You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2.7 KiB
2.7 KiB
DFRobot_AS3935_Lib.py Library for Raspberry pi
This is the sample code for Gravity:Lightning Sensor, SKU: SEN0292.
Table of Contents
Installation
The Lightning Sensor should work with AS3935 (https://github.com/DFRobot/DFRobot_AS3935/tree/master/RaspberryPi/Python)
Run the program:
$> python DFRobot_AS3935.py
Methods
/*
* @brief Init The Lightning Sensor
*
* @param address I2C address(1~3)
* bus I2C bus
*/
DFRobot_AS3935(address, bus);
/*
* @brief Sensor reset
*/
def reset(self);
/*
* @brief Configure sensor
*
* @param capacitance Antenna tuning capcitance (must be integer multiple of 8, 8 - 120 pf)
* location Indoor/outdoor mode selection
* disturber Enable/disable disturber detection
*/
def manualCal(self, capacitance, location, disturber);
/*
* @brief Get mid-range type
*
* @return 0 Unknown src
* 1 Lightning detected
* 2 Disturber
* 3 Noise level too high
*/
def getInterruptSrc(self);
/*
* @brief get lightning distance
*
* @return unit kilometer
*/
def getLightningDistKm(self);
/*
* @brief get lightning energy intensity
*
* @return lightning energy intensity(0-1000)
*/
def getStrikeEnergyRaw(self);
/*
* @brief Sets LCO_FDIV register
*
* @param fdiv Set 0, 1, 2 or 3 for ratios of 16, 32, 64 and 128, respectively
*/
def setLcoFdiv(self,fdiv);
/*
* @brief Set interrupt source
*
* @param irqSelect 0 = NONE, 1 = TRCO, 2 = SRCO, 3 = LCO
*/
def setIrqOutputSource(self, irqSelect);
/*
* @brief Set to the outdoor model
*/
def setOutdoors(self);
/*
* @brief Set to the indoor model
*/
def setIndoors(self);
/*
* @brief Disturber detection enabled
*/
def disturberEn(self);
/*
* @brief Disturber detection disenabled
*/
def disturberDis(self);
/*
* @brief Set the noise level
*
* @param 0~7,More than 7 will use the default value:2
*/
def setNoiseFloorLv1(self, nfSel);
/*
* @brief Get the noise level
*
* @return 0~7
*/
def getNoiseFloorLv1(self);
/*
* @brief Set an anti-interference rating
*
* @param 0~7,More than 7 will use the default value:2
*/
def setWatchdogThreshold(self, wdth);
/*
* @brief read WDTH
*
* @return 0~7
*/
def getWatchdogThreshold(self);
/*
* @brief Modify SREJ (spike rejection)
*
* @param 0~7,More than 7 will use the default value:2
*/
def setSpikeRejection(self, srej);
/*
* @brief read SREJ (spike rejection)
*
* @return 0~7
*/
def getSpikeRejection(self);
Credits
Written by DFRobot_JH, 2018. (Welcome to our website)