You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
BA_MicroMDAEPiano/config.h

89 lines
2.6 KiB

/*
MicroMDAEpiano
MicroMDAEpiano is a port of the MDAEpiano sound engine
(http://mda.smartelectronix.com/synths.htm) for the Teensy-3.5/3.6 with audio
shield.
(c)2018 H. Wirtz <wirtz@parasitstudio.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "midinotes.h"
// ATTENTION! For better latency you have to redefine AUDIO_BLOCK_SAMPLES from
// 128 to 64 in <ARDUINO-IDE-DIR>/cores/teensy3/AudioStream.h
// Initial values
#define MIDI_DEVICE Serial1
#define USE_ONBOARD_USB_HOST 1
//#define TEENSY_AUDIO_BOARD 1
#define VOLUME 0.3
#define DEFAULT_MIDI_CHANNEL MIDI_CHANNEL_OMNI
#define AUDIO_MEM 300
#define SAMPLE_RATE 44100
6 years ago
#define REDUCE_LOUDNESS 1
#if !defined(__MK66FX1M0__) // check for Teensy-3.6
#define NVOCIES 11 // No?
#undef USE_ONBOARD_USB_HOST
#else
#define NVOICES 16 // Yes
#endif
// Master key handling (comment for disabling)
#define MASTER_KEY_MIDI MIDI_C7
#define MASTER_NUM1 MIDI_C2
// Debug output
#define SERIAL_SPEED 38400
#define DEBUG 1
#define SHOW_MIDI_EVENT 1
#define SHOW_XRUN 1
#define SHOW_CPU_LOAD_MSEC 5000
// Enable TEST_NOTE for adding code to drop some midi notes for testing without keyboard
//#define TEST_NOTE MIDI_E2
#define TEST_VEL_MIN 60
#define TEST_VEL_MAX 110
// Use these with the Teensy Audio Shield
//#define SDCARD_CS_PIN 10
//#define SDCARD_MOSI_PIN 7
//#define SDCARD_SCK_PIN 14
// Use these with the Teensy 3.5 & 3.6 SD card
#define SDCARD_CS_PIN BUILTIN_SDCARD
#define SDCARD_MOSI_PIN 11 // not actually used
#define SDCARD_SCK_PIN 13 // not actually used
// Encoder with button
#define ENC1_PIN_A 14
#define ENC1_PIN_B 15
#define BUT1_PIN 16
#define INITIAL_ENC1_VALUE 0
// EEPROM address
#define EEPROM_OFFSET 0
#define EEPROM_DATA_LENGTH 5
#define EEPROM_CRC32_ADDR EEPROM.length()-sizeof(uint32_t)
#define EEPROM_BANK_ADDR 0
#define EEPROM_VOICE_ADDR 1
#define EEPROM_MASTER_VOLUME_ADDR 2
#define EEPROM_VOLUME_RIGHT_ADDR 3
#define EEPROM_VOLUME_LEFT_ADDR 4