cleanup

examples/Delay/AnalogDelayDemo/AnalogDelayDemo.ino

@@ -76,13 +76,15 @@ elapsedMillis timer;
 void OnControlChange(byte channel, byte control, byte value) {
   analogDelay.processMidi(channel-1, control, value);
   #ifdef MIDI_DEBUG
-  Serial.print("Control Change, ch=");
-  Serial.print(channel, DEC);
-  Serial.print(", control=");
-  Serial.print(control, DEC);
-  Serial.print(", value=");
-  Serial.print(value, DEC);
-  Serial.println();
+  if (Serial) {
+    Serial.print("Control Change, ch=");
+    Serial.print(channel, DEC);
+    Serial.print(", control=");
+    Serial.print(control, DEC);
+    Serial.print(", value=");
+    Serial.print(value, DEC);
+    Serial.println();
+  }
   #endif
 }
 
@@ -107,19 +109,19 @@ void setup() {
   delay(5);
 
   // Enable the codec
-  Serial.println("Enabling codec...\n");
+  if (Serial) { Serial.println("Enabling codec...\n"); }
   codec.enable();
   delay(100);
 
   // If using external memory request request memory from the manager
   // for the slot
   #ifdef USE_EXT
-  Serial.println("Using EXTERNAL memory");
+  if (Serial) { Serial.println("Using EXTERNAL memory"); }
   // We have to request memory be allocated to our slot.
   externalSram.requestMemory(&delaySlot, 500.0f, MemSelect::MEM0, true);
   delaySlot.clear();
   #else
-  Serial.println("Using INTERNAL memory");
+  if (Serial) { Serial.println("Using INTERNAL memory"); }
   #endif
 
   // Setup MIDI
@@ -166,10 +168,12 @@ void loop() {
 
   if (timer > 1000) {
     timer = 0;
-    Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
-    Serial.print("% ");
-    Serial.print(" analogDelay: "); Serial.print(analogDelay.processorUsage());
-    Serial.println("%");
+    if (Serial) {
+      Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
+      Serial.print("% ");
+      Serial.print(" analogDelay: "); Serial.print(analogDelay.processorUsage());
+      Serial.println("%");
+    }
   }
 
   MIDI.read();

examples/Delay/AnalogDelayDemoExpansion/AnalogDelayDemoExpansion.ino

@@ -130,19 +130,19 @@ void setup() {
   AudioMemory(128);
 
   // Enable and configure the codec
-  Serial.println("Enabling codec...\n");
+  if (Serial) { Serial.println("Enabling codec...\n"); }
   codec.enable();
   codec.setHeadphoneVolume(1.0f); // Max headphone volume
 
   // If using external memory request request memory from the manager
   // for the slot
   #ifdef USE_EXT
-  Serial.println("Using EXTERNAL memory");
+  if (Serial) { Serial.println("Using EXTERNAL memory"); }
   // We have to request memory be allocated to our slot.
   externalSram.requestMemory(&delaySlot, 500.0f, MemSelect::MEM0, true);
   delaySlot.clear();
   #else
-  Serial.println("Using INTERNAL memory");
+  if (Serial) { Serial.println("Using INTERNAL memory"); }
   #endif
 
   // Besure to enable the delay. When disabled, audio is is completely blocked by the effect
@@ -180,7 +180,7 @@ void loop() {
     bypass = !bypass; // change it
     analogDelay.bypass(bypass); // set the new state
     controls.setOutput(led1Handle, !bypass); // Set the LED when NOT bypassed
-    Serial.println(String("BYPASS is ") + bypass);
+    if (Serial) { Serial.println(String("BYPASS is ") + bypass); }
   }
 
   // Use SW2 to cycle through the filters
@@ -189,27 +189,27 @@ void loop() {
     filterIndex = (filterIndex + 1) % 3; // update and potentionall roll the counter 0, 1, 2, 0, 1, 2, ...
     // cast the index between 0 to 2 to the enum class AudioEffectAnalogDelay::Filter
     analogDelay.setFilter(static_cast<AudioEffectAnalogDelay::Filter>(filterIndex)); // will cycle through 0 to 2
-    Serial.println(String("Filter set to ") + filterIndex);
+    if (Serial) { Serial.println(String("Filter set to ") + filterIndex); }
   }
 
   // Use POT1 (left) to control the delay setting
   if (controls.checkPotValue(delayHandle, potValue)) {
     // Pot has changed
-    Serial.println(String("New DELAY setting: ") + potValue);
+    if (Serial) { Serial.println(String("New DELAY setting: ") + potValue); }
     analogDelay.delayFractionMax(potValue);
   }
 
   // Use POT2 (right) to control the feedback setting
   if (controls.checkPotValue(feedbackHandle, potValue)) {
     // Pot has changed
-    Serial.println(String("New FEEDBACK setting: ") + potValue);
+    if (Serial) { Serial.println(String("New FEEDBACK setting: ") + potValue); }
     analogDelay.feedback(potValue);
   }
 
   // Use POT3 (centre) to control the mix setting
   if (controls.checkPotValue(mixHandle, potValue)) {
     // Pot has changed
-    Serial.println(String("New MIX setting: ") + potValue);
+    if (Serial) { Serial.println(String("New MIX setting: ") + potValue); }
     analogDelay.mix(potValue);
   }
 
@@ -235,10 +235,12 @@ void loop() {
 
   if (timer > 1000) {
     timer = 0;
-    Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
-    Serial.print("% ");
-    Serial.print(" analogDelay: "); Serial.print(analogDelay.processorUsage());
-    Serial.println("%");
+    if (Serial) {
+      Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
+      Serial.print("% ");
+      Serial.print(" analogDelay: "); Serial.print(analogDelay.processorUsage());
+      Serial.println("%");
+    }
   }
 
 }

examples/Delay/ExternalDelayDemo/ExternalDelayDemo.ino

@@ -1,15 +1,15 @@
 /*************************************************************************
  * This demo uses the BALibrary library to provide enhanced control of
  * the TGA Pro board.
- * 
+ *
  * The latest copy of the BA Guitar library can be obtained from
  * https://github.com/Blackaddr/BALibrary
- * 
+ *
  * This demo shows to use the BAAudioEffectDelayExternal audio class
  * to create long delays using external SPI RAM.
- * 
+ *
  * Eight delay taps are configured from a single SRAM device.
- * 
+ *
  */
 #include <Audio.h>
 #include "BALibrary.h"
@@ -60,12 +60,12 @@ void setup() {
   Serial.begin(57600);
   delay(200);
   AudioMemory(64);
-  
+
   delay(500);
-  Serial.println(String("Starting...\n"));
+  if (Serial) { Serial.println(String("Starting...\n")); }
   delay(100);
 
-  Serial.println("Enabling codec...\n");
+  if (Serial) { Serial.println("Enabling codec...\n"); }
   codecControl.enable();
   delay(100);
 
@@ -90,12 +90,12 @@ void setup() {
   delayOutMixerB.gain(1, 0.05f);
   delayOutMixerB.gain(2, 0.025f);
   delayOutMixerB.gain(3, 0.0125f);
-  
+
   // mix the original signal with the two delay mixers
   delayMixer.gain(0, 1.0f);
   delayMixer.gain(1, 1.0f);
   delayMixer.gain(2, 1.0f);
-  
+
 }
 
 void loop() {

examples/Delay/SoundOnSoundDemo/SoundOnSoundDemo.ino

@@ -84,13 +84,15 @@ elapsedMillis timer;
 void OnControlChange(byte channel, byte control, byte value) {
   sos.processMidi(channel-1, control, value);
   #ifdef MIDI_DEBUG
-  Serial.print("Control Change, ch=");
-  Serial.print(channel, DEC);
-  Serial.print(", control=");
-  Serial.print(control, DEC);
-  Serial.print(", value=");
-  Serial.print(value, DEC);
-  Serial.println();
+  if (Serial) {
+    Serial.print("Control Change, ch=");
+    Serial.print(channel, DEC);
+    Serial.print(", control=");
+    Serial.print(control, DEC);
+    Serial.print(", value=");
+    Serial.print(value, DEC);
+    Serial.println();
+  }
   #endif
 }
 
@@ -109,16 +111,13 @@ void setup() {
 
   // Disable the codec first
   codec.disable();
-  delay(100);
   AudioMemory(128);
-  delay(5);
 
   SPI_MEM0_1M(); // Configure the SPI memory size
 
   // Enable the codec
-  Serial.println("Enabling codec...\n");
+  if (Serial) { Serial.println("Enabling codec...\n"); }
   codec.enable();
-  delay(100);
 
   // We have to request memory be allocated to our slot.
   externalSram.requestMemory(&delaySlot, BAHardwareConfig.getSpiMemSizeBytes(MemSelect::MEM0), MemSelect::MEM0, true);
@@ -178,10 +177,12 @@ void loop() {
 
   if (timer > 1000) {
     timer = 0;
-    Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
-    Serial.print("% ");
-    Serial.print(" SOS: "); Serial.print(sos.processorUsage());
-    Serial.println("%");
+    if (Serial) {
+      Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
+      Serial.print("% ");
+      Serial.print(" SOS: "); Serial.print(sos.processorUsage());
+      Serial.println("%");
+    }
   }
 
   MIDI.read();

examples/Delay/SoundOnSoundExpansionDemo/SoundOnSoundExpansionDemo.ino

@@ -114,7 +114,6 @@ void setup() {
   //SPI_MEM0_4M();  // Older REVB / REVA boards offered 1M or 4M
   //SPI_MEM0_1M();
 
-  delay(100);
   delay(100); // wait a bit for serial to be available
   Serial.begin(57600); // Start the serial port
   delay(100); // wait a bit for serial to be available
@@ -136,7 +135,7 @@ void setup() {
   AudioMemory(128);
 
   // Enable the codec
-  Serial.println("Enabling codec...\n");
+  if (Serial) { Serial.println("Enabling codec...\n"); }
   codec.enable();
   codec.setHeadphoneVolume(1.0f); // Max headphone volume
 
@@ -188,34 +187,34 @@ void loop() {
   // LED1 will be directly control by the SOS effect, not by BAPhysicalControls
   if (controls.isSwitchToggled(gateHandle)) {
     sos.trigger();
-    Serial.println("GATE OPEN is triggered");
+    if (Serial) { Serial.println("GATE OPEN is triggered"); }
   }
 
   // Use SW2 to clear out the SOS delayline
   controls.setOutput(led2Handle, controls.getSwitchValue(led2Handle));
   if (controls.isSwitchToggled(clearHandle)) {
     sos.clear();
-    Serial.println("GATE CLEAR is triggered");
+    if (Serial) { Serial.println("GATE CLEAR is triggered"); }
   }
 
   // Use POT1 (left) to control the OPEN GATE time
   if (controls.checkPotValue(openHandle, potValue)) {
     // Pot has changed
     sos.gateOpenTime(potValue * MAX_GATE_TIME_MS);
-    Serial.println(String("New OPEN GATE setting (ms): ") + (potValue * MAX_GATE_TIME_MS));
+    if (Serial) { Serial.println(String("New OPEN GATE setting (ms): ") + (potValue * MAX_GATE_TIME_MS)); }
   }
 
   // Use POT2 (right) to control the CLOSE GATE time
   if (controls.checkPotValue(closeHandle, potValue)) {
     // Pot has changed
     sos.gateCloseTime(potValue * MAX_GATE_TIME_MS);
-    Serial.println(String("New CLOSE GATE setting (ms): ") + (potValue * MAX_GATE_TIME_MS));
+    if (Serial) { Serial.println(String("New CLOSE GATE setting (ms): ") + (potValue * MAX_GATE_TIME_MS)); }
   }
 
   // Use POT3 (centre) to control the sos effect volume
   if (controls.checkPotValue(volumeHandle, potValue)) {
     // Pot has changed
-    Serial.println(String("New SOS VOLUME setting: ") + potValue);
+    if (Serial) { Serial.println(String("New SOS VOLUME setting: ") + potValue); }
     sos.volume(potValue);
   }
 
@@ -241,9 +240,11 @@ void loop() {
 
   if (timer > 1000) {
     timer = 0;
-    Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
-    Serial.print("% ");
-    Serial.print(" SOS: "); Serial.print(sos.processorUsage());
-    Serial.println("%");
+    if (Serial) {
+      Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
+      Serial.print("% ");
+      Serial.print(" SOS: "); Serial.print(sos.processorUsage());
+      Serial.println("%");
+    }
   }
 }

examples/Modulation/TemoloDemo/TemoloDemo.ino

@@ -1,17 +1,17 @@
 /*************************************************************************
  * This demo uses the BALibrary library to provide enhanced control of
  * the TGA Pro board.
- * 
+ *
  * The latest copy of the BA Guitar library can be obtained from
  * https://github.com/Blackaddr/BALibrary
- * 
+ *
  * This example demonstrates teh AudioEffectsTremolo effect. It can
  * be controlled using USB MIDI. You can get a free USB MIDI Controller
- * appliation at 
+ * appliation at
  * http://www.blackaddr.com/downloads/BAMidiTester/
  * or the source code at
  * https://github.com/Blackaddr/BAMidiTester
- * 
+ *
  * Even if you don't control the guitar effect with USB MIDI, you must set
  * the Arduino IDE USB-Type under Tools to "Serial + MIDI"
  */
@@ -57,14 +57,16 @@ elapsedMillis timer;
 void OnControlChange(byte channel, byte control, byte value) {
   tremolo.processMidi(channel-1, control, value);
   #ifdef MIDI_DEBUG
-  Serial.print("Control Change, ch=");
-  Serial.print(channel, DEC);
-  Serial.print(", control=");
-  Serial.print(control, DEC);
-  Serial.print(", value=");
-  Serial.print(value, DEC);
-  Serial.println();
-  #endif  
+  if (Serial) {
+    Serial.print("Control Change, ch=");
+    Serial.print(channel, DEC);
+    Serial.print(", control=");
+    Serial.print(control, DEC);
+    Serial.print(", value=");
+    Serial.print(value, DEC);
+    Serial.println();
+  }
+  #endif
 }
 
 void setup() {
@@ -72,26 +74,24 @@ void setup() {
   TGA_PRO_MKII_REV1(); // Declare the version of the TGA Pro you are using.
   //TGA_PRO_REVB(x);
   //TGA_PRO_REVA(x);
-  
+
   delay(100);
   Serial.begin(57600); // Start the serial port
 
   // Disable the codec first
   codec.disable();
-  delay(100);
   AudioMemory(128);
   delay(5);
 
   // Enable the codec
-  Serial.println("Enabling codec...\n");
+  if (Serial) { Serial.println("Enabling codec...\n"); }
   codec.enable();
-  delay(100);
 
   // Setup MIDI
   MIDI.begin(MIDI_CHANNEL_OMNI);
   MIDI.setHandleControlChange(OnControlChange);
   usbMIDI.setHandleControlChange(OnControlChange);
-  
+
   // Configure which MIDI CC's will control the effect parameters
   tremolo.mapMidiControl(AudioEffectTremolo::BYPASS,16);
   tremolo.mapMidiControl(AudioEffectTremolo::RATE,20);
@@ -100,7 +100,7 @@ void setup() {
 
   // Besure to enable the tremolo. When disabled, audio is is completely blocked
   // to minimize resources to nearly zero.
-  tremolo.enable(); 
+  tremolo.enable();
 
   // Set some default values.
   // These can be changed by sending MIDI CC messages over the USB using
@@ -121,10 +121,12 @@ void loop() {
 
   if (timer > 1000) {
     timer = 0;
-    Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
-    Serial.print("% ");
-    Serial.print(" tremolo: "); Serial.print(tremolo.processorUsage());
-    Serial.println("%");
+    if (Serial) {
+      Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
+      Serial.print("% ");
+      Serial.print(" tremolo: "); Serial.print(tremolo.processorUsage());
+      Serial.println("%");
+    }
   }
 
   MIDI.read();

examples/Modulation/TremoloDemoExpansion/TremoloDemoExpansion.ino

@@ -1,21 +1,21 @@
 /*************************************************************************
  * This demo uses the BALibrary library to provide enhanced control of
  * the TGA Pro board.
- * 
+ *
  * The latest copy of the BA Guitar library can be obtained from
  * https://github.com/Blackaddr/BALibrary
- * 
+ *
  * This example demonstrates teh BAAudioEffectsTremolo effect. It can
  * be controlled using the Blackaddr Audio "Expansion Control Board".
- * 
+ *
  * POT1 (left) controls the tremolo RATE
  * POT2 (right) controls the tremolo DEPTH
  * POT3 (center) controls the output VOLUME
  * SW1 will enable/bypass the audio effect. LED1 will be on when effect is enabled.
  * SW2 will cycle through the 3 pre-programmed waveforms. NOTE: any waveform other than Sine will cause
  *     pops/clicks since the waveforms are not bandlimited.
- * 
- * 
+ *
+ *
  * Using the Serial Montitor, send 'u' and 'd' characters to increase or decrease
  * the headphone volume between values of 0 and 9.
  */
@@ -60,7 +60,7 @@ AudioConnection rightOut(tremolo,0, i2sOut, 1);
 // - LED2 (right) will illuminate when pressing SW2.
 //////////////////////////////////////////
 // To get the calibration values for your particular board, first run the
-// BAExpansionCalibrate.ino example and 
+// BAExpansionCalibrate.ino example and
 constexpr int  potCalibMin = 1;
 constexpr int  potCalibMax = 1018;
 constexpr bool potSwapDirection = true;
@@ -82,7 +82,7 @@ void setup() {
   TGA_PRO_MKII_REV1(); // Declare the version of the TGA Pro you are using.
   //TGA_PRO_REVB(x);
   //TGA_PRO_REVA(x);
-  
+
   delay(100); // wait a bit for serial to be available
   Serial.begin(57600); // Start the serial port
   delay(100);
@@ -93,8 +93,8 @@ void setup() {
   waveformHandle = controls.addSwitch(BA_EXPAND_SW2_PIN); // will be used for stepping through filters
   // pots
   rateHandle   = controls.addPot(BA_EXPAND_POT1_PIN, potCalibMin, potCalibMax, potSwapDirection); // control the amount of delay
-  depthHandle  = controls.addPot(BA_EXPAND_POT2_PIN, potCalibMin, potCalibMax, potSwapDirection); 
-  volumeHandle = controls.addPot(BA_EXPAND_POT3_PIN, potCalibMin, potCalibMax, potSwapDirection); 
+  depthHandle  = controls.addPot(BA_EXPAND_POT2_PIN, potCalibMin, potCalibMax, potSwapDirection);
+  volumeHandle = controls.addPot(BA_EXPAND_POT3_PIN, potCalibMin, potCalibMax, potSwapDirection);
   // leds
   led1Handle = controls.addOutput(BA_EXPAND_LED1_PIN);
   led2Handle = controls.addOutput(BA_EXPAND_LED2_PIN); // will illuminate when pressing SW2
@@ -104,18 +104,18 @@ void setup() {
   AudioMemory(128);
 
   // Enable and configure the codec
-  Serial.println("Enabling codec...\n");
+  if (Serial) { Serial.println("Enabling codec...\n"); }
   codec.enable();
   codec.setHeadphoneVolume(1.0f); // Max headphone volume
-  
+
   // Besure to enable the tremolo. When disabled, audio is is completely blocked by the effect
   // to minimize resource usage to nearly to nearly zero.
-  tremolo.enable(); 
+  tremolo.enable();
 
   // Set some default values.
   // These can be changed using the controls on the Blackaddr Audio Expansion Board
   tremolo.bypass(false);
-  controls.setOutput(led1Handle, !tremolo.isBypass()); // Set the LED when NOT bypassed  
+  controls.setOutput(led1Handle, !tremolo.isBypass()); // Set the LED when NOT bypassed
   tremolo.rate(0.0f);
   tremolo.depth(1.0f);
 
@@ -140,8 +140,8 @@ void loop() {
     bool bypass = tremolo.isBypass(); // get the current state
     bypass = !bypass; // change it
     tremolo.bypass(bypass); // set the new state
-    controls.setOutput(led1Handle, !bypass); // Set the LED when NOT bypassed  
-    Serial.println(String("BYPASS is ") + bypass);
+    controls.setOutput(led1Handle, !bypass); // Set the LED when NOT bypassed
+    if (Serial) { Serial.println(String("BYPASS is ") + bypass); }
   }
 
   // Use SW2 to cycle through the waveforms
@@ -150,27 +150,27 @@ void loop() {
     waveformIndex = (waveformIndex + 1) % static_cast<unsigned>(Waveform::NUM_WAVEFORMS);
     // cast the index
     tremolo.setWaveform(static_cast<Waveform>(waveformIndex));
-    Serial.println(String("Waveform set to ") + waveformIndex);
+    if (Serial) { Serial.println(String("Waveform set to ") + waveformIndex); }
   }
 
   // Use POT1 (left) to control the rate setting
   if (controls.checkPotValue(rateHandle, potValue)) {
     // Pot has changed
-    Serial.println(String("New RATE setting: ") + potValue);
+    if (Serial) { Serial.println(String("New RATE setting: ") + potValue); }
     tremolo.rate(potValue);
   }
 
   // Use POT2 (right) to control the depth setting
   if (controls.checkPotValue(depthHandle, potValue)) {
     // Pot has changed
-    Serial.println(String("New DEPTH setting: ") + potValue);
+    if (Serial) { Serial.println(String("New DEPTH setting: ") + potValue); }
     tremolo.depth(potValue);
   }
 
   // Use POT3 (centre) to control the volume setting
   if (controls.checkPotValue(volumeHandle, potValue)) {
     // Pot has changed
-    Serial.println(String("New VOLUME setting: ") + potValue);
+    if (Serial) { Serial.println(String("New VOLUME setting: ") + potValue); }
     tremolo.volume(potValue);
   }
 
@@ -179,11 +179,11 @@ void loop() {
     if (Serial.available() > 0) {
       while (Serial.available()) {
         char key = Serial.read();
-        if (key == 'u') { 
+        if (key == 'u') {
           headphoneVolume = (headphoneVolume + 1) % MAX_HEADPHONE_VOL;
           Serial.println(String("Increasing HEADPHONE volume to ") + headphoneVolume);
         }
-        else if (key == 'd') { 
+        else if (key == 'd') {
           headphoneVolume = (headphoneVolume - 1) % MAX_HEADPHONE_VOL;
           Serial.println(String("Decreasing HEADPHONE volume to ") + headphoneVolume);
         }
@@ -193,13 +193,15 @@ void loop() {
   }
 
   delay(20); // Without some minimal delay here it will be difficult for the pots/switch changes to be detected.
-  
+
   if (timer > 1000) {
     timer = 0;
-    Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
-    Serial.print("% ");
-    Serial.print(" tremolo: "); Serial.print(tremolo.processorUsage());
-    Serial.println("%");
+    if (Serial) {
+      Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
+      Serial.print("% ");
+      Serial.print(" tremolo: "); Serial.print(tremolo.processorUsage());
+      Serial.println("%");
+    }
   }
 
 }

examples/Tests/DMA_MEM0_test/DMA_MEM0_test.ino

@@ -72,7 +72,7 @@ void setup() {
   SPI_MEM0_1M();
   SPI_MAX_ADDR = BAHardwareConfig.getSpiMemMaxAddr(MemSelect::MEM0);
 
-  Serial.println("Enabling SPI, testing MEM0");
+  Serial.printf("Enabling SPI, testing MEM0 up to addres %08X\n\r", SPI_MAX_ADDR);
   spiMem0.begin();
 }
 

examples/Tests/DMA_MEM1_test/DMA_MEM1_test.ino

@@ -1,16 +1,16 @@
 /*************************************************************************
  * This demo uses the BALibrary to provide enhanced control of
  * the TGA Pro board.
- * 
+ *
  * The latest copy of the BALibrary can be obtained from
  * https://github.com/Blackaddr/BALibrary
- * 
+ *
  * This demo will perform a DMA memory test on MEM1 attached
  * to SPI1.
- * 
+ *
  * NOTE: SPI MEM1 can be used by a Teensy 3.5/3.6.
  * pins.
- * 
+ *
  */
 #include <Wire.h>
 #include "BALibrary.h"
@@ -30,7 +30,6 @@ using namespace BALibrary;
 SPISettings memSettings(20000000, MSBFIRST, SPI_MODE0);
 const int cs0pin = SPI1_CS_PIN;
 
-BAGpio           gpio;  // access to User LED
 BASpiMemoryDMA   spiMem1(SpiDeviceId::SPI_DEVICE1);
 
 bool compareBuffers(uint8_t *a, uint8_t *b, size_t numBytes)
@@ -61,37 +60,35 @@ void setup() {
   TGA_PRO_MKII_REV1(); // Declare the version of the TGA Pro you are using.
   //TGA_PRO_REVB(x);
   //TGA_PRO_REVA(x);
-  
-  gpio.begin();
 
   Serial.begin(57600);
   while (!Serial) { yield(); }
   delay(5);
 
-  SPI_MEM1_1M();
+  SPI_MEM1_64M();
   SPI_MAX_ADDR = BAHardwareConfig.getSpiMemMaxAddr(MemSelect::MEM1);
 
-  Serial.println("Enabling SPI, testing MEM1");
+  Serial.printf("Enabling SPI, testing MEM1, max address %08X\n\r", SPI_MAX_ADDR); Serial.flush();
   spiMem1.begin();
 }
 
 
 bool spi8BitTest(void) {
-  
+
   size_t spiAddress = 0;
   int spiPhase = 0;
   constexpr uint8_t MASK80 = 0xaa;
   constexpr uint8_t MASK81 = 0x55;
-  
+
   uint8_t src8[DMA_SIZE];
   uint8_t dest8[DMA_SIZE];
-  
+
   // Write to the memory using 8-bit transfers
-  Serial.println("\nStarting 8-bit test Write/Read");
+  Serial.println("\nStarting 8-bit test Write/Read"); Serial.flush();
   while (spiPhase < 4) {
     spiAddress = 0;
     while (spiAddress <= SPI_MAX_ADDR) {
-      
+
       // fill the write data buffer
       switch (spiPhase) {
         case 0 :
@@ -114,15 +111,15 @@ bool spi8BitTest(void) {
             src8[i] = ((spiAddress+i) & 0xff) ^ (!MASK81);
           }
           break;
-      }      
-  
+      }
+
       // Send the DMA transfer
       spiMem1.write(spiAddress, src8, DMA_SIZE);
       // wait until write is done
       while (spiMem1.isWriteBusy()) {}
-      spiAddress += DMA_SIZE;    
+      spiAddress += DMA_SIZE;
     }
-  
+
     // Read back the data using 8-bit transfers
     spiAddress = 0;
     while (spiAddress <= SPI_MAX_ADDR) {
@@ -149,15 +146,15 @@ bool spi8BitTest(void) {
         }
         break;
       }
-  
+
       // Read back the DMA data
       spiMem1.read(spiAddress, dest8, DMA_SIZE);
       // wait until read is done
       while (spiMem1.isReadBusy()) {}
-      if (!compareBuffers(src8, dest8, DMA_SIZE)) { 
+      if (!compareBuffers(src8, dest8, DMA_SIZE)) {
         Serial.println(String("ERROR @") + spiAddress);
-        return false; } // stop the test    
-      spiAddress += DMA_SIZE; 
+        return false; } // stop the test
+      spiAddress += DMA_SIZE;
     }
     Serial.println(String("Phase ") + spiPhase + String(": 8-bit Write/Read test passed!"));
     spiPhase++;
@@ -169,7 +166,7 @@ bool spi8BitTest(void) {
   }
 #endif
 
-  Serial.println("\nStarting 8-bit test Zero/Read");
+  Serial.println("\nStarting 8-bit test Zero/Read");  Serial.flush();
   // Clear the memory
   spiAddress = 0;
   memset(src8, 0, DMA_SIZE);
@@ -178,7 +175,7 @@ bool spi8BitTest(void) {
       spiMem1.zero(spiAddress, DMA_SIZE);
       // wait until write is done
       while (spiMem1.isWriteBusy()) {}
-      spiAddress += DMA_SIZE;     
+      spiAddress += DMA_SIZE;
   }
 
   // Check the memory is clear
@@ -188,8 +185,8 @@ bool spi8BitTest(void) {
     spiMem1.read(spiAddress, dest8, DMA_SIZE);
     // wait until read is done
     while (spiMem1.isReadBusy()) {}
-    if (!compareBuffers(src8, dest8, DMA_SIZE)) { return false; } // stop the test    
-    spiAddress += DMA_SIZE; 
+    if (!compareBuffers(src8, dest8, DMA_SIZE)) { return false; } // stop the test
+    spiAddress += DMA_SIZE;
   }
   Serial.println(String(": 8-bit Zero/Read test passed!"));
   return true;
@@ -201,16 +198,16 @@ bool spi16BitTest(void) {
   constexpr uint16_t MASK160 = 0xaaaa;
   constexpr uint16_t MASK161 = 0x5555;
   constexpr int NUM_DATA = DMA_SIZE / sizeof(uint16_t);
-  
+
   uint16_t src16[NUM_DATA];
   uint16_t dest16[NUM_DATA];
 
   // Write to the memory using 16-bit transfers
-  Serial.println("\nStarting 16-bit test");
+  Serial.println("\nStarting 16-bit test");  Serial.flush();
   while (spiPhase < 4) {
     spiAddress = 0;
     while (spiAddress <= SPI_MAX_ADDR) {
-      
+
       // fill the write data buffer
       switch (spiPhase) {
         case 0 :
@@ -234,14 +231,14 @@ bool spi16BitTest(void) {
           }
           break;
       }
-  
+
       // Send the DMA transfer
       spiMem1.write16(spiAddress, src16, NUM_DATA);
       // wait until write is done
       while (spiMem1.isWriteBusy()) {}
-      spiAddress += DMA_SIZE;    
+      spiAddress += DMA_SIZE;
     }
-  
+
     // Read back the data using 8-bit transfers
     spiAddress = 0;
     while (spiAddress <= SPI_MAX_ADDR) {
@@ -268,15 +265,15 @@ bool spi16BitTest(void) {
         }
         break;
       }
-  
+
       // Read back the DMA data
       spiMem1.read16(spiAddress, dest16, NUM_DATA);
       // wait until read is done
       while (spiMem1.isReadBusy()) {}
-      if (!compareBuffers16(src16, dest16, NUM_DATA)) { 
+      if (!compareBuffers16(src16, dest16, NUM_DATA)) {
         Serial.print("ERROR @"); Serial.println(spiAddress, HEX);
-        return false; } // stop the test    
-      spiAddress += DMA_SIZE; 
+        return false; } // stop the test
+      spiAddress += DMA_SIZE;
     }
     Serial.println(String("Phase ") + spiPhase + String(": 16-bit test passed!"));
     spiPhase++;
@@ -287,7 +284,7 @@ bool spi16BitTest(void) {
   }
 #endif
 
-  Serial.println("\nStarting 16-bit test Zero/Read");
+  Serial.println("\nStarting 16-bit test Zero/Read");  Serial.flush();
   // Clear the memory
   spiAddress = 0;
   memset(src16, 0, DMA_SIZE);
@@ -296,7 +293,7 @@ bool spi16BitTest(void) {
       spiMem1.zero16(spiAddress, NUM_DATA);
       // wait until write is done
       while (spiMem1.isWriteBusy()) {}
-      spiAddress += DMA_SIZE;     
+      spiAddress += DMA_SIZE;
   }
 
   // Check the memory is clear
@@ -306,8 +303,8 @@ bool spi16BitTest(void) {
     spiMem1.read16(spiAddress, dest16, NUM_DATA);
     // wait until read is done
     while (spiMem1.isReadBusy()) {}
-    if (!compareBuffers16(src16, dest16, NUM_DATA)) { return false; } // stop the test    
-    spiAddress += DMA_SIZE; 
+    if (!compareBuffers16(src16, dest16, NUM_DATA)) { return false; } // stop the test
+    spiAddress += DMA_SIZE;
   }
   Serial.println(String(": 16-bit Zero/Read test passed!"));
   return true;

examples/Tests/TGA_PRO_Basic_Test/PhysicalControls.cpp

@@ -12,14 +12,14 @@ BAPhysicalControls *controlPtr = nullptr;
 void configPhysicalControls(BAPhysicalControls &controls, BAAudioControlWM8731 &codec)
 {
   // Setup the controls. The return value is the handle to use when checking for control changes, etc.
-  
+
   // pushbuttons
   sw1Handle = controls.addSwitch(BA_EXPAND_SW1_PIN);
   sw2Handle = controls.addSwitch(BA_EXPAND_SW2_PIN);
   // pots
   pot1Handle = controls.addPot(BA_EXPAND_POT1_PIN, potCalibMin, potCalibMax, potSwapDirection);
-  pot2Handle = controls.addPot(BA_EXPAND_POT2_PIN, potCalibMin, potCalibMax, potSwapDirection); 
-  pot3Handle = controls.addPot(BA_EXPAND_POT3_PIN, potCalibMin, potCalibMax, potSwapDirection); 
+  pot2Handle = controls.addPot(BA_EXPAND_POT2_PIN, potCalibMin, potCalibMax, potSwapDirection);
+  pot3Handle = controls.addPot(BA_EXPAND_POT3_PIN, potCalibMin, potCalibMax, potSwapDirection);
   // leds
   led1Handle = controls.addOutput(BA_EXPAND_LED1_PIN);
   led2Handle = controls.addOutput(BA_EXPAND_LED2_PIN); // will illuminate when pressing SW2
@@ -45,12 +45,12 @@ void checkPot(unsigned id)
     default :
       handle = pot1Handle;
   }
-  
+
   if (controlPtr->checkPotValue(handle, potValue)) {
     // Pot has changed
     codecPtr->setHeadphoneVolume(potValue);
-    Serial.println(String("POT") + id + String(" value: ") + potValue);
-  } 
+    if (Serial) { Serial.println(String("POT") + id + String(" value: ") + potValue); }
+  }
 }
 
 void checkSwitch(unsigned id)
@@ -72,7 +72,7 @@ void checkSwitch(unsigned id)
   }
 
   if (controlPtr->isSwitchToggled(swHandle)) {
-    Serial.println(String("Button ") + id + String(" pressed"));
+    if (Serial) { Serial.println(String("Button ") + id + String(" pressed")); }
   }
 
   bool pressed = controlPtr->isSwitchHeld(swHandle);

examples/Tests/TGA_PRO_Basic_Test/TGA_PRO_Basic_Test.ino

@@ -1,44 +1,44 @@
 /*************************************************************************
  * This demo is used for manufacturing testing on the TGA Pro Expansion
  * Control Board.
- * 
+ *
  * This will test the following on the TGA Pro:
- * 
+ *
  * - Audio INPUT and OUTPUT JACKS
  * - Midi INPUT and Midi OUTPUT jacks
  * - MEM0 (if installed)
  * - User LED
- * 
+ *
  * This will also test the Expansion Control Board (if installed):
- * 
+ *
  * - three POT knobs
  * - two pushbutton SWitches
  * - two LEDs
  * - headphone output
- * 
+ *
  * SETUP INSTRUCTIONS:
- * 
+ *
  * 1) Connect an audio source to AUDIO INPUT.
  * 2) Connect AUDIO OUTPUT to amp, stereo, headphone amplifier, etc.
  * 3) if testing the MIDI ports, connect a MIDI cable between MIDI INPUT and MIDI OUTPUT
  * 4) comment out any tests you want to skip
  * 5) Compile and run the demo on your Teensy with TGA Pro.
  * 6) Launch the Arduino Serial Monitor to see results.
- * 
+ *
  * TESTING INSTRUCTIONS:
- * 
+ *
  * 1) Check the Serial Monitor for the results of the MIDI testing, and external memory testing.
  * 2) Confirm that the audio sent to the INPUT is coming out the OUTPUT.
  * 3) Confirm the User LED is blinking every 1 or 2 seconds
- * 
+ *
  * If using the Expansion Control Board:
- * 
+ *
  * 1) Try pushing the pushbuttons. When pushed, they should turn on their corresponding LED.
  * 2) Try turn each of the knobs one at a time. They should adjust the volume.
- * 
+ *
  * The latest copy of the BA Guitar library can be obtained from
  * https://github.com/Blackaddr/BALibrary
- * 
+ *
  */
 
 //#define RUN_MIDI_TEST // Uncomment this line to run a MIDI test. You must connect a MIDI cable as a loopback between the MIDI input and output jacks.
@@ -93,7 +93,6 @@ void setup() {
   gpio.begin();
 
   Serial.begin(57600);
-  //while (!Serial) { yield(); }
   delay(500);
 
   // Disable the audio codec first
@@ -104,20 +103,20 @@ void setup() {
   codec.setHeadphoneVolume(0.8f); // Set headphone volume
 #if defined(RUN_EXP_TEST)
   configPhysicalControls(controls, codec);
-  Serial.println("Now monitoring for input from Expansion Control Board");
+  if (Serial) { Serial.println("Now monitoring for input from Expansion Control Board"); }
 #endif
 
   // Run the initial Midi connectivity and SPI memory tests.
 #if defined(RUN_MIDI_TEST)
-  if (uartTest()) { Serial.println("MIDI Ports testing PASSED!"); }
+  if (uartTest()) { if (Serial) Serial.println("MIDI Ports testing PASSED!"); }
 #endif
 
 #if defined(RUN_MEMO_TEST)
   SPI_MEM0_64M();   // declare the 64Mbit optional PSI memory
   //SPI_MEM0_4M();  // REVB and REVA came with 4M or 1M
-  // SPI_MEM0_1M(); 
+  // SPI_MEM0_1M();
   spiMem0.begin(); delay(10);
-  if (spiTest(&spiMem0, 0)) { Serial.println("SPI0 testing PASSED!");}
+  if (spiTest(&spiMem0, 0)) { if (Serial) Serial.println("SPI0 testing PASSED!");}
 #endif
 }
 
@@ -132,7 +131,7 @@ void loop() {
   #endif
 
   delay(20); // Without some minimal delay here it will be difficult for the pots/switch changes to be detected.
-  
+
   loopCounter++;
   if (timer > 1000) {
     timer = 0;

examples/Tests/TGA_PRO_Basic_Test/UartTest.cpp

@@ -4,7 +4,7 @@
 using namespace BALibrary;
 
 constexpr unsigned MIDI_RATE = 31250;
-constexpr unsigned HIGH_RATE = 230400; 
+constexpr unsigned HIGH_RATE = 230400;
 constexpr unsigned TEST_TIME = 5; // 5 second test each
 
 static unsigned baudRate = MIDI_RATE; // start with low speed
@@ -19,14 +19,15 @@ bool uartTest(void)
 {
   Serial1.begin(baudRate, SERIAL_8N1);
   delay(100);
-  while(!Serial) {}
+  if (!Serial) { return false; }  // skip uart test if Serial not connected
+
   Serial.println(String("\nRunning MIDI Port speed test at ") + baudRate);
 
   // write the first data
   Serial1.write(writeData);
 
   while(!testFailed && !testDone) {
-    
+
     if (loopCounter >= (baudRate/4)) { // the divisor determines how long the test runs for
       // next test
       switch (testPhase) {
@@ -38,13 +39,13 @@ bool uartTest(void)
       }
 
       if (errorCount == 0) { Serial.println("TEST PASSED!"); }
-      else { 
+      else {
         Serial.println("MIDI PORT TEST FAILED!");
       }
       errorCount = 0;
       testPhase++;
       loopCounter = 0;
-      
+
       if (!testDone) {
         Serial.println(String("\nRunning MIDI Port speed test at ") + baudRate);
         Serial1.begin(baudRate, SERIAL_8N1);
@@ -53,24 +54,24 @@ bool uartTest(void)
         Serial.println("MIDI PORT TEST DONE!\n");
       }
     }
-    
+
     // Wait for read data
-    if (Serial1.available()) {  
+    if (Serial1.available()) {
       uint8_t readData= Serial1.read();
       if (readData != writeData) {
         Serial.println(String("MIDI ERROR: readData = ") + readData + String(" writeData = ") + writeData);
         errorCount++;
       }
-    
+
       if ((loopCounter % (baudRate/64)) == 0) { // the divisor determines how often the period is printed
         Serial.print("."); Serial.flush();
       }
-    
+
       if (errorCount > 16) {
         Serial.println("Halting test");
         testFailed = true;
       }
-    
+
       loopCounter++;
       writeData++;
       Serial1.write(writeData);

examples/Tests/TGA_PRO_Basic_Test/spiTest.cpp

@@ -32,13 +32,14 @@ int calcData(int spiAddress, int loopPhase, int maskPhase)
     break;
     case 3:
     data = ~spiAddress ^ mask1;
-    
+
   }
   return (data & 0xffff);
 }
 
 bool spiTest(BASpiMemory *mem, int id)
 {
+  if (!Serial) { return false; }  // Skip test if Serial not connected
   int spiAddress = 0;
   int spiErrorCount = 0;
 
@@ -47,7 +48,7 @@ bool spiTest(BASpiMemory *mem, int id)
   uint16_t memBlock[NUM_BLOCK_WORDS];
   uint16_t goldData[NUM_BLOCK_WORDS];
 
-  SPI_MAX_ADDR = BAHardwareConfig.getSpiMemMaxAddr(0); // assume for this test both memories are the same size so use MEM0
+  SPI_MAX_ADDR = BAHardwareConfig.getSpiMemMaxAddr(MemSelect::MEM0); // assume for this test both memories are the same size so use MEM0
   const size_t SPI_MEM_SIZE_BYTES = BAHardwareConfig.getSpiMemSizeBytes(id);
 
   Serial.println(String("Starting SPI MEM Test of ") + SPI_MEM_SIZE_BYTES + String(" bytes"));
@@ -55,9 +56,9 @@ bool spiTest(BASpiMemory *mem, int id)
   for (int cnt = 0; cnt < NUM_TESTS; cnt++) {
 
     // Zero check
-    mem->zero16(0, SPI_MEM_SIZE_BYTES / sizeof(uint16_t));    
+    mem->zero16(0, SPI_MEM_SIZE_BYTES / sizeof(uint16_t));
     while (mem->isWriteBusy()) {}
-    
+
     for (spiAddress = 0; spiAddress <= SPI_MAX_ADDR; spiAddress += NUM_BLOCK_WORDS*sizeof(uint16_t)) {
       mem->read16(spiAddress, memBlock, NUM_BLOCK_WORDS);
       while (mem->isReadBusy()) {}
@@ -69,15 +70,20 @@ bool spiTest(BASpiMemory *mem, int id)
       }
       if (spiErrorCount >= 10) break;
     }
-  
-    //if (spiErrorCount == 0) { Serial.println(String("SPI MEMORY(") + cnt + String("): Zero test PASSED!")); }
+
+    if (spiErrorCount == 0) { Serial.println(String("SPI MEMORY(") + cnt + String("): Zero test PASSED!")); }
     if (spiErrorCount == 0) { Serial.print("."); Serial.flush(); }
-    if (spiErrorCount > 0) { Serial.println(String("SPI MEMORY(") + cnt + String("): Zero test FAILED, error count = ") + spiErrorCount); return false;}
-    
+    if (spiErrorCount > 0) {
+      //Serial.println(String("SPI MEMORY(") + cnt + String("): Zero test FAILED, error count = ") + spiErrorCount); return false;
+      Serial.printf("SPI MEMORY: test %d  Zero test FAILED, error count:%d, final address:0x%08X\n\r",
+        cnt, spiErrorCount, spiAddress);
+      return false;
+    }
+
 
     // Write all test data to the memory
     maskPhase = 0;
-    for (spiAddress = 0; spiAddress <= SPI_MAX_ADDR; spiAddress += NUM_BLOCK_WORDS*sizeof(uint16_t)) {      
+    for (spiAddress = 0; spiAddress <= SPI_MAX_ADDR; spiAddress += NUM_BLOCK_WORDS*sizeof(uint16_t)) {
       // Calculate the data for a block
       for (int i=0; i<NUM_BLOCK_WORDS; i++) {
         memBlock[i] = calcData(spiAddress+i, loopPhase, maskPhase);
@@ -93,8 +99,8 @@ bool spiTest(BASpiMemory *mem, int id)
     maskPhase = 0;
 
     for (spiAddress = 0; spiAddress <= SPI_MAX_ADDR; spiAddress += NUM_BLOCK_WORDS*sizeof(uint16_t)) {
-            
-      mem->read16(spiAddress, memBlock, NUM_BLOCK_WORDS);        
+
+      mem->read16(spiAddress, memBlock, NUM_BLOCK_WORDS);
       // Calculate the golden data for a block
       for (int i=0; i<NUM_BLOCK_WORDS; i++) {
         goldData[i] = calcData(spiAddress+i, loopPhase, maskPhase);
@@ -107,7 +113,7 @@ bool spiTest(BASpiMemory *mem, int id)
           Serial.println(String("ERROR@ ") + i + String(": ") + goldData[i] + String("!=") + memBlock[i]);
           spiErrorCount++;
           if (spiErrorCount >= 10) break;
-        } 
+        }
         #ifdef SANITY_CHECK
         else {
           if ((spiAddress == 0) && (i<10)  && (cnt == 0) ){

src/BATypes.h

@@ -49,10 +49,10 @@ public:
 	/// returns 0 if success, otherwise error
 	int push_back(T element) {
 
-		//Serial.println(String("RingBuffer::push_back...") + m_head + String(":") + m_tail + String(":") + m_size);
+		//if (Serial) { Serial.println(String("RingBuffer::push_back...") + m_head + String(":") + m_tail + String(":") + m_size); }
 		if ( (m_head == m_tail) && (m_size > 0) ) {
 			// overflow
-			Serial.println("RingBuffer::push_back: overflow");
+			if (Serial) { Serial.println("RingBuffer::push_back: overflow"); }
 			return -1;
 		}
 
@@ -73,7 +73,7 @@ public:
 
 		if (m_size == 0) {
 			// buffer is empty
-			//Serial.println("RingBuffer::pop_front: buffer is empty\n");
+			// if (Serial) { Serial.println("RingBuffer::pop_front: buffer is empty\n"); }
 			return -1;
 		}
 		if (m_tail < m_maxSize-1) {
@@ -82,7 +82,7 @@ public:
 			m_tail = 0;
 		}
 		m_size--;
-		//Serial.println(String("RingBuffer::pop_front: ") + m_head + String(":") + m_tail + String(":") + m_size);
+		// if (Serial) { Serial.println(String("RingBuffer::pop_front: ") + m_head + String(":") + m_tail + String(":") + m_size); }
 		return 0;
 	}
 
@@ -141,8 +141,10 @@ public:
     /// DEBUG: Prints the status of the Ringbuffer. NOte using this much printing will usually cause audio glitches
     void print() const {
     	for (int idx=0; idx<m_maxSize; idx++) {
-    		Serial.print(idx + String(" address: ")); Serial.print((uint32_t)m_buffer[idx], HEX);
-    		Serial.print(" data: "); Serial.println((uint32_t)m_buffer[idx]->data, HEX);
+    		if (Serial) {
+				Serial.print(idx + String(" address: ")); Serial.print((uint32_t)m_buffer[idx], HEX);
+    		    Serial.print(" data: "); Serial.println((uint32_t)m_buffer[idx]->data, HEX);
+			}
     	}
     }
 private:

src/DmaSpi.h

@@ -58,8 +58,8 @@ class DummyChipSelect : public AbstractChipSelect
 **/
 class DebugChipSelect : public AbstractChipSelect
 {
-  void select(TransferType transferType = TransferType::NORMAL) override {Serial.println("Debug CS: select()");}
-  void deselect(TransferType transferType = TransferType::NORMAL) override {Serial.println("Debug CS: deselect()");}
+  void select(TransferType transferType = TransferType::NORMAL) override { if (Serial) Serial.println("Debug CS: select()");}
+  void deselect(TransferType transferType = TransferType::NORMAL) override { if (Serial) Serial.println("Debug CS: deselect()");}
 };
 
 /** \brief An active low chip select class. This also configures the given pin.
@@ -159,7 +159,7 @@ class ActiveLowChipSelect1 : public AbstractChipSelect
 
 
 #if defined(DEBUG_DMASPI)
-  #define DMASPI_PRINT(x) do {Serial.printf x ; Serial.flush();} while (0);
+  #define DMASPI_PRINT(x) do { if (Serial) { Serial.printf x ; Serial.flush();} } while (0);
 #else
   #define DMASPI_PRINT(x) do {} while (0);
 #endif
@@ -712,15 +712,17 @@ typename AbstractDmaSpi<DMASPI_INSTANCE, SPICLASS, m_Spi>::Transfer* volatile Ab
 template<typename DMASPI_INSTANCE, typename SPICLASS, SPICLASS& m_Spi>
 volatile uint8_t AbstractDmaSpi<DMASPI_INSTANCE, SPICLASS, m_Spi>::m_devNull = 0;
 
-//void dump_dma(DMAChannel *dmabc)
-//{
-//    Serial.printf("%x %x:", (uint32_t)dmabc, (uint32_t)dmabc->TCD);
-//
-//    Serial.printf("SA:%x SO:%d AT:%x NB:%x SL:%d DA:%x DO: %d CI:%x DL:%x CS:%x BI:%x\n", (uint32_t)dmabc->TCD->SADDR,
-//        dmabc->TCD->SOFF, dmabc->TCD->ATTR, dmabc->TCD->NBYTES, dmabc->TCD->SLAST, (uint32_t)dmabc->TCD->DADDR,
-//        dmabc->TCD->DOFF, dmabc->TCD->CITER, dmabc->TCD->DLASTSGA, dmabc->TCD->CSR, dmabc->TCD->BITER);
-//    Serial.flush();
-//}
+// void dump_dma(DMAChannel *dmabc)
+// {
+//   if (Serial) {
+//     Serial.printf("%x %x:", (uint32_t)dmabc, (uint32_t)dmabc->TCD);
+
+//     Serial.printf("SA:%x SO:%d AT:%x NB:%x SL:%d DA:%x DO: %d CI:%x DL:%x CS:%x BI:%x\n", (uint32_t)dmabc->TCD->SADDR,
+//         dmabc->TCD->SOFF, dmabc->TCD->ATTR, dmabc->TCD->NBYTES, dmabc->TCD->SLAST, (uint32_t)dmabc->TCD->DADDR,
+//         dmabc->TCD->DOFF, dmabc->TCD->CITER, dmabc->TCD->DLASTSGA, dmabc->TCD->CSR, dmabc->TCD->BITER);
+//     Serial.flush();
+//   }
+// }
 
 #if defined(__IMXRT1062__) // T4.0
 

src/common/AudioDelay.cpp

@@ -76,7 +76,9 @@ audio_block_t* AudioDelay::addBlock(audio_block_t *block)
 
 	} else {
 		// EXTERNAL memory
-		if (!m_slot) { Serial.println("addBlock(): m_slot is not valid"); }
+		if (!m_slot) {
+			if (Serial) { Serial.println("addBlock(): m_slot is not valid"); }
+		}
 
 		if (block) {
 
@@ -128,7 +130,7 @@ bool AudioDelay::getSamples(int16_t *dest, size_t offsetSamples, size_t numSampl
 bool AudioDelay::m_getSamples(int16_t *dest, size_t offsetSamples, size_t numSamples)
 {
 	if (!dest) {
-		Serial.println("getSamples(): dest is invalid");
+		if (Serial) { Serial.println("getSamples(): dest is invalid"); }
 		return false;
 	}
 
@@ -196,8 +198,8 @@ bool AudioDelay::m_getSamples(int16_t *dest, size_t offsetSamples, size_t numSam
 			return true;
 		} else {
 			// numSamples is > than total slot size
-			Serial.println("getSamples(): ERROR numSamples > total slot size");
-			Serial.println(numSamples + String(" > ") + m_slot->size());
+			if (Serial) { Serial.println("getSamples(): ERROR numSamples > total slot size"); }
+			if (Serial) { Serial.println(numSamples + String(" > ") + m_slot->size()); }
 			return false;
 		}
 	}

src/common/ExtMemSlot.cpp

@@ -332,12 +332,12 @@ bool ExtMemSlot::writeAdvance16(int16_t data)
 bool ExtMemSlot::enable() const
 {
 	if (m_spi) {
-		Serial.println("ExtMemSlot::enable()");
+		if (Serial) { Serial.println("ExtMemSlot::enable()"); }
 		m_spi->begin();
 		return true;
 	}
 	else {
-		Serial.println("ExtMemSlot m_spi is nullptr");
+		if (Serial) { Serial.println("ExtMemSlot m_spi is nullptr"); }
 		return false;
 	}
 }
@@ -365,10 +365,11 @@ bool ExtMemSlot::isReadBusy() const
 
 void ExtMemSlot::printStatus(void) const
 {
-	Serial.println(String("valid:") + m_valid + String(" m_start:") + m_start + \
+	if (Serial) { Serial.println(String("valid:") + m_valid + String(" m_start:") + m_start + \
 			       String(" m_end:") + m_end + String(" m_currentWrPosition: ") + m_currentWrPosition + \
 				   String(" m_currentRdPosition: ") + m_currentRdPosition + \
 				   String(" m_size:") + m_size);
+	}
 }
 
 }

src/common/ParameterAutomation.cpp

@@ -134,9 +134,9 @@ T ParameterAutomation<T>::getNextValue()
     } else {
         returnValue = m_startValue - (m_scaleY*value);
     }
-//    Serial.println(String("Start/End values: ") + m_startValue + String(":") + m_endValue);
-    //Serial.print("Parameter m_currentValueX is "); Serial.println(m_currentValueX, 6);
-    //Serial.print("Parameter returnValue is "); Serial.println(returnValue, 6);
+    // if (Serial) { Serial.println(String("Start/End values: ") + m_startValue + String(":") + m_endValue); }
+    // if (Serial) { Serial.print("Parameter m_currentValueX is "); Serial.println(m_currentValueX, 6); }
+    // if (Serial) { Serial.print("Parameter returnValue is "); Serial.println(returnValue, 6); }
     return returnValue;
 }
 
@@ -175,7 +175,7 @@ ParameterAutomationSequence<T>::~ParameterAutomationSequence()
 template <class T>
 void ParameterAutomationSequence<T>::setupParameter(int index, T startValue, T endValue, size_t durationSamples, typename ParameterAutomation<T>::Function function)
 {
-    Serial.println(String("setupParameter() called with samples: ") + durationSamples);
+    if (Serial) { Serial.println(String("setupParameter() called with samples: ") + durationSamples); }
     m_paramArray[index]->reconfigure(startValue, endValue, durationSamples, function);
     m_currentIndex = 0;
 }
@@ -183,7 +183,7 @@ void ParameterAutomationSequence<T>::setupParameter(int index, T startValue, T e
 template <class T>
 void ParameterAutomationSequence<T>::setupParameter(int index, T startValue, T endValue, float durationMilliseconds, typename ParameterAutomation<T>::Function function)
 {
-    Serial.print(String("setupParameter() called with time: ")); Serial.println(durationMilliseconds, 6);
+    if (Serial) { Serial.print(String("setupParameter() called with time: ")); Serial.println(durationMilliseconds, 6); }
     m_paramArray[index]->reconfigure(startValue, endValue, durationMilliseconds, function);
     m_currentIndex = 0;
 }
@@ -194,7 +194,7 @@ void ParameterAutomationSequence<T>::trigger(void)
     m_currentIndex = 0;
     m_paramArray[0]->trigger();
     m_running = true;
-    //Serial.println("ParameterAutomationSequence<T>::trigger() called");
+    // if (Serial) { Serial.println("ParameterAutomationSequence<T>::trigger() called"); }
 }
 
 template <class T>
@@ -204,17 +204,17 @@ T ParameterAutomationSequence<T>::getNextValue()
     T nextValue = m_paramArray[m_currentIndex]->getNextValue();
 
     if (m_running) {
-        //Serial.println(String("ParameterAutomationSequence<T>::getNextValue() is ") + nextValue
-        //        + String(" from stage ") + m_currentIndex);
+        // if (Serial) { Serial.println(String("ParameterAutomationSequence<T>::getNextValue() is ") + nextValue
+        //        + String(" from stage ") + m_currentIndex); }
 
         // If current stage is done, trigger the next
         if (m_paramArray[m_currentIndex]->isFinished()) {
-            Serial.println(String("Finished stage ") + m_currentIndex);
+            if (Serial) { Serial.println(String("Finished stage ") + m_currentIndex); }
             m_currentIndex++;
 
             if (m_currentIndex >= m_numStages) {
                 // Last stage already finished
-                Serial.println("Last stage finished");
+                if (Serial) { Serial.println("Last stage finished"); }
                 m_running = false;
                 m_currentIndex = 0;
             } else {

src/effects/AudioEffectAnalogDelay.cpp

@@ -3,7 +3,20 @@
  *
  *  Created on: Jan 7, 2018
  *      Author: slascos
- */
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.*
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #include <new>
 #include "AudioEffectAnalogDelayFilters.h"
 #include "AudioEffectAnalogDelay.h"
@@ -166,22 +179,26 @@ void AudioEffectAnalogDelay::delay(float milliseconds)
 {
 	size_t delaySamples = calcAudioSamples(milliseconds);
 
-	if (!m_memory) { Serial.println("delay(): m_memory is not valid"); return; }
+	if (!m_memory) {
+		if (Serial) { Serial.println("delay(): m_memory is not valid"); return; }
+	}
 
 	if (!m_externalMemory) {
 		// internal memory
 	    m_maxDelaySamples = m_memory->getMaxDelaySamples();
 		//QueuePosition queuePosition = calcQueuePosition(milliseconds);
-		//Serial.println(String("CONFIG: delay:") + delaySamples + String(" queue position ") + queuePosition.index + String(":") + queuePosition.offset);
+		// if (Serial) { Serial.println(String("CONFIG: delay:") + delaySamples + String(" queue position ") + queuePosition.index + String(":") + queuePosition.offset); }
 	} else {
 		// external memory
 		ExtMemSlot *slot = m_memory->getSlot();
 		m_maxDelaySamples = (slot->size() / sizeof(int16_t))-AUDIO_BLOCK_SAMPLES;
 
-		if (!slot) { Serial.println("ERROR: slot ptr is not valid"); }
+		if (!slot) {
+			if (Serial) { Serial.println("ERROR: slot ptr is not valid"); }
+		}
 		if (!slot->isEnabled()) {
 			slot->enable();
-			Serial.println("WEIRD: slot was not enabled");
+			if (Serial) { Serial.println("WEIRD: slot was not enabled"); }
 		}
 	}
 
@@ -194,16 +211,16 @@ void AudioEffectAnalogDelay::delay(float milliseconds)
 
 void AudioEffectAnalogDelay::delay(size_t delaySamples)
 {
-	if (!m_memory) { Serial.println("delay(): m_memory is not valid"); }
+	if (!m_memory) { if (Serial) Serial.println("delay(): m_memory is not valid"); }
 
 	if (!m_externalMemory) {
 		// internal memory
 	    m_maxDelaySamples = m_memory->getMaxDelaySamples();
 		//QueuePosition queuePosition = calcQueuePosition(delaySamples);
-		//Serial.println(String("CONFIG: delay:") + delaySamples + String(" queue position ") + queuePosition.index + String(":") + queuePosition.offset);
+		// if (Serial) { Serial.println(String("CONFIG: delay:") + delaySamples + String(" queue position ") + queuePosition.index + String(":") + queuePosition.offset); }
 	} else {
 		// external memory
-		//Serial.println(String("CONFIG: delay:") + delaySamples);
+		// if (Serial) { Serial.println(String("CONFIG: delay:") + delaySamples); }
 		ExtMemSlot *slot = m_memory->getSlot();
 		m_maxDelaySamples = (slot->size() / sizeof(int16_t))-AUDIO_BLOCK_SAMPLES;
 		if (!slot->isEnabled()) {
@@ -222,16 +239,16 @@ void AudioEffectAnalogDelay::delayFractionMax(float delayFraction)
 {
 	size_t delaySamples = static_cast<size_t>(static_cast<float>(m_memory->getMaxDelaySamples()) * delayFraction);
 
-	if (!m_memory) { Serial.println("delay(): m_memory is not valid"); }
+	if (!m_memory) { if (Serial) Serial.println("delay(): m_memory is not valid"); }
 
 	if (!m_externalMemory) {
 		// internal memory
 	    m_maxDelaySamples = m_memory->getMaxDelaySamples();
 		//QueuePosition queuePosition = calcQueuePosition(delaySamples);
-		//Serial.println(String("CONFIG: delay:") + delaySamples + String(" queue position ") + queuePosition.index + String(":") + queuePosition.offset);
+		// if (Serial) { Serial.println(String("CONFIG: delay:") + delaySamples + String(" queue position ") + queuePosition.index + String(":") + queuePosition.offset); }
 	} else {
 		// external memory
-		//Serial.println(String("CONFIG: delay:") + delaySamples);
+		// if (Serial) { Serial.println(String("CONFIG: delay:") + delaySamples); }
 		ExtMemSlot *slot = m_memory->getSlot();
 		m_maxDelaySamples = (slot->size() / sizeof(int16_t))-AUDIO_BLOCK_SAMPLES;
 		if (!slot->isEnabled()) {
@@ -284,23 +301,23 @@ void AudioEffectAnalogDelay::processMidi(int channel, int control, int value)
 		if (m_externalMemory) { m_maxDelaySamples = (m_memory->getSlot()->size() / sizeof(int16_t))-AUDIO_BLOCK_SAMPLES; }
 		size_t delayVal = (size_t)(val * (float)(m_maxDelaySamples));
 		delay(delayVal);
-		Serial.println(String("AudioEffectAnalogDelay::delay (ms): ") + calcAudioTimeMs(delayVal)
-				+ String(" (samples): ") + delayVal + String(" out of ") + m_maxDelaySamples);
+		if (Serial) { Serial.println(String("AudioEffectAnalogDelay::delay (ms): ") + calcAudioTimeMs(delayVal)
+				+ String(" (samples): ") + delayVal + String(" out of ") + m_maxDelaySamples); }
 		return;
 	}
 
 	if ((m_midiConfig[BYPASS][MIDI_CHANNEL] == channel) &&
         (m_midiConfig[BYPASS][MIDI_CONTROL] == control)) {
 		// Bypass
-		if (value >= 65) { bypass(false); Serial.println(String("AudioEffectAnalogDelay::not bypassed -> ON") + value); }
-		else { bypass(true); Serial.println(String("AudioEffectAnalogDelay::bypassed -> OFF") + value); }
+		if (value >= 65) { bypass(false); if (Serial) Serial.println(String("AudioEffectAnalogDelay::not bypassed -> ON") + value); }
+		else { bypass(true); if (Serial) Serial.println(String("AudioEffectAnalogDelay::bypassed -> OFF") + value); }
 		return;
 	}
 
 	if ((m_midiConfig[FEEDBACK][MIDI_CHANNEL] == channel) &&
         (m_midiConfig[FEEDBACK][MIDI_CONTROL] == control)) {
 		// Feedback
-		Serial.println(String("AudioEffectAnalogDelay::feedback: ") + 100*val + String("%"));
+		if (Serial) { Serial.println(String("AudioEffectAnalogDelay::feedback: ") + 100*val + String("%")); }
 		feedback(val);
 		return;
 	}
@@ -308,7 +325,7 @@ void AudioEffectAnalogDelay::processMidi(int channel, int control, int value)
 	if ((m_midiConfig[MIX][MIDI_CHANNEL] == channel) &&
         (m_midiConfig[MIX][MIDI_CONTROL] == control)) {
 		// Mix
-		Serial.println(String("AudioEffectAnalogDelay::mix: Dry: ") + 100*(1-val) + String("% Wet: ") + 100*val );
+		if (Serial) { Serial.println(String("AudioEffectAnalogDelay::mix: Dry: ") + 100*(1-val) + String("% Wet: ") + 100*val ); }
 		mix(val);
 		return;
 	}
@@ -316,7 +333,7 @@ void AudioEffectAnalogDelay::processMidi(int channel, int control, int value)
 	if ((m_midiConfig[VOLUME][MIDI_CHANNEL] == channel) &&
         (m_midiConfig[VOLUME][MIDI_CONTROL] == control)) {
 		// Volume
-		Serial.println(String("AudioEffectAnalogDelay::volume: ") + 100*val + String("%"));
+		if (Serial) { Serial.println(String("AudioEffectAnalogDelay::volume: ") + 100*val + String("%")); }
 		volume(val);
 		return;
 	}

src/effects/AudioEffectDelayExternal.cpp

@@ -67,7 +67,7 @@ void BAAudioEffectDelayExternal::delay(uint8_t channel, float milliseconds) {
 	unsigned mask = m_activeMask;
 	if (m_activeMask == 0) m_startUsingSPI(m_spiChannel);
 	m_activeMask = mask | (1<<channel);
-	Serial.print("DelayLengthInt: "); Serial.println(m_requestedDelayLength);
+	if (Serial) { Serial.print("DelayLengthInt: "); Serial.println(m_requestedDelayLength); }
 }
 
 void BAAudioEffectDelayExternal::disable(uint8_t channel) {

src/effects/AudioEffectRmsMeasure.cpp

@@ -3,7 +3,20 @@
  *
  *  Created on: March 7, 2020
  *      Author: slascos
- */
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.*
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #include <arm_math.h>
 #include "BALibrary.h"
 #include "AudioEffectRmsMeasure.h"
@@ -64,8 +77,7 @@ void AudioEffectRmsMeasure::update(void)
 	for (int i=0; i<AUDIO_BLOCK_SAMPLES; i++) {
 	    dotProduct += ((int64_t)inputAudioBlock->data[i] * (int64_t)inputAudioBlock->data[i]);
 	    if (dotProduct < 0) {
-	        Serial.println("DOT ERROR!");
-	        Serial.println(inputAudioBlock->data[i], HEX);
+	        if (Serial) { Serial.println("DOT ERROR!"); Serial.println(inputAudioBlock->data[i], HEX); }
 	    }
 	}
 	m_sum += (int64_t)(dotProduct);
@@ -80,11 +92,13 @@ void AudioEffectRmsMeasure::update(void)
 	    // dbfs = 20*log10(abs(rmsFigure)/32768.0f);
 	    m_dbfs = 20.0f * log10(m_rms/32768.0f);
 
-	    Serial.print("Accumulator: "); Serial.println((int)(m_sum >> 32), HEX);
-	    Serial.print("RAW RMS: "); Serial.println(m_rms);
+        if (Serial) {
+			Serial.print("Accumulator: "); Serial.println((int)(m_sum >> 32), HEX);
+			Serial.print("RAW RMS: "); Serial.println(m_rms);
 
-	    Serial.print("AudioEffectRmsMeasure: the RMS figure is "); Serial.print(m_dbfs);
-	    Serial.print(" dBFS over "); Serial.print(m_accumulatorCount); Serial.println(" audio blocks");
+			Serial.print("AudioEffectRmsMeasure: the RMS figure is "); Serial.print(m_dbfs);
+			Serial.print(" dBFS over "); Serial.print(m_accumulatorCount); Serial.println(" audio blocks");
+		}
 
 	    m_sum = 0;
 	    m_accumulatorCount = 0;

src/effects/AudioEffectSOS.cpp

@@ -3,7 +3,20 @@
  *
  *  Created on: Apr 14, 2018
  *      Author: blackaddr
- */
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.*
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 
 #include "AudioEffectSOS.h"
 #include "LibBasicFunctions.h"
@@ -63,7 +76,7 @@ void AudioEffectSOS::enable(void)
         // Because we hold the previous output buffer for an update cycle, the maximum delay is actually
         // 1 audio block mess then the max delay returnable from the memory.
         m_maxDelaySamples = m_memory->getMaxDelaySamples() - AUDIO_BLOCK_SAMPLES;
-        Serial.println(String("SOS Enabled with delay length ") + m_maxDelaySamples + String(" samples"));
+        if (Serial) { Serial.println(String("SOS Enabled with delay length ") + m_maxDelaySamples + String(" samples")); }
     }
     m_delaySamples = m_maxDelaySamples;
     m_inputGateAuto.setupParameter(GATE_OPEN_STAGE, 0.0f, 1.0f, 1000.0f, ParameterAutomation<float>::Function::EXPONENTIAL);
@@ -126,8 +139,8 @@ void AudioEffectSOS::update(void)
     // get the data. If using external memory with DMA, this won't be filled until
     // later.
     m_memory->getSamples(blockToOutput, m_delaySamples);
-    //Serial.println(String("Delay samples:") + m_delaySamples);
-    //Serial.println(String("Use dma: ") + m_memory->getSlot()->isUseDma());
+    // if (Serial) { Serial.println(String("Delay samples:") + m_delaySamples); }
+    // if (Serial) { Serial.println(String("Use dma: ") + m_memory->getSlot()->isUseDma()); }
 
     // If using DMA, we need something else to do while that read executes, so
     // move on to input preprocessing
@@ -157,7 +170,7 @@ void AudioEffectSOS::update(void)
     m_previousBlock = blockToOutput;
 
     if (m_blockToRelease == m_previousBlock) {
-        Serial.println("ERROR: POINTER COLLISION");
+        if (Serial) { Serial.println("ERROR: POINTER COLLISION"); }
     }
 
     if (m_blockToRelease) { release(m_blockToRelease); }
@@ -190,7 +203,7 @@ void AudioEffectSOS::processMidi(int channel, int control, int value)
         (m_midiConfig[GATE_OPEN_TIME][MIDI_CONTROL] == control)) {
         // Gate Open Time
         gateOpenTime(val * MAX_GATE_OPEN_TIME_MS);
-        Serial.println(String("AudioEffectSOS::gate open time (ms): ") + m_openTimeMs);
+        if (Serial) { Serial.println(String("AudioEffectSOS::gate open time (ms): ") + m_openTimeMs); }
         return;
     }
 
@@ -198,14 +211,14 @@ void AudioEffectSOS::processMidi(int channel, int control, int value)
         (m_midiConfig[GATE_CLOSE_TIME][MIDI_CONTROL] == control)) {
         // Gate Close Time
         gateCloseTime(val * MAX_GATE_CLOSE_TIME_MS);
-        Serial.println(String("AudioEffectSOS::gate close time (ms): ") + m_closeTimeMs);
+        if (Serial) { Serial.println(String("AudioEffectSOS::gate close time (ms): ") + m_closeTimeMs); }
         return;
     }
 
     if ((m_midiConfig[FEEDBACK][MIDI_CHANNEL] == channel) &&
         (m_midiConfig[FEEDBACK][MIDI_CONTROL] == control)) {
         // Feedback
-        Serial.println(String("AudioEffectSOS::feedback: ") + 100*val + String("%"));
+        if (Serial) { Serial.println(String("AudioEffectSOS::feedback: ") + 100*val + String("%")); }
         feedback(val);
         return;
     }
@@ -213,7 +226,7 @@ void AudioEffectSOS::processMidi(int channel, int control, int value)
     if ((m_midiConfig[VOLUME][MIDI_CHANNEL] == channel) &&
         (m_midiConfig[VOLUME][MIDI_CONTROL] == control)) {
         // Volume
-        Serial.println(String("AudioEffectSOS::volume: ") + 100*val + String("%"));
+        if (Serial) { Serial.println(String("AudioEffectSOS::volume: ") + 100*val + String("%")); }
         volume(val);
         return;
     }
@@ -221,15 +234,15 @@ void AudioEffectSOS::processMidi(int channel, int control, int value)
     if ((m_midiConfig[BYPASS][MIDI_CHANNEL] == channel) &&
         (m_midiConfig[BYPASS][MIDI_CONTROL] == control)) {
         // Bypass
-        if (value >= 65) { bypass(false); Serial.println(String("AudioEffectSOS::not bypassed -> ON") + value); }
-        else { bypass(true); Serial.println(String("AudioEffectSOS::bypassed -> OFF") + value); }
+        if (value >= 65) { bypass(false); if (Serial) Serial.println(String("AudioEffectSOS::not bypassed -> ON") + value); }
+        else { bypass(true); if (Serial) Serial.println(String("AudioEffectSOS::bypassed -> OFF") + value); }
         return;
     }
 
     if ((m_midiConfig[GATE_TRIGGER][MIDI_CHANNEL] == channel) &&
         (m_midiConfig[GATE_TRIGGER][MIDI_CONTROL] == control)) {
         // The gate is triggered by any value
-        Serial.println(String("AudioEffectSOS::Gate Triggered!"));
+        if (Serial) { Serial.println(String("AudioEffectSOS::Gate Triggered!")); }
         m_inputGateAuto.trigger();
         return;
     }
@@ -237,7 +250,7 @@ void AudioEffectSOS::processMidi(int channel, int control, int value)
     if ((m_midiConfig[CLEAR_FEEDBACK_TRIGGER][MIDI_CHANNEL] == channel) &&
         (m_midiConfig[CLEAR_FEEDBACK_TRIGGER][MIDI_CONTROL] == control)) {
         // The gate is triggered by any value
-        Serial.println(String("AudioEffectSOS::Clear feedback Triggered!"));
+        if (Serial) { Serial.println(String("AudioEffectSOS::Clear feedback Triggered!")); }
         m_clearFeedbackAuto.trigger();
         return;
     }

src/effects/AudioEffectTremolo.cpp

@@ -3,7 +3,21 @@
  *
  *  Created on: Jan 7, 2018
  *      Author: slascos
- */
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.*
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #include <cmath> // std::roundf
 #include "AudioEffectTremolo.h"
 
@@ -62,16 +76,6 @@ void AudioEffectTremolo::update(void)
 		float sample = std::roundf(mod[i] * (float)inputAudioBlock->data[i]);
 		inputAudioBlock->data[i] = (int16_t)sample;
 	}
-	//Serial.println(String("mod: ") + mod[0]);
-
-
-
-	//float mod = (m_osc.getNext()+1.0f)/2.0f; // value between -1.0 and +1.0f
-	//float modVolume =  (1.0f - m_depth) + mod*m_depth; // value between 0 to depth
-	//float finalVolume = m_volume * modVolume;
-
-	// Set the output volume
-	//gainAdjust(inputAudioBlock, inputAudioBlock, finalVolume, 1);
 
 	transmit(inputAudioBlock);
 	release(inputAudioBlock);
@@ -97,8 +101,8 @@ void AudioEffectTremolo::processMidi(int channel, int control, int value)
 	if ((m_midiConfig[BYPASS][MIDI_CHANNEL] == channel) &&
         (m_midiConfig[BYPASS][MIDI_CONTROL] == control)) {
 		// Bypass
-		if (value >= 65) { bypass(false); Serial.println(String("AudioEffectTremolo::not bypassed -> ON") + value); }
-		else { bypass(true); Serial.println(String("AudioEffectTremolo::bypassed -> OFF") + value); }
+		if (value >= 65) { bypass(false); if (Serial) Serial.println(String("AudioEffectTremolo::not bypassed -> ON") + value); }
+		else { bypass(true); if (Serial) Serial.println(String("AudioEffectTremolo::bypassed -> OFF") + value); }
 		return;
 	}
 
@@ -106,7 +110,7 @@ void AudioEffectTremolo::processMidi(int channel, int control, int value)
         (m_midiConfig[RATE][MIDI_CONTROL] == control)) {
 		// Rate
 		rate(val);
-		Serial.println(String("AudioEffectTremolo::rate: ") + m_rate);
+		if (Serial) { Serial.println(String("AudioEffectTremolo::rate: ") + m_rate); }
 		return;
 	}
 
@@ -114,7 +118,7 @@ void AudioEffectTremolo::processMidi(int channel, int control, int value)
         (m_midiConfig[DEPTH][MIDI_CONTROL] == control)) {
 		// Depth
 		depth(val);
-		Serial.println(String("AudioEffectTremolo::depth: ") + m_depth);
+		if (Serial) { Serial.println(String("AudioEffectTremolo::depth: ") + m_depth); }
 		return;
 	}
 
@@ -133,14 +137,14 @@ void AudioEffectTremolo::processMidi(int channel, int control, int value)
 			m_waveform = Waveform::RANDOM;
 		}
 
-		Serial.println(String("AudioEffectTremolo::waveform: ") + static_cast<unsigned>(m_waveform));
+		if (Serial) { Serial.println(String("AudioEffectTremolo::waveform: ") + static_cast<unsigned>(m_waveform)); }
 		return;
 	}
 
 	if ((m_midiConfig[VOLUME][MIDI_CHANNEL] == channel) &&
         (m_midiConfig[VOLUME][MIDI_CONTROL] == control)) {
 		// Volume
-		Serial.println(String("AudioEffectTremolo::volume: ") + 100*val + String("%"));
+		if (Serial) { Serial.println(String("AudioEffectTremolo::volume: ") + 100*val + String("%")); }
 		volume(val);
 		return;
 	}

src/peripherals/BAAudioControlWM8731.cpp

@@ -136,7 +136,7 @@ BAAudioControlWM8731::~BAAudioControlWM8731()
 // Powerdown and disable the codec
 void BAAudioControlWM8731::disable(void)
 {
-	//Serial.println("Disabling codec");
+	// if (Serial) { Serial.println("Disabling codec"); }
 	if (m_wireStarted == false) {
 	    Wire.begin();
 	    m_wireStarted = true;
@@ -161,7 +161,7 @@ void BAAudioControlWM8731::enable(void)
 
 	disable(); // disable first in case it was already powered up
 
-	//Serial.println("Enabling codec");
+	// if (Serial) { Serial.println("Enabling codec"); }
 	if (m_wireStarted == false) {
 	    Wire.begin();
 	    m_wireStarted = true;
@@ -398,10 +398,9 @@ bool BAAudioControlWM8731::write(unsigned int reg, unsigned int val)
 		Wire.write(val & 0xFF);
 		byte error = Wire.endTransmission();
 		if (error) {
-			Serial.println(String("Wire::Error: ") + error + String(" retrying..."));
+			if (Serial) { Serial.println(String("Wire::Error: ") + error + String(" retrying...")); }
 		} else {
 			done = true;
-			//Serial.println("Wire::SUCCESS!");
 		}
 	}
 
@@ -427,7 +426,7 @@ void BAAudioControlWM8731master::enable(void)
 
     disable(); // disable first in case it was already powered up
 
-    //Serial.println("Enabling codec");
+    // if (Serial) { Serial.println("Enabling codec"); }
     if (m_wireStarted == false) {
         Wire.begin();
         m_wireStarted = true;

src/peripherals/BAPhysicalControls.cpp

@@ -22,11 +22,11 @@
 // These calls must be define in order to get vector to work on arduino
 namespace std {
 void __throw_bad_alloc() {
-  Serial.println("Unable to allocate memory");
+  if (Serial) { Serial.println("Unable to allocate memory"); }
   abort();
 }
 void __throw_length_error( char const*e ) {
-  Serial.print("Length Error :"); Serial.println(e);
+  if (Serial) { Serial.print("Length Error :"); Serial.println(e); }
   abort();
 }
 }
@@ -337,6 +337,8 @@ void Potentiometer::setChangeThreshold(float changeThreshold)
 Potentiometer::Calib Potentiometer::calibrate(uint8_t pin) {
 	Calib calib;
 
+    if (!Serial) { return; }  // this function REQUIRES Serial port connection
+
 	// Flush the serial port input buffer
 	while (Serial.available() > 0) {}
 

src/peripherals/BASpiMemory.cpp

@@ -24,20 +24,6 @@
 
 namespace BALibrary {
 
-//// MEM0 Settings
-//int SPI_CS_MEM0   = SPI0_CS_PIN;
-//int SPI_MOSI_MEM0 = SPI0_MOSI_PIN;
-//int SPI_MISO_MEM0 = SPI0_MISO_PIN;
-//int SPI_SCK_MEM0  = SPI0_SCK_PIN;
-//
-//#if defined(SPI1_AVAILABLE)
-//// MEM1 Settings
-//int SPI_CS_MEM1   = SPI1_CS_PIN;
-//int SPI_MOSI_MEM1 = SPI1_MOSI_PIN;
-//int SPI_MISO_MEM1 = SPI1_MISO_PIN;
-//int SPI_SCK_MEM1  = SPI1_SCK_PIN;
-//#endif
-
 // SPI Constants
 constexpr int SPI_WRITE_MODE_REG = 0x1;
 constexpr int SPI_WRITE_CMD = 0x2;

src/peripherals/DmaSpi.cpp

@@ -1,3 +1,22 @@
+/*
+ * DmaSpi.cpp
+ *
+ *  Created on: Jan 7, 2018
+ *      Author: slascos
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.*
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #include "DmaSpi.h"
 
 #if defined(__IMXRT1062__) // T4.X