BALibrary/examples/Delay/SoundOnSoundDemo/SoundOnSoundDemo.ino

/*************************************************************************
 * This demo uses the BALibrary library to provide enhanced control of
 * the TGA Pro board.
 * 
 * The latest copy of the BA Guitar library can be obtained from
 * https://github.com/Blackaddr/BALibrary
 * 
 * THIS DEMO REQUIRES THE EXTERNAL SRAM MEM0
 * 
 * This demo combines MIDI control with the BAAudioEffectSoundOnSound. You can use
 * the BAMidiTester to control the effect but it's best to use external MIDI footswitch
 * or the Blackaddr Audio Expansion Control Board.
 * 
 * User must set the Arduino IDE USB-Type to "Serial + MIDI" in the Tools menu.
 * 
 * Afters startup, the effect will spend about 5 seconds clearing the audio delay buffer to prevent
 * any startup pops or clicks from propagating.
 * 
 */
#include <Audio.h>
#include <MIDI.h>

#include "BALibrary.h"
#include "BAEffects.h"

/// IMPORTANT /////
// YOU MUST USE TEENSYDUINO 1.41 or greater
// YOU MUST COMPILE THIS DEMO USING Serial + Midi

//#define USE_CAB_FILTER // uncomment this line to add a simple low-pass filter to simulate a cabinet if you are going straight to headphones
#define MIDI_DEBUG

using namespace midi;
MIDI_CREATE_DEFAULT_INSTANCE();

using namespace BAEffects;
using namespace BALibrary;

AudioInputI2S i2sIn;
AudioOutputI2S i2sOut;
BAAudioControlWM8731 codec;

// External SRAM is required for this effect due to the very long
// delays required.
ExternalSramManager externalSram;
ExtMemSlot delaySlot; // Declare an external memory slot.

AudioEffectSOS sos(&delaySlot);

// Add some effects for our soloing channel
AudioEffectDelay         delayModule; // we'll add a little slapback echo
AudioMixer4              gainModule; // This will be used simply to reduce the gain before the reverb
AudioEffectReverb        reverb; // Add a bit of 'verb to our tone
AudioMixer4 mixer;

#if defined(USE_CAB_FILTER)
AudioFilterBiquad cabFilter; // We'll want something to cut out the highs and smooth the tone, just like a guitar cab.
#endif

// Connect the input
AudioConnection inputToSos(i2sIn, 0, sos, 0);
AudioConnection inputToSolo(i2sIn, 0, delayModule, 0);

// Patch cables for the SOLO channel
AudioConnection inputToGain(delayModule, 0, gainModule, 0);
AudioConnection inputToReverb(gainModule, 0, reverb, 0);

// Output Mixer
AudioConnection mixer0input(i2sIn, 0, mixer, 0);  // SOLO Dry Channel
AudioConnection mixer1input(reverb, 0, mixer, 1); // SOLO Wet Channel
AudioConnection mixer2input(sos, 0, mixer, 2); // SOS Channel

#if defined(USE_CAB_FILTER)
AudioConnection inputToCab(mixer, 0, cabFilter, 0);
AudioConnection outputLeft(cabFilter, 0, i2sOut, 0);
AudioConnection outputRight(cabFilter, 0, i2sOut, 1);
#else
AudioConnection outputLeft(mixer, 0, i2sOut, 0);
AudioConnection outputRight(mixer, 0, i2sOut, 1);
#endif

elapsedMillis timer;

void OnControlChange(byte channel, byte control, byte value) {
  sos.processMidi(channel-1, control, value);
  #ifdef MIDI_DEBUG
  Serial.print("Control Change, ch=");
  Serial.print(channel, DEC);
  Serial.print(", control=");
  Serial.print(control, DEC);
  Serial.print(", value=");
  Serial.print(value, DEC);
  Serial.println();
  #endif  
}

void setup() {

  TGA_PRO_MKII_REV1(); // Declare the version of the TGA Pro you are using.
  //TGA_PRO_REVB(x);
  //TGA_PRO_REVA(x);

  SPI_MEM0_4M();
  //SPI_MEM0_1M(); // use this line instead of you have the older 1Mbit memory

  delay(100);
  Serial.begin(57600); // Start the serial port

  // Disable the codec first
  codec.disable();
  delay(100);
  AudioMemory(128);
  delay(5);

  SPI_MEM0_1M(); // Configure the SPI memory size

  // Enable the codec
  Serial.println("Enabling codec...\n");
  codec.enable();
  delay(100);

  // We have to request memory be allocated to our slot.
  externalSram.requestMemory(&delaySlot, BAHardwareConfig.getSpiMemSizeBytes(MemSelect::MEM0), MemSelect::MEM0, true);
  //externalSram.requestMemory(&delaySlot, 50.0f, MemSelect::MEM0, true);

  // Setup MIDI
  MIDI.begin(MIDI_CHANNEL_OMNI);
  MIDI.setHandleControlChange(OnControlChange);
  usbMIDI.setHandleControlChange(OnControlChange);

  // Configure the LED to indicate the gate status
  sos.setGateLedGpio(USR_LED_ID);
  
  // Configure which MIDI CC's will control the effect parameters
  //sos.mapMidiControl(AudioEffectSOS::BYPASS,16);
  sos.mapMidiControl(AudioEffectSOS::GATE_TRIGGER,16);
  sos.mapMidiControl(AudioEffectSOS::CLEAR_FEEDBACK_TRIGGER,17);
  sos.mapMidiControl(AudioEffectSOS::GATE_OPEN_TIME,20);
  sos.mapMidiControl(AudioEffectSOS::GATE_CLOSE_TIME,21);
  sos.mapMidiControl(AudioEffectSOS::VOLUME,22);
  //sos.mapMidiControl(AudioEffectSOS::FEEDBACK,24);

  // Besure to enable the delay. When disabled, audio is is completely blocked
  // to minimize resources to nearly zero.
  sos.enable(); 

  // Set some default values.
  // These can be changed by sending MIDI CC messages over the USB using
  // the BAMidiTester application.
  sos.bypass(false);
  sos.gateOpenTime(3000.0f);
  sos.gateCloseTime(1000.0f);
  sos.feedback(0.9f);

  // Setup effects on the SOLO channel
  gainModule.gain(0, 0.25); // the reverb unit clips easily if the input is too high
  delayModule.delay(0, 50.0f); // 50 ms slapback delay

#if defined(USE_CAB_FILTER)
  // Setup 2-stages of LPF, cutoff 4500 Hz, Q-factor 0.7071 (a 'normal' Q-factor)
  cabFilter.setLowpass(0, 4500, .7071);
  cabFilter.setLowpass(1, 4500, .7071);
#endif

  // Setup the Mixer
  mixer.gain(0, 0.5f); // SOLO Dry gain
  mixer.gain(1, 0.5f); // SOLO Wet gain
  mixer.gain(1, 1.0f); // SOS gain

  delay(1000);
  sos.clear();
  
}

void loop() {
  // usbMIDI.read() needs to be called rapidly from loop().

  if (timer > 1000) {
    timer = 0;
    Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
    Serial.print("% ");
    Serial.print(" SOS: "); Serial.print(sos.processorUsage());
    Serial.println("%");
  }

  MIDI.read();
  usbMIDI.read();

}