MKII

examples/Tests/TGA_PRO_MEM2_EXP/TGA_PRO_MEM2_EXP.ino

@@ -42,9 +42,10 @@
  * 
  */
 
-//#define RUN_MIDI_TEST // Uncomment this line to run the MIDI test.
+#define RUN_MIDI_TEST // Uncomment this line to run the MIDI test.
-//#define RUN_MEMO_TEST // Uncomment this line to run the MEM0 test.
+#define RUN_MEMO_TEST // Uncomment this line to run the MEM0 test.
 //#define RUN_MEM1_TEST // (Teensy 3.5/3/6 only!) Uncomment this line to run the MEM1 test.
+#define RUN_EXP_TEST // Test the Expansion board controls
 
 #include <Audio.h>
 #include "BALibrary.h"
@@ -83,7 +84,7 @@ unsigned loopCounter = 0;
 
 void setup() {
   Serial.begin(57600);
-  while (!Serial) { yield(); }
+  //while (!Serial) { yield(); }
   delay(500);
 
   // Disable the audio codec first
@@ -94,7 +95,8 @@ void setup() {
   codec.setHeadphoneVolume(0.8f); // Set headphone volume
   configPhysicalControls(controls, codec);
 
-  TGA_PRO_EXPAND_REV2(); // Macro to declare expansion board revision
+  TGA_PRO_MKII_REV1();
+  TGA_PRO_EXPAND_REV3(); // Macro to declare expansion board revision
 
   // Run the initial Midi connectivity and SPI memory tests.
 #if defined(RUN_MIDI_TEST)
@@ -102,8 +104,8 @@ void setup() {
 #endif
 
 #if defined(RUN_MEMO_TEST)
-  SPI_MEM0_1M();
+  //SPI_MEM0_1M();
-  //SPI_MEM0_4M();
+  SPI_MEM0_4M();
   spiMem0.begin(); delay(10);
   if (spiTest(&spiMem0, 0)) { Serial.println("SPI0 testing PASSED!");}
 #endif
@@ -115,16 +117,20 @@ void setup() {
   if (spiTest(&spiMem1, 1)) { Serial.println("SPI1 testing PASSED!");}
 #endif
 
+#if defined(RUN_EXP_TEST)
   Serial.println("Now monitoring for input from Expansion Control Board");
+  #endif
 }
 
 void loop() {
-  
+
-  checkPot(0);
+  #if defined(RUN_EXP_TEST)
-  checkPot(1);
+    checkPot(0);
-  checkPot(2);
+    checkPot(1);
-  checkSwitch(0);
+    checkPot(2);
-  checkSwitch(1);
+    checkSwitch(0);
+    checkSwitch(1);
+  #endif
 
   delay(20);
   loopCounter++;

src/BAHardware.h

@@ -34,9 +34,13 @@ namespace BALibrary {
 
 // In your Arudino .ino file, use #defines for your TGA Pro revision and options
 // to correctly configure your hardware
-#define TGA_PRO_REVA(x)        BALibrary::BAHardwareConfig.m_tgaBoard = TgaBoard::REV_A ///< Macro for specifying REV A of the TGA Pro
+#define TGA_PRO_REVA(x)        BALibrary::BAHardwareConfig.m_tgaBoard = TgaBoard::REV_A     ///< Macro for specifying REV A of the TGA Pro
-#define TGA_PRO_REVB(x)        BALibrary::BAHardwareConfig.m_tgaBoard = TgaBoard::REV_B ///< Macro for specifying REV B of the TGA Pro
+#define TGA_PRO_REVB(x)        BALibrary::BAHardwareConfig.m_tgaBoard = TgaBoard::REV_B     ///< Macro for specifying REV B of the TGA Pro
+#define TGA_PRO_MKII_REV1(x)   BALibrary::BAHardwareConfig.m_tgaBoard = TgaBoard::MKII_REV1 ///< Macro for specifying REV B of the TGA Pro
+
 #define TGA_PRO_EXPAND_REV2(x) BALibrary::BAHardwareConfig.m_expansionBoard = ExpansionBoard::REV_2 ///< Macro for specifying REV 2 of the Expansion Board
+#define TGA_PRO_EXPAND_REV3(x) BALibrary::BAHardwareConfig.m_expansionBoard = ExpansionBoard::REV_3 ///< Macro for specifying REV 2 of the Expansion Board
+
 #define SPI_MEM0_1M(x)         BALibrary::BAHardwareConfig.m_spiMem0 = SPI_MEMORY_1M ///< Macro for specifying MEM0 is 1Mbit
 #define SPI_MEM0_4M(x)         BALibrary::BAHardwareConfig.m_spiMem0 = SPI_MEMORY_4M ///< Macro for specifying MEM1 is 4Mbit
 #define SPI_MEM1_1M(x)         BALibrary::BAHardwareConfig.m_spiMem1 = SPI_MEMORY_1M ///< Macro for specifying MEM0 is 1Mbit
@@ -48,14 +52,16 @@ namespace BALibrary {
 /// enum to specify the TGA Board revision
 enum class TgaBoard : unsigned {
     REV_A = 0, ///< indicates using REV A of the TGA Pro
-    REV_B      ///< indicates using REV B of the TGA Pro
+    REV_B,     ///< indicates using REV B of the TGA Pro
+    MKII_REV1  ///< indicates using MKII, Rev 1 of the TGA Pro
 };
 
 /// enum to specify the TGA Pro Expansion Board revision
 enum class ExpansionBoard : unsigned {
     NO_EXPANSION = 0, ///< default, indicates no expansion board is present
     REV_1,            ///< indicates using REV 1 of the Expansion Board
-    REV_2             ///< indicates using REV 2 of the Expansion Board
+    REV_2,            ///< indicates using REV 2 of the Expansion Board
+    REV_3             ///< indicates using REV 3 of the Expansion Board (MKII Series)
 };
 
 /// enum to specify SPI memory dize
@@ -209,7 +215,12 @@ enum class GPIO : uint8_t {
  * Teensy 4.0 Hardware Settings
  *****************************************************************************/
 #elif defined(__IMXRT1062__) // T4.0
-constexpr uint8_t USR_LED_ID = 2; ///< Teensy IO number for the user LED.
+
+// TGA PRO MKI
+//constexpr uint8_t USR_LED_ID = 2; ///< Teensy IO number for the user LED.
+
+// TGA PRO MKI
+constexpr uint8_t USR_LED_ID = 6; ///< Teensy IO number for the user LED.
 
 // SPI0 pinouts
 constexpr uint8_t SPI0_SCK_PIN = 13;
@@ -300,10 +311,18 @@ constexpr unsigned BA_EXPAND_NUM_ENC  = 0;
 constexpr uint8_t BA_EXPAND_POT1_PIN = A0; // 14_A0_TX3_SPDIFOUT
 constexpr uint8_t BA_EXPAND_POT2_PIN = A1; // 15_A1_RX3_SPDIFIN
 constexpr uint8_t BA_EXPAND_POT3_PIN = A2; // 16_A2_RX4_SCL1
-constexpr uint8_t BA_EXPAND_SW1_PIN  = 3;  // 3_LRCLK2
+
-constexpr uint8_t BA_EXPAND_SW2_PIN  = 4;  // 4_BCLK2
+//// REV B
-constexpr uint8_t BA_EXPAND_LED1_PIN = 5;  // 5_IN2
+//constexpr uint8_t BA_EXPAND_SW1_PIN  = 3;  // 3_LRCLK2
-constexpr uint8_t BA_EXPAND_LED2_PIN = 6;  // 6_OUT1D
+//constexpr uint8_t BA_EXPAND_SW2_PIN  = 4;  // 4_BCLK2
+//constexpr uint8_t BA_EXPAND_LED1_PIN = 5;  // 5_IN2
+//constexpr uint8_t BA_EXPAND_LED2_PIN = 6;  // 6_OUT1D
+
+// MKII REV1
+constexpr uint8_t BA_EXPAND_SW1_PIN  = 2;  // 2_OUT2
+constexpr uint8_t BA_EXPAND_SW2_PIN  = 3;  // 3_LRCLK2
+constexpr uint8_t BA_EXPAND_LED1_PIN = 4;  // 4_BLCK2
+constexpr uint8_t BA_EXPAND_LED2_PIN = 5;  // 5_IN2
 
 #else