Update to support TGA Pro MKII (#14)
* Cleanup and fix issue with DMA transfers on T4 (#13) * Fix issue with max delay on external memory in AudioEffectAnalogDelay * Cleanup of tremolo and analog delay effects * Improved potentiometer getValue() function * Updated and tested examples with T4.0pull/18/head
parent
6f20a52ce7
commit
8bb56adfd3
@ -0,0 +1,54 @@ |
|||||||
|
/*************************************************************************
|
||||||
|
* This demo uses the BALibrary library to provide enhanced control of |
||||||
|
* the TGA Pro board. |
||||||
|
*
|
||||||
|
* The latest copy of the BA Guitar library can be obtained from |
||||||
|
* https://github.com/Blackaddr/BALibrary
|
||||||
|
*
|
||||||
|
* This demo provides a very simple pass-through, clean audio example.
|
||||||
|
* This can be used to double checking everything is hooked up and working correctly. |
||||||
|
* |
||||||
|
* This example also demonstrates the bare minimum code necessary to pass audio |
||||||
|
* through the TGA Pro: |
||||||
|
* - BAAudioControlWM8731 to enable and control the CODEC |
||||||
|
* - AudioInputI2S to receive input audio from the CODEC (it's ADC) |
||||||
|
* - AudioOutputI2S to send output audio to the CODEC (it's DAC) |
||||||
|
*
|
||||||
|
*/ |
||||||
|
#include <Audio.h> |
||||||
|
#include "BALibrary.h" |
||||||
|
|
||||||
|
using namespace BALibrary; // This prevents us having to put BALibrary:: in front of all the Blackaddr Audio components
|
||||||
|
|
||||||
|
BAAudioControlWM8731 codecControl; |
||||||
|
AudioInputI2S i2sIn; |
||||||
|
AudioOutputI2S i2sOut; |
||||||
|
|
||||||
|
// Audio Connections: name(channel)
|
||||||
|
// - Setup a mono signal chain, send the mono signal to both output channels in case you are using headphone
|
||||||
|
// i2sIn(0) --> i2sOut(0)
|
||||||
|
// i2sIn(1) --> i2sOut(1)
|
||||||
|
AudioConnection patch0(i2sIn, 0, i2sOut, 0); // connect the cab filter to the output.
|
||||||
|
AudioConnection patch1(i2sIn, 0, i2sOut, 1); // connect the cab filter to the output.
|
||||||
|
|
||||||
|
void setup() { |
||||||
|
|
||||||
|
TGA_PRO_MKII_REV1(); // Declare the version of the TGA Pro you are using.
|
||||||
|
//TGA_PRO_REVB(x);
|
||||||
|
//TGA_PRO_REVA(x);
|
||||||
|
|
||||||
|
delay(5); // wait a few ms to make sure the GTA Pro is fully powered up
|
||||||
|
AudioMemory(48); // Provide an arbitrarily large number of audio buffers (48 blocks) for the effects (delays use a lot more than others)
|
||||||
|
|
||||||
|
// If the codec was already powered up (due to reboot) power it down first
|
||||||
|
codecControl.disable(); |
||||||
|
delay(100); |
||||||
|
codecControl.enable(); |
||||||
|
delay(100); |
||||||
|
} |
||||||
|
|
||||||
|
void loop() {
|
||||||
|
|
||||||
|
// The audio flows automatically through the Teensy Audio Library
|
||||||
|
|
||||||
|
} |
@ -1,106 +0,0 @@ |
|||||||
/*************************************************************************
|
|
||||||
* This demo uses the BALibrary library to provide enhanced control of |
|
||||||
* the TGA Pro board. |
|
||||||
*
|
|
||||||
* The latest copy of the BA Guitar library can be obtained from |
|
||||||
* https://github.com/Blackaddr/BALibrary
|
|
||||||
*
|
|
||||||
* This demo will provide an audio passthrough, as well as exercise the |
|
||||||
* MIDI interface. |
|
||||||
*
|
|
||||||
*/ |
|
||||||
#include <Wire.h> |
|
||||||
#include <Audio.h> |
|
||||||
#include <MIDI.h> |
|
||||||
#include "BALibrary.h" |
|
||||||
|
|
||||||
MIDI_CREATE_DEFAULT_INSTANCE(); |
|
||||||
using namespace midi; |
|
||||||
using namespace BALibrary; |
|
||||||
|
|
||||||
AudioInputI2S i2sIn; |
|
||||||
AudioOutputI2S i2sOut; |
|
||||||
|
|
||||||
// Audio Thru Connection
|
|
||||||
AudioConnection patch0(i2sIn,0, i2sOut, 0); |
|
||||||
AudioConnection patch1(i2sIn,1, i2sOut, 1); |
|
||||||
|
|
||||||
BAAudioControlWM8731 codecControl; |
|
||||||
BAGpio gpio; // access to User LED
|
|
||||||
|
|
||||||
unsigned long t=0; |
|
||||||
|
|
||||||
void setup() { |
|
||||||
|
|
||||||
MIDI.begin(MIDI_CHANNEL_OMNI); |
|
||||||
Serial.begin(57600); |
|
||||||
delay(5); |
|
||||||
while (!Serial) { yield(); } |
|
||||||
|
|
||||||
// If the codec was already powered up (due to reboot) power itd own first
|
|
||||||
codecControl.disable(); |
|
||||||
delay(100); |
|
||||||
AudioMemory(24); |
|
||||||
|
|
||||||
Serial.println("Enabling codec...\n"); |
|
||||||
codecControl.enable(); |
|
||||||
delay(100); |
|
||||||
|
|
||||||
} |
|
||||||
|
|
||||||
void loop() {
|
|
||||||
|
|
||||||
///////////////////////////////////////////////////////////////////////
|
|
||||||
// MIDI TESTING
|
|
||||||
// Connect a loopback cable between the MIDI IN and MIDI OUT on the
|
|
||||||
// GTA Pro. This test code will periodically send MIDI events which
|
|
||||||
// will loop back and get printed in the Serial Monitor.
|
|
||||||
///////////////////////////////////////////////////////////////////////
|
|
||||||
DataByte note, velocity, channel, d1, d2; |
|
||||||
|
|
||||||
// Send MIDI OUT
|
|
||||||
int cc, val=0xA, channelSend = 1; |
|
||||||
for (cc=32; cc<40; cc++) { |
|
||||||
MIDI.sendControlChange(cc, val, channelSend); val++; channelSend++; |
|
||||||
delay(100); |
|
||||||
MIDI.sendNoteOn(10, 100, channelSend); |
|
||||||
delay(100); |
|
||||||
} |
|
||||||
|
|
||||||
if (MIDI.read()) { // Is there a MIDI message incoming ?
|
|
||||||
MidiType type = MIDI.getType(); |
|
||||||
Serial.println(String("MIDI IS WORKING!!!")); |
|
||||||
switch (type) { |
|
||||||
case NoteOn: |
|
||||||
note = MIDI.getData1(); |
|
||||||
velocity = MIDI.getData2(); |
|
||||||
channel = MIDI.getChannel(); |
|
||||||
if (velocity > 0) { |
|
||||||
Serial.println(String("Note On: ch=") + channel + ", note=" + note + ", velocity=" + velocity); |
|
||||||
} else { |
|
||||||
Serial.println(String("Note Off: ch=") + channel + ", note=" + note); |
|
||||||
} |
|
||||||
break; |
|
||||||
case NoteOff: |
|
||||||
note = MIDI.getData1(); |
|
||||||
velocity = MIDI.getData2(); |
|
||||||
channel = MIDI.getChannel(); |
|
||||||
Serial.println(String("Note Off: ch=") + channel + ", note=" + note + ", velocity=" + velocity); |
|
||||||
break; |
|
||||||
default: |
|
||||||
d1 = MIDI.getData1(); |
|
||||||
d2 = MIDI.getData2(); |
|
||||||
Serial.println(String("Message, type=") + type + ", data = " + d1 + " " + d2); |
|
||||||
} |
|
||||||
t = millis(); |
|
||||||
} |
|
||||||
|
|
||||||
if (millis() - t > 10000) { |
|
||||||
t += 10000; |
|
||||||
Serial.println("(no MIDI activity, check cables)"); |
|
||||||
} |
|
||||||
|
|
||||||
// Toggle the USR LED state
|
|
||||||
gpio.toggleLed(); |
|
||||||
|
|
||||||
} |
|
@ -1,209 +0,0 @@ |
|||||||
/*************************************************************************
|
|
||||||
* This demo uses the BALibrary library to provide enhanced control of |
|
||||||
* the TGA Pro board. |
|
||||||
*
|
|
||||||
* The latest copy of the BA Guitar library can be obtained from |
|
||||||
* https://github.com/Blackaddr/BALibrary
|
|
||||||
*
|
|
||||||
* This demo will provide an audio passthrough, as well as exercise the |
|
||||||
* MIDI interface. |
|
||||||
*
|
|
||||||
* It will also peform a sweep of SPI MEM0. |
|
||||||
*
|
|
||||||
* NOTE: SPI MEM0 can be used by a Teensy 3.1/3.2/3.5/3.6. |
|
||||||
* pins. |
|
||||||
*
|
|
||||||
*/ |
|
||||||
#include <Wire.h> |
|
||||||
#include <Audio.h> |
|
||||||
#include <MIDI.h> |
|
||||||
#include "BALibrary.h" |
|
||||||
|
|
||||||
MIDI_CREATE_DEFAULT_INSTANCE(); |
|
||||||
using namespace midi; |
|
||||||
|
|
||||||
using namespace BALibrary; |
|
||||||
|
|
||||||
AudioInputI2S i2sIn; |
|
||||||
AudioOutputI2S i2sOut; |
|
||||||
|
|
||||||
// Audio Thru Connection
|
|
||||||
AudioConnection patch0(i2sIn,0, i2sOut, 0); |
|
||||||
AudioConnection patch1(i2sIn,1, i2sOut, 1); |
|
||||||
|
|
||||||
BAAudioControlWM8731 codecControl; |
|
||||||
BAGpio gpio; // access to User LED
|
|
||||||
BASpiMemory spiMem0(SpiDeviceId::SPI_DEVICE0); |
|
||||||
|
|
||||||
unsigned long t=0; |
|
||||||
|
|
||||||
// SPI stuff
|
|
||||||
unsigned spiAddress0 = 0; |
|
||||||
uint16_t spiData0 = 0xABCD; |
|
||||||
int spiErrorCount0 = 0; |
|
||||||
|
|
||||||
constexpr int mask0 = 0x5555; |
|
||||||
constexpr int mask1 = 0xaaaa; |
|
||||||
|
|
||||||
int maskPhase = 0; |
|
||||||
int loopPhase = 0; |
|
||||||
|
|
||||||
void setup() { |
|
||||||
|
|
||||||
MIDI.begin(MIDI_CHANNEL_OMNI); |
|
||||||
Serial.begin(57600); |
|
||||||
while (!Serial) { yield(); } |
|
||||||
delay(5); |
|
||||||
|
|
||||||
SPI_MEM0_1M(); // Set the Spi memory size to 1Mbit
|
|
||||||
|
|
||||||
// If the codec was already powered up (due to reboot) power itd own first
|
|
||||||
codecControl.disable(); |
|
||||||
delay(100); |
|
||||||
AudioMemory(24); |
|
||||||
|
|
||||||
Serial.println("Sketch: Enabling codec...\n"); |
|
||||||
codecControl.enable(); |
|
||||||
delay(100); |
|
||||||
|
|
||||||
Serial.println("Enabling SPI"); |
|
||||||
spiMem0.begin(); |
|
||||||
|
|
||||||
} |
|
||||||
|
|
||||||
int calcData(int spiAddress, int loopPhase, int maskPhase) |
|
||||||
{ |
|
||||||
int data; |
|
||||||
|
|
||||||
int phase = ((loopPhase << 1) + maskPhase) & 0x3; |
|
||||||
switch(phase) |
|
||||||
{ |
|
||||||
case 0 : |
|
||||||
data = spiAddress ^ mask0; |
|
||||||
break; |
|
||||||
case 1: |
|
||||||
data = spiAddress ^ mask1; |
|
||||||
break; |
|
||||||
case 2: |
|
||||||
data = ~spiAddress ^ mask0; |
|
||||||
break; |
|
||||||
case 3: |
|
||||||
data = ~spiAddress ^ mask1; |
|
||||||
|
|
||||||
} |
|
||||||
return (data & 0xffff); |
|
||||||
} |
|
||||||
|
|
||||||
void loop() { |
|
||||||
|
|
||||||
//////////////////////////////////////////////////////////////////
|
|
||||||
// Write test data to the SPI Memory 0
|
|
||||||
//////////////////////////////////////////////////////////////////
|
|
||||||
maskPhase = 0; |
|
||||||
for (spiAddress0=0; spiAddress0 <= BAHardwareConfig.getSpiMemMaxAddr(0); spiAddress0=spiAddress0+2) { |
|
||||||
if ((spiAddress0 % 32768) == 0) { |
|
||||||
//Serial.print("Writing to ");
|
|
||||||
//Serial.println(spiAddress0, HEX);
|
|
||||||
} |
|
||||||
|
|
||||||
spiData0 = calcData(spiAddress0, loopPhase, maskPhase); |
|
||||||
spiMem0.write16(spiAddress0, spiData0); |
|
||||||
maskPhase = (maskPhase+1) % 2; |
|
||||||
} |
|
||||||
Serial.println("SPI0 writing DONE!"); |
|
||||||
|
|
||||||
///////////////////////////////////////////////////////////////////
|
|
||||||
// Read back from the SPI Memory 0
|
|
||||||
///////////////////////////////////////////////////////////////////
|
|
||||||
spiErrorCount0 = 0; |
|
||||||
spiAddress0 = 0; |
|
||||||
maskPhase = 0; |
|
||||||
|
|
||||||
for (spiAddress0=0; spiAddress0 <= BAHardwareConfig.getSpiMemMaxAddr(0); spiAddress0=spiAddress0+2) { |
|
||||||
if ((spiAddress0 % 32768) == 0) { |
|
||||||
// Serial.print("Reading ");
|
|
||||||
// Serial.print(spiAddress0, HEX);
|
|
||||||
} |
|
||||||
|
|
||||||
spiData0 = calcData(spiAddress0, loopPhase, maskPhase); |
|
||||||
int data = spiMem0.read16(spiAddress0); |
|
||||||
if (data != spiData0) { |
|
||||||
spiErrorCount0++; |
|
||||||
Serial.println(""); |
|
||||||
Serial.print("ERROR MEM0: (expected) (actual):"); |
|
||||||
Serial.print(spiData0, HEX); Serial.print(":"); |
|
||||||
Serial.print(data, HEX); |
|
||||||
|
|
||||||
delay(100); |
|
||||||
} |
|
||||||
maskPhase = (maskPhase+1) % 2; |
|
||||||
|
|
||||||
if ((spiAddress0 % 32768) == 0) { |
|
||||||
// Serial.print(", data = ");
|
|
||||||
// Serial.println(data, HEX);
|
|
||||||
// Serial.println(String(" loopPhase: ") + loopPhase + String(" maskPhase: ") + maskPhase);
|
|
||||||
} |
|
||||||
|
|
||||||
// Break out of test once the error count reaches 10
|
|
||||||
if (spiErrorCount0 > 10) { break; } |
|
||||||
|
|
||||||
} |
|
||||||
|
|
||||||
if (spiErrorCount0 == 0) { Serial.println("SPI0 TEST PASSED!!!"); } |
|
||||||
|
|
||||||
loopPhase = (loopPhase+1) % 2; |
|
||||||
|
|
||||||
///////////////////////////////////////////////////////////////////////
|
|
||||||
// MIDI TESTING
|
|
||||||
// Connect a loopback cable between the MIDI IN and MIDI OUT on the
|
|
||||||
// GTA Pro. This test code will periodically send MIDI events which
|
|
||||||
// will loop back and get printed in the Serial Monitor.
|
|
||||||
///////////////////////////////////////////////////////////////////////
|
|
||||||
DataByte note, velocity, channel, d1, d2; |
|
||||||
|
|
||||||
// Send MIDI OUT
|
|
||||||
int cc, val=0xA, channelSend = 1; |
|
||||||
for (cc=32; cc<40; cc++) { |
|
||||||
MIDI.sendControlChange(cc, val, channelSend); val++; channelSend++; |
|
||||||
delay(100); |
|
||||||
MIDI.sendNoteOn(10, 100, channelSend); |
|
||||||
delay(100); |
|
||||||
} |
|
||||||
|
|
||||||
if (MIDI.read()) { // Is there a MIDI message incoming ?
|
|
||||||
MidiType type = MIDI.getType(); |
|
||||||
Serial.println(String("MIDI IS WORKING!!!")); |
|
||||||
switch (type) { |
|
||||||
case NoteOn: |
|
||||||
note = MIDI.getData1(); |
|
||||||
velocity = MIDI.getData2(); |
|
||||||
channel = MIDI.getChannel(); |
|
||||||
if (velocity > 0) { |
|
||||||
Serial.println(String("Note On: ch=") + channel + ", note=" + note + ", velocity=" + velocity); |
|
||||||
} else { |
|
||||||
Serial.println(String("Note Off: ch=") + channel + ", note=" + note); |
|
||||||
} |
|
||||||
break; |
|
||||||
case NoteOff: |
|
||||||
note = MIDI.getData1(); |
|
||||||
velocity = MIDI.getData2(); |
|
||||||
channel = MIDI.getChannel(); |
|
||||||
Serial.println(String("Note Off: ch=") + channel + ", note=" + note + ", velocity=" + velocity); |
|
||||||
break; |
|
||||||
default: |
|
||||||
d1 = MIDI.getData1(); |
|
||||||
d2 = MIDI.getData2(); |
|
||||||
Serial.println(String("Message, type=") + type + ", data = " + d1 + " " + d2); |
|
||||||
} |
|
||||||
t = millis(); |
|
||||||
} |
|
||||||
|
|
||||||
if (millis() - t > 10000) { |
|
||||||
t += 10000; |
|
||||||
Serial.println("(no MIDI activity, check cables)"); |
|
||||||
} |
|
||||||
|
|
||||||
// Toggle the USR LED state
|
|
||||||
gpio.toggleLed(); |
|
||||||
|
|
||||||
} |
|
@ -1,271 +0,0 @@ |
|||||||
/*************************************************************************
|
|
||||||
* This demo uses the BALibrary library to provide enhanced control of |
|
||||||
* the TGA Pro board. |
|
||||||
*
|
|
||||||
* The latest copy of the BA Guitar library can be obtained from |
|
||||||
* https://github.com/Blackaddr/BALibrary
|
|
||||||
*
|
|
||||||
* This demo will provide an audio passthrough, as well as exercise the |
|
||||||
* MIDI interface. |
|
||||||
*
|
|
||||||
* It will also peform a sweep of SPI MEM0 and MEM1. |
|
||||||
*
|
|
||||||
* NOTE: SPI MEM0 can be used by a Teensy 3.1/3.2/3.5/3.6. SPI MEM1 |
|
||||||
* can only be used by a Teensy 3.5/3.6 since it is mapped to the extended |
|
||||||
* pins. |
|
||||||
*
|
|
||||||
*/ |
|
||||||
#include <Wire.h> |
|
||||||
#include <Audio.h> |
|
||||||
#include <MIDI.h> |
|
||||||
#include "BALibrary.h" |
|
||||||
|
|
||||||
MIDI_CREATE_DEFAULT_INSTANCE(); |
|
||||||
using namespace midi; |
|
||||||
using namespace BALibrary; |
|
||||||
|
|
||||||
AudioInputI2S i2sIn; |
|
||||||
AudioOutputI2S i2sOut; |
|
||||||
|
|
||||||
// Audio Thru Connection
|
|
||||||
AudioConnection patch0(i2sIn,0, i2sOut, 0); |
|
||||||
AudioConnection patch1(i2sIn,1, i2sOut, 1); |
|
||||||
|
|
||||||
BAAudioControlWM8731 codecControl; |
|
||||||
BAGpio gpio; // access to User LED
|
|
||||||
BASpiMemory spiMem0(SpiDeviceId::SPI_DEVICE0); |
|
||||||
BASpiMemory spiMem1(SpiDeviceId::SPI_DEVICE1); |
|
||||||
|
|
||||||
unsigned long t=0; |
|
||||||
|
|
||||||
// SPI stuff
|
|
||||||
int spiAddress0 = 0; |
|
||||||
uint16_t spiData0 = 0xABCD; |
|
||||||
int spiErrorCount0 = 0; |
|
||||||
|
|
||||||
int spiAddress1 = 0; |
|
||||||
uint16_t spiData1 = 0xDCBA; |
|
||||||
int spiErrorCount1 = 0; |
|
||||||
|
|
||||||
constexpr int mask0 = 0x5555; |
|
||||||
constexpr int mask1 = 0xaaaa; |
|
||||||
|
|
||||||
int maskPhase = 0; |
|
||||||
int loopPhase = 0; |
|
||||||
|
|
||||||
void setup() { |
|
||||||
|
|
||||||
MIDI.begin(MIDI_CHANNEL_OMNI); |
|
||||||
Serial.begin(57600); |
|
||||||
while (!Serial) { yield(); } |
|
||||||
delay(5); |
|
||||||
|
|
||||||
// Set the SPI memory sizes
|
|
||||||
SPI_MEM0_1M(); |
|
||||||
SPI_MEM1_1M(); |
|
||||||
|
|
||||||
// If the codec was already powered up (due to reboot) power itd own first
|
|
||||||
codecControl.disable(); |
|
||||||
delay(100); |
|
||||||
AudioMemory(24); |
|
||||||
|
|
||||||
Serial.println("Sketch: Enabling codec...\n"); |
|
||||||
codecControl.enable(); |
|
||||||
delay(100); |
|
||||||
|
|
||||||
Serial.println("Enabling SPI"); |
|
||||||
spiMem0.begin(); |
|
||||||
spiMem1.begin(); |
|
||||||
|
|
||||||
} |
|
||||||
|
|
||||||
int calcData(int spiAddress, int loopPhase, int maskPhase) |
|
||||||
{ |
|
||||||
int data; |
|
||||||
|
|
||||||
int phase = ((loopPhase << 1) + maskPhase) & 0x3; |
|
||||||
switch(phase) |
|
||||||
{ |
|
||||||
case 0 : |
|
||||||
data = spiAddress ^ mask0; |
|
||||||
break; |
|
||||||
case 1: |
|
||||||
data = spiAddress ^ mask1; |
|
||||||
break; |
|
||||||
case 2: |
|
||||||
data = ~spiAddress ^ mask0; |
|
||||||
break; |
|
||||||
case 3: |
|
||||||
data = ~spiAddress ^ mask1; |
|
||||||
|
|
||||||
} |
|
||||||
return (data & 0xffff); |
|
||||||
} |
|
||||||
|
|
||||||
void loop() { |
|
||||||
|
|
||||||
//////////////////////////////////////////////////////////////////
|
|
||||||
// Write test data to the SPI Memory 0
|
|
||||||
//////////////////////////////////////////////////////////////////
|
|
||||||
maskPhase = 0; |
|
||||||
for (spiAddress0=0; spiAddress0 <= BAHardwareConfig.getSpiMemMaxAddr(0); spiAddress0=spiAddress0+2) { |
|
||||||
if ((spiAddress0 % 32768) == 0) { |
|
||||||
//Serial.print("Writing to ");
|
|
||||||
//Serial.println(spiAddress0, HEX);
|
|
||||||
} |
|
||||||
|
|
||||||
spiData0 = calcData(spiAddress0, loopPhase, maskPhase); |
|
||||||
spiMem0.write16(spiAddress0, spiData0); |
|
||||||
maskPhase = (maskPhase+1) % 2; |
|
||||||
} |
|
||||||
Serial.println("SPI0 writing DONE!"); |
|
||||||
|
|
||||||
///////////////////////////////////////////////////////////////////
|
|
||||||
// Read back from the SPI Memory 0
|
|
||||||
///////////////////////////////////////////////////////////////////
|
|
||||||
spiErrorCount0 = 0; |
|
||||||
spiAddress0 = 0; |
|
||||||
maskPhase = 0; |
|
||||||
|
|
||||||
for (spiAddress0=0; spiAddress0 <= BAHardwareConfig.getSpiMemMaxAddr(0); spiAddress0=spiAddress0+2) { |
|
||||||
if ((spiAddress0 % 32768) == 0) { |
|
||||||
// Serial.print("Reading ");
|
|
||||||
// Serial.print(spiAddress0, HEX);
|
|
||||||
} |
|
||||||
|
|
||||||
spiData0 = calcData(spiAddress0, loopPhase, maskPhase); |
|
||||||
int data = spiMem0.read16(spiAddress0); |
|
||||||
if (data != spiData0) { |
|
||||||
spiErrorCount0++; |
|
||||||
Serial.println(""); |
|
||||||
Serial.print("ERROR MEM0: (expected) (actual):"); |
|
||||||
Serial.print(spiData0, HEX); Serial.print(":"); |
|
||||||
Serial.print(data, HEX); |
|
||||||
|
|
||||||
delay(100); |
|
||||||
} |
|
||||||
maskPhase = (maskPhase+1) % 2; |
|
||||||
|
|
||||||
if ((spiAddress0 % 32768) == 0) { |
|
||||||
// Serial.print(", data = ");
|
|
||||||
// Serial.println(data, HEX);
|
|
||||||
// Serial.println(String(" loopPhase: ") + loopPhase + String(" maskPhase: ") + maskPhase);
|
|
||||||
} |
|
||||||
|
|
||||||
// Break out of test once the error count reaches 10
|
|
||||||
if (spiErrorCount0 > 10) { break; } |
|
||||||
|
|
||||||
} |
|
||||||
|
|
||||||
if (spiErrorCount0 == 0) { Serial.println("SPI0 TEST PASSED!!!"); } |
|
||||||
|
|
||||||
|
|
||||||
//////////////////////////////////////////////////////////////////
|
|
||||||
// Write test data to the SPI Memory 1
|
|
||||||
//////////////////////////////////////////////////////////////////
|
|
||||||
maskPhase = 0; |
|
||||||
for (spiAddress1=0; spiAddress1 <= BAHardwareConfig.getSpiMemMaxAddr(1); spiAddress1+=2) { |
|
||||||
if ((spiAddress1 % 32768) == 0) { |
|
||||||
//Serial.print("Writing to ");
|
|
||||||
//Serial.println(spiAddress1, HEX);
|
|
||||||
} |
|
||||||
|
|
||||||
spiData1 = calcData(spiAddress1, loopPhase, maskPhase); |
|
||||||
spiMem1.write16(spiAddress1, spiData1); |
|
||||||
maskPhase = (maskPhase+1) % 2; |
|
||||||
} |
|
||||||
Serial.println("SPI1 writing DONE!"); |
|
||||||
|
|
||||||
///////////////////////////////////////////////////////////////////
|
|
||||||
// Read back from the SPI Memory 1
|
|
||||||
///////////////////////////////////////////////////////////////////
|
|
||||||
spiErrorCount1 = 0; |
|
||||||
spiAddress1 = 0; |
|
||||||
|
|
||||||
maskPhase = 0; |
|
||||||
for (spiAddress1=0; spiAddress1 <= BAHardwareConfig.getSpiMemMaxAddr(1); spiAddress1+=2) { |
|
||||||
if ((spiAddress1 % 32768) == 0) { |
|
||||||
//Serial.print("Reading ");
|
|
||||||
//Serial.print(spiAddress1, HEX);
|
|
||||||
} |
|
||||||
|
|
||||||
spiData1 = calcData(spiAddress1, loopPhase, maskPhase); |
|
||||||
uint16_t data = spiMem1.read16(spiAddress1); |
|
||||||
if (data != spiData1) { |
|
||||||
spiErrorCount1++; |
|
||||||
Serial.println(""); |
|
||||||
Serial.print("ERROR MEM1: (expected) (actual):"); |
|
||||||
Serial.print(spiData1, HEX); Serial.print(":"); |
|
||||||
Serial.println(data, HEX); |
|
||||||
delay(100); |
|
||||||
} |
|
||||||
maskPhase = (maskPhase+1) % 2; |
|
||||||
|
|
||||||
if ((spiAddress1 % 32768) == 0) { |
|
||||||
//Serial.print(", data = ");
|
|
||||||
//Serial.println(data, HEX);
|
|
||||||
} |
|
||||||
|
|
||||||
// Break out of test once the error count reaches 10
|
|
||||||
if (spiErrorCount1 > 10) { break; } |
|
||||||
|
|
||||||
} |
|
||||||
|
|
||||||
if (spiErrorCount1 == 0) { Serial.println("SPI1 TEST PASSED!!!"); } |
|
||||||
|
|
||||||
loopPhase = (loopPhase+1) % 2; |
|
||||||
|
|
||||||
///////////////////////////////////////////////////////////////////////
|
|
||||||
// MIDI TESTING
|
|
||||||
// Connect a loopback cable between the MIDI IN and MIDI OUT on the
|
|
||||||
// GTA Pro. This test code will periodically send MIDI events which
|
|
||||||
// will loop back and get printed in the Serial Monitor.
|
|
||||||
///////////////////////////////////////////////////////////////////////
|
|
||||||
DataByte note, velocity, channel, d1, d2; |
|
||||||
|
|
||||||
// Send MIDI OUT
|
|
||||||
int cc, val=0xA, channelSend = 1; |
|
||||||
for (cc=32; cc<40; cc++) { |
|
||||||
MIDI.sendControlChange(cc, val, channelSend); val++; channelSend++; |
|
||||||
delay(100); |
|
||||||
MIDI.sendNoteOn(10, 100, channelSend); |
|
||||||
delay(100); |
|
||||||
} |
|
||||||
|
|
||||||
if (MIDI.read()) { // Is there a MIDI message incoming ?
|
|
||||||
MidiType type = MIDI.getType(); |
|
||||||
Serial.println(String("MIDI IS WORKING!!!")); |
|
||||||
switch (type) { |
|
||||||
case NoteOn: |
|
||||||
note = MIDI.getData1(); |
|
||||||
velocity = MIDI.getData2(); |
|
||||||
channel = MIDI.getChannel(); |
|
||||||
if (velocity > 0) { |
|
||||||
Serial.println(String("Note On: ch=") + channel + ", note=" + note + ", velocity=" + velocity); |
|
||||||
} else { |
|
||||||
Serial.println(String("Note Off: ch=") + channel + ", note=" + note); |
|
||||||
} |
|
||||||
break; |
|
||||||
case NoteOff: |
|
||||||
note = MIDI.getData1(); |
|
||||||
velocity = MIDI.getData2(); |
|
||||||
channel = MIDI.getChannel(); |
|
||||||
Serial.println(String("Note Off: ch=") + channel + ", note=" + note + ", velocity=" + velocity); |
|
||||||
break; |
|
||||||
default: |
|
||||||
d1 = MIDI.getData1(); |
|
||||||
d2 = MIDI.getData2(); |
|
||||||
Serial.println(String("Message, type=") + type + ", data = " + d1 + " " + d2); |
|
||||||
} |
|
||||||
t = millis(); |
|
||||||
} |
|
||||||
|
|
||||||
if (millis() - t > 10000) { |
|
||||||
t += 10000; |
|
||||||
Serial.println("(no MIDI activity, check cables)"); |
|
||||||
} |
|
||||||
|
|
||||||
// Toggle the USR LED state
|
|
||||||
gpio.toggleLed(); |
|
||||||
|
|
||||||
} |
|
Loading…
Reference in new issue