You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
106 lines
3.7 KiB
106 lines
3.7 KiB
/*************************************************************************
|
|
* This demo uses the BALibrary library to provide enhanced control of
|
|
* the TGA Pro board.
|
|
*
|
|
* The latest copy of the BA Guitar library can be obtained from
|
|
* https://github.com/Blackaddr/BALibrary
|
|
*
|
|
* This demo measures the input noise of the TGA Pro. Make sure nothing is physically plugged
|
|
* into the INPUT jack when you run this program. This allows the switching-input jack to ground
|
|
* the input to zero signal.
|
|
*
|
|
* The test will measure RMS noise and average sample value while toggling the CODEC HPF
|
|
* every few seconds. the CODEC HPF attempts to maximize headroom by modulating it's digital
|
|
* HPF filter offset. This results in near-zero low-frequncy (DC and sub-sonic) content which can
|
|
* be useful for frequency detection but is not appropriate for when sound quality is desired as
|
|
* the modulation of the filter will result in audible artifacts.
|
|
*
|
|
* ALLOW THE TEST TO RUN THROUGH SEVERAL CYCLE of toggling the HPF so the CODEC can calibrate correctly.
|
|
*
|
|
*/
|
|
#include <Wire.h>
|
|
#include <Audio.h>
|
|
#include "BALibrary.h"
|
|
#include "BAEffects.h"
|
|
|
|
using namespace BALibrary;
|
|
using namespace BAEffects;
|
|
|
|
#define MEASURE_CODEC_PERFORMANCE // uncomment this line to measure internal codec performance, comment the line to measure TGA analog input circuitry performance.
|
|
|
|
BAAudioControlWM8731 codecControl;
|
|
AudioInputI2S i2sIn;
|
|
AudioOutputI2S i2sOut;
|
|
AudioEffectRmsMeasure rmsModule;
|
|
|
|
// Audio Connections
|
|
AudioConnection patchInL(i2sIn,0, rmsModule, 0); // route the input to the delay
|
|
AudioConnection patchInR(i2sIn,1, rmsModule, 1); // route the input to the delay
|
|
|
|
AudioConnection patchOutL(rmsModule, 0, i2sOut, 0); // connect the cab filter to the output.
|
|
AudioConnection patchOutR(rmsModule, 0, i2sOut, 1); // connect the cab filter to the output.
|
|
|
|
void setup() {
|
|
TGA_PRO_MKII_REV1(); // Declare the version of the TGA Pro you are using.
|
|
//TGA_PRO_REVB(x);
|
|
//TGA_PRO_REVA(x);
|
|
|
|
delay(5); // wait a few ms to make sure the GTA Pro is fully powered up
|
|
AudioMemory(48);
|
|
|
|
// If the codec was already powered up (due to reboot) power itd own first
|
|
codecControl.disable();
|
|
delay(100);
|
|
codecControl.enable();
|
|
delay(100);
|
|
|
|
#if defined(MEASURE_CODEC_PERFORMANCE)
|
|
// Measure TGA board performance with input unplugged, and 0 gain. Please set
|
|
// the gain switch on the TGA Pro to 0 dB.
|
|
Serial.println("Measuring CODEC internal performance");
|
|
codecControl.setLeftInMute(true); // mute the input signal completely
|
|
codecControl.setRightInMute(true);
|
|
codecControl.setHPFDisable(false); // Start with the HPF enabled
|
|
#else
|
|
// Measure TGA board performance with input unplugged, and 0 gain. Please set
|
|
// the gain switch on the TGA Pro to 0 dB.
|
|
Serial.println("Measuring TGA Pro analog performance");
|
|
codecControl.setLeftInputGain(23); // 23 = 10111 = 0 dB of CODEC analog gain
|
|
codecControl.setRightInputGain(23);
|
|
codecControl.setLeftInMute(false);
|
|
codecControl.setRightInMute(false);
|
|
codecControl.setHPFDisable(false); // Start with the HPF enabled.
|
|
#endif
|
|
|
|
rmsModule.enable();
|
|
rmsModule.bypass(false);
|
|
|
|
codecControl.recalibrateDcOffset();
|
|
|
|
|
|
}
|
|
|
|
unsigned loopCount = 0;
|
|
bool isHpfEnabled = true;
|
|
|
|
void loop() {
|
|
|
|
// The audio flows automatically through the Teensy Audio Library
|
|
|
|
if (loopCount > 100000000) {
|
|
if (isHpfEnabled) {
|
|
Serial.println("Setting HPF disable to true");
|
|
codecControl.setHPFDisable(true);
|
|
|
|
isHpfEnabled = false;
|
|
} else {
|
|
Serial.println("Setting HPF disable to false");
|
|
codecControl.setHPFDisable(false);
|
|
isHpfEnabled = true;
|
|
}
|
|
loopCount = 0;
|
|
}
|
|
|
|
loopCount++;
|
|
|
|
}
|
|
|