Fixed a bug in the SPI memory library for accessing MEM1. Also added some more demos, including support for BAAudioEffectExternalDelay
parent
ece11f5bea
commit
80bb07abdf
@ -0,0 +1,175 @@ |
|||||||
|
/*************************************************************************
|
||||||
|
* This demo uses the BAGuitar library to provide enhanced control of |
||||||
|
* the TGA Pro board. |
||||||
|
*
|
||||||
|
* The latest copy of the BA Guitar library can be obtained from |
||||||
|
* https://github.com/Blackaddr/BAGuitar
|
||||||
|
*
|
||||||
|
* This demo will provide an audio passthrough, as well as exercise the |
||||||
|
* MIDI interface. |
||||||
|
*
|
||||||
|
* It will also perform a sweeo of the SPI MEM0 external RAM. |
||||||
|
*
|
||||||
|
*/ |
||||||
|
#include <Wire.h> |
||||||
|
#include <Audio.h> |
||||||
|
#include <MIDI.h> |
||||||
|
#include "BAGuitar.h" |
||||||
|
|
||||||
|
MIDI_CREATE_DEFAULT_INSTANCE(); |
||||||
|
using namespace midi; |
||||||
|
|
||||||
|
|
||||||
|
using namespace BAGuitar; |
||||||
|
|
||||||
|
AudioInputI2S i2sIn; |
||||||
|
AudioOutputI2S i2sOut; |
||||||
|
|
||||||
|
// Audio Thru Connection
|
||||||
|
AudioConnection patch0(i2sIn,0, i2sOut, 0); |
||||||
|
AudioConnection patch1(i2sIn,1, i2sOut, 1); |
||||||
|
|
||||||
|
BAAudioControlWM8731 codecControl; |
||||||
|
BAGpio gpio; // access to User LED
|
||||||
|
BASpiMemory spiMem0(SpiDeviceId::SPI_DEVICE0); |
||||||
|
BASpiMemory spiMem1(SpiDeviceId::SPI_DEVICE1); |
||||||
|
|
||||||
|
unsigned long t=0; |
||||||
|
|
||||||
|
// SPI stuff
|
||||||
|
int spiAddress0 = 0; |
||||||
|
int spiData0 = 0xff; |
||||||
|
int spiErrorCount0 = 0; |
||||||
|
int spiAddress1 = 0; |
||||||
|
int spiData1 = 0xff; |
||||||
|
int spiErrorCount1 = 0; |
||||||
|
|
||||||
|
|
||||||
|
void setup() { |
||||||
|
|
||||||
|
MIDI.begin(MIDI_CHANNEL_OMNI); |
||||||
|
Serial.begin(57600); |
||||||
|
delay(5); |
||||||
|
|
||||||
|
// If the codec was already powered up (due to reboot) power itd own first
|
||||||
|
codecControl.disable(); |
||||||
|
delay(100); |
||||||
|
AudioMemory(24); |
||||||
|
|
||||||
|
Serial.println("Enabling codec...\n"); |
||||||
|
codecControl.enable(); |
||||||
|
delay(100); |
||||||
|
|
||||||
|
} |
||||||
|
|
||||||
|
void loop() {
|
||||||
|
|
||||||
|
//////////////////////////////////////////////////////////////////
|
||||||
|
// Write test data to the SPI Memory 0
|
||||||
|
//////////////////////////////////////////////////////////////////
|
||||||
|
for (spiAddress0=0; spiAddress0 <= SPI_MAX_ADDR; spiAddress0++) { |
||||||
|
if ((spiAddress0 % 32768) == 0) { |
||||||
|
//Serial.print("Writing to ");
|
||||||
|
//Serial.println(spiAddress0, HEX);
|
||||||
|
} |
||||||
|
|
||||||
|
//mem0Write(spiAddress0, spiData0);
|
||||||
|
spiMem0.write(spiAddress0, spiData0); |
||||||
|
spiData0 = (spiData0-1) & 0xff; |
||||||
|
} |
||||||
|
Serial.println("SPI0 writing DONE!"); |
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////
|
||||||
|
// Read back from the SPI Memory 0
|
||||||
|
///////////////////////////////////////////////////////////////////
|
||||||
|
spiErrorCount0 = 0; |
||||||
|
spiAddress0 = 0; |
||||||
|
spiData0 = 0xff; |
||||||
|
|
||||||
|
for (spiAddress0=0; spiAddress0 <= SPI_MAX_ADDR; spiAddress0++) { |
||||||
|
if ((spiAddress0 % 32768) == 0) { |
||||||
|
//Serial.print("Reading ");
|
||||||
|
//Serial.print(spiAddress0, HEX);
|
||||||
|
} |
||||||
|
|
||||||
|
//int data = mem0Read(spiAddress0);
|
||||||
|
int data = spiMem0.read(spiAddress0); |
||||||
|
if (data != spiData0) { |
||||||
|
spiErrorCount0++; |
||||||
|
Serial.println(""); |
||||||
|
Serial.print("ERROR MEM0: (expected) (actual):"); |
||||||
|
Serial.print(spiData0, HEX); Serial.print(":"); |
||||||
|
Serial.println(data, HEX); |
||||||
|
delay(100); |
||||||
|
} |
||||||
|
|
||||||
|
if ((spiAddress0 % 32768) == 0) { |
||||||
|
//Serial.print(", data = ");
|
||||||
|
//Serial.println(data, HEX);
|
||||||
|
} |
||||||
|
|
||||||
|
spiData0 = (spiData0-1) & 0xff; |
||||||
|
|
||||||
|
// Break out of test once the error count reaches 10
|
||||||
|
if (spiErrorCount0 > 10) { break; } |
||||||
|
|
||||||
|
} |
||||||
|
|
||||||
|
if (spiErrorCount0 == 0) { Serial.println("SPI0 TEST PASSED!!!"); } |
||||||
|
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////
|
||||||
|
// MIDI TESTING
|
||||||
|
// Connect a loopback cable between the MIDI IN and MIDI OUT on the
|
||||||
|
// GTA Pro. This test code will periodically send MIDI events which
|
||||||
|
// will loop back and get printed in the Serial Monitor.
|
||||||
|
///////////////////////////////////////////////////////////////////////
|
||||||
|
DataByte note, velocity, channel, d1, d2; |
||||||
|
|
||||||
|
// Send MIDI OUT
|
||||||
|
int cc, val=0xA, channelSend = 1; |
||||||
|
for (cc=32; cc<40; cc++) { |
||||||
|
MIDI.sendControlChange(cc, val, channelSend); val++; channelSend++; |
||||||
|
delay(100); |
||||||
|
MIDI.sendNoteOn(10, 100, channelSend); |
||||||
|
delay(100); |
||||||
|
} |
||||||
|
|
||||||
|
if (MIDI.read()) { // Is there a MIDI message incoming ?
|
||||||
|
MidiType type = MIDI.getType(); |
||||||
|
Serial.println(String("MIDI IS WORKING!!!")); |
||||||
|
switch (type) { |
||||||
|
case NoteOn: |
||||||
|
note = MIDI.getData1(); |
||||||
|
velocity = MIDI.getData2(); |
||||||
|
channel = MIDI.getChannel(); |
||||||
|
if (velocity > 0) { |
||||||
|
Serial.println(String("Note On: ch=") + channel + ", note=" + note + ", velocity=" + velocity); |
||||||
|
} else { |
||||||
|
Serial.println(String("Note Off: ch=") + channel + ", note=" + note); |
||||||
|
} |
||||||
|
break; |
||||||
|
case NoteOff: |
||||||
|
note = MIDI.getData1(); |
||||||
|
velocity = MIDI.getData2(); |
||||||
|
channel = MIDI.getChannel(); |
||||||
|
Serial.println(String("Note Off: ch=") + channel + ", note=" + note + ", velocity=" + velocity); |
||||||
|
break; |
||||||
|
default: |
||||||
|
d1 = MIDI.getData1(); |
||||||
|
d2 = MIDI.getData2(); |
||||||
|
Serial.println(String("Message, type=") + type + ", data = " + d1 + " " + d2); |
||||||
|
} |
||||||
|
t = millis(); |
||||||
|
} |
||||||
|
|
||||||
|
if (millis() - t > 10000) { |
||||||
|
t += 10000; |
||||||
|
Serial.println("(no MIDI activity, check cables)"); |
||||||
|
} |
||||||
|
|
||||||
|
// Toggle the USR LED state
|
||||||
|
gpio.toggleLed(); |
||||||
|
|
||||||
|
} |
||||||
|
|
@ -0,0 +1,232 @@ |
|||||||
|
/*************************************************************************
|
||||||
|
* This demo uses the BAGuitar library to provide enhanced control of |
||||||
|
* the TGA Pro board. |
||||||
|
*
|
||||||
|
* The latest copy of the BA Guitar library can be obtained from |
||||||
|
* https://github.com/Blackaddr/BAGuitar
|
||||||
|
*
|
||||||
|
* This demo will provide an audio passthrough, as well as exercise the |
||||||
|
* MIDI interface. |
||||||
|
*
|
||||||
|
* It will also peform a sweep of SPI MEM0 and MEM1. |
||||||
|
*
|
||||||
|
* NOTE: SPI MEM0 can be used by a Teensy 3.1/3.2/3.5/3.6. SPI MEM1 |
||||||
|
* can only be used by a Teensy 3.5/3.6 since it is mapped to the extended |
||||||
|
* pins. |
||||||
|
*
|
||||||
|
*/ |
||||||
|
#include <Wire.h> |
||||||
|
#include <Audio.h> |
||||||
|
#include <MIDI.h> |
||||||
|
#include "BAGuitar.h" |
||||||
|
|
||||||
|
MIDI_CREATE_DEFAULT_INSTANCE(); |
||||||
|
using namespace midi; |
||||||
|
|
||||||
|
using namespace BAGuitar; |
||||||
|
|
||||||
|
AudioInputI2S i2sIn; |
||||||
|
AudioOutputI2S i2sOut; |
||||||
|
|
||||||
|
// Audio Thru Connection
|
||||||
|
AudioConnection patch0(i2sIn,0, i2sOut, 0); |
||||||
|
AudioConnection patch1(i2sIn,1, i2sOut, 1); |
||||||
|
|
||||||
|
BAAudioControlWM8731 codecControl; |
||||||
|
BAGpio gpio; // access to User LED
|
||||||
|
BASpiMemory spiMem0(SpiDeviceId::SPI_DEVICE0); |
||||||
|
BASpiMemory spiMem1(SpiDeviceId::SPI_DEVICE1); |
||||||
|
|
||||||
|
unsigned long t=0; |
||||||
|
|
||||||
|
// SPI stuff
|
||||||
|
int spiAddress0 = 0; |
||||||
|
int spiData0 = 0xff; |
||||||
|
int spiErrorCount0 = 0; |
||||||
|
int spiAddress1 = 0; |
||||||
|
int spiData1 = 0xff; |
||||||
|
int spiErrorCount1 = 0; |
||||||
|
|
||||||
|
|
||||||
|
void setup() { |
||||||
|
|
||||||
|
MIDI.begin(MIDI_CHANNEL_OMNI); |
||||||
|
Serial.begin(57600); |
||||||
|
delay(5); |
||||||
|
|
||||||
|
// If the codec was already powered up (due to reboot) power itd own first
|
||||||
|
codecControl.disable(); |
||||||
|
delay(100); |
||||||
|
AudioMemory(24); |
||||||
|
|
||||||
|
Serial.println("Enabling codec...\n"); |
||||||
|
codecControl.enable(); |
||||||
|
delay(100); |
||||||
|
|
||||||
|
} |
||||||
|
|
||||||
|
void loop() {
|
||||||
|
|
||||||
|
//////////////////////////////////////////////////////////////////
|
||||||
|
// Write test data to the SPI Memory 0
|
||||||
|
//////////////////////////////////////////////////////////////////
|
||||||
|
for (spiAddress0=0; spiAddress0 <= SPI_MAX_ADDR; spiAddress0++) { |
||||||
|
if ((spiAddress0 % 32768) == 0) { |
||||||
|
//Serial.print("Writing to ");
|
||||||
|
//Serial.println(spiAddress0, HEX);
|
||||||
|
} |
||||||
|
|
||||||
|
//mem0Write(spiAddress0, spiData0);
|
||||||
|
spiMem0.write(spiAddress0, spiData0); |
||||||
|
spiData0 = (spiData0-1) & 0xff; |
||||||
|
} |
||||||
|
Serial.println("SPI0 writing DONE!"); |
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////
|
||||||
|
// Read back from the SPI Memory 0
|
||||||
|
///////////////////////////////////////////////////////////////////
|
||||||
|
spiErrorCount0 = 0; |
||||||
|
spiAddress0 = 0; |
||||||
|
spiData0 = 0xff; |
||||||
|
|
||||||
|
for (spiAddress0=0; spiAddress0 <= SPI_MAX_ADDR; spiAddress0++) { |
||||||
|
if ((spiAddress0 % 32768) == 0) { |
||||||
|
//Serial.print("Reading ");
|
||||||
|
//Serial.print(spiAddress0, HEX);
|
||||||
|
} |
||||||
|
|
||||||
|
//int data = mem0Read(spiAddress0);
|
||||||
|
int data = spiMem0.read(spiAddress0); |
||||||
|
if (data != spiData0) { |
||||||
|
spiErrorCount0++; |
||||||
|
Serial.println(""); |
||||||
|
Serial.print("ERROR MEM0: (expected) (actual):"); |
||||||
|
Serial.print(spiData0, HEX); Serial.print(":"); |
||||||
|
Serial.println(data, HEX); |
||||||
|
delay(100); |
||||||
|
} |
||||||
|
|
||||||
|
if ((spiAddress0 % 32768) == 0) { |
||||||
|
//Serial.print(", data = ");
|
||||||
|
//Serial.println(data, HEX);
|
||||||
|
} |
||||||
|
|
||||||
|
spiData0 = (spiData0-1) & 0xff; |
||||||
|
|
||||||
|
// Break out of test once the error count reaches 10
|
||||||
|
if (spiErrorCount0 > 10) { break; } |
||||||
|
|
||||||
|
} |
||||||
|
|
||||||
|
if (spiErrorCount0 == 0) { Serial.println("SPI0 TEST PASSED!!!"); } |
||||||
|
|
||||||
|
|
||||||
|
//////////////////////////////////////////////////////////////////
|
||||||
|
// Write test data to the SPI Memory 1
|
||||||
|
//////////////////////////////////////////////////////////////////
|
||||||
|
for (spiAddress1=0; spiAddress1 <= SPI_MAX_ADDR; spiAddress1++) { |
||||||
|
if ((spiAddress1 % 32768) == 0) { |
||||||
|
//Serial.print("Writing to ");
|
||||||
|
//Serial.println(spiAddress1, HEX);
|
||||||
|
} |
||||||
|
|
||||||
|
//mem0Write(spiAddress1, spiData1);
|
||||||
|
spiMem1.write(spiAddress1, spiData1); |
||||||
|
spiData1 = (spiData1-1) & 0xff; |
||||||
|
} |
||||||
|
Serial.println("SPI1 writing DONE!"); |
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////
|
||||||
|
// Read back from the SPI Memory 1
|
||||||
|
///////////////////////////////////////////////////////////////////
|
||||||
|
spiErrorCount1 = 0; |
||||||
|
spiAddress1 = 0; |
||||||
|
spiData1 = 0xff; |
||||||
|
|
||||||
|
for (spiAddress1=0; spiAddress1 <= SPI_MAX_ADDR; spiAddress1++) { |
||||||
|
if ((spiAddress1 % 32768) == 0) { |
||||||
|
//Serial.print("Reading ");
|
||||||
|
//Serial.print(spiAddress1, HEX);
|
||||||
|
} |
||||||
|
|
||||||
|
int data = spiMem1.read(spiAddress1); |
||||||
|
if (data != spiData1) { |
||||||
|
spiErrorCount1++; |
||||||
|
Serial.println(""); |
||||||
|
Serial.print("ERROR MEM1: (expected) (actual):"); |
||||||
|
Serial.print(spiData1, HEX); Serial.print(":"); |
||||||
|
Serial.println(data, HEX); |
||||||
|
delay(100); |
||||||
|
} |
||||||
|
|
||||||
|
if ((spiAddress1 % 32768) == 0) { |
||||||
|
//Serial.print(", data = ");
|
||||||
|
//Serial.println(data, HEX);
|
||||||
|
} |
||||||
|
|
||||||
|
spiData1 = (spiData1-1) & 0xff; |
||||||
|
|
||||||
|
// Break out of test once the error count reaches 10
|
||||||
|
if (spiErrorCount1 > 10) { break; } |
||||||
|
|
||||||
|
} |
||||||
|
|
||||||
|
if (spiErrorCount1 == 0) { Serial.println("SPI1 TEST PASSED!!!"); } |
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////
|
||||||
|
// MIDI TESTING
|
||||||
|
// Connect a loopback cable between the MIDI IN and MIDI OUT on the
|
||||||
|
// GTA Pro. This test code will periodically send MIDI events which
|
||||||
|
// will loop back and get printed in the Serial Monitor.
|
||||||
|
///////////////////////////////////////////////////////////////////////
|
||||||
|
DataByte note, velocity, channel, d1, d2; |
||||||
|
|
||||||
|
// Send MIDI OUT
|
||||||
|
int cc, val=0xA, channelSend = 1; |
||||||
|
for (cc=32; cc<40; cc++) { |
||||||
|
MIDI.sendControlChange(cc, val, channelSend); val++; channelSend++; |
||||||
|
delay(100); |
||||||
|
MIDI.sendNoteOn(10, 100, channelSend); |
||||||
|
delay(100); |
||||||
|
} |
||||||
|
|
||||||
|
if (MIDI.read()) { // Is there a MIDI message incoming ?
|
||||||
|
MidiType type = MIDI.getType(); |
||||||
|
Serial.println(String("MIDI IS WORKING!!!")); |
||||||
|
switch (type) { |
||||||
|
case NoteOn: |
||||||
|
note = MIDI.getData1(); |
||||||
|
velocity = MIDI.getData2(); |
||||||
|
channel = MIDI.getChannel(); |
||||||
|
if (velocity > 0) { |
||||||
|
Serial.println(String("Note On: ch=") + channel + ", note=" + note + ", velocity=" + velocity); |
||||||
|
} else { |
||||||
|
Serial.println(String("Note Off: ch=") + channel + ", note=" + note); |
||||||
|
} |
||||||
|
break; |
||||||
|
case NoteOff: |
||||||
|
note = MIDI.getData1(); |
||||||
|
velocity = MIDI.getData2(); |
||||||
|
channel = MIDI.getChannel(); |
||||||
|
Serial.println(String("Note Off: ch=") + channel + ", note=" + note + ", velocity=" + velocity); |
||||||
|
break; |
||||||
|
default: |
||||||
|
d1 = MIDI.getData1(); |
||||||
|
d2 = MIDI.getData2(); |
||||||
|
Serial.println(String("Message, type=") + type + ", data = " + d1 + " " + d2); |
||||||
|
} |
||||||
|
t = millis(); |
||||||
|
} |
||||||
|
|
||||||
|
if (millis() - t > 10000) { |
||||||
|
t += 10000; |
||||||
|
Serial.println("(no MIDI activity, check cables)"); |
||||||
|
} |
||||||
|
|
||||||
|
// Toggle the USR LED state
|
||||||
|
gpio.toggleLed(); |
||||||
|
|
||||||
|
} |
||||||
|
|
@ -0,0 +1,68 @@ |
|||||||
|
/*************************************************************************
|
||||||
|
* This demo uses the BAGuitar library to provide enhanced control of |
||||||
|
* the TGA Pro board. |
||||||
|
*
|
||||||
|
* The latest copy of the BA Guitar library can be obtained from |
||||||
|
* https://github.com/Blackaddr/BAGuitar
|
||||||
|
*
|
||||||
|
* This demo demonstrates how to override the default AudioEffectDelayExternal |
||||||
|
* in the Teensy Library with the one in the BAGuitar library. This is necessary |
||||||
|
* because the SPI pins in AudioEffectDelayExternal are hard-coded and not the |
||||||
|
* same at the TGA Pro. |
||||||
|
*
|
||||||
|
* Simply replace AudioEffectDelayExternal with BAAudioEffectDelayExternal |
||||||
|
* and it should work the same as the default Audio library. |
||||||
|
*
|
||||||
|
* This demo mixes the original guitar signal with one delayed by 1.45 ms |
||||||
|
* the the external SRAM MEM0 on the TGA Pro |
||||||
|
*
|
||||||
|
*/ |
||||||
|
#include <Wire.h> |
||||||
|
//#include <Audio.h>
|
||||||
|
#include <MIDI.h> |
||||||
|
#include <SPI.h> |
||||||
|
#include "BAGuitar.h" |
||||||
|
|
||||||
|
using namespace BAGuitar; |
||||||
|
|
||||||
|
AudioInputI2S i2sIn; |
||||||
|
AudioOutputI2S i2sOut; |
||||||
|
|
||||||
|
BAAudioControlWM8731 codecControl; |
||||||
|
BAAudioEffectDelayExternal longDelay; |
||||||
|
AudioMixer4 delayMixer; |
||||||
|
|
||||||
|
// Audio Connections
|
||||||
|
AudioConnection fromInput(i2sIn,0, longDelay, 0); |
||||||
|
AudioConnection fromDelayL(longDelay, 0, delayMixer, 0); |
||||||
|
AudioConnection dry(i2sIn, 1, delayMixer, 1); |
||||||
|
AudioConnection outputLeft(delayMixer, 0, i2sOut, 0); |
||||||
|
AudioConnection outputRight(delayMixer, 0, i2sOut, 1); |
||||||
|
|
||||||
|
|
||||||
|
void setup() { |
||||||
|
|
||||||
|
Serial.begin(57600); |
||||||
|
delay(1000); |
||||||
|
|
||||||
|
// If the codec was already powered up (due to reboot) power itd own first
|
||||||
|
codecControl.disable(); |
||||||
|
delay(100); |
||||||
|
AudioMemory(128); |
||||||
|
|
||||||
|
Serial.println("Enabling codec...\n"); |
||||||
|
codecControl.enable(); |
||||||
|
delay(1000); |
||||||
|
|
||||||
|
longDelay.delay(0, 1450.0f); |
||||||
|
delayMixer.gain(0, 1.0f); |
||||||
|
delayMixer.gain(1, 1.0f); |
||||||
|
|
||||||
|
} |
||||||
|
|
||||||
|
void loop() { |
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
} |
||||||
|
|
@ -0,0 +1,75 @@ |
|||||||
|
/*************************************************************************
|
||||||
|
* This demo uses the BAGuitar library to provide enhanced control of |
||||||
|
* the TGA Pro board. |
||||||
|
*
|
||||||
|
* The latest copy of the BA Guitar library can be obtained from |
||||||
|
* https://github.com/Blackaddr/BAGuitar
|
||||||
|
*
|
||||||
|
* This demo provides an example guitar tone consisting of some slap-back delay, |
||||||
|
* followed by a reverb and a low-pass cabinet filter. |
||||||
|
*
|
||||||
|
*/ |
||||||
|
#include <Wire.h> |
||||||
|
#include <Audio.h> |
||||||
|
#include <MIDI.h> |
||||||
|
#include "BAGuitar.h" |
||||||
|
|
||||||
|
using namespace BAGuitar; |
||||||
|
|
||||||
|
BAAudioControlWM8731 codecControl; |
||||||
|
|
||||||
|
AudioInputI2S i2sIn; |
||||||
|
AudioOutputI2S i2sOut; |
||||||
|
|
||||||
|
AudioMixer4 gainModule; // This will be used simply to reduce the gain before the reverb
|
||||||
|
AudioEffectDelay delayModule; // we'll add a little slapback echo
|
||||||
|
AudioEffectReverb reverb; // Add a bit of 'verb to our tone
|
||||||
|
AudioMixer4 mixer; // Used to mix the original dry with the wet (effects) path.
|
||||||
|
AudioFilterBiquad cabFilter; // We'll want something to cut out the highs and smooth the tone, just like a guitar cab.
|
||||||
|
|
||||||
|
|
||||||
|
// Audio Connections
|
||||||
|
AudioConnection patchIn(i2sIn,0, delayModule, 0); // route the input to the delay
|
||||||
|
|
||||||
|
AudioConnection patch2(delayModule,0, gainModule, 0); // send the delay to the gain module
|
||||||
|
AudioConnection patch2b(gainModule, 0, reverb, 0); // then to the reverb
|
||||||
|
|
||||||
|
|
||||||
|
AudioConnection patch1(i2sIn,1, mixer,0); // mixer input 0 is our original dry signal
|
||||||
|
AudioConnection patch3(reverb, 0, mixer, 1); // mixer input 1 is our wet
|
||||||
|
|
||||||
|
AudioConnection patch4(mixer, 0, cabFilter, 0); // mixer outpt to the cabinet filter
|
||||||
|
|
||||||
|
|
||||||
|
AudioConnection patch5(cabFilter, 0, i2sOut, 0); // connect the cab filter to the output.
|
||||||
|
|
||||||
|
void setup() { |
||||||
|
|
||||||
|
delay(5); // wait a few ms to make sure the GTA Pro is fully powered up
|
||||||
|
AudioMemory(48); |
||||||
|
|
||||||
|
// If the codec was already powered up (due to reboot) power itd own first
|
||||||
|
codecControl.disable(); |
||||||
|
delay(100); |
||||||
|
codecControl.enable(); |
||||||
|
delay(100); |
||||||
|
|
||||||
|
// Configure our effects
|
||||||
|
delayModule.delay(0, 50.0f); // 50 ms slapback delay
|
||||||
|
gainModule.gain(0, 0.25); // the reverb unit clips easily if the input is too high
|
||||||
|
mixer.gain(0, 1.0f); // unity gain on the dry
|
||||||
|
mixer.gain(1, 1.0f); // unity gain on the wet
|
||||||
|
|
||||||
|
// Setup 2-stages of LPF, cutoff 4500 Hz, Q-factor 0.7071 (a 'normal' Q-factor)
|
||||||
|
cabFilter.setLowpass(0, 4500, .7071); |
||||||
|
cabFilter.setLowpass(1, 4500, .7071); |
||||||
|
|
||||||
|
|
||||||
|
} |
||||||
|
|
||||||
|
void loop() {
|
||||||
|
|
||||||
|
// The audio flows automatically through the Teensy Audio Library
|
||||||
|
|
||||||
|
} |
||||||
|
|
@ -0,0 +1,322 @@ |
|||||||
|
/*
|
||||||
|
* BAAudioControlWM8731.h |
||||||
|
* |
||||||
|
* Created on: November 1, 2017 |
||||||
|
* Author: slascos |
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version.* |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "BAAudioEffectDelayExternal.h" |
||||||
|
|
||||||
|
namespace BAGuitar { |
||||||
|
|
||||||
|
/* Audio Library for Teensy 3.X
|
||||||
|
* Copyright (c) 2014, Paul Stoffregen, paul@pjrc.com |
||||||
|
* |
||||||
|
* Development of this audio library was funded by PJRC.COM, LLC by sales of |
||||||
|
* Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop |
||||||
|
* open source software by purchasing Teensy or other PJRC products. |
||||||
|
* |
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy |
||||||
|
* of this software and associated documentation files (the "Software"), to deal |
||||||
|
* in the Software without restriction, including without limitation the rights |
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
||||||
|
* copies of the Software, and to permit persons to whom the Software is |
||||||
|
* furnished to do so, subject to the following conditions: |
||||||
|
* |
||||||
|
* The above copyright notice, development funding notice, and this permission |
||||||
|
* notice shall be included in all copies or substantial portions of the Software. |
||||||
|
* |
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
||||||
|
* THE SOFTWARE. |
||||||
|
*/ |
||||||
|
|
||||||
|
//#include "effect_delay_ext.h"
|
||||||
|
|
||||||
|
//#define INTERNAL_TEST
|
||||||
|
|
||||||
|
// While 20 MHz (Teensy actually uses 16 MHz in most cases) and even 24 MHz
|
||||||
|
// have worked well in testing at room temperature with 3.3V power, to fully
|
||||||
|
// meet all the worst case timing specs, the SPI clock low time would need
|
||||||
|
// to be 40ns (12.5 MHz clock) for the single chip case and 51ns (9.8 MHz
|
||||||
|
// clock) for the 6-chip memoryboard with 74LCX126 buffers.
|
||||||
|
//
|
||||||
|
// Timing analysis and info is here:
|
||||||
|
// https://forum.pjrc.com/threads/29276-Limits-of-delay-effect-in-audio-library?p=97506&viewfull=1#post97506
|
||||||
|
#define SPISETTING SPISettings(20000000, MSBFIRST, SPI_MODE0) |
||||||
|
|
||||||
|
// Use these with the audio adaptor board (should be adjustable by the user...)
|
||||||
|
//#define SPIRAM_MOSI_PIN 7
|
||||||
|
//#define SPIRAM_MISO_PIN 12
|
||||||
|
//#define SPIRAM_SCK_PIN 14
|
||||||
|
//
|
||||||
|
//#define SPIRAM_CS_PIN 6
|
||||||
|
|
||||||
|
// Use with TGA Pro
|
||||||
|
#define SPIRAM_MOSI_PIN 7 |
||||||
|
#define SPIRAM_MISO_PIN 8 |
||||||
|
#define SPIRAM_SCK_PIN 14 |
||||||
|
#define SPIRAM_CS_PIN 15 |
||||||
|
|
||||||
|
#define MEMBOARD_CS0_PIN 2 |
||||||
|
#define MEMBOARD_CS1_PIN 3 |
||||||
|
#define MEMBOARD_CS2_PIN 4 |
||||||
|
|
||||||
|
void BAAudioEffectDelayExternal::update(void) |
||||||
|
{ |
||||||
|
audio_block_t *block; |
||||||
|
uint32_t n, channel, read_offset; |
||||||
|
|
||||||
|
// grab incoming data and put it into the memory
|
||||||
|
block = receiveReadOnly(); |
||||||
|
if (memory_type >= BA_AUDIO_MEMORY_UNDEFINED) { |
||||||
|
// ignore input and do nothing if undefined memory type
|
||||||
|
release(block); |
||||||
|
return; |
||||||
|
} |
||||||
|
if (block) { |
||||||
|
if (head_offset + AUDIO_BLOCK_SAMPLES <= memory_length) { |
||||||
|
// a single write is enough
|
||||||
|
write(head_offset, AUDIO_BLOCK_SAMPLES, block->data); |
||||||
|
head_offset += AUDIO_BLOCK_SAMPLES; |
||||||
|
} else { |
||||||
|
// write wraps across end-of-memory
|
||||||
|
n = memory_length - head_offset; |
||||||
|
write(head_offset, n, block->data); |
||||||
|
head_offset = AUDIO_BLOCK_SAMPLES - n; |
||||||
|
write(0, head_offset, block->data + n); |
||||||
|
} |
||||||
|
release(block); |
||||||
|
} else { |
||||||
|
// if no input, store zeros, so later playback will
|
||||||
|
// not be random garbage previously stored in memory
|
||||||
|
if (head_offset + AUDIO_BLOCK_SAMPLES <= memory_length) { |
||||||
|
zero(head_offset, AUDIO_BLOCK_SAMPLES); |
||||||
|
head_offset += AUDIO_BLOCK_SAMPLES; |
||||||
|
} else { |
||||||
|
n = memory_length - head_offset; |
||||||
|
zero(head_offset, n); |
||||||
|
head_offset = AUDIO_BLOCK_SAMPLES - n; |
||||||
|
zero(0, head_offset); |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
// transmit the delayed outputs
|
||||||
|
for (channel = 0; channel < 8; channel++) { |
||||||
|
if (!(activemask & (1<<channel))) continue; |
||||||
|
block = allocate(); |
||||||
|
if (!block) continue; |
||||||
|
// compute the delayed location where we read
|
||||||
|
if (delay_length[channel] <= head_offset) { |
||||||
|
read_offset = head_offset - delay_length[channel]; |
||||||
|
} else { |
||||||
|
read_offset = memory_length + head_offset - delay_length[channel]; |
||||||
|
} |
||||||
|
if (read_offset + AUDIO_BLOCK_SAMPLES <= memory_length) { |
||||||
|
// a single read will do it
|
||||||
|
read(read_offset, AUDIO_BLOCK_SAMPLES, block->data); |
||||||
|
} else { |
||||||
|
// read wraps across end-of-memory
|
||||||
|
n = memory_length - read_offset; |
||||||
|
read(read_offset, n, block->data); |
||||||
|
read(0, AUDIO_BLOCK_SAMPLES - n, block->data + n); |
||||||
|
} |
||||||
|
transmit(block, channel); |
||||||
|
release(block); |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
uint32_t BAAudioEffectDelayExternal::allocated[2] = {0, 0}; |
||||||
|
|
||||||
|
void BAAudioEffectDelayExternal::initialize(BAAudioEffectDelayMemoryType_t type, uint32_t samples) |
||||||
|
{ |
||||||
|
uint32_t memsize, avail; |
||||||
|
|
||||||
|
activemask = 0; |
||||||
|
head_offset = 0; |
||||||
|
memory_type = type; |
||||||
|
|
||||||
|
SPI.setMOSI(SPIRAM_MOSI_PIN); |
||||||
|
SPI.setMISO(SPIRAM_MISO_PIN); |
||||||
|
SPI.setSCK(SPIRAM_SCK_PIN); |
||||||
|
|
||||||
|
SPI.begin();
|
||||||
|
|
||||||
|
if (type == BA_AUDIO_MEMORY_23LC1024) { |
||||||
|
#ifdef INTERNAL_TEST |
||||||
|
memsize = 8000; |
||||||
|
#else |
||||||
|
memsize = 65536; |
||||||
|
#endif |
||||||
|
pinMode(SPIRAM_CS_PIN, OUTPUT); |
||||||
|
digitalWriteFast(SPIRAM_CS_PIN, HIGH); |
||||||
|
} else if (type == BA_AUDIO_MEMORY_MEMORYBOARD) { |
||||||
|
memsize = 393216; |
||||||
|
pinMode(MEMBOARD_CS0_PIN, OUTPUT); |
||||||
|
pinMode(MEMBOARD_CS1_PIN, OUTPUT); |
||||||
|
pinMode(MEMBOARD_CS2_PIN, OUTPUT); |
||||||
|
digitalWriteFast(MEMBOARD_CS0_PIN, LOW); |
||||||
|
digitalWriteFast(MEMBOARD_CS1_PIN, LOW); |
||||||
|
digitalWriteFast(MEMBOARD_CS2_PIN, LOW);
|
||||||
|
} else if (type == BA_AUDIO_MEMORY_CY15B104) { |
||||||
|
#ifdef INTERNAL_TEST |
||||||
|
memsize = 8000; |
||||||
|
#else |
||||||
|
memsize = 262144; |
||||||
|
#endif |
||||||
|
pinMode(SPIRAM_CS_PIN, OUTPUT); |
||||||
|
digitalWriteFast(SPIRAM_CS_PIN, HIGH); |
||||||
|
|
||||||
|
} else { |
||||||
|
return; |
||||||
|
} |
||||||
|
avail = memsize - allocated[type]; |
||||||
|
if (avail < AUDIO_BLOCK_SAMPLES*2+1) { |
||||||
|
memory_type = BA_AUDIO_MEMORY_UNDEFINED; |
||||||
|
return; |
||||||
|
} |
||||||
|
if (samples > avail) samples = avail; |
||||||
|
memory_begin = allocated[type]; |
||||||
|
allocated[type] += samples; |
||||||
|
memory_length = samples; |
||||||
|
|
||||||
|
zero(0, memory_length); |
||||||
|
} |
||||||
|
|
||||||
|
|
||||||
|
#ifdef INTERNAL_TEST |
||||||
|
static int16_t testmem[8000]; // testing only
|
||||||
|
#endif |
||||||
|
|
||||||
|
void BAAudioEffectDelayExternal::read(uint32_t offset, uint32_t count, int16_t *data) |
||||||
|
{ |
||||||
|
uint32_t addr = memory_begin + offset; |
||||||
|
|
||||||
|
#ifdef INTERNAL_TEST |
||||||
|
while (count) { *data++ = testmem[addr++]; count--; } // testing only
|
||||||
|
#else |
||||||
|
if (memory_type == BA_AUDIO_MEMORY_23LC1024 || |
||||||
|
memory_type == BA_AUDIO_MEMORY_CY15B104) { |
||||||
|
addr *= 2; |
||||||
|
SPI.beginTransaction(SPISETTING); |
||||||
|
digitalWriteFast(SPIRAM_CS_PIN, LOW); |
||||||
|
SPI.transfer16((0x03 << 8) | (addr >> 16)); |
||||||
|
SPI.transfer16(addr & 0xFFFF); |
||||||
|
while (count) { |
||||||
|
*data++ = (int16_t)(SPI.transfer16(0)); |
||||||
|
count--; |
||||||
|
} |
||||||
|
digitalWriteFast(SPIRAM_CS_PIN, HIGH); |
||||||
|
SPI.endTransaction(); |
||||||
|
} else if (memory_type == BA_AUDIO_MEMORY_MEMORYBOARD) { |
||||||
|
SPI.beginTransaction(SPISETTING); |
||||||
|
while (count) { |
||||||
|
uint32_t chip = (addr >> 16) + 1; |
||||||
|
digitalWriteFast(MEMBOARD_CS0_PIN, chip & 1); |
||||||
|
digitalWriteFast(MEMBOARD_CS1_PIN, chip & 2); |
||||||
|
digitalWriteFast(MEMBOARD_CS2_PIN, chip & 4); |
||||||
|
uint32_t chipaddr = (addr & 0xFFFF) << 1; |
||||||
|
SPI.transfer16((0x03 << 8) | (chipaddr >> 16)); |
||||||
|
SPI.transfer16(chipaddr & 0xFFFF); |
||||||
|
uint32_t num = 0x10000 - (addr & 0xFFFF); |
||||||
|
if (num > count) num = count; |
||||||
|
count -= num; |
||||||
|
addr += num; |
||||||
|
do { |
||||||
|
*data++ = (int16_t)(SPI.transfer16(0)); |
||||||
|
} while (--num > 0); |
||||||
|
} |
||||||
|
digitalWriteFast(MEMBOARD_CS0_PIN, LOW); |
||||||
|
digitalWriteFast(MEMBOARD_CS1_PIN, LOW); |
||||||
|
digitalWriteFast(MEMBOARD_CS2_PIN, LOW); |
||||||
|
SPI.endTransaction(); |
||||||
|
} |
||||||
|
#endif |
||||||
|
} |
||||||
|
|
||||||
|
void BAAudioEffectDelayExternal::write(uint32_t offset, uint32_t count, const int16_t *data) |
||||||
|
{ |
||||||
|
uint32_t addr = memory_begin + offset; |
||||||
|
|
||||||
|
#ifdef INTERNAL_TEST |
||||||
|
while (count) { testmem[addr++] = *data++; count--; } // testing only
|
||||||
|
#else |
||||||
|
if (memory_type == BA_AUDIO_MEMORY_23LC1024) { |
||||||
|
addr *= 2; |
||||||
|
SPI.beginTransaction(SPISETTING); |
||||||
|
digitalWriteFast(SPIRAM_CS_PIN, LOW); |
||||||
|
SPI.transfer16((0x02 << 8) | (addr >> 16)); |
||||||
|
SPI.transfer16(addr & 0xFFFF); |
||||||
|
while (count) { |
||||||
|
int16_t w = 0; |
||||||
|
if (data) w = *data++; |
||||||
|
SPI.transfer16(w); |
||||||
|
count--; |
||||||
|
} |
||||||
|
digitalWriteFast(SPIRAM_CS_PIN, HIGH); |
||||||
|
SPI.endTransaction(); |
||||||
|
} else if (memory_type == BA_AUDIO_MEMORY_CY15B104) { |
||||||
|
addr *= 2; |
||||||
|
|
||||||
|
SPI.beginTransaction(SPISETTING); |
||||||
|
digitalWriteFast(SPIRAM_CS_PIN, LOW); |
||||||
|
SPI.transfer(0x06); //write-enable before every write
|
||||||
|
digitalWriteFast(SPIRAM_CS_PIN, HIGH); |
||||||
|
asm volatile ("NOP\n NOP\n NOP\n NOP\n NOP\n NOP\n"); |
||||||
|
digitalWriteFast(SPIRAM_CS_PIN, LOW); |
||||||
|
SPI.transfer16((0x02 << 8) | (addr >> 16)); |
||||||
|
SPI.transfer16(addr & 0xFFFF); |
||||||
|
while (count) { |
||||||
|
int16_t w = 0; |
||||||
|
if (data) w = *data++; |
||||||
|
SPI.transfer16(w); |
||||||
|
count--; |
||||||
|
} |
||||||
|
digitalWriteFast(SPIRAM_CS_PIN, HIGH); |
||||||
|
SPI.endTransaction();
|
||||||
|
} else if (memory_type == BA_AUDIO_MEMORY_MEMORYBOARD) { |
||||||
|
SPI.beginTransaction(SPISETTING); |
||||||
|
while (count) { |
||||||
|
uint32_t chip = (addr >> 16) + 1; |
||||||
|
digitalWriteFast(MEMBOARD_CS0_PIN, chip & 1); |
||||||
|
digitalWriteFast(MEMBOARD_CS1_PIN, chip & 2); |
||||||
|
digitalWriteFast(MEMBOARD_CS2_PIN, chip & 4); |
||||||
|
uint32_t chipaddr = (addr & 0xFFFF) << 1; |
||||||
|
SPI.transfer16((0x02 << 8) | (chipaddr >> 16)); |
||||||
|
SPI.transfer16(chipaddr & 0xFFFF); |
||||||
|
uint32_t num = 0x10000 - (addr & 0xFFFF); |
||||||
|
if (num > count) num = count; |
||||||
|
count -= num; |
||||||
|
addr += num; |
||||||
|
do { |
||||||
|
int16_t w = 0; |
||||||
|
if (data) w = *data++; |
||||||
|
SPI.transfer16(w); |
||||||
|
} while (--num > 0); |
||||||
|
} |
||||||
|
digitalWriteFast(MEMBOARD_CS0_PIN, LOW); |
||||||
|
digitalWriteFast(MEMBOARD_CS1_PIN, LOW); |
||||||
|
digitalWriteFast(MEMBOARD_CS2_PIN, LOW); |
||||||
|
SPI.endTransaction(); |
||||||
|
} |
||||||
|
#endif |
||||||
|
} |
||||||
|
|
||||||
|
} /* namespace BAGuitar */ |
@ -0,0 +1,104 @@ |
|||||||
|
/*
|
||||||
|
* BAAudioEffectDelayExternal.h |
||||||
|
* |
||||||
|
* Created on: Nov 5, 2017 |
||||||
|
* Author: slascos |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef __BAGUITAR_BAAUDIOEFFECTDELAYEXTERNAL_H |
||||||
|
#define __BAGUITAR_BAAUDIOEFFECTDELAYEXTERNAL_H |
||||||
|
|
||||||
|
#include <Audio.h> |
||||||
|
|
||||||
|
namespace BAGuitar { |
||||||
|
|
||||||
|
/* Audio Library for Teensy 3.X
|
||||||
|
* Copyright (c) 2014, Paul Stoffregen, paul@pjrc.com |
||||||
|
* |
||||||
|
* Development of this audio library was funded by PJRC.COM, LLC by sales of |
||||||
|
* Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop |
||||||
|
* open source software by purchasing Teensy or other PJRC products. |
||||||
|
* |
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy |
||||||
|
* of this software and associated documentation files (the "Software"), to deal |
||||||
|
* in the Software without restriction, including without limitation the rights |
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
||||||
|
* copies of the Software, and to permit persons to whom the Software is |
||||||
|
* furnished to do so, subject to the following conditions: |
||||||
|
* |
||||||
|
* The above copyright notice, development funding notice, and this permission |
||||||
|
* notice shall be included in all copies or substantial portions of the Software. |
||||||
|
* |
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
||||||
|
* THE SOFTWARE. |
||||||
|
*/ |
||||||
|
|
||||||
|
#include "Arduino.h" |
||||||
|
#include "AudioStream.h" |
||||||
|
#include "spi_interrupt.h" |
||||||
|
|
||||||
|
enum BAAudioEffectDelayMemoryType_t { |
||||||
|
BA_AUDIO_MEMORY_23LC1024 = 0, // 128k x 8 S-RAM
|
||||||
|
BA_AUDIO_MEMORY_MEMORYBOARD = 1, |
||||||
|
BA_AUDIO_MEMORY_CY15B104 = 2, // 512k x 8 F-RAM
|
||||||
|
BA_AUDIO_MEMORY_UNDEFINED = 3 |
||||||
|
}; |
||||||
|
|
||||||
|
class BAAudioEffectDelayExternal : public AudioStream |
||||||
|
{ |
||||||
|
public: |
||||||
|
|
||||||
|
BAAudioEffectDelayExternal() : AudioStream(1, inputQueueArray) { |
||||||
|
initialize(BA_AUDIO_MEMORY_23LC1024, 65536); |
||||||
|
} |
||||||
|
BAAudioEffectDelayExternal(BAAudioEffectDelayMemoryType_t type, float milliseconds=1e6) |
||||||
|
: AudioStream(1, inputQueueArray) { |
||||||
|
uint32_t n = (milliseconds*(AUDIO_SAMPLE_RATE_EXACT/1000.0f))+0.5f; |
||||||
|
initialize(type, n); |
||||||
|
} |
||||||
|
|
||||||
|
void delay(uint8_t channel, float milliseconds) { |
||||||
|
if (channel >= 8 || memory_type >= BA_AUDIO_MEMORY_UNDEFINED) return; |
||||||
|
if (milliseconds < 0.0) milliseconds = 0.0; |
||||||
|
uint32_t n = (milliseconds*(AUDIO_SAMPLE_RATE_EXACT/1000.0f))+0.5f; |
||||||
|
n += AUDIO_BLOCK_SAMPLES; |
||||||
|
if (n > memory_length - AUDIO_BLOCK_SAMPLES) |
||||||
|
n = memory_length - AUDIO_BLOCK_SAMPLES; |
||||||
|
delay_length[channel] = n; |
||||||
|
uint8_t mask = activemask; |
||||||
|
if (activemask == 0) AudioStartUsingSPI(); |
||||||
|
activemask = mask | (1<<channel); |
||||||
|
} |
||||||
|
void disable(uint8_t channel) { |
||||||
|
if (channel >= 8) return; |
||||||
|
uint8_t mask = activemask & ~(1<<channel); |
||||||
|
activemask = mask; |
||||||
|
if (mask == 0) AudioStopUsingSPI(); |
||||||
|
} |
||||||
|
virtual void update(void); |
||||||
|
private: |
||||||
|
void initialize(BAAudioEffectDelayMemoryType_t type, uint32_t samples); |
||||||
|
void read(uint32_t address, uint32_t count, int16_t *data); |
||||||
|
void write(uint32_t address, uint32_t count, const int16_t *data); |
||||||
|
void zero(uint32_t address, uint32_t count) { |
||||||
|
write(address, count, NULL); |
||||||
|
} |
||||||
|
uint32_t memory_begin; // the first address in the memory we're using
|
||||||
|
uint32_t memory_length; // the amount of memory we're using
|
||||||
|
uint32_t head_offset; // head index (incoming) data into external memory
|
||||||
|
uint32_t delay_length[8]; // # of sample delay for each channel (128 = no delay)
|
||||||
|
uint8_t activemask; // which output channels are active
|
||||||
|
uint8_t memory_type; // 0=23LC1024, 1=Frank's Memoryboard
|
||||||
|
static uint32_t allocated[2]; |
||||||
|
audio_block_t *inputQueueArray[1]; |
||||||
|
}; |
||||||
|
|
||||||
|
|
||||||
|
} /* namespace BAGuitar */ |
||||||
|
|
||||||
|
#endif /* __BAGUITAR_BAAUDIOEFFECTDELAYEXTERNAL_H */ |
Loading…
Reference in new issue