
|
@ -660,11 +664,10 @@ bool checkMidiChannel(byte inChannel) |
|
|
|
|
return (true); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void set_volume(float v, float vr, float vl) |
|
|
|
|
void set_volume(float v, float p) |
|
|
|
|
{ |
|
|
|
|
vol = v; |
|
|
|
|
vol_right = vr; |
|
|
|
|
vol_left = vl; |
|
|
|
|
pan = p; |
|
|
|
|
|
|
|
|
|
#ifdef DEBUG |
|
|
|
|
uint8_t tmp; |
|
|
|
@ -675,33 +678,30 @@ void set_volume(float v, float vr, float vl) |
|
|
|
|
Serial.print(tmp, DEC); |
|
|
|
|
Serial.print(F("/")); |
|
|
|
|
Serial.print(float(tmp) / UCHAR_MAX, DEC); |
|
|
|
|
Serial.print(F("] VOL_L=")); |
|
|
|
|
Serial.print(vl, DEC); |
|
|
|
|
Serial.print(F("] PAN=")); |
|
|
|
|
Serial.print(F("[")); |
|
|
|
|
tmp = EEPROM.read(EEPROM_OFFSET + EEPROM_VOLUME_LEFT_ADDR); |
|
|
|
|
tmp = EEPROM.read(EEPROM_OFFSET + EEPROM_PAN_ADDR); |
|
|
|
|
Serial.print(tmp, DEC); |
|
|
|
|
Serial.print(F("/")); |
|
|
|
|
Serial.print(float(tmp) / UCHAR_MAX, DEC); |
|
|
|
|
Serial.print(F("] VOL_R=")); |
|
|
|
|
Serial.print(vr, DEC); |
|
|
|
|
Serial.print(F("[")); |
|
|
|
|
tmp = EEPROM.read(EEPROM_OFFSET + EEPROM_VOLUME_RIGHT_ADDR); |
|
|
|
|
Serial.print(tmp, DEC); |
|
|
|
|
Serial.print(F("/")); |
|
|
|
|
Serial.print(float(tmp) / UCHAR_MAX, DEC); |
|
|
|
|
Serial.print(float(tmp) / SCHAR_MAX, DEC); |
|
|
|
|
Serial.println(F("]")); |
|
|
|
|
#endif |
|
|
|
|
|
|
|
|
|
#ifdef TEENSY_AUDIO_BOARD |
|
|
|
|
//sgtl5000_1.dacVolume(vol * vol_left, vol * vol_right);
|
|
|
|
|
sgtl5000_1.dacVolume(pow(vol * vol_left, 0.2), pow(vol * vol_right, 0.2)); |
|
|
|
|
sgtl5000_1.dacVolume(v * sinf(p * PI / 2), v * cosf(p * PI / 2)); |
|
|
|
|
#else |
|
|
|
|
volume_master.gain(pow(vol, 0.2)); |
|
|
|
|
volume_r.gain(pow(vr, 0.2)); |
|
|
|
|
volume_l.gain(pow(vl, 0.2)); |
|
|
|
|
volume_master.gain(v); |
|
|
|
|
volume_r.gain(sinf(p * PI / 2)); |
|
|
|
|
volume_l.gain(cosf(p * PI / 2)); |
|
|
|
|
#endif |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
// https://www.dr-lex.be/info-stuff/volumecontrols.html#table1
|
|
|
|
|
inline float logvol(float x) |
|
|
|
|
{ |
|
|
|
|
return (0.001 * expf(6.908 * x)); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void initial_values_from_eeprom(void) |
|
|
|
|
{ |
|
|
|
|
uint32_t crc_eeprom = read_eeprom_checksum(); |
|
|
|
@ -718,16 +718,17 @@ void initial_values_from_eeprom(void) |
|
|
|
|
#ifdef DEBUG |
|
|
|
|
Serial.print(F(" - mismatch -> initializing EEPROM!")); |
|
|
|
|
#endif |
|
|
|
|
eeprom_write(EEPROM_UPDATE_BANK & EEPROM_UPDATE_VOICE & EEPROM_UPDATE_VOL & EEPROM_UPDATE_VOL_R & EEPROM_UPDATE_VOL_L & EEPROM_UPDATE_MIDICHANNEL); |
|
|
|
|
eeprom_write(EEPROM_UPDATE_BANK + EEPROM_UPDATE_VOICE + EEPROM_UPDATE_VOL + EEPROM_UPDATE_PAN + EEPROM_UPDATE_MIDICHANNEL); |
|
|
|
|
} |
|
|
|
|
else |
|
|
|
|
{ |
|
|
|
|
bank = EEPROM.read(EEPROM_OFFSET + EEPROM_BANK_ADDR); |
|
|
|
|
voice = EEPROM.read(EEPROM_OFFSET + EEPROM_VOICE_ADDR); |
|
|
|
|
vol = float(EEPROM.read(EEPROM_OFFSET + EEPROM_MASTER_VOLUME_ADDR)) / UCHAR_MAX; |
|
|
|
|
vol_right = float(EEPROM.read(EEPROM_OFFSET + EEPROM_VOLUME_RIGHT_ADDR)) / UCHAR_MAX; |
|
|
|
|
vol_left = float(EEPROM.read(EEPROM_OFFSET + EEPROM_VOLUME_LEFT_ADDR)) / UCHAR_MAX; |
|
|
|
|
pan = float(EEPROM.read(EEPROM_OFFSET + EEPROM_PAN_ADDR)) / SCHAR_MAX; |
|
|
|
|
midi_channel = EEPROM.read(EEPROM_OFFSET + EEPROM_MIDICHANNEL_ADDR); |
|
|
|
|
if (midi_channel > 16) |
|
|
|
|
midi_channel = MIDI_CHANNEL_OMNI; |
|
|
|
|
} |
|
|
|
|
#ifdef DEBUG |
|
|
|
|
Serial.println(); |
|
|
|
@ -782,8 +783,8 @@ void eeprom_write(uint8_t status) |
|
|
|
|
if (eeprom_update_status != 0) |
|
|
|
|
autostore = 0; |
|
|
|
|
#ifdef DEBUG |
|
|
|
|
Serial.print(F("Updating EEPROM to state to: ")); |
|
|
|
|
Serial.println(eeprom_update_status); |
|
|
|
|
Serial.print(F("Updating EEPROM state to: ")); |
|
|
|
|
Serial.println(eeprom_update_status, DEC); |
|
|
|
|
#endif |
|
|
|
|
} |
|
|
|
|
|
|
|
|
@ -815,21 +816,13 @@ void eeprom_update(void) |
|
|
|
|
#endif |
|
|
|
|
eeprom_update_status &= ~EEPROM_UPDATE_VOL; |
|
|
|
|
} |
|
|
|
|
else if (eeprom_update_status & EEPROM_UPDATE_VOL_R) |
|
|
|
|
else if (eeprom_update_status & EEPROM_UPDATE_PAN) |
|
|
|
|
{ |
|
|
|
|
EEPROM.update(EEPROM_OFFSET + EEPROM_VOLUME_RIGHT_ADDR, uint8_t(vol_right * UCHAR_MAX)); |
|
|
|
|
EEPROM.update(EEPROM_OFFSET + EEPROM_PAN_ADDR, uint8_t(pan * SCHAR_MAX)); |
|
|
|
|
#ifdef DEBUG |
|
|
|
|
Serial.println(F("Volume right written to EEPROM")); |
|
|
|
|
Serial.println(F("Panorama written to EEPROM")); |
|
|
|
|
#endif |
|
|
|
|
eeprom_update_status &= ~EEPROM_UPDATE_VOL_R; |
|
|
|
|
} |
|
|
|
|
else if (eeprom_update_status & EEPROM_UPDATE_VOL_L) |
|
|
|
|
{ |
|
|
|
|
EEPROM.update(EEPROM_OFFSET + EEPROM_VOLUME_LEFT_ADDR, uint8_t(vol_left * UCHAR_MAX)); |
|
|
|
|
#ifdef DEBUG |
|
|
|
|
Serial.println(F("Volume left written to EEPROM")); |
|
|
|
|
#endif |
|
|
|
|
eeprom_update_status &= ~EEPROM_UPDATE_VOL_L; |
|
|
|
|
eeprom_update_status &= ~EEPROM_UPDATE_PAN; |
|
|
|
|
} |
|
|
|
|
else if (eeprom_update_status & EEPROM_UPDATE_MIDICHANNEL ) |
|
|
|
|
{ |
|
|
|
@ -855,6 +848,14 @@ void eeprom_update(void) |
|
|
|
|
eeprom_update_status |= EEPROM_UPDATE_CHECKSUM; |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void init_eeprom(void) |
|
|
|
|
{ |
|
|
|
|
for (uint8_t i = 0; i < EEPROM_DATA_LENGTH; i++) |
|
|
|
|
{ |
|
|
|
|
EEPROM.update(EEPROM_OFFSET + i, 0); |
|
|
|
|
} |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
#if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC) |
|
|
|
|
void show_cpu_and_mem_usage(void) |
|
|
|
|
{ |
|
|
|
|