From 8edb3a587e0a93683e6f85560ab6024cf3719aac Mon Sep 17 00:00:00 2001 From: Adam Szewczyk Date: Thu, 7 Apr 2022 20:37:57 +0200 Subject: [PATCH] fix renames in raspi lib --- python/raspberrypi/DFRobot_AS3935_Lib.py | 102 +++++++++++------------ 1 file changed, 51 insertions(+), 51 deletions(-) diff --git a/python/raspberrypi/DFRobot_AS3935_Lib.py b/python/raspberrypi/DFRobot_AS3935_Lib.py index 4996991..1bbdcca 100644 --- a/python/raspberrypi/DFRobot_AS3935_Lib.py +++ b/python/raspberrypi/DFRobot_AS3935_Lib.py @@ -51,40 +51,40 @@ class DFRobot_AS3935: def set_tuning_caps(self, capVal): #Assume only numbers divisible by 8 (because that's all the chip supports) if capVal > 120: #cap_value out of range, assume highest capacitance - self.singRegWrite(0x08, 0x0F, 0x0F) #set capacitance bits to maximum + self.sing_reg_write(0x08, 0x0F, 0x0F) #set capacitance bits to maximum else: - self.singRegWrite(0x08, 0x0F, capVal >> 3) #set capacitance bits - self.singRegRead(0x08) + self.sing_reg_write(0x08, 0x0F, capVal >> 3) #set capacitance bits + self.sing_reg_read(0x08) #print('capacitance set to 8x%d'%(self.register[0] & 0x0F)) def power_up(self): #register 0x00, PWD bit: 0 (clears PWD) - self.singRegWrite(0x00, 0x01, 0x00) - self.calRCO() #run RCO cal cmd - self.singRegWrite(0x08, 0x20, 0x20) #set DISP_SRCO to 1 + self.sing_reg_write(0x00, 0x01, 0x00) + self.cal_RCO() #run RCO cal cmd + self.sing_reg_write(0x08, 0x20, 0x20) #set DISP_SRCO to 1 time.sleep(0.002) - self.singRegWrite(0x08, 0x20, 0x00) #set DISP_SRCO to 0 + self.sing_reg_write(0x08, 0x20, 0x00) #set DISP_SRCO to 0 def power_down(self): #register 0x00, PWD bit: 0 (sets PWD) - self.singRegWrite(0x00, 0x01, 0x01) + self.sing_reg_write(0x00, 0x01, 0x01) def cal_RCO(self): - self.writeByte(0x3D, 0x96) + self.write_byte(0x3D, 0x96) time.sleep(0.002) '''! @brief Disturber detection enabled ''' def set_indoors(self): - self.singRegWrite(0x00, 0x3E, 0x24) + self.sing_reg_write(0x00, 0x3E, 0x24) print("set to indoors model") '''! @brief Set to the outdoor model ''' def set_outdoors(self): - self.singRegWrite(0x00, 0x3E, 0x1C) + self.sing_reg_write(0x00, 0x3E, 0x1C) print("set to outdoors model") '''! @@ -92,7 +92,7 @@ class DFRobot_AS3935: ''' def disturber_dis(self): #register 0x03, PWD bit: 5 (sets MASK_DIST) - self.singRegWrite(0x03, 0x20, 0x20) + self.sing_reg_write(0x03, 0x20, 0x20) print("disenable disturber detection") '''! @@ -100,24 +100,24 @@ class DFRobot_AS3935: ''' def disturber_en(self): #register 0x03, PWD bit: 5 (sets MASK_DIST) - self.singRegWrite(0x03, 0x20, 0x00) + self.sing_reg_write(0x03, 0x20, 0x00) print("enable disturber detection") def sing_reg_write(self, regAdd, dataMask, regData): #start by reading original register data (only modifying what we need to) - self.singRegRead(regAdd) + self.sing_reg_read(regAdd) #calculate new register data... 'delete' old targeted data, replace with new data #note: 'dataMask' must be bits targeted for replacement #add'l note: this function does NOT shift values into the proper place... they need to be there already newRegData = (self.register[0] & ~dataMask)|(regData & dataMask) #finally, write the data to the register - self.writeByte(regAdd, newRegData) + self.write_byte(regAdd, newRegData) #print('wrt: %02x'%newRegData) - self.singRegRead(regAdd) + self.sing_reg_read(regAdd) #print('Act: %02x'%self.register[0]) def sing_reg_read(self,regAdd): - self.readData(regAdd) + self.read_data(regAdd) '''! @brief Get mid-range type @@ -132,7 +132,7 @@ class DFRobot_AS3935: #for this function: #0 = unknown src, 1 = lightning detected, 2 = disturber, 3 = Noise level too high time.sleep(0.03) #wait 3ms before reading (min 2ms per pg 22 of datasheet) - self.singRegRead(0x03) #read register, get rid of non-interrupt data + self.sing_reg_read(0x03) #read register, get rid of non-interrupt data intSrc = self.register[0]&0x0F if intSrc == 0x08: return 1 #lightning caused interrupt @@ -147,7 +147,7 @@ class DFRobot_AS3935: @brief Sensor reset ''' def reset(self): - err = self.writeByte(0x3C, 0x96) + err = self.write_byte(0x3C, 0x96) time.sleep(0.002) #wait 2ms to complete return err @@ -156,7 +156,7 @@ class DFRobot_AS3935: @param fdiv Set 0, 1, 2 or 3 for ratios of 16, 32, 64 and 128, respectively ''' def set_lco_fdiv(self,fdiv): - self.singRegWrite(0x03, 0xC0, (fdiv & 0x03) << 6) + self.sing_reg_write(0x03, 0xC0, (fdiv & 0x03) << 6) '''! @brief Set interrupt source @@ -168,20 +168,20 @@ class DFRobot_AS3935: #only one should be set at once, I think #0 = NONE, 1 = TRCO, 2 = SRCO, 3 = LCO if irqSelect == 1: - self.singRegWrite(0x08, 0xE0, 0x20) #set only TRCO bit + self.sing_reg_write(0x08, 0xE0, 0x20) #set only TRCO bit elif irqSelect == 2: - self.singRegWrite(0x08, 0xE0, 0x40) #set only SRCO bit + self.sing_reg_write(0x08, 0xE0, 0x40) #set only SRCO bit elif irqSelect == 3: - self.singRegWrite(0x08, 0xE0, 0x80) #set only SRCO bit + self.sing_reg_write(0x08, 0xE0, 0x80) #set only SRCO bit else: - self.singRegWrite(0x08, 0xE0, 0x00) #clear IRQ pin display bits + self.sing_reg_write(0x08, 0xE0, 0x00) #clear IRQ pin display bits '''! @brief get lightning distance @return unit kilometer ''' def get_lightning_distKm(self): - self.singRegRead(0x07) #read register, get rid of non-distance data + self.sing_reg_read(0x07) #read register, get rid of non-distance data return self.register[0]&0x3F '''! @@ -189,12 +189,12 @@ class DFRobot_AS3935: @return lightning energy intensity(0-1000) ''' def get_strike_energy_raw(self): - self.singRegRead(0x06) #MMSB, shift 8 bits left, make room for MSB + self.sing_reg_read(0x06) #MMSB, shift 8 bits left, make room for MSB nrgyRaw = (self.register[0]&0x1F) << 8 - self.singRegRead(0x05) #read MSB + self.sing_reg_read(0x05) #read MSB nrgyRaw |= self.register[0] nrgyRaw <<= 8 #shift 8 bits left, make room for LSB - self.singRegRead(0x04) #read LSB, add to others + self.sing_reg_read(0x04) #read LSB, add to others nrgyRaw |= self.register[0] return nrgyRaw/16777 @@ -203,23 +203,23 @@ class DFRobot_AS3935: #This function sets min strikes to the closest available number, rounding to the floor, #where necessary, then returns the physical value that was set. Options are 1, 5, 9 or 16 strikes. if minStrk < 5: - self.singRegWrite(0x02, 0x30, 0x00) + self.sing_reg_write(0x02, 0x30, 0x00) return 1 elif minStrk < 9: - self.singRegWrite(0x02, 0x30, 0x10) + self.sing_reg_write(0x02, 0x30, 0x10) return 5 elif minStrk < 16: - self.singRegWrite(0x02, 0x30, 0x20) + self.sing_reg_write(0x02, 0x30, 0x20) return 9 else: - self.singRegWrite(0x02, 0x30, 0x30) + self.sing_reg_write(0x02, 0x30, 0x30) return 16 def clear_statistics(self): #clear is accomplished by toggling CL_STAT bit 'high-low-high' (then set low to move on) - self.singRegWrite(0x02, 0x40, 0x40) #high - self.singRegWrite(0x02, 0x40, 0x00) #low - self.singRegWrite(0x02, 0x40, 0x40) #high + self.sing_reg_write(0x02, 0x40, 0x40) #high + self.sing_reg_write(0x02, 0x40, 0x00) #low + self.sing_reg_write(0x02, 0x40, 0x40) #high '''! @brief Get the noise level @@ -228,7 +228,7 @@ class DFRobot_AS3935: def get_noise_floor_lv1(self): #NF settings addres 0x01, bits 6:4 #default setting of 010 at startup (datasheet, table 9) - self.singRegRead(0x01) #read register 0x01 + self.sing_reg_read(0x01) #read register 0x01 return (self.register[0] & 0x70) >> 4 #should return value from 0-7, see table 16 for info '''! @@ -239,9 +239,9 @@ class DFRobot_AS3935: #NF settings addres 0x01, bits 6:4 #default setting of 010 at startup (datasheet, table 9) if nfSel <= 7: #nfSel within expected range - self.singRegWrite(0x01, 0x70, (nfSel & 0x07) << 4) + self.sing_reg_write(0x01, 0x70, (nfSel & 0x07) << 4) else: #out of range, set to default (power-up value 010) - self.singRegWrite(0x01, 0x70, 0x20) + self.sing_reg_write(0x01, 0x70, 0x20) '''! @brief read WDTH @@ -253,7 +253,7 @@ class DFRobot_AS3935: #WDTH register: add 0x01, bits 3:0 #default value of 0010 #values should only be between 0x00 and 0x0F (0 and 7) - self.singRegRead(0x01) + self.sing_reg_read(0x01) return self.register[0] & 0x0F '''! @@ -266,7 +266,7 @@ class DFRobot_AS3935: #WDTH register: add 0x01, bits 3:0 #default value of 0010 #values should only be between 0x00 and 0x0F (0 and 7) - self.singRegWrite(0x01, 0x0F, wdth & 0x0F) + self.sing_reg_write(0x01, 0x0F, wdth & 0x0F) '''! @brief read SREJ (spike rejection) @@ -279,7 +279,7 @@ class DFRobot_AS3935: #SREJ register: add 0x02, bits 3:0 #default value of 0010 #values should only be between 0x00 and 0x0F (0 and 7) - self.singRegRead(0x02) + self.sing_reg_read(0x02) return self.register[0] & 0x0F '''! @@ -293,26 +293,26 @@ class DFRobot_AS3935: #WDTH register: add 0x02, bits 3:0 #default value of 0010 #values should only be between 0x00 and 0x0F (0 and 7) - self.singRegWrite(0x02, 0x0F, srej & 0x0F) + self.sing_reg_write(0x02, 0x0F, srej & 0x0F) def print_all_regs(self): - self.singRegRead(0x00) + self.sing_reg_read(0x00) print("Reg 0x00: %02x"%self.register[0]) - self.singRegRead(0x01) + self.sing_reg_read(0x01) print("Reg 0x01: %02x"%self.register[0]) - self.singRegRead(0x02) + self.sing_reg_read(0x02) print("Reg 0x02: %02x"%self.register[0]) - self.singRegRead(0x03) + self.sing_reg_read(0x03) print("Reg 0x03: %02x"%self.register[0]) - self.singRegRead(0x04) + self.sing_reg_read(0x04) print("Reg 0x04: %02x"%self.register[0]) - self.singRegRead(0x05) + self.sing_reg_read(0x05) print("Reg 0x05: %02x"%self.register[0]) - self.singRegRead(0x06) + self.sing_reg_read(0x06) print("Reg 0x06: %02x"%self.register[0]) - self.singRegRead(0x07) + self.sing_reg_read(0x07) print("Reg 0x07: %02x"%self.register[0]) - self.singRegRead(0x08) + self.sing_reg_read(0x08) print("Reg 0x08: %02x"%self.register[0])